Search

This study develops and applies the PROMETHEE-GAIA method as a new tool to select microalgae strains for aviation fuel production. Assessment involves 19 criteria with equal weighting in three aspects, namely biomass production, lipid quality, and fatty acid methylester properties. Here, the method is demonstrated for evaluating 17 candidate microalgae strains. Chlorella sp. NT8a is assessed as the most suitable strain for aviation fuel production. The results also show that unmodified biofuel from the most suitable strain could not meet all jet fuel standards. In particular, microalgae-based fuel could not satisfy the required density, heating value and freezing points of the international jet fuel standards. These results highlight the need for a broad action plan including improvement in the processing or modification of biofuel produced from microalgae and revision of the current jet fuel standards to facilitate the introduction of microalgae-based biofuel for the aviation industry., (Crown Copyright © 2021. Published by Elsevier Ltd. All rights reserved.)

The utilization of microalgae in treating wastewater has been an emerging topic focussed on finding an economically sustainable and environmentally friendly approach to treating wastewater. Over the last several years, different types of con microalgae and bacteria consortia have been experimented with to explore their potential in effectively treating wastewater from different sources. The basic features considered while determining efficiency is their capacity to remove nutrients including nitrogen (N) and phosphorus (P) and heavy metals like arsenic (As), lead (Pb), and copper (Cu). This paper reviews the efficiency of microalgae as an approach to treating wastewater from different sources and compares conventional and microalgae-based treatment systems. The paper also discusses the characteristics of wastewater, conventional methods of wastewater treatment that have been used so far, and the technological mechanisms for removing nutrients and heavy metals from contaminated water. Microalgae can successfully eliminate the suspended nutrients and have been reported to successfully remove N, P, and heavy metals by up to 99.6 %, 100 %, and 13%-100 % from different types of wastewater. However, although a microalgae-based wastewater treatment system offers some benefits, it also presents some challenges as outlined in the last section of this paper. Performance in eliminating nutrients from wastewater is affected by different parameters such as temperature, biomass productivity, osmotic ability, pH, O 2 concentration. Therefore, the conducting of pilot-scale studies and exploration of the complexities of contaminants under complex environmental conditions is recommended., (Copyright © 2021. Published by Elsevier Ltd.)

Microalgae originating from wastewater has been exhibiting particularly promising results in terms of biohydrogen production and wastewater treatment. This paper aims to review the factors affecting production, pretreatment techniques to improve synthesis, advanced technologies utilized for enhancing biohydrogen production, and techno-economic feasibility evaluation of the processes at a commercial scale. Microalgae possess metabolic components to synthesize biohydrogen using photobiological and fermentative processes but must undergo pretreatment for efficient biohydrogen production. The efficiency of these processes is influenced by factors such as the microalgae species, light intensity, cell density, pH, temperature, substrates, and the type of bioreactors. Moreover, many limitations, such as oxygen sensitivity, altered thylakoid constitution, low photon conversion efficiency, light capture disruption, and the evolution of harmful by-products hinder the sustainability of biohydrogen production processes. High operational and maintenance costs serve as the major bottleneck in the scaling up of the process as an industrial technology. Therefore, future research needs to be directed towards increasing optimization of the processes by reducing energy and resource demand, recycling metabolic wastes and process components, genetically engineered microalgae to adopt more efficient routes, and conducting pilot studies for commercialization. • Wastewater-based microalgae is a potential source of biohydrogen. • Factors affecting the biohydrogen production from microalgal biomass are discussed. • Technologies related to biohydrogen production from microalgae are reviewed. • Key challenges of biohydrogen production process from microalgae are highlighted. [ABSTRACT FROM AUTHOR]

Microalgae are photosynthetic cell factories of global interest for fuels, food, feed, bioproducts, carbon sequestration, waste mitigation, and environmental remediation. Actually, microalgal monocultures are used for biomass production and pollutant removal, yet are limited by moderate production and contaminations. Here we review binary cultures of autotrophic microalgae with bacteria, yeast, fungi, and heterotrophic microalgae, with focus on growth, lipid accumulation, bioremediation, wastewater treatment, and cost-effective harvesting. We found that a controlled, symbiotic binary culture facilitates waste bioremediation and biomass harvesting, with 96% efficiency, and reduces cost by 20–30%. Noteworthy, in binary or polyculture systems, autotrophic microalgae often develop a symbiosis by exchanging nutrients and metabolites with heterotrophic microalgae, bacteria, yeast, fungi, which may help to achieve higher biomass production. [ABSTRACT FROM AUTHOR]

Microalgae has received overwhelming attention worldwide as a sustainable source for energy generation. However, the production of biofuel from microalgae biomass consists of several steps, of which lipid extraction is the most important one. Because of the nature of feedstock, extraction needs special attention. Three different methods were studied to extract algal oil from two different algae variant, Chlorella sp. and Spirulina sp. The highest percentage oil yield was obtained by ultrasonication (9.4% for Chlorella sp., 6.6% for Spirulina sp.) followed by the Soxhlet and solvent extraction processes. Ultrasonication and Soxhlet extraction processes were further optimized to maximize oil extraction as solvent extraction was not effective in extracting lipid. For ultrasonication, an amplitude of 90% recorded the highest percentage yield of oil for Spirulina sp. and a 70% amplitude recorded the highest percentage yield of oil for Chlorella sp. On the other hand, for Soxhlet extraction, a combination of chloroform, hexane, and methanol at a 1:1:1 ratio resulted in the highest yield of algal oil. Afterward, the crude algae oil from the ultrasonication process was transesterified for 5 h using an immobilized lipase (Novozyme 435) at 40 °C to convert triglycerides into fatty acid methyl ester and glycerol. Thus, ultrasonic-assisted lipid extraction was successful in producing biodiesel from both the species. [ABSTRACT FROM AUTHOR]

• Novel conceptual methods for tuning microalgae to aviation biofuel were presented. • Conversion methods that directly act on wet algae biomass are highly desired. • Chemical methods are able to obtain a maximum lipid yield of 98% • Microalgae bio-jet fuel parameters are compiled with ASTM standards. • Zeolite catalytic pyrolysis increased the bio-oil yield from Microalgae to 80 %. Concerns have been raised about the effects of fossil fuel combustion on global warming and climate change. Fuel consumer behavior is also heavily influenced by factors such as fluctuating fuel prices and the need for a consistent and reliable fuel supply. Microalgae fuel is gaining popularity in the aviation industry as a potential source of energy diversification. Microalgae can grow in saltwater or wastewater, capture CO 2 from the atmosphere and produce lipids without requiring a large amount of land. As a result, the production of oil from microalgae poses no threat to food availability. The low carbon footprint of microalgae-derived fuels has the potential to mitigate the impact of traditional aviation fuels derived from petroleum on climate change and global warming. Therefore, aviation fuels derived from microalgae have the potential to be a more environmentally friendly and sustainable alternative to conventional fuels. Gathering microalgal species with a high lipid content, drying them, and turning them into aviation fuel is an expensive process. The use of biofuels derived from microalgae in the aviation industry is still in its infancy, but there is room for growth. This study analyses the potential routes already researched, their drawbacks in implementation, and the many different conceptual approaches that can be used to produce sustainable aviation fuel from microalgal lipids. Microalgae species with fast-growing rates require less space and generate lipids that can be converted into biofuel without imperiling food security. The key challenges in algal-based aviation biofuel include decreased lipid content, harvesting expenses, and drying procedure that should be enhanced and optimized to increase process viability. [ABSTRACT FROM AUTHOR]

[Display omitted] • Biorefinery concept for sustainable processing of microalgae biomass has been discussed. • Reactor technologies for cultivating microalgae has been reviewed. • Factors affecting the microalgae culture system has been reviewed. • Different technologies to convert microalgae into biofuel and value-added products have been presented. • The utilisation of a biorefinery concept can make the valorisation of microalgae economically viable. Microalgal biomass has been proved to be a sustainable source for biofuels including bio-oil, biodiesel, bioethanol, biomethane, etc. One of the collateral benefits of integrating the use of microalgal technologies in the industry is microalgae's ability to capture carbon dioxide during the application and biomass production process and consequently reducing carbon dioxide emissions. Although microalgae are a feasible source of biofuel, industrial microalgae applications face energy and cost challenges. To overcome these challenges, researchers have been interested in applying the bio-refinery approach to extract the important components encapsulated in microalgae. This review discusses the key steps of microalgae-based biorefinery including cultivation and harvesting, cell disruption, biofuel and value-added compound extraction along with the detailed technologies associated with each step of biorefinery. This review found that suitable microalgae species are selected based on their carbohydrate, lipid and protein contents and selecting the suitable species are crucial for high-quality biofuel and value-added products production. Microalgae species contain carbohydrates, proteins and lipids in the range of 8% to 69.7%, 5% to 74% and 7% to 65% respectively which proved their ability to be used as a source of value-added commodities in multiple industries including agriculture, animal husbandry, medicine, culinary, and cosmetics. This review suggests that lipid and value-added products from microalgae can be made more economically viable by integrating upstream and downstream processes. Therefore, a systematically integrated genome sequencing and process-scale engineering approach for improving the extraction of lipids and co-products is critical in the development of future microalgal biorefineries. [ABSTRACT FROM AUTHOR]

Microalgae have been widely explored because of the diverse number of their worthwhile applications and potential as a source biomass for the production of biofuels and value-added materials. However, downstream techniques have yet to be fully developed to overcome techno-economic barriers. Flocculation is a superior method for harvesting microalgae from growth medium because of its harvesting efficiency, economic feasibility. Various kind of bio-flocculation harvesting methods are consider as attractive low cost and environmentally friendly options and able to harvest >90% biomass. Lipid recovery from microalgal cells is a major barrier for the biofuel industry because of process complexity and algae cell structure. Thus, the pretreatment method is necessary to disrupt the cell walls of microalgae and enhance lipid extraction. Many techniques, including dry methods of extraction, are already being implemented but found out that they are not efficient and cost-effective. Various new wet harvesting strategies have been claimed to extract major lipids in cost-efficient (30% less than conventional) way as wet technologies can eliminate the cost of cell drying and associated instruments. It is necessary to develop new methods which are energy and cost-effective, and environmentally friendlier for the commercialization of biofuels. Therefore, this review presents the advances in the progress of various flocculation harvesting methods with special emphasis on innovative bio-flocculation, the underlying mechanism of microalgae and flocculation. In this study also summarize the recent progress on microalgal oil extraction processes, and comparison was made between the processes in terms of sustainability, technology readiness, and applications in larger scales. Image 1 • Approaches of the different methods of flocculation have been outlined in depth. • Bio-based flocculation methods could significantly reduce cost of microalgae harvesting. • Green extraction approaches reduce time and energy for industrial viability. • Judicious selection of harvesting and lipid extraction methods ensures economical biofuel production. • Appropriate policy framework is required for commercialization of microalgae biofuels. [ABSTRACT FROM AUTHOR]

[Display omitted] • Cationic PAETAC & PAmPTAC were synthesized by UV-induced radical polymerization. • New polymers showed good flocculation performance of freshwater & marine microalgae. • Optimal doses of PAETAC were 50 and 4.8 mg/g for C. vulgaris & P. purpureum. • PAETAC and PAmPTAC produced stable flocs, supporting simple dewatering step. This study addresses the challenge of microalgae harvesting through the development of flocculants. Two positively charged cationic polymers including poly[2 (acryloyloxy)ethyl]trimethylammonium chloride (PAETAC) and poly(3 acrylamidopropyl)trimethylammonium chloride (PAmPTAC) were synthesized using the UV-induced radical polymerization, for harvesting both freshwater and marine microalgae. The results show that the synthesized polymers have excellent flocculation performance for both freshwater green microalgae (Chlorella vulgaris) and marine red microalgae (Porphyridium purpureum). PAETAC outperformed PAmPTAC for both Chlorella vulgaris and Porphyridium purpureum microalgae. The optimal PAETAC doses for Chlorella vulgaris and Porphyridium purpureum microalgae were 50 and 4.8 mg/g of dry biomass while the optimal PAmPTAC doses were 252 and 35 mg/g of dry biomass respectively. Additionally, the floc formation with the PAETAC was more stable than PAmPTAC, which supported the dewatering step via sieving. The superior performance can be attributed to the higher molecular weight of the PAETAC polymer when compared to the PAmPTAC polymer. In comparison to commercially available polydiallyldimethylammonium chloride (PolyDADMAC), the newly synthesised PAETAC and PAmPTAC polymers demonstrated superior flocculation efficiency at a lower dose. The findings of this study established a platform technology for designing and synthesising cationic flocculants for use in microalgae harvesting. [ABSTRACT FROM AUTHOR]