Search

The present paper aims to find some new midpoint-type inequalities for twice quantum differentiable convex functions. The consequences derived in this paper are unification and generalization of the comparable consequences in the literature on midpoint inequalities. © 2021 Muhammad Aamir Ali et al., published by De Gruyter. National Natural Science Foundation of China, NSFC: 11301127, 11601485, 11626101, 11701176, 11971241, 61673169 Funding information : The work was supported by the Natural Science Foundation of China (Grant Nos. 61673169, 11301127, 11701176, 11626101, 11601485, 11971241). 2-s2.0-85105011594

In this paper we give Hadamard inequalities for exponentially $ (\alpha, h-m) $-convex functions using Riemann-Liouville fractional integrals for strictly increasing function. Results for Riemann-Liouville fractional integrals of convex, $ m $-convex, $ s $-convex, $ (\alpha, m) $-convex, $ (s, m) $-convex, $ (h-m) $-convex, $ (\alpha, h-m) $-convex, exponentially convex, exponentially $ m $-convex, exponentially $ s $-convex, exponentially $ (s, m) $-convex, exponentially $ (h-m) $-convex, exponentially $ (\alpha, h-m) $-convex functions are particular cases of the results of this paper. The error estimations of these inequalities by using two fractional integral identities are also given.

This paper argues that any economic phenomena should be observed by two different scales, and any economic laws are scale-dependent. A one-scale law arising in either macroeconomics or microeconomics might be mathematically correct and economically relevant, however, sparking debates might arise for a different scale. This paper re-analyzes the basic assumptions of the Evans model for dynamic economics, and it concludes that they are quite reasonable on a large time-scale, but the assumptions become totally invalid on a smaller scale, and a fractal modification has to be adopted. A two-scale price dynamics is suggested and a fractal variational theory is established to maximize the profit at a given period. Furthermore Evans 1924 variational principle for the maximal profit is easy to be solved for a quadratic cost function using the Lagrange multiplier method. Here a quadratic-cubic cost function and a nonlinear demand function are used, and the stationary condition of the variational formulation is derived step by step, and a more complex dynamic system is obtained. The present derivation process can be extended to a more complex cost function and a more complex demand function, and the paper sheds a promising light on mathematics treatment of complex economic problems.

The aim of this paper is to study the solvability of solutions of non-local problems with integral conditions in spatial variables for high-order linear parabolic equations in the classes of regular solutions (which have all the squared derivatives generalized by S. L. Sobolev that are included in the corresponding equation) . Previously, similar problems were studied for high-order parabolic equations, either in the one-dimensional case, or when certain conditions of smallness on the coefficients are met equations. In this paper, we present new results on the solvability of non-local problems with integral spatial variables for high-order parabolic equations a) in the multidimensional case with respect to spatial variables; b) in the absence of smallness conditions. The research method is based on the transition from a problem with non-local integral conditions to a problem with classical homogeneous conditions of the first or second kind on the side boundary for a loaded integro-differential equation. At the end of the paper, some generalizations of the obtained results will be described.

The B-spline curves have been grasped tremendous achievements inside the widely identified field of Computer Aided Geometric Design (CAGD). In CAGD, spline functions have been used for the designing of various objects. In this paper, new Quadratic Trigonometric B-spline (QTBS) functions with two shape parameters are introduced. The proposed QTBS functions inherit the basic properties of classical B-spline and have been proved in this paper. The proposed scheme associated with two shape parameters where the classical B-spline functions do not have. The QTBS has been used for designing of different parts of airplane like winglet, airfoil, turbo-machinery blades and vertical stabilizer. The designed part can be controlled or changed using free parameters. The effect of shape parameters is also expressed.

This paper proposes a simple, accurate and effective empirical formula to determine the number of supporting nodes in a newly-developed method, the localized method of fundamental solutions (LMFS). The LMFS has the merits of meshless, high-accuracy and easy-to-simulation in large-scale problems, but the number of supporting nodes has a certain impact on the accuracy and stability of the scheme. By using the curve fitting technique, this study established a simple formula between the number of supporting nodes and the node spacing. Based on the developed formula, the reasonable number of supporting nodes can be determined according to the node spacing. Numerical experiments confirmed the validity of the proposed methodology. This paper perfected the theory of the LMFS, and provided a quantitative selection strategy of method parameters.

This paper focuses on the finite-time anti-synchronization for a class of delayed master-slave inertial neural networks. By means of using the property of quadratic inequality of one variable and designing the fractional and polynomial controllers of time variable, two sufficient conditions to assure the finite-time anti-synchronization for the master-slave delayed inertial neural networks are established. Our controllers designed related to time variable t and the study method on the finite-time anti-synchronization are different from these in the existing papers.

This paper studies uniform convergence rate of Hermite\,--\,Pad\'eapproximants (simultaneous Pad\'e approximants)$\{\pi^j_{n,\overrightarrow{m}}(z)\}_{j=1}^k$for a system of exponential functions $\{e^{\lambda_jz}\}_{j=1}^k$,where $\{\lambda_j\}_{j=1}^k$ are different nonzerocomplex numbers. In the general case a research of theasymptotic properties of Hermite\,--\,Pad\'e approximants is arather complicated problem. This is due to the fact that in theirstudy mainly asymptotic methods are used, in particular,the saddle-point method. An important phase in the applicationof this method is to find a special saddle contour (the Cauchyintegral theorem allows to choose an integration contour ratherarbitrarily), according to which integration should be carriedout. Moreover, as a rule, one has to repy only on intuition.In this paper, we propose a new method to studying the asymptotic properties of Hermite\,--\,Pad\'eapproximants, that is based on the Taylor theorem and heuristicconsiderations underlying the Laplace and saddle-point methods,as well as on the multidimensional analogue of the Van Rossumidentity that we obtained. The proved theorems complement andgeneralize the known results by other authors.

Venture capital exit strategy is a key condition of realizing venture capital appreciation and circular operation. Based on the equity sale method of venture capital exit, this paper explores strategic choices of venture capitalists and venture entrepreneurs for external investment, and constructs a venture capital exit strategy model with the paradigm of classical game theory and quantum game theory, respectively. A series of experiments demonstrated the proposed method can achieve the unification of Nash equilibrium and Pareto equilibrium. Therefore, this paper expands the basic theoretical support and provide practical support for the choice of venture capital exit strategies.

The aim of this paper is to generalize the results regarding fractals and prove escape conditions for general complex polynomial. In this paper we state the orbit of a newly defined iterative scheme and establish the escape criteria in fractal generation for general complex polynomial. We use established escape criteria in algorithms to generate Mandelbrot and Multi-corns sets. In addition, we present some graphs of quadratic, cubic and higher Mandelbrot and Multi-corns sets and discuss how the alteration in parameters make changes in graphs.

In this paper, several oscillation criteria for a class of higher order dynamic equations with superlinear neutral term are established. The proposed results provide a unified platform that adequately covers both discrete and continuous equations and further sufficiently comments on oscillatory behavior of more general class of equations than the ones reported in the literature. We conclude the paper by demonstrating illustrative examples.

This paper presents a simplified model of the population migration problem, addressed to first-year engineering students in order to show them the use of linear algebra tools. The study consists of predicting the census in the city centre and in the suburbs, determining the city population equilibrium point, and making a sociological interpretation of population flows. This practical problem is part of the seminar “Applications of Linear Algebra in Engineering”, which is being held at the Universitat Politècnica de Catalunya-BarcelonaTech (UPC). This seminar consists in the learning of linear algebra by the implementation of real applications where mathematical tools are required to resolve them. This paper presents an application of linear algebra to the population migration problem and analyses students’ appreciation through anonymous surveys and personal interviews. The surveys assessed students’ motivation towards the subject of linear algebra and their learning of mathematical concepts. Personal interviews were conducted for students in order to let them express in detail their opinion about the seminar. The results confirm that the introduction of real applications in the learning of mathematics increases students’ motivation and involvement, which implies an improvement in students’ performance in the first courses of STEM degrees. Peer Reviewed Objectius de Desenvolupament Sostenible::4 - Educació de Qualitat

The present paper is devoted to studying the maps corresponding to the suborbital graphs for the normalizer ΓB(N) of Γ0(N) modulo N, where N denotes a positive integer. We reveal the complete structure of these maps, finding their vertices, edges, darts, and faces explicitly. The maps we investigated in the present paper were all regular maps of large genus except for some low values of N.

Covering rough set is a classical generalization of rough set. As covering rough set is a mathematical tool to deal with incomplete and incomplete data, it has been widely used in various fields. The aim of this paper is to extend the covering rough sets to interval neutrosophic sets, which can make multi-attribute decision making problem more tractable. Interval neutrosophic covering rough sets can be viewed as the bridge connecting Interval neutrosophic sets and covering rough sets. Firstly, the paper introduces the definition of interval neutrosophic sets and covering rough sets, where the covering rough set is defined by neighborhood. Secondly, Some basic properties and operation rules of interval neutrosophic sets and covering rough sets are discussed. Thirdly, the definition of interval neutrosophic covering rough sets are proposed. Then, some theorems are put forward and their proofs of interval neutrosophic covering rough sets also be gived. Lastly, this paper gives a numerical example to apply the interval neutrosophic covering rough sets.

In this paper a new approach to the use of kernel operators derived from fractional order differential equations is proposed. Three different types of kernels are used, power law, exponential decay and Mittag-Leffler kernels. The kernel's fractional order and fractal dimension are the key parameters for these operators. The main objective of this paper is to study the effect of the fractal-fractional derivative order and the order of the nonlinear term, 1

In this paper, several existence results of strongly essential set of the solution set for Ky Fan's section problems and vector Ky Fan's point problems are obtained. Firstly, two kinds of strongly essential sets of Ky Fan's section problems are defined, and some further results on existence of the strongly essential component of solutions set of Ky Fan's section problems are proved, which generalize the conclusion in [ 22 ], and further generalize the conclusions in [ 21 , 28 ]. Secondly, based on the above results, two classes of stronger perturbations of vector-valued inequality functions are proposed respectively, and several existence results of the strongly essential component of set of vector Ky Fan's points are obtained. By comparing several metrics, we give some strong and weak relationships among the various metrics involved in the text. The main results of this paper actually generalize the relevant conclusions in the current literature. Finally, as an application, we obtain an existence result of the strongly essential component of weakly Pareto-Nash equilibrium for multiobjective games.

The motivation of this paper is to study the uniqueness problems of meromorphic functions concerning differential polynomials that share a small function. The results of the paper improve and generalize the recent results due to Fengrong Zhang and Linlin Wu [13]. We also solve an open problem as posed in the last section of [13].

In this paper, we present a new modelling method to create 3D models. First, characteristic cross section curves are generated and approximated by generalized elliptic curves. Then, a vector-valued sixth-order partial differential equation is proposed, and its closed form solution is derived to create PDE surface patches from cross section curves where two adjacent PDE-surface patches are automatically stitched together. With the approach presented in this paper, C2 continuity between adjacent surface patches is well-maintained. Since surface creation of the model is transformed into the generation of cross sectional curves and few undetermined constants are required to describe cross sectional curves accurately, the proposed approach can save manual operations, reduce information storage, and generate 3D models quickly. This research is supported by the PDE-GIR project, which has received funding from the European Union Horizon 2020 Research and Innovation Programme under the Marie SkodowskaCurie grant agreement No 778035. Andres Iglesias also thanks the project TIN2017-89275-R funded by MCIN/AEI/10.13039/501100011033/FEDER “Una manera de hacer Europa”.

This paper studies the solution procedure of a bus transit system with a rectangular service area that had been cited more than two hundred times. We will point out that they applied relations suitable for continuous variables, which are not held for a discrete variable and will result in invalid results. We provide our solution procedure to the same example proposed by the original paper to illustrate that their results are less accurate. Our findings will help researchers understand this kind of bus transit system.

In this paper, the Painlevé integrable property of the (1 + 1)-dimensional generalized Broer–Kaup (gBK) equations is first proven. Then, the Bäcklund transformations for the gBK equations are derived by using the Painlevé truncation. Based on a special case of the derived Bäcklund transformations, the gBK equations are linearized into the heat conduction equation. Inspired by the derived Bäcklund transformations, the gBK equations are reduced into the Burgers equation. Starting from the linear heat conduction equation, two forms of N-soliton solutions and rational solutions with a singularity condition of the gBK equations are constructed. In addition, the rational solutions with two singularity conditions of the gBK equation are obtained by considering the non-uniqueness and generality of a resonance function embedded into the Painlevé test. In order to understand the nonlinear dynamic evolution dominated by the gBK equations, some of the obtained exact solutions, including one-soliton solutions, two-soliton solutions, three-soliton solutions, and two pairs of rational solutions, are shown by three-dimensional images. This paper shows that when the Painlevé test deals with the coupled nonlinear equations, the highest negative power of the coupled variables should be comprehensively considered in the leading term analysis rather than the formal balance between the highest-order derivative term and the highest-order nonlinear term.

The video images captured at long range usually have low contrast floating objects of interest on a sea surface. A comparative experimental study of the statistical characteristics of reflections from floating objects and from the agitated sea surface showed the difference in the correlation and spectral characteristics of these reflections. The functioning of the recently proposed modified matched subspace detector (MMSD) is based on the separation of the observed data spectrum on two subspaces: relatively low and relatively high frequencies. In the literature the MMSD performance has been evaluated in generally and moreover using only a sea model (additive Gaussian background clutter). This paper extends the performance evaluating methodology for low contrast object detection and moreover using only the real sea dataset. This methodology assumes an object of low contrast if the mean and variance of the object and the surrounding background are the same. The paper assumes that the energy spectrum of the object and the sea are different. The paper investigates a scenario in which an artificially created model of a floating object with specified statistical parameters is placed on the surface of a real sea image. The paper compares the efficiency of the classical Matched Subspace Detector (MSD) and MMSD for detecting low-contrast objects on the sea surface. The article analyzes the dependence of the detection probability at a fixed false alarm probability on the difference between the statistical means and variances of a floating object and the surrounding sea.

The Coronavirus herd immunity optimizer (CHIO) is a new human-based optimization algorithm that imitates the herd immunity strategy to eliminate of the COVID-19 disease. In this paper, the coronavirus herd immunity optimizer (CHIO) is modified to tackle a discrete power scheduling problem in a smart home (PSPSH). PSPSH is a combinatorial optimization problem with NP-hard features. It is a highly constrained discrete scheduling problem concerned with assigning the operation time for smart home appliances based on a dynamic pricing scheme(s) and several other constraints. The primary objective when solving PSPSH is to maintain the stability of the power system by reducing the ratio between average and highest power demand (peak-to-average ratio (PAR)) and reducing electricity bill (EB) with considering the comfort level of users (UC). This paper modifies and adapts the CHIO algorithm to deal with such discrete optimization problems, particularly PSPSH. The adaptation and modification include embedding PSPSH problem-specific operators to CHIO operations to meet the discrete search space requirements. PSPSH is modeled as a multi-objective problem considering all objectives, including PAR, EB, and UC. The proposed method is examined using a dataset that contains 36 home appliances and seven consumption scenarios. The main CHIO parameters are tuned to find their best values. These best values are used to evaluate the proposed method by comparing its results with comparative five metaheuristic algorithms. The proposed method shows encouraging results and almost obtains the best results in all consumption scenarios.

This paper proposes a modification of the imperialist competitive algorithm to solve multi-objective optimization problems with hybrid methods (MOHMICA) based on a modification of the imperialist competitive algorithm with hybrid methods (HMICA). The rationale for this is that there is an obvious disadvantage of HMICA in that it can only solve single-objective optimization problems but cannot solve multi-objective optimization problems. In order to adapt to the characteristics of multi-objective optimization problems, this paper improves the establishment of the initial empires and colony allocation mechanism and empire competition in HMICA, and introduces an external archiving strategy. A total of 12 benchmark functions are calculated, including 10 bi-objective and 2 tri-objective benchmarks. Four metrics are used to verify the quality of MOHMICA. Then, a new comprehensive evaluation method is proposed, called “radar map method”, which could comprehensively evaluate the convergence and distribution performance of multi-objective optimization algorithm. It can be seen from the four coordinate axes of the radar maps that this is a symmetrical evaluation method. For this evaluation method, the larger the radar map area is, the better the calculation result of the algorithm. Using this new evaluation method, the algorithm proposed in this paper is compared with seven other high-quality algorithms. The radar map area of MOHMICA is at least 14.06% larger than that of other algorithms. Therefore, it is proven that MOHMICA has advantages as a whole.

In this paper we propose an approximation method for solving second kind Volterra integral equation systems by radial basis functions. It is based on the minimization of a suitable functional in a discrete space generated by compactly supported radial basis functions of Wendland type. We prove two convergence results, and we highlight this because most recent published papers in the literature do not include any. We present some numerical examples in order to show and justify the validity of the proposed method. Our proposed technique gives an acceptable accuracy with small use of the data, resulting also in a low computational cost.

Techniques and methods of linear optimization underwent a significant improvement in the 20th century which led to the development of reliable mixed integer linear programming (MILP) solvers. It would be useful if these solvers could handle mixed integer nonlinear programming (MINLP) problems. Piecewise linear approximation (PLA) is one of most popular methods used to transform nonlinear problems into linear ones. This paper will introduce PLA with brief a background and literature review, followed by describing our contribution before presenting the results of computational experiments and our findings. The goals of this paper are (a) improving PLA models by using nonuniform domain partitioning, and (b) proposing an idea of applying PLA partially on MINLP problems, making them easier to handle. The computational experiments were done using quadratically constrained quadratic programming (QCQP) and MIQCQP and they showed that problems under PLA with nonuniform partition resulted in more accurate solutions and required less time compared to PLA with uniform partition.

Botnet is an urgent problem that will reduce the security and availability of the network. When the bot master launches attacks to certain victims, the infected users are awakened, and attacks start according to the commands from the bot master. Via Botnet, DDoS is an attack whose purpose is to paralyze the victim’s service. In all kinds of DDoS, SYN flood is still a problem that reduces security and availability. To enhance the security of the Internet, IDS is proposed to detect attacks and protect the server. In this paper, the concept of centroid-based classification is used to enhance performance of the framework. An anomaly-based IDS framework which combines K-means and KNN is proposed to detect SYN flood. Dimension reduction is designed to achieve visualization, and weights can adjust the occupancy ratio of each sub-feature. Therefore, this framework is also suitable for use on the modern symmetry or asymmetry architecture of information systems. With the detection by the framework proposed in this paper, the detection rate is 96.8 percent, the accuracy rate is 97.3 percent, and the false alarm rate is 1.37 percent.

Social networking sites (SNSs) are used widely, raising new issues in terms of privacy and disclosure. Although users are often concerned about their privacy, they often publish information on social networking sites willingly. Due to the growing number of users of social networking sites, substantial research has been conducted in recent years. In this paper, we conducted a systematic review of papers that included structural equations models (SEM), or other statistical models with privacy and disclosure constructs. A total of 98 such papers were found and included in the analysis. In this paper, we evaluated the presentation of results of the models containing privacy and disclosure constructs. We carried out an analysis of which background theories are used in such studies and have also found that the studies have not been carried out worldwide. Extending the research to other countries could help with better user awareness of the privacy and self-disclosure of users on SNSs.

This paper presents an alternative system called the axial-flux dual-stator toothless permanent magnet machine (AFDSTPMM) system for flywheel energy storage. This system lowers self-dissipation by producing less core loss than existing structures; a permanent magnet (PM) array is put forward to enhance the air–gap flux density of the symmetrical air gap on both sides. Moreover, its vertical stability is strengthened through the adoption of an axial-flux machine, so expensive active magnetic bearings can be replaced. The symmetry configuration of the AFDSTPMM system is shown in this paper. Then, several parts of the AFDSTPMM system are optimized thoroughly, including stator windings, number of pole pairs and the PM parameters. Further, the performance of the proposed PM array, including back-EMFs, air–gap flux density, average torque, torque ripple and over-load capacity, are compared with the Halbach PM array and spoke PM array, showing the superiority of proposed configuration. Finally, 3D simulations were made to testify for the 2D analyses.

In today's global competition environment with rapid changes in market and technology, it is more and more difficult for enterprises to fully grasp the latest knowledge and learn all the technologies by relying on their own strength. It is particularly important for enterprises to establish a network relationship of a certain intensity with other external entities (upstream and downstream enterprises, peer enterprises, scientific research institutions, government departments, financial institutions, and other organizations) for their technological learning and improvement of technological innovation performance. From different perspectives, the academic circles have confirmed that the strength of network relationship does have an impact on the technological innovation performance of enterprises. This paper will explore the measurement scale of technology learning cost, and from the basic perspective of technology learning cost, deeply explore and analyze how enterprise technology innovation performance is affected by the strength of enterprise network relationship. This paper argues that the strength of network relationship can affect the cost of technology learning and therefore the performance of technology innovation. The main contents of this study include the following. (1) Through the collation and review of the related theories of network relationship strength, technological learning cost and technological innovation performance, and the existing research results, the theoretical model of this study is established, and the theoretical assumptions of this study are put forward. (2) A presurvey is carried out first, and the data collected from the presurvey are used to test the reliability and validity of the scale of this study, and the appropriate measurement scales for the strength of network relationship, technology learning cost, and technology innovation performance are determined. (3) Adopt the method of regression analysis combined with the SME method, to verify this paper builds the theoretical model, and further clarify the network relation intensity, technology acquisition cost, and cost of technological learning all dimensions and performance of technological innovation and network strength, technological learning mechanism between cost, and performance of technological innovation.

(1) Background: In a recent paper discussing Newton’s third law in the framework of special relativity for charged bodies, it was suggested that one can construct a practical relativistic motor provided high enough charge and current densities are available. As on the macroscopic scale charge density is limited by the phenomena of dielectric breakdown, it was suggested to take advantage of the high charge densities which are available on the microscopic scale. (2) Methods: We use standard physical theories such as Maxwell electrodynamics and quantum mechanics, supplemented by tools from vector analysis and numerics. (3) Results: We show that a hydrogen atom either in the ground state or excited state will not produce a relativistic engine effect, but by breaking the symmetry or putting the electron in a wave packet state may produce relativistic motor effect. (4) Conclusions: A highly localized wave packet will produce a strong relativistic motor effect. The preliminary analysis of the current paper suggests new promising directions of research both theoretical and experimental.

Scenario optimization is a broad methodology to perform optimization based on empirical knowledge. One collects previous cases, called “scenarios”, for the set-up in which optimization is being performed, and makes a decision that is optimal for the cases that have been collected. For convex optimization, a solid theory has been developed that provides guarantees of performance, and constraint satisfaction, of the scenario solution. In this paper, we open a new direction of investigation: the risk that a performance is not achieved, or that constraints are violated, is studied jointly with the complexity (as precisely defined in the paper) of the solution. It is shown that the joint probability distribution of risk and complexity is concentrated in such a way that the complexity carries fundamental information to tightly judge the risk. This result is obtained without requiring extra knowledge on the underlying optimization problem than that carried by the scenarios; in particular, no extra knowledge on the distribution by which scenarios are generated is assumed, so that the result is broadly applicable. This deep-seated result unveils a fundamental and general structure of data-driven optimization and suggests practical approaches for risk assessment.

Chinese Semantic Role Labeling (SRL) is the core technology of semantic understanding. In the field of Chinese information processing, where statistical machine learning is still the mainstream, the traditional labeling methods rely heavily on the parsing degree of syntax and semantics of sentences. Therefore, the labeling precision is limited and cannot meet the current needs. This paper adopts the model based on a bidirectional long short-term memory network combined with the Conditional Random Field (Bi-LSTM-CRF). In the feature processing stage, pooling technology is combined with sampling and selecting multifeature vector groups to improve the performance of the sequence labeling model. Lexical, syntactic, and other multilevel linguistic features are integrated into the training to realize in-depth improvement of the original labeling model. Through several groups of experiments, the precision of model annotation in this paper has been significantly improved combined with linguistic-assisted analysis, which proves that it can optimize the annotation performance of the model by integrating relevant linguistic features into the model based on Bi-LSTM-CRF and sampling and extracting multifeature groups; the evaluation of F increases to 82.18 percent.

In the current vehicle-bridge dynamics research studies, displacement impact coefficients are often used to replace the moment and shear force impact coefficients, and the vehicle model is also simplified as a moving-load model without considering the contribution of vehicle stiffness and damping to the system in some concerned research studies, which cannot really reflect the mechanical behavior of the structures under vehicle dynamic loads. This paper presents a vehicle-bridge coupling model for the prediction of dynamic responses and impact coefficient of the long-span curved bending beam bridge. The element stiffness matrix and mass matrix of a curved box girder bridge with 9 freedom degrees are directly deduced based on the principle of virtual work and dynamic finite element theory. The vibration equations of vehicle-bridge coupling are established by introducing vehicle mode with 7 freedom degrees. The Newmark-β method is adopted to solve vibration response of the system under vehicle dynamic loads, and the influences of flatness of bridge surface, vehicle speed, load weight, and primary beam stiffness on the impact coefficient are comprehensively discussed. The results indicate that the impact coefficient presents a nonlinear increment as the flatness of bridge surface changes from good to terrible. The vehicle-bridge coupling system resonates when the vehicle speeds reach 60 km/h and 100 km/h. The moment design value will maximally increase by 2.89%, and the shear force design value will maximally decrease by 34.9% when replacing moment and shear force impact coefficients with the displacement impact coefficient for the section internal force design. The load weight has a little influence on the impact coefficient; the displacement and moment impact coefficients are decreased with an increase in primary beam stiffness, while the shear force impact coefficient is increased with an increase in primary beam stiffness. The theoretical results presented in this paper agree well with the ANSYS results.

The K-Nearest Neighbor (KNN) algorithm is a classical machine learning algorithm. Most KNN algorithms are based on a single metric and do not further distinguish between repeated values in the range of K values, which can lead to a reduced classification effect and thus affect the accuracy of fault diagnosis. In this paper, a hybrid metric-based KNN algorithm is proposed to calculate a composite metric containing distance and direction information between test samples, which improves the discriminability of the samples. In the experiments, the hybrid metric KNN (HM-KNN) algorithm proposed in this paper is compared and validated with a variety of KNN algorithms based on a single distance metric on six data sets, and an HM-KNN application method is given for the forward gait stability control of a bipedal robot, where the abnormal motion is considered as a fault, and the distribution of zero moment points when the abnormal motion is generated is compared. The experimental results show that the algorithm has good data differentiation and generalization ability for different data sets, and it is feasible to apply it to the walking stability control of bipedal robots based on deep neural network control.

Wildfires are complex natural events that cause significant environmental and property damage, as well as human losses, every year throughout the world. In order to aid in their management and mitigate their impact, efforts have been directed towards developing decision support systems that can predict wildfire propagation. Most of the available tools for wildfire spread prediction are based on the Rothermel model that, apart from being relatively complex and computing demanding, depends on several input parameters concerning the local fuels, wind or topography, which are difficult to obtain with a minimum resolution and degree of accuracy. These factors are leading causes for the deviations between the predicted fire propagation and the real fire propagation. In this sense, this paper conducts a literature review on optimization methodologies for wildfire spread prediction based on the use of evolutionary algorithms for input parameter set calibration. In the present literature review, it was observed that the current literature on wildfire spread prediction calibration is mostly focused on methodologies based on genetic algorithms (GAs). Inline with this trend, this paper presents an application of genetic algorithms for the calibration of a set of the Rothermel model’s input parameters, namely: surface-area-to-volume ratio, fuel bed depth, fuel moisture, and midflame wind speed. The GA was validated on 37 real datasets obtained through experimental prescribed fires in controlled conditions.

This paper investigates the geometry of canonically polarized surfaces defined over a field of positive characteristic which have a nontrivial global vector field, and the implications that the existence of such surfaces has in the moduli problem of canonically polarized surfaces. In particular, an explicit integer valued function f(x) is obtained with the following properties. If X is a canonically polarized surface with canonical singularities defined over an algebraically closed field of characteristic p>0 such that p>f(K_X^2) and X has a nontrivial global vector field, then X is unirational and the algebraic fundamental group is trivial. As a consequence of this result, large classes of canonically polarized surfaces are identified whose moduli stack is Deligne-Mumford, a property that does not hold in general in positive characteristic. This paper is mathematically identical to the previous version. The reason that the paper is replaced is in order to point out that this paper is a generalization to the case of singular surfaces with canonical singularities of the paper "Vector fields and moduli of canonically polarized surfaces in positive characteristic" with reference arXiv:1710.03076 which treated only the case of smooth surfaces. The results of this paper supercede the results of the aforementioned paper making it obsolete., This paper is a generalization to the case of singular surfaces with canonical singularities of the paper "Vector fields and moduli of canonically polarized surfaces in positive characteristic" with reference arXiv:1710.03076 which treated only the case of smooth surfaces. The results of this paper supercede the results of the aforementioned paper making it obsolete. 46 pages

This paper presents an analysis of a hitherto barely known conceptual problem in the foundations of arithmetic. An unknown type of number, so-called complex numbers, first emerged in 18th century France and became connected with the claim of non-commutativity of their multiplication. These first French practitioners are here analysed, along with examination of the impact of the introduction of the metric decimal system. International dissemination of the notion is then analysed, in particular in the case of Brazil. The paper concludes by looking at the mathematical foundations of multiplying (physical) quantities. (c) 2020 Elsevier Inc. All rights reserved.

The problem of the dual synchronization of two different fractional-order chaotic systems with uncertain parameters is studied. This paper introduces a synchronization method in accordance with Lyapunov stability theory, and the adaptive controllers and adaptive laws are designed to realize the dual synchronization of fractional order chaotic systems. Finally, two numerical examples of unknown different fractional-order chaotic systems are also given to prove the accuracy of the theory in the paper, and the effectiveness and performance of the proposed adaptive dual synchronization strategy are verified by simulation.

This paper deals with the measurement of the compatibility in a local AHP-Group Decision Making context. Compatibility between two individuals or decision makers is understood as the property that reflects the proximity between their positions or preferences, usually measured by a distance function. An acceptable level of incompatibility between the individual and the group positions will favour the acceptance of the collective position by the individuals. To facilitate the compatibility measurement, the paper utilises four indicators based on log quadratic distances between matrices or vectors which can be employed in accordance with the information that is available from the individual decision makers and from the group. The indicators make it possible to measure compatibility in decision problems, regardless of how the collective position and the priorities are obtained. The paper also presents a theoretical framework and a general, semi-automatic procedure for reducing the incompatibility measured by the four indicators. Using relative variations, the procedure identifies and slightly modifies the judgement of the collective matrix that further improves the indicator. This process is undertaken without modifying the initial information provided by the individuals. A numerical example illustrates the application of the theoretical framework and the procedure.

Accounting dishonesty is still a problem that is far from being solved, both in theory and in practice. In the existing research on accounting dishonesty, scholars mostly analyze the causes and countermeasures of the lack of accounting integrity from the aspects of external accounting system and internal corporate governance and fail to establish a theoretical system and analytical framework for accounting integrity analysis. This limitation inevitably makes the analysis stay on the surface of things with lack of a deep grasp of its essential problems. Through the study of the relevant literature, the grey correlation model can sort the proportion of the factors affecting accounting integrity and get the primary and secondary factors affecting accounting integrity, so as to put forward more targeted countermeasures to solve the problem of accounting integrity. Based on this, this paper uses the method of combining theory with practice to study the problem of accounting integrity. Combined with the current situation of accounting integrity, this paper uses the grey correlation model to sort the proportion of the factors affecting accounting integrity, analyzes its specific reasons, and finally puts forward the measures to solve the dilemma of accounting integrity according to the analysis results. In view of the problems of enterprise accounting integrity, it is necessary to strengthen the publicity and education of accounting practitioners’ integrity system. Accelerate the construction of the legal system of accounting integrity and promote the legislation of accounting integrity. A full-time organization for accounting integrity evaluation should be established to measure the accounting integrity of enterprises by using reasonable evaluation means and methods, clear and standardized evaluation contents, and integrity level standards.

In this paper we reconsider a known technique for constructing strong MIP formulations for disjunctive constraints of the form $$x \in \bigcup _{i=1}^m P_i$$ x ∈ ⋃ i = 1 m P i , where the $$P_i$$ P i are polytopes. The formulation is based on the Cayley Embedding of the union of polytopes, namely, $$Q := \mathrm {conv}(\bigcup _{i=1}^m P_i\times \{\epsilon ^i\})$$ Q : = conv ( ⋃ i = 1 m P i × { ϵ i } ) , where $$\epsilon ^i$$ ϵ i is the ith unit vector in $${\mathbb {R}}^m$$ R m . Our main contribution is a full characterization of the facets of Q, provided it has a certain network representation. In the second half of the paper, we work-out a number of applications from the literature, e.g., special ordered sets of type 2, logical constraints, the cardinality indicating polytope, union of simplicies, etc., along with a more complex recent example. Furthermore, we describe a new formulation for piecewise linear functions defined on a grid triangulation of a rectangular region $$D \subset {\mathbb {R}}^d$$ D ⊂ R d using a logarithmic number of auxilirary variables in the number of gridpoints in D for any fixed d. The series of applications demonstrates the richness of the class of disjunctive constraints for which our method can be applied.

In his seminal 1934 paper on Brownian motion and the theory of gases Kolmogorov introduced a second order evolution equation which displays some challenging features. In the opening of his 1967 hypoellipticity paper Hörmander discussed a general class of degenerate Ornstein–Uhlenbeck operators that includes Kolmogorov’s as a special case. In this note we combine semigroup theory with a nonlocal calculus for these hypoelliptic operators to establish new inequalities of Hardy–Littlewood–Sobolev type in the situation when the drift matrix has nonnegative trace. Our work has been influenced by ideas of E. Stein and Varopoulos in the framework of symmetric semigroups. One of our objectives is to show that such ideas can be pushed to successfully handle the present degenerate non-symmetric setting.

In this paper we study the existence of a mild solution of a periodic boundary value problem for fractional quasilinear differential equations in a Hilbert spaces. We assume that a linear part in equations is a self-adjoint positive operator with dense domain in Hilbert space and a nonlinear part is a map obeying Carathéodory type conditions. We find the mild solution of this problem in the form of a series in a Hilbert space. In the space of continuous functions, we construct the corresponding resolving operator, and for it, by using Schauder theorem, we prove the existence of a fixed point. At the end of the paper, we give an example for a boundary value problem for a diffusion type equation.

The fruit fly Drosophila melanogaster is a classic research object in genetics and systems biology. In the genetic analysis of flies, a routine task is to determine the offspring size and gender ratio in their populations. Currently, these estimates are made manually, which is a very time-consuming process. The counting and gender determination of flies can be automated by using image analysis with deep learning neural networks on mobile devices. We proposed an algorithm based on the YOLOv4-tiny network to identify Drosophila flies and determine their gender based on the protocol of taking pictures of insects on a white sheet of paper with a cell phone camera. Three strategies with different types of augmentation were used to train the network. The best performance (F1 = 0.838) was achieved using synthetic images with mosaic generation. Females gender determination is worse than that one of males. Among the factors that most strongly influencing the accuracy of fly gender recognition, the fly’s position on the paper was the most important. Increased light intensity and higher quality of the device cameras have a positive effect on the recognition accuracy. We implement our method in the FlyCounter Android app for mobile devices, which performs all the image processing steps using the device processors only. The time that the YOLOv4-tiny algorithm takes to process one image is less than 4 s.

With the popularization of higher education, the scale of urban higher education continues to expand, and the contradiction between the supply and demand of educational resources becomes increasingly prominent, which restricts the steady development of urban higher education. Based on the rough set theory, this paper constructs a rough set of big data of urban higher education resource carrying capacity from the three levels of higher education core resources, urban economic resources and urban basic resources, and evaluates the entropy weight of the city where the university is located. According to the theoretical knowledge of higher education resource carrying capacity, the system deconstructs and expounds the balance mechanism of higher education resource carrying capacity, which provides solid theoretical support for the development of the paper. The research shows that the agglomeration development of higher education resources can improve the carrying capacity of urban higher education resources. The second section performed well on the whole, and the index distribution was more uniform. The third interval index structure distribution is complex and uneven, and the overall performance is general. The fourth section belongs to the poor section of educational carrying capacity with a low overall index. It can be seen that the carrying capacity of higher education resources varies significantly, which provides a scientific basis for improving the carrying capacity of higher education resources and theoretical and policy basis for realizing rational allocation and sustainable carrying capacity of higher education resources.

This paper is supposed to form a keystone towards a new and alternative approach to Fourier analysis over LCA (locally compact Abelian) groups G. In an earlier paper the author has already shown that one can introduce convolution and the Fourier–Stieltjes transform on (M(G),∥·∥M), the space of bounded measures (viewed as a space of linear functionals) in an elementary fashion over Rd. Bounded uniform partitions of unity (BUPUs) are easily constructed in the Euclidean setting (by dilation). Moving on to general LCA groups, it becomes an interesting challenge to find ways to construct arbitrary fine BUPUs, ideally without the use of structure theory, the existence of a Haar measure and even Lebesgue integration. This article provides such a construction and demonstrates how it can be used in order to show that any so-called homogeneous Banach space(B,∥·∥B) on G, such as (Lp(G),∥·∥p), for 1≤p<∞, or the Fourier–Stieltjes algebra FM(G), and in particular any Segal algebra is a Banach convolution module over (M(G),∥·∥M) in a natural way. Via the Haar measure we can then identify L1(G),∥·∥1 with the closure (of the embedded version) of Cc(G), the space of continuous functions with compact support, in (M(G),∥·∥M), and show that these homogeneous Banach spaces are essentialL1(G)-modules. Thus, in particular, the approximate units act properly as one might expect and converge strongly to the identity operator. The approach is in the spirit of Hans Reiter, avoiding the use of structure theory for LCA groups and the usual techniques of vector-valued integration via duality. The ultimate (still distant) goal of this approach is to provide a new and elementary approach towards the (extended) Fourier transform in the setting of the so-called Banach–Gelfand triple(S0,L2,S0′)(G), based on the Segal algebra S0(G). This direction will be pursued in subsequent papers.

Based on information asymmetry theory, principal-agent theory, and risk management theory, this paper analyzes the mechanism of the impact of big data on financial decision-making, analyzing four dimensions: how big data enhances the information base for forecasting, how big data improves the relevance of decision-making, how big data builds new competitive advantages, and how big data promotes dynamic decision-making. Secondly, through the analysis of specific implementation cases of enterprise big data in financial decision-making, we focus on the real problems faced in management and the effect of solving problems through big data platform. The enterprise realizing the integration of business and finance not only can better lead business expansion, but also can improve the management level within the enterprise, which is conducive to the improvement of core competitiveness. The integration of industry and finance is essentially achieved through the application of various financial management modules to the business operations of enterprises, including budget management, capital management, fixed asset management, and financial accounting. If we want to implement the whole process of financial integration, it is impossible to achieve this manually, and we must first build a powerful information system as a guarantee. Under the guidance of theories of information asymmetry, stakeholders, and management information systems, Internet finance enterprises should build their own integrated business finance system based on the demand for business finance integration in the Internet finance industry, to enhance the matching of business finance data of Internet finance enterprises, improve the efficiency of enterprise management, and realize business finance integration. Finally, through the research of this paper, we hope to provide reference for other similar enterprises to apply big data for financial decision-making. Through the application of big data, higher economic benefits are achieved in procurement management, production control, capital budget, and investment decision compared with the previous ones. It is concluded that in the era of big data, massive data can be used to serve enterprise decision-making in depth, which can break the business and financial barriers, improve the efficiency and quality of decision-making, optimize the organizational structure and personnel, and enhance the prediction and early warning capability. The application of big data tools has become the key to assisting financial decision-making and enhancing enterprise value.

The relationship between financial system and economic development is not a simple linear relationship. In some cases, the development of finance may not improve the economic development level. This paper studies the influence of the financial system on the high-quality economic development, constructs the comprehensive index of the financial system by the factor analysis method, and calculates the green total factor productivity as the index of high-quality economic development by the CRS multiplier model. Empirically, this paper takes the panel data of 30 provinces, municipalities, and autonomous regions in China from 2005 to 2018 as samples, constructs the panel threshold model, and applies the financial system, economic development level, infrastructure, and industrial structure as threshold variables to study the nonlinear relationship between the financial system and high-quality economic development. The results demonstrate that the impact of the financial system on the high-quality economy presents an inverted U-shaped relationship when the financial system and industrial structure are the threshold variables, indicating that there is an optimal interval, that is, when the financial system threshold is between 0.1355 and 0.1377 and the industrial structure threshold is between 0.1364 and 0.1408, the financial system plays a greater role in the allocation of funds and has the most obvious positive impact on high-quality economic development. Meanwhile, the impact of the financial system on the high-quality shows a marginal decreasing trend when the economic development level and infrastructure are the threshold variables; when the economic development threshold is less than 0.1409 and the basic setting threshold is less than 0.1167, the financial system has the greatest effect on promoting high-quality economic development. Based on the research results, targeted policy suggestions are put forward.

The management control system in an industry is managerial, directional, hindrance, and cohesive action in order to cohere and regulate various branches and sub-branches. In fact, it is a system that supports the real state of matters in the right way. This method is intended at assuring that the purposes and activities carried out have the desired outcomes and eventually lead to the objects and purposes of the company. In this matter, the financial and non-financial management control system is essential both when it comes to strategy community; Consequently, in this paper, the management control system is classified into financial and non-financial categories because such analysis gives a chance to get a broad assessment of a management control system relationship in organizations. In this paper, we evaluate the relationship between business strategy and management control system and their influences on financial performance measurement of a manufacturer (a case study of Maral Co.) with the use of Merchant’s theory. Furthermore, In this case, a decision-making strategy centered on the FMEA is used to identify and prioritize risk factors financial of the control system in companies. Nevertheless, because this strategy has some significant limitations, this research has presented a decision-making approach depending on Z-number theory. For tackle, some of the RPN score’s drawbacks, the suggested decision-making methodology combines the Z-SWARA and Z-WASPAS techniques with the FMEA method. The findings reveal that in the non-financial management control system element, customer satisfaction, and in the financial component, cost standards are at the largest level of weight. Furthermore, the strategic planning factor with a rate of 2.95 and the deviation analysis factor with a rate of 2.87 is at the lowest level, respectively. In sum, market or industry changes are the primary cause of risk in businesses, according to FMEA methodology and the opinions of three professionals.

Based on the Szirtes’ modern dimensional analysis (MDA), the authors apply the theory to a real structure in order to validate by experimental measurements its applicability. After a presentation of the basic elements of the model law (ML), deduced for two relevant cases, the authors conceived the set of prototypes and models, based on the case of an actual construction pillar, physically performed at scales of 1:1, 1:2, and 1:4. The combination of these structural elements, made at different scales, resulted in three sets of prototypes and models. In this paper, taking into consideration the ML for two relevant cases, the following are presented: the original test stand of these structural elements; block diagram of the original electronic heating and control system; the basic considerations regarding the particularity of this heating system from the point of view of heat transfer; measurement data, obtained for both nonthermally protected elements and for those protected with layers of intumescent paints. In the last part of the paper, the values obtained by rigorous direct measurements with those offered by the ML on the elements considered as prototypes and models are compared. Almost identical values were obtained from the direct measurements with those provided by the ML, thus resulting in the validation of these laws. The same thermal regimes were applied to all these structural elements, with registration of every parameter related to these thermal regimes. Depending on the role of a structural element within a certain set (prototype-model), some of the measurement data were considered as data acquired directly through measurements, and others served as reference elements for those for which we had to obtain through the model law. In the last part of the paper, the sizes obtained by rigorous direct measurements are compared with those offered by the model law on the elements considered as prototypes and models. Identical practical values of the quantities were obtained from the direct measurements with those provided by the model law, thus resulting in the validation of these laws.