Search

Cd2+ cation doped CsPbCl3 single crystals were synthesized, and their luminescent properties were investigated under excitation with synchrotron radiation quanta with energy greater than Eg and at a sample temperature of 12 K. Pure single crystals exhibit a narrow band of exciton emission at 416.7 nm. Doping the single crystals leads to a high-energy shift of the excitonic luminescence, the appearance of new luminescent bands, the broadening of the luminescent bands, an increase in the decay time constants, and a significant enhancement of the luminescence intensity. The observed changes in luminescent parameters upon doping are discussed in terms of the crystal structure ordering, a decrease in the number of defects responsible for capturing charge carriers at the stage of electronic excitation thermalization, and a decrease in defects that quench excitonic luminescence. Doped single crystals with decay times of the order of 0.4 ns and intensities that significantly exceed the intensity of pure single crystals can be promising scintillation materials for positron emission tomography in the time-of-flight mode. [ABSTRACT FROM AUTHOR]

Chiral hybrid metal halides hold great potential as circularly polarized luminescence light sources. Herein, we have obtained two enantiomeric pairs of one‐dimensional hybrid chiral manganese(II) chloride single crystals, R/S‐(3‐methyl piperidine)MnCl3 (R/S‐1) and R/S‐(3‐hydroxy piperidine)MnCl3 (R/S‐2), crystallizing in the non‐centrosymmetric space group P212121. In comparison to R/S‐1, R/S‐2 single crystals not only show red emission with near‐unity photoluminescence quantum yield (PLQY) and high resistance to thermal quenching but also exhibit circularly polarized luminescence with an asymmetry factor (glum) of 2.5×10−3, which can be attributed to the enhanced crystal rigidity resulting from the hydrogen bonding networks between R/S‐(3‐hydroxy piperidine) cations and [MnCl6]4− chains. The circularly polarized luminescence activities originate from the asymmetric [MnCl6]4− luminophores induced by N−H⋅⋅⋅Cl hydrogen bonding with R/S‐(3‐hydroxy piperidine). Moreover, these samples demonstrate great application potential in circularly polarized light‐emitting diodes and X‐ray scintillators. This work shows a highly efficient photoluminescent Mn‐based halide and offers a strategy for designing multifunctional chiral metal halides. [ABSTRACT FROM AUTHOR]

Chiral hybrid metal halides hold great potential as circularly polarized luminescence light sources. Herein, we have obtained two enantiomeric pairs of one‐dimensional hybrid chiral manganese(II) chloride single crystals, R/S‐(3‐methyl piperidine)MnCl3 (R/S‐1) and R/S‐(3‐hydroxy piperidine)MnCl3 (R/S‐2), crystallizing in the non‐centrosymmetric space group P212121. In comparison to R/S‐1, R/S‐2 single crystals not only show red emission with near‐unity photoluminescence quantum yield (PLQY) and high resistance to thermal quenching but also exhibit circularly polarized luminescence with an asymmetry factor (glum) of 2.5×10−3, which can be attributed to the enhanced crystal rigidity resulting from the hydrogen bonding networks between R/S‐(3‐hydroxy piperidine) cations and [MnCl6]4− chains. The circularly polarized luminescence activities originate from the asymmetric [MnCl6]4− luminophores induced by N−H⋅⋅⋅Cl hydrogen bonding with R/S‐(3‐hydroxy piperidine). Moreover, these samples demonstrate great application potential in circularly polarized light‐emitting diodes and X‐ray scintillators. This work shows a highly efficient photoluminescent Mn‐based halide and offers a strategy for designing multifunctional chiral metal halides. [ABSTRACT FROM AUTHOR]

Scintillators with high light yield, spatial resolution, and detection sensitivity are desirable for X‐ray imaging. Howerer, it remains challenging to improve the light yield and radiation detection capability of alkali metal rare‐earth fluoride (ALnF4). Herein, a type of Cu2+ ion heterovalent co‐doped LiLuF4:Tb,Cu microcrystalline scintillation material with high light yield, persistent, and thermostimulated luminescence is obtained by defect engineering. The heterovalent codoping strategy not only increases the radioluminescence (RL) intensity, but also introduces more carrier traps in the material to enhance the long‐afterglow and thermoluminescence intensity of LiLuF4:Tb microcrystals. After doping of 3 mol% Cu2+ ions, the RL efficiency is increased by 88.61%, and the X‐ray detection limit of LiLuF4:Tb,Cu reaches 2.7928 nGy·s‒1. This detectivity is considerably lower than the medical imaging requirements (5.5 µGy·s‒1). Furthermore, a large‐area flexible scintillation film of dimensions 30 × 30 cm2 is prepared to achieve high spatial resolution X‐ray imaging of 22 LP mm−1@MTF(modulation transfer function) = 0.2. Besides, this flexible film enables X‐ray imaging of curved objects and stores optical information for >48 h. This work provides a paradigm for improving the RL intensity and X‐ray detection sensitivity of alkali rare‐earth fluorides by crystal defect engineering, and enriches X‐ray high resolution extended imaging applications. [ABSTRACT FROM AUTHOR]

Upconversion nanoparticles (UCNPs), particularly those that are highly doped, possess outstanding properties and have demonstrated tremendous application potential. However, novel fine-tuning strategies are urgently required to enhance the upconversion luminescence (UCL) performance of UCNPs. In this study, a series of core–multishell UCNPs highly doped with Ho3+ and Yb3+ ions were synthesized via the oleate route. The X-ray diffraction (XRD), transmission electron microscopy (TEM), and UCL spectra and decay times, and pump power dependency of the synthesized UCNPs were used to examine their morphology, size, and the UCL properties. Ce3+ ions were introduced to enhance Ho3+-based red UCL, and their doping strategy was also optimized based on summarized UCL trends and detailed UCL mechanism analysis. NaHoF 4 :Gd3+@NaGdF 4 :Yb3+,Ce3+@NaGdF 4 :Yb3+ UCNPs that had 10 mol% Ce3+ dopants in their middle shells exhibited better UCL properties than the larger traditional NaGdF 4 :Yb3+,Ce3+,Ho3+ UCNPs, probably because of the combined influence of the energy interactions between the Ce3+ ions and surface groups, sensitizing energy enhancement by active shells, and the positive cooperation between the Ce3+ ions and highly-doped core–shell structures. In this study, the phenomenon of UCL decrease resulting from Ce3+ ion doping was explored. Using unique core–multishell structures with highly-doped activators and sensitizers placed within and outside the structures, respectively, the UCL decrease due to Ce3+ ion doping was attributed to a competition for photons. Doping the UCNPs with Ce3+ ions near the UCNP surfaces favors Ho3+-based red UCL. Our study findings can deepen the understanding of the Ho3+-based UCL mechanisms and increase the potential uses of NaHoF 4 materials in photo-induced therapy. When Ce3+ ions are doped near the nanoparticle surface, they might have energy interactions with surface groups to relieve phonon energy shortage and thus enhance the efficiency of cross-relaxation between Ho3+ and Ce3+ ions. [Display omitted] [ABSTRACT FROM AUTHOR]

Scintillators, owing to their exceptional ability to convert high-energy ionizing radiation into visible light, are the core component of X-ray radiography. However, conventional single-crystal scintillators are inadequate to satisfy the modern social and scientific demands. So, the development of novel scintillator materials is imminent. Herein, a series of Na 5 Lu 9- x Gd x F 32 :Ce3+ glass-ceramics (GCs) scintillators were elaborated by an exercisable and low-cost method. Benefiting from the proper introduction of Al powder and Gd3+, as well as the crystallization of Na 5 Lu 9- x Gd x F 32 nanocrystal (NCs) after heat treatment, luminescence excited by ultraviolet and X-ray of the sample is enhanced significantly. The integrated X-ray excited luminescence intensity of the representative sample can reach up to 128% of that of Bi 4 Ge 3 O 12. More importantly, the sample has excellent irradiation stability that is almost undamaged even exposed to high-energy X-ray radiation. Finally, satisfactory X-ray imaging based on the resultant sample was realized. The spatial resolution is as high as 14 lp mm−1, which exceeds that of many novel perovskite scintillators. Thus, this investigation promotes the development of low-cost, stable and high-performing Ce3+-activated GCs scintillators. • Three effective ways were designed to improve the scintillating property of the sample. • The integrated X-ray excited luminescence reaches 128% of that of Bi 4 Ge 3 O 12. • The sample is undamaged even excited by high-power (12 W) X-ray, infering outstanding irradiation stability. • Satisfactory X-ray imaging based on the sample was achieved. • The spatial resolution reaches 14 lp mm−1, exceeding that of many perovskite scintillators. [ABSTRACT FROM AUTHOR]

The high durability under harsh environment including high temperature, high humidity, and high radiation is required for scintillators used for decommissioning of nuclear facilities and radiation monitoring in nuclear fusion reactors. α‐SiAlON ceramics are highly potential for such scintillators because of their thermal and mechanical durability and luminescence corresponding to doped rare‐earth ion. In this study, scintillation properties of transparent Lu‐α‐SiAlON:Ce3+ ceramics were investigated for the first time. Lu‐α‐SiAlON:Ce3+ showed the scintillation responses to α‐rays and X‐rays. The α‐rays‐induced scintillation decay curve consists of two components whose decay time are 48 and 652 ns. The faster decay component most presumably results from 4f‐5d transition of Ce3+, whereas the origin of the slower one is unclear but may be defects in α‐SiAlON. The light yield of the Lu‐α‐SiAlON:Ce3+ ceramics was 1300 photons 5.5 MeV−1. [ABSTRACT FROM AUTHOR]

Er3+ doped high density germanate glasses with compositions of 50GeO 2 -10BaO–10Al 2 O 3 -15Lu 2 O 3 -(15-x) La 2 O 3 -xEr 2 O 3 (x = 0, 0.1, 0.5, 1.0, 1.5, and 2.0, in mol%) have been prepared by the melt-quenching method. The optical and physical properties of the samples were characterized by differential scanning calorimetry (DSC), density, transmittance spectra, photoluminescence (PL) spectra, and X-ray excited luminescence (XEL) spectra. The densities were in the range from 5.90 to 6.07 g/cm3. The strong green emissions around 552 nm of Er3+ were observed upon the excitations of 378 nm light and the X-ray, and the lifetimes of 552 nm emission were in the range of 20.88–96.47 μs. The results show that Er3+ doped high density germanate glasses could be used as potential scintillators for X-ray CT. [ABSTRACT FROM AUTHOR]

Radiation detection plays an important role in diverse applications, including medical imaging, security, and display technologies. Scintillators, materials that emit light upon exposure to radiation, have garnered significant attention due to their exceptional sensitivity. Previous research explored polymer dots (P-dots) doped with iridium complexes as nano-sized scintillators for radiation detection, but these were constrained to emitting specific colors like red, green, and blue, limiting their utility. Recently, there has been a breakthrough in the development of white light emitters stimulated by UV–visible light. These emitters exhibit a broad spectral range in the visible wavelength, enhancing contrast and simplifying detection by visible-light sensors. Consequently, the quest for white color scintillators in radiation detection has emerged as a promising avenue for enhancing scintillation efficiency. In this study, we present a novel approach by applying P-dots doped with two iridium complexes to create white light-emitting nano-sized scintillators. These scintillators offer a wider spectral coverage within the visible-light wavelength range. Under UV light (365 nm) excitation, our synthesized P-dots exhibited remarkable white light emission. Moreover, when excited by electron beam irradiation, we observed the clear emission close to white emission which is valuable for improving the detection of radiation. [ABSTRACT FROM AUTHOR]

With the increasing demands of X‐ray detection and medical diagnosis, organic scintillators with intense and tunable X‐ray excited emission have been becoming important. To guarantee the X‐ray absorption, heavy atoms were widely added in reported organic scintillators, which led to emission quenching. In this work, we propose a new strategy to realize organic scintillators through the host‐guest doping strategy. Then the X‐ray absorption centers (host) and emission centers (guest) are separated. Under X‐ray excitation, these materials displayed intense and readily tunable emissions ranging from green (520 nm) to near infrared (NIR) regions (682 nm). Besides, the relationship between the X‐ray absorption and spatial arrangement of the heavy atoms in the host matrix was also revealed. The potential application of these wide‐range color tunable organic host‐guest scintillators in X‐ray imaging were demonstrated. This work provides a new feasible strategy for constructing high‐performance organic scintillators with tunable luminescence properties. [ABSTRACT FROM AUTHOR]

Due to its short radiation length, moderate light output (8000‐9000 photons/MeV), high density (7.13 g cm−3), and non‐hygroscopicity, etc., Bi4Ge3O12 (BGO) material has been widely utilized as an advanced scintillator for irradiation detection. However, pure BGO cannot meet the requirements for future physics experiments and state‐of‐art industrial facilities coupled with a silicon photomultiplier (SiPM) due to its slow response time, poor radiation resistance, and excessive light output. Herein, a Ce‐doping strategy is reported for efficiently improving the overall performance (e.g., irradiation resistance, decay time, radioluminescence, and light output) of BGO that can be expectedly applied in future high energy physics detection. Ce‐doped BGO (BGO:Ce) displays higher radiation resistance ability under 10 h UV irradiation (97% of original) and a faster fluorescence lifetime (269 ns), superior to pure BGO. Furthermore, BGO:Ce shows ≈30% luminescence intensity of pure BGO, well eliminating the oversaturation of SiPM coupled with scintillation detectors. Theoretical calculations imply that an intense competition between electron or hole traps and Ce ions (Ce3+, Ce4+) can effectively reduce the concentration of color centers, thus enhancing irradiation resistance ability. [ABSTRACT FROM AUTHOR]

With the increasing demands of X‐ray detection and medical diagnosis, organic scintillators with intense and tunable X‐ray excited emission have been becoming important. To guarantee the X‐ray absorption, heavy atoms were widely added in reported organic scintillators, which led to emission quenching. In this work, we propose a new strategy to realize organic scintillators through the host‐guest doping strategy. Then the X‐ray absorption centers (host) and emission centers (guest) are separated. Under X‐ray excitation, these materials displayed intense and readily tunable emissions ranging from green (520 nm) to near infrared (NIR) regions (682 nm). Besides, the relationship between the X‐ray absorption and spatial arrangement of the heavy atoms in the host matrix was also revealed. The potential application of these wide‐range color tunable organic host‐guest scintillators in X‐ray imaging were demonstrated. This work provides a new feasible strategy for constructing high‐performance organic scintillators with tunable luminescence properties. [ABSTRACT FROM AUTHOR]

A single crystal of Zn2Te3O8 (ZTO) was grown using the conventional Czochralski technique. TGA analysis showed that the melting point of ZTO is 681 °C, while it exhibits a structural phase transition at 621 °C. The powder X-ray diffraction analysis of ZTO confirmed that it possesses a single crystalline monoclinic structure with the C2/c space group. An indirect band gap of 3.75 eV was estimated for the ZTO crystal based on its absorption spectrum. The X-ray-induced luminescence of the grown crystal comprised a broad band peaking at 565 nm, which can be tentatively assigned to the self-trapped exciton emission from the (Te3O8)4− molecular complexes. The photoluminescence measured under 280 nm excitation showed a broad band luminescence peaking at about 600 nm, and its intensity was significantly enhanced upon cooling the crystal from 300 K to 10 K. The photoluminescence decay time under 280 nm excitation was shown to have two exponential components in the range from 10 K to 175 K, which became a single exponential upon further heating the crystal. Low scintillation light was observed at room temperature both under α- and β-particle excitations from 241Am and 90Sr sources, respectively. The scintillation light yield measured under β-particle excitation from the 90Sr source was enhanced by about five orders of magnitude at 10 K in comparison to that at 300 K. The scintillation light yield measured at 10 K under the same experimental conditions for ZTO in comparison with the well-known cryogenic scintillator Li2MoO4 (LMO) was shown to have four times higher scintillation light. A single-crystal ingot of ZTO was obtained for the first time; however, it had several cracks due to its phase transition. Notably, scintillation at low temperatures for a Te-based crystal was observed for the first time. These preliminary findings are very promising and show that ZTO will be a good candidate for cryogenic phonon scintillation detectors for the 0νββ decay search of 130Te. [ABSTRACT FROM AUTHOR]

There is a growing demand for materials for detecting ionizing radiation, which has led to the expansion of research and development of new scintillators. Typically, scintillators are synthesized by crystallizing materials at high temperatures, and their photoluminescence (PL) is difficult to tune in the visible spectral range. Therefore, composite materials based on CsPbBr3 perovskite nanocrystals (PNCs), which have a high average atomic number and a long charge-carrier diffusion length, are of particular interest and may be used for detecting ionizing radiation. Unlike bulk scintillators, PNCs are synthesized in solution at relatively low temperatures, with the PL tunable throughout the visible spectrum. The main problem limiting the widespread use of PNCs is their low stability upon contact with the environment. This study presents the results of experiments on the encapsulation of PNCs in a polystyrene matrix, the evaluation of the changes in the luminescence quantum yield (QY) over time, and the development of a technique for studying the amplitude characteristics of signals recorded during the interaction of α-particles with composite materials based on CsPbBr3 PNCs and polystyrene. The study has shown that composite samples based on PNCs and polystyrene retain a stable luminescence QY for two weeks. Using a 241Am source with a characteristic α-particle energy of about 4.6 MeV and γ-ray energy of 60 keV, the light output values were calculated for the samples studied. The maximum light output was 20% of that of the standard "fast" plastic scintillator (POPOP) at a volume fraction of PNCs in the composite of less than 1%, which indicates the prospect of PNCs as a basis for composite scintillators and their further use in X-ray diagnosis. [ABSTRACT FROM AUTHOR]

Copper (I) based halide scintillators have received high attention due to their high light yield. At the same time, researchers are increasingly interested in exploring organic‐inorganic hybrid copper(I) based halides, due to the diversity and tunability of structures. Here, we describe high‐efficiency photoluminescence and X‐ray excited luminescence in (DFPD)3Cu2I5 (1) (DFPD=4,4‐difluoro‐bipiperidinium). 1 is comprised of a unique [Cu2I5]3− cluster, which have typical structure allowing high‐transition‐probability self‐trapped exciton emission (one Cu+ ion adopts the tetrahedral coordination geometry, the other trigonal planar coordination geometry, the Cu−Cu distance (2.574 Å) is short). Accordingly, 1 shows efficient yellow‐green photoluminescence with the maximum at 527 nm, a full‐width at half‐maximum of 99.2 nm, a large Stokes shift of 214 nm (1.6 eV) and a quantum yield of 77.15 %. Polycrystalline 1 can also convert high‐energy X‐ray photons into UV‐visible pulsed fluorescence with the light yield of 5000 photons/MeV. This finding plays a valuable role in the development of organic‐inorganic hybrid copper(I) based scintillators. [ABSTRACT FROM AUTHOR]

We report a study of composite scintillating ceramics based on coupled layers of two different garnets, namely Ce-doped gadolinium gallium aluminium (GGAG:Ce) and Pr-doped yttrium aluminium (YAG:Pr), fabricated by hot isostatic pressing. Two samples were prepared, with different GGAG:Ce layer thickness, 120 µm and 690 µm respectively, but with a comparable overall thickness of 1.4 mm. The key finding is that the material architecture strongly determines the scintillation response. The radioluminescence is that expected from the irradiated material when a thick layer of ceramic is exposed to X-rays. Conversely, exposing a thin layer allows a non-null probability —about 0.3% for 120 µm of GGAG— of finding an X-ray photon in the underlying layer, and thus radioluminescence from both materials is recorded. We believe these results can extend the potential of layered optical ceramics for advanced devices, such as energy- and direction-sensitive X-ray detectors. [Display omitted] [ABSTRACT FROM AUTHOR]

Alkali metal halides have long been used as scintillators for applications as sensors and detectors. Usually, a small amount of impurities are added to these inorganic materials to improve their luminescence efficiencies. We investigate the structures and luminescent properties of un-doped sodium iodide (NaI) and cesium-doped NaI (NaI:Cs) films deposited by thermal vacuum evaporation. Instead of using the toxic element thallium (Tl), we introduced cesium dopant into NaI. This is the first study for the NaI:Cs film excited by UV LED's ultraviolet C (273 nm, 4.54 eV). The luminescence spectra show two main peaks at 3.05 and 4.32/3.955 eV (for fused silica/B270 substrate), originating from the intrinsic defects and/or activator excited states and the intrinsic self-trapped excitons (STEs), respectively. In general, both Cs-doping and post-annealing processes enhance the luminescence performance of NaI films. [ABSTRACT FROM AUTHOR]

The luminescence and scintillation properties of Ce3+ doped alkali phosphate glasses 56P 2 O 5 :8Gd 2 O 3 :5Al 2 O 3 :1CeBr 3 :30XCl (PGAC:X, X = Li/Na/K/Rb/Cs) were studied for their potential applications in gamma and alpha detection. In the Fourier Transform Infrared Spectroscopy (FTIR), X-ray Luminescence (XRL), Photoluminescence (PL), and transmittance spectra, the red shift was found and explained by the concept of optical basicity. Broad Ce3+ emission and energy transfer from Gd3+ to Ce3+ were observed in XRL and PL measurements. Scintillation performance was studied by irradiating the samples under 137Cs gamma and 241Am alpha sources. The fast, intermediate, and slow decay components under gamma and alpha excitation were found around 30, 200 and 3000 ns, respectively. The decay time increased slightly from PGAC:Li to PGAC:Cs, indicating the less effective transition from Gd3+ to Ce3+. The alpha decay time was longer than the gamma decay time, revealing the Pulse Shape Discrimination (PSD) capability of the glasses for particle identification. The XRL intensity reduced significantly from PGAC:Li to PGAC:Cs samples did not reflect the scintillation tendency. By successfully detecting gamma and alpha scintillation signals, the scintillation performance of all samples was found to be similar. In general, all samples can be used for gamma and alpha detection. Using Rb+ or Cs+ ions is favorable in terms of high density and light yield, while Li+ ions enhance the transmittance and homogeneity. Furthermore, a correlation between P–O–H groups within the glass matrix and scintillation performance was also observed. [ABSTRACT FROM AUTHOR]

For the first time, hafnia (HfO2) nanoparticles have been produced by photochemical synthesis. The photochemical route has been proven to be scalable, affordable, and straightforward to create monoclinic HfO2 nanoparticles with a size of tens of nanometers. The exploitation of this route offers a chance to create large amounts of dense nanoparticles with reduced costs and time of production for future creation of large area composite scintillators for fast timing techniques. Specific annealing treatments from 450 °C to 1000 °C have been targeted to tune the structural and morphological properties and optimize the luminescence of the nanoparticles. Hafnia nanoparticles annealed at low temperature display an amorphous structure. After thermal treatment at 1000 °C, HfO2 nanoparticles crystallize into a monoclinic phase, as evidenced by thermal analyses and X-ray diffraction. Radioluminescence and photoluminescence of HfO2 have been investigated at room temperature and 77 K. The emission band of hafnia covers a range from 300 to 600 nm and it can be attributed to defects within the matrix. In particular, the highest radioluminescence intensity appears in the crystalline sample annealed at 1000 °C, thanks to the higher crystallinity degree and the reduction of non-radiative channels and quenching defects. Photoluminescence and scintillation decay have evidenced the presence of the fast decay in the nanosecond time range. Thus, due to their size, density, and spectroscopic and timing features, monoclinic hafnia nanoparticles obtained by photochemical synthesis are attractive for potential creation of large area scintillating composites. [ABSTRACT FROM AUTHOR]

The development of high‐performance X‐ray detectors requires scintillators with fast decay time, high light yield, stability, and X‐ray absorption capacity, which are difficult to achieve in a single material. Here, we present the first example of a lanthanide chalcogenide of LaCsSiS4 : 1 % Ce3+ that simultaneously integrates multiple desirable properties for an ideal scintillator. LaCsSiS4 : 1 % Ce3+ demonstrates a remarkably low detection limit of 43.13 nGyair s−1 and a high photoluminescence quantum yield of 98.24 %, resulting in a high light yield of 50480±1441 photons/MeV. Notably, LaCsSiS4 : 1 % Ce3+ exhibits a fast decay time of only 29.35±0.16 ns, making it one of the fastest scintillators among all lanthanide‐based inorganic scintillators. Furthermore, this material shows robust radiation and moisture resistance, endowing it with suitability for chemical processing under solution conditions. To demonstrate the X‐ray imaging capacity of LaCsSiS4 : 1 % Ce3+, we fabricated a flexible X‐ray detector that achieved a high spatial resolution of 8.2 lp mm−1. This work highlights the potential of lanthanide chalcogenide as a promising candidate for high‐performance scintillators. [ABSTRACT FROM AUTHOR]

The development of high‐performance X‐ray detectors requires scintillators with fast decay time, high light yield, stability, and X‐ray absorption capacity, which are difficult to achieve in a single material. Here, we present the first example of a lanthanide chalcogenide of LaCsSiS4 : 1 % Ce3+ that simultaneously integrates multiple desirable properties for an ideal scintillator. LaCsSiS4 : 1 % Ce3+ demonstrates a remarkably low detection limit of 43.13 nGyair s−1 and a high photoluminescence quantum yield of 98.24 %, resulting in a high light yield of 50480±1441 photons/MeV. Notably, LaCsSiS4 : 1 % Ce3+ exhibits a fast decay time of only 29.35±0.16 ns, making it one of the fastest scintillators among all lanthanide‐based inorganic scintillators. Furthermore, this material shows robust radiation and moisture resistance, endowing it with suitability for chemical processing under solution conditions. To demonstrate the X‐ray imaging capacity of LaCsSiS4 : 1 % Ce3+, we fabricated a flexible X‐ray detector that achieved a high spatial resolution of 8.2 lp mm−1. This work highlights the potential of lanthanide chalcogenide as a promising candidate for high‐performance scintillators. [ABSTRACT FROM AUTHOR]

This study aims to determine the optimum composition of the CeBr1−xIx compound to achieve the maximum light output. It is based on calculations of the band energy structure of crystals, specifically taking into account the characteristics of the mutual location of local and band 5d states of the Ce3+ ions. The band energy structures for CeBr2I and CeBrI2 crystals were calculated using the projector augmented wave method. The valence band was found to be formed by the hybridized states of 4p Br and 5p I. The 4f states of Ce3+ are located in the energy forbidden band gap. The conduction band is formed by the localized 5d1 states, which are created by the interaction between the 5d states of Ce3+ and the 4f0 hole of the cerium ion. The higher-lying delocalized 5d2 states of Ce3+ correspond to the energy levels of the 5d states of Ce3+ in the field of the halide Cl0 (Br0) hole. The relative location of 5d1 and 5d2 bands determines the intensity of 5d–4f luminescence. The bottom of the conduction band is formed by localized 5d1 states in the CeBr2I crystal. The local character of the bottom of the conduction band in the CeBr2I crystal favors the formation of self-trapped Frenkel excitons. Transitions between the 5d1 and 4f states are responsible for 5d–4f exciton luminescence. In the CeBrI2 crystal, the conduction band is formed by mixing the localized 5d1 and delocalized 5d2 states, which leads to quenching the 5d–4f luminescence and a decrease in the light output despite the decrease in the forbidden band gap. CsBr2I is the optimum composition of the system to achieve the maximum light output. [ABSTRACT FROM AUTHOR]

The objective of this paper is to review the use of the thermoluminescence (TL) and optically stimulated luminescence (OSL) techniques as research tools in luminescence, particularly to detect the presence of trapping centers that can degrade the efficiency of scintillators, and shape the properties of persistent phosphors, storage phosphors and dosimeters. A brief review of the main analysis techniques is provided, followed by a discussion of their limitations. Examples of applications in which the TL or OSL analyses have provided useful information on the trapping and recombination of charges created by ionizing radiation is given. [ABSTRACT FROM AUTHOR]

To reduce the issue of tri-primary color reabsorption, a new approach for single-phase phosphors as light-emitting diodes (LEDs) has been recommended. The structures, morphology, photoluminescence, thermal stability, and luminescence mechanism of a variety of Ca3Bi (PO4)3 (CBPO): Ce3+/Dy3+ phosphors were investigated. XRD characterization showed that all CBPO samples were eulytite structures. Furthermore, the energy transfer process from Ce3+ to Dy3+ in CBPO is systematically investigated in this work, and the color of light can be adjusted by changing the ratio of doped ions. Under UV light, energy is transferred from Ce3+-Dy3+ mainly through quadrupole-quadrupole interactions in the CBPO host, and doping with different Dy3+ concentrations tunes the emission color from blue to white. The thermal stability of the CBPO: 0.04Ce3+, 0.08Dy3+ samples is outstanding, and the CIE coordinates of the samples after emission have little effect with temperature, while their emission intensity at 423 K is as strong as that at room temperature, reaching 90%. The above results indicate that this CBPO material has great potential as a white light phosphor under near-UV excitation at the optimized concentration of Ce3+ and Dy3+. [ABSTRACT FROM AUTHOR]

The purpose of this research is to investigate the luminescence and scintillation properties of mixed halide scintillators K2LaBr5-xIx. The crystals of K2LaBr5-xIx:2% Ce (x = 0, 1, 2) have been synthesized by high-temperature solid-phase method and grown by vertical Bridgman method. The crystals are measured by X-ray induced luminescence spectra, optical transmittance photoluminescence spectrum, photoluminescence decay time, and pulse height spectrum. Under the UV and X-ray excitation, all of the crystal samples have typical Ce3+ double peaks corresponding to the energy level shifts of 5d1→2F5/2 and 5d1→2F7/2, with emission centers ranging from 350 to 400 nm. The photoluminescence decay time of the three crystals of K2LaBr5-xIx: Ce is about 20 ns. Under 662 keV γ-rays excitation from a 137Cs source, the energy resolution is 8.2%, 15% and 10% (FWHM), respectively. [ABSTRACT FROM AUTHOR]

Lutetium oxyorthosilicate Lu2SiO5 (LSO) and pyrosilicate Lu2Si2O7 (LPS) activated by Ce3+ or Pr3+ are known to be effective and fast scintillation materials for the detection of X-rays and γ-rays. Their performances can be further improved by co-doping with aliovalent ions. Herein, we investigate the Ce3+(Pr3+) → Ce4+(Pr4+) conversion and the formation of lattice defects stimulated by co-doping with Ca2+ and Al3+ in LSO and LPS powders prepared by the solid-state reaction process. The materials were studied by electron paramagnetic resonance (EPR), radioluminescence spectroscopy, and thermally stimulated luminescence (TSL), and scintillation decays were measured. EPR measurements of both LSO:Ce and LPS:Ce showed effective Ce3+ → Ce4+ conversions stimulated by Ca2+ co-doping, while the effect of Al3+ co-doping was less effective. In Pr-doped LSO and LPS, a similar Pr3+ → Pr4+ conversion was not detected by EPR, suggesting that the charge compensation of Al3+ and Ca2+ ions is realized via other impurities and/or lattice defects. X-ray irradiation of LPS creates hole centers attributed to a hole trapped in an oxygen ion in the neighborhood of Al3+ and Ca2+. These hole centers contribute to an intense TSL glow peak at 450–470 K. In contrast to LPS, only weak TSL peaks are detected in LSO and no hole centers are visible via EPR. The scintillation decay curves of both LSO and LPS show a bi-exponential decay with fast and slow component decay times of 10–13 ns and 30–36 ns, respectively. The decay time of the fast component shows a small (6–8%) decrease due to co-doping. [ABSTRACT FROM AUTHOR]

The optical, photo, and X-ray luminescence properties of Sm3+ ion-doped Li2O-Al2O3-Gd2O3-B2O3-P2O5 glasses are evaluated. The glasses are fabricated by the melt quenching technique. The absorption spectra exhibit the hypersensitive transitions 6H5/2→6P3/2 and 6H5/2→6F7/2 0at the visible and near-infrared range respectively. The glasses display four major transitions characteristic of Sm3+ ion for photoluminescence and X-ray luminescence, with the most intense one corresponding to the 4G5/2→6H7/2 transition. The best emitting samarium concentration obtained by X-ray excitation is compared to BGO crystals. The integral scintillation efficiency of glass is determined by total area under all of peak spectrum. The results indicate the promising application of these glasses in scintillators and for X-ray sensing devices. [ABSTRACT FROM AUTHOR]

Gallium nitride is a wide-direct-bandgap semiconductor suitable for the creation of modern optoelectronic devices and radiation tolerant detectors. However, formation of dislocations is inevitable in MOCVD GaN materials. Dislocations serve as accumulators of point defects within space charge regions covering cores of dislocations. Space charge regions also may act as local volumes of enhanced non-radiative recombination, deteriorating the photoluminescence efficiency. Surface etching has appeared to be an efficient means to increase the photoluminescence yield from MOCVD GaN materials. This work aimed to improve the scintillation characteristics of MOCVD GaN by a wet etching method. An additional blue photo-luminescence (B-PL) band peaking at 2.7–2.9 eV and related to dislocations was discovered. This B-PL band intensity appeared to be dependent on wet etching exposure. The intensity of the B-PL was considerably enhanced when recorded at rather low temperatures. This finding resembles PL thermal quenching of B-PL centers. The mechanisms of scintillation intensity and spectrum variations were examined by coordinating the complementary photo-ionization and PL spectroscopy techniques. Analysis of dislocation etch pits was additionally performed by scanning techniques, such as confocal and atomic force microscopy. It was proved that this blue luminescence band, which peaked at 2.7–2.9 eV, is related to point defects those decorate dislocation cores. It was shown that the intensity of this blue PL band was increased due to enhancement of light extraction efficiency, dependent on the surface area of either single etch-pit or total etched crystal surface. [ABSTRACT FROM AUTHOR]

Synthesis in the radiation field is a promising direction for the development of materials transformation processes, especially those differing in melting temperature. It has been established that the synthesis of yttrium–aluminum ceramics from yttrium oxides and aluminum metals in the region of a powerful high-energy electron flux is realized in 1 s, without any manifestations that facilitate synthesis, with high productivity. It is assumed that the high rate and efficiency of synthesis are due to processes that are realized with the formation of radicals, short-lived defects formed during the decay of electronic excitations. This article presents descriptions of the energy-transferring processes of an electron stream with energies of 1.4, 2.0, and 2.5 MeV to the initial radiation (mixture) for the production of YAG:Ce ceramics. YAG:Ce (Y3Al5O12:Ce) ceramics samples in the field of electron flux of different energies and power densities were synthesized. The results of a study of the dependence of the morphology, crystal structure, and luminescence properties of the resulting ceramics on the synthesis modes, electron energy, and electron flux power are presented. [ABSTRACT FROM AUTHOR]

Micron/sub-micron hard X-ray imaging is an important development direction of X-ray detection technology. Scintillation screens with excellent X-ray stopping power and high light output are desired to obtain good imaging quality. Europium-doped lutetium oxide (Lu 2 O 3 :Eu) film with micro-columnar structure is an ideal candidate for this application. In this study, micro-columnar structured Lu 2 O 3 :Eu films were prepared on quartz glass substrates by laser chemical vapor deposition (LCVD) method. The influences of preparation conditions on structure and morphology properties of films were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Photoluminescence and scintillation properties of the films, including photoluminescence excitation (PLE), photoluminescence (PL), PL decay, X-ray excitation luminescence (XEL), and afterglow curves, were recorded. The relationships between structure, morphology, luminescence properties of films, and preparation conditions were investigated and discussed as well. The preparation conditions include laser power, oxygen flow rate, and precursor evaporation temperature. In addition, dual-layer Lu 2 O 3 :Eu film was prepared for the first time by just turning off the laser. [ABSTRACT FROM AUTHOR]

It is well known that scintillator performance, especially its energy resolution, is highly dependent on its homogeneity which is determined through its growth process. Therefore, examination and quality control of synthesized scintillators is an important step towards their improvement. Ionoluminescence (IL) microscopy is a highly sensitive and non-destructive technique which can reveal the texture, chemical composition and distribution of trace elements in the inhomogeneous specimens. In this research work, IL microscopy technique is employed for the first time to provide images of two synthesized CsI(Na) crystals. The results show that IL microscopy is not only capable of determining the distribution of the total luminescence emitted from each point, but can also determine it for individual luminescence bands, which represents special luminescence centers in the sample. Therefore, IL microscopy is introduced as a high potential technique for effective characterization of scintillators. [ABSTRACT FROM AUTHOR]

The study deals with the use of different amounts of MgO or tetraethyl orthosilicate (C 8 H 20 O 4 Si, TEOS), from 0.04 wt %, 0.06 wt %, 0.08 wt %, 0.4 wt %, 0.6 wt % to 0.8 wt %, respectively, as additional sintering aids during the vacuum sintering of transparent Ce3+ doped Y 3 Al 5 O 12 (Ce:YAG) ceramics to investigate their effect on microstructure and luminescence properties. A comparative study was carried out by using X - ray diffraction, scanning electron microscopy/energy dispersive X - ray spectroscopy, optical and photo-luminesce spectra, as well as electroluminescent spectra. The dominant garnet phase was obtained even when adding 0.8 wt % of MgO or TEOS, while adding MgO led to finer average grain size (∼ 5 - 10 μm) and more homogenous distribution compared to TEOS (∼ 20 - 25 μm) in Ce:YAG ceramics. Adding a large amount of MgO was found to result in the segregation of MgO in Ce:YAG ceramics, while an excess of TEOS led to the segregation of Al 2 O 3. A strong absorption peak at 308 nm was observed in Ce:YAG ceramics with MgO sintering aids, which was ascribed to the existence of Ce4+ induced by a charge compensation effect of Mg2+. The optimum transmittance reached 80% @ 800 nm in Ce:YAG ceramics when adding 0.6 wt % TEOS, which also exhibited a maximum luminous efficacy of 106 lm/W. Si4+ was experimentally proved to have a better optimization effect on luminous efficacy compared to Mg2+. • MgO or TEOS (C 8 H 20 O 4 Si) was added as additional sintering aids in a wide amount range. • MgO proves to have distinct inhibit effect on the grain growth. • Better luminous efficacy were observed in ceramics with TEOS additives. [ABSTRACT FROM AUTHOR]

This research focuses on LPE growth, and the examination of the optical and photovoltaic properties of single crystalline film (SCF) phosphors based on Ce3+-doped Y3MgxSiyAl5−x−yO12 garnets with Mg and Si contents in x = 0–0.345 and y = 0–0.31 ranges. The absorbance, luminescence, scintillation, and photocurrent properties of Y3MgxSiyAl5−x−yO12:Ce SCFs were examined in comparison with Y3Al5O12:Ce (YAG:Ce) counterpart. Especially prepared YAG:Ce SCFs with a low (x, y < 0.1) concentration of Mg2+ and Mg2+–Si4+ codopants also showed a photocurrent that increased with rising Mg2+ and Si4+ concentrations. Mg2+ excess was systematically present in as-grown Y3MgxSiyAl5−x−yO12:Ce SCFs. The as-grown SCFs of these garnets under the excitation of α–particles had a low light yield (LY) and a fast scintillation response with a decay time in the ns range due to producing the Ce4+ ions as compensators for the Mg2+ excess. The Ce4+ dopant recharged to the Ce3+ state after SCF annealing at T > 1000 °C in a reducing atmosphere (95%N2 + 5%H2). Annealed SCF samples exhibited an LY of around 42% and similar scintillation decay kinetics to those of the YAG:Ce SCF counterpart. The photoluminescence studies of Y3MgxSiyAl5−x−yO12:Ce SCFs provide evidence for Ce3+ multicenter formation and the presence of an energy transfer between various Ce3+ multicenters. The Ce3+ multicenters possessed variable crystal field strengths in the nonequivalent dodecahedral sites of the garnet host due to the substitution of the octahedral positions by Mg2+ and the tetrahedral positions by Si4+. In comparison with YAG:Ce SCF, the Ce3+ luminescence spectra of Y3MgxSiyAl5−x−yO12:Ce SCFs greatly expanded in the red region. Using these beneficial trends of changes in the optical and photocurrent properties of Y3MgxSiyAl5−x−yO12:Ce garnets as a result of Mg2+ and Si4+ alloying, a new generation of SCF converters for white LEDs, photovoltaics, and scintillators could be developed. [ABSTRACT FROM AUTHOR]

Thin luminescent films of the organometallic complex of lithium 8-hydroxyquinolate Liq on glass substrates were fabricated by capillary deposition and lithography. The spectral-luminescent properties of the obtained film structures were investigated. The film surface was analyzed. The light yield and the kinetics of scintillation emission of the obtained film structures are estimated. [ABSTRACT FROM AUTHOR]

A bis‐heteroleptic Ru(II) complex, 1[PF6]2 of a benzimidazole substituted pyridyl‐1,2,3‐triazole ligand (BiPT) for highly selective luminescence turn‐on detection of hypochlorous acid (HOCl) is reported. Detection of HOCl is achieved by the Markovnikov addition of HOCl to the C=C bond of 1,2,3‐triazole and a successive highly specific C(sp2)‐H chlorination at the C5 position of 1,2,3‐triazole. The chlorination at C5 in 1,2,3‐triazole is supported by high‐resolution mass spectrometry and 1H NMR study. 1[PF6]2 shows high sensitivity towards HOCl in PBS buffer (pH 7.4) containing 5 % acetonitrile with a 37‐fold luminescence light‐up and a detection limit as low as 7.5 μM. HOCl mediated C(sp2)‐H chlorination increases the 3MC‐3MLCT energy gap as well as the population of the 3MLCT excited state and exhibits the radiative decay from the excited state of 1. The probe showed low cytotoxicity and efficiently permeated the cell membrane. The cell‐imaging experiments revealed rapid staining of the HeLa cells in the presence of exogenous HOCl. [ABSTRACT FROM AUTHOR]

Novel near-infrared (NIR) phosphors are in demand for light-emitting diode (LED) devices to extend their suitability for new applications and, in turn, support the sustainable and healthy development of the LED industry. The Cr3+ has been used as an activator in the development of new NIR phosphors. However, one main obstacle for the Cr3+-activated phosphors is the low luminescence efficiency due to the spin-forbidden d-d transition of Cr3+. The rare-earth (RE) huntite minerals that crystallize in the form of REM3(BO3)4 (M = Al, Sc, Cr, Fe, Ga) have a large family of members, including the rare-earth scandium borates of RESc3(BO3)4. Interestingly, in our research, we found that the luminescence efficiency of Cr3+ in the CeSc3(BO3)4 host, whose quantum yield was measured at 56%, is several times higher than that in GdSc3(BO3)4, TbSc3(BO3)4, and LuSc3(BO3)4 hosts. Hereby, the energy conversion and transfer in the luminescence of CeSc3(BO3)4:Cr3+ phosphor were examined. The Stokes shift of electron energy conversion within the Cr3+ 4T2g level for the emission at 818 nm and excitation at 625 nm in CeSc3(BO3)4 host was evaluated to be 3775.1 cm−1, and the super-large splitting energy of the 2F5/2 and 2F72 sub-states of the Ce3+ 4f1 state, about 3000 cm−1, was found in CeSc3(BO3)4 host. The typical electronic thermal vibration peaks were observed in the excitation spectra of CeSc3(BO3)4:Cr3+. On this basis, the smallest phonon energy, around 347.7 cm−1, of the CeSc3(BO3)4 host was estimated. Finally, the energy transfer that is responsible for the far higher photoluminescence of Cr3+ in CeSc3(BO3)4 than in other hosts was proven through the way of Ce3+ emission and Cr3+ reabsorption. [ABSTRACT FROM AUTHOR]

For the first time, terbium-activated gadolinium tantalo-niobates were synthesized ((Gd1‒xTbx)NbyTa1–yO4). The synthesis was carried out by the liquid-phase method. All studied materials had the main crystalline modification M GdNbO4. The content of impurity phases did not exceed 2–5%. The photo- and cathodoluminescence spectra were studied. Concentration quenching of the terbium ion luminescence for a series of solid solutions containing tantalum ((Gd1–xTbx)Nb0.9Ta0.1O4) occurs earlier than for pure gadolinium niobates ((Gd1–xTbx)NbO4). The obtained materials are promising for use as scintillators. [ABSTRACT FROM AUTHOR]

Pr3+ doped high density germanate glasses were prepared by the melt-quenching method. The physical and luminescent properties were investigated. The glass containing BaF 2 represented maximum phonon energy of 810 cm−1, and the glass density was greater than 6 g/cm3. The glass exhibited good radiation resistance under 2 h of X-ray irradiation. Intense blue, green emissions and weak red emissions were observed when the glass was excited by X-ray, and the blue fluorescence lifetimes were in the range of 9.15–12.59 μs The results show that Pr3+ doped germanate glass could be a potential scintillating material in the field of X-ray detection for fast events. [ABSTRACT FROM AUTHOR]

CsPbBr3 perovskite nanocrystals (PNCs) are the focus of recent basic and applied research, with special emphasis on their use in photovoltaic cells, hybrid light-emitting diodes, single-photon sources, basic elements of optical computers, and other optoelectronic devices. The main problem limiting the use of PNCs is their low stability under normal conditions. Development of composite materials where PNCs are embedded in polymer matrices is an approach to solving the problem of the stability of PNCs contacting the atmosphere. Here, we report the results of experiments on designing composite thin films (TFs) consisting of PNCs and modified polymethyl methacrylate (PMMA). Specifically, samples of durable TFs containing CsPbBr3 with a high photoluminescence quantum yield have been engineered, optimal parameters (including the spinning time, spinning rate, and concentration) for the spin-coating fabrication of the TFs have been found, and the TFs with a highly homogenous film coating have been obtained. This last factor is an important criterion for the use of PNC–PMMA composite as an active layer in quantum dot light-emitting diodes (QDLEDs). In addition, since PNCs are promising as a basis for the scintillating coating of detectors, whose performance depends on the homogeneity of the luminophore distribution within the scintillator (e.g., a CCD array), the results of this study could be used in developing X-ray detectors for medical applications. [ABSTRACT FROM AUTHOR]

In this study, the infrared optically stimulated luminescence (IRSL) of single crystals of Ce3+ doped yttrium aluminum garnet (YAG) was investigated for the first time. It was found that infrared stimulation of these crystals, following previous exposure to beta radiation, produces a strong luminescence signal. The highest luminescence efficiency was exhibited by the YAG crystal with 0.1% of Ce. With this crystal, it was possible to measure as low doses as 0.1 mGy. Moreover, IRSL is mainly related to the TL peak at a relatively high temperature of c.a. 175 °C, which leads to quite good stability of the signal in time. These properties create good prospects for potential applications of YAG:Ce in dosimetric radiation measurements [ABSTRACT FROM AUTHOR]

Although low‐dimensional hybrid metal halides have emerged as promising light emitters due to their broadband emission originated from self‐trapped exciton (STE), the synthesis of lead‐free halides with high photoluminescence quantum yield remains a challenge. Herein, a series of new luminescent single crystals of antimony‐based metal halides [Na(DMSO)2]3SbBr6−xClx (x = 0, 2, 3, 4, 6) is synthesized. By optimizing the ratio of Br and Cl, [Na(DMSO)2]3SbBr3Cl3 exhibits an ultra‐broadband yellow light emission peaking at 606 nm with a full width at half‐maximum of 160 nm and a high photoluminescence quantum yield of 90.6%. Both experimental characterizations and theoretical calculations indicate that STE emission is responsible for the ultra‐broadband yellow light emission. Furthermore, blue LED chip‐pumped white light‐emitting diodes by using the yellow‐emitting [Na(DMSO)2]3SbBr3Cl3 are demonstrated, showing a correlated color temperature of 3948 K and a color rendering index of 85. Finally, a large‐size and flexible [Na(DMSO)2]3SbBr3Cl3 scintillator used for X‐ray imaging is prepared by a template assembled method, exhibiting a high spatial resolution of 15.5 lp mm−1 and a low detection limit of 285.8 nGyair s−1. This work highlights the potential of Sb‐based halides in solid‐state illumination and X‐ray imaging. [ABSTRACT FROM AUTHOR]

Oxyfluoride glass ceramics with low toxicity, high stability and strong X-ray excited luminescence intensity are introduced as scintillating material. Herein, a series of novel NaGd 2 F 7 :xTb3+ (x = 0, 0.1, 0.2, 0.3, 0.4) were synthesized through in situ growth self-crystallization. X-ray diffraction, fourier transform infrared spectrometer and transmission electron microscopy were measured to investigate the structure and morphology of NaGd 2 F 7 glass ceramics. These investigations demonstrate that NaGd 2 F 7 nanocrystals are uniformly distributed in glass matrix with 20–30 nm diameter. Photoluminescence and X-ray excitation spectra are greatly enhanced after further thermal treatment which verify better crystallization of NaGd 2 F 7 glass ceramics. The X-ray excited luminescence of the GC2–640 sample can reach 143.8% of the commercial BGO. More importantly, the damaged material can be completely repaired by annealing at 350 °C for 30 min. Our investigation indicates that Tb-doped transparent NaGd 2 F 7 glass ceramics are potential candidates of X-ray scintillating material. [ABSTRACT FROM AUTHOR]

In the present article, the influence of the activator concentration and impurity content of raw materials on the luminescence and scintillation properties of Li2CaSiO4 was studied. Polycrystalline powder material was obtained by the sol–gel method. It was shown that europium had limited solubility in the host lattice with a limiting concentration proximate to 0.014 formula units. The maximum intensity of photoluminescence was observed with a divalent europium concentration of 0.002 formula units; the light yield under alpha-particle excitation was measured to be 21,600 photons/MeV for ~200 μm of coating, and under neutron excitation, it was calculated to be 103,800 photons/n, the scintillation kinetics was characterized by an effective decay time of 157 ns. These properties and the transparency in the visible spectrum make it possible to produce scintillation screens with a coating of Li2CaSiO4 for detecting neutrons, alpha particles and low-energy beta radiation. The low Zeff (~15) of this compound makes it less sensitive to gamma rays. The 480 nm blue emission peak makes this material compatible with most commercial PMT photocathodes, CCD cameras and silicon photomultipliers, which have a maximum quantum efficiency in the blue–green spectral region. [ABSTRACT FROM AUTHOR]

The ability of a scintillator to absorb and convert the high-energy X-ray photons to low-energy visible photons is crucial for the application of X-ray in medical tests, security checks and scientific research. However, traditional scintillation crystals are synthesized by complex preparation process with high cost, hindering the wide development in practical applications. Here, Tb3+ doped sodium silicate glass, which exhibits remarkable scintillation property and recoverability to X-ray irradiation, was successfully prepared by an exercisable melt-quenching method. The obtained scintillator shows intense radioluminescence, which is about 1.5 times higher than that of the reference of Bi 4 Ge 3 O 12. The damaged glass to X-ray irradiation can be returned to the original state after heat treatment again, indicating excellent recovery. Moreover, the scintillator displays wonderful thermal stability with the fluorescence intensity at 573 K still remaining 96% at room temperature. These results demonstrate that the obtained scintillating glass has potential application towards the real world. [ABSTRACT FROM AUTHOR]

The photoluminescence and scintillation properties of n-bromophenethylammonium lead chloride ((n-BrPEA) 2 PbCl 4) (n = 4, 3, and 2) and phenethylammonium lead chloride ((PEA) 2 PbCl 4) have been investigated. All the samples showed broad emission peaks at 400–700 nm upon excitation by UV light or X-ray. The decay time constants of 8–28 ns were obtained which originated from the recombination of self-trapped exciton (STE) within inorganic layers. The afterglow levels at 20 ms after 2 ms of X-ray irradiation of (4-BrPEA) 2 PbCl 4 and (3-BrPEA) 2 PbCl 4 (76 and 55 ppm) were better than (PEA) 2 PbCl 4 (379 ppm). The light yield of (4-BrPEA) 2 PbCl 4 (3100 photons/5.5 MeV-α) was higher than (PEA) 2 PbCl 4 (1400 photons/5.5 MeV-α). • (BrC 6 H 4 C 2 H 4 NH 3) 2 PbCl 4 crystals were grown by the slow cooling method. • All the crystals showed the luminescence due to the recombination of the self-trapped excitons confined in inorganic layers. • The (4-BrC 6 H 4 C 2 H 4 NH 3) 2 PbCl 4 crystal showed the highest QY in the present crystals. • The light yields of the (4-BrC 6 H 4 C 2 H 4 NH 3) 2 PbCl 4 crystals surpassed that of the unsubstituted crystal. [ABSTRACT FROM AUTHOR]

Ce differently (0, 0.01, 0.1, 1, 2 and 5% with respect to Mg) doped LiMgAlF 6 ceramics were synthesized by the spark plasma sintering (SPS) method. In photoluminescence (PL), emission bands appeared at 300 nm with 30 ns day time, and these emission properties were almost the same in scintillation under X-ray irradiation. Further, thermally stimulated luminescence (TSL) was observed after X-ray irradiation, and the primary glow peak temperature was 160 °C with a lower detection limit of ∼10 mGy. • Ce-doped LiMgAlF 6 ceramics were prepared by the spark plasma sintering method. • Photoluminesence and scintillation properties were investigated. • Thermally stimulated luminescence properties were evaluated. [ABSTRACT FROM AUTHOR]

Intrinsic luminescence in Ce-doped (Lu,Y) 2 SiO 5 (or LYSO:Ce) single crystals have been studied by means of excitation luminescence spectroscopy in the vacuum ultraviolet energy range under synchrotron radiation. A previously unreported luminescence band with emission at 250 nm has been discovered as well as its thermal behavior was described in the temperature range 10–120 K. The excitation spectra as well as time-resolved properties of this band suggest that this emission corresponds either to the singlet component of self-trapped exciton or to a self-trapped exciton in the lutetium sublattice of LYSO single crystals. • New previously unreported intrinsic emission band at 250 nm has been observed in LYSO single crystals. • Temperature dependencies of intrinsic luminescence have been measured and analyzed. • Two possible origins of new 250 nm emission are proposed and discussed. [ABSTRACT FROM AUTHOR]

Ce,Mg:Lu 2 YGa x Al 5-x O 12 (x = 1.5, 2, 2.5, 3) ceramic scintillators were fabricated by oxygen sintering combined with air annealing using nano-powders synthesized by the co-precipitation method. The Ce3+ 5d 1 → 4f (2F 5/2 , 2F 7/2) luminescence band was blue shifted with increasing Ga content due to the decrease in the crystal field splitting of the 5d levels. At room temperature (RT), the decrease of photoluminescence decay time and scintillation decay time was observed with increasing Ga content. At 662 keV γ-rays, the sample Ga2 exhibited high light yield (LY) of 28,700 photons/MeV, fast scintillation decay times of 17.7 ns (17 %) + 45.7 ns (83 %), and good time resolution of ∼220 ps. At RT, the decrease of LY value for the samples Ga2.5 and Ga3 could be attributed to the larger thermal ionization of the excited Ce3+ centers. • Scintillation properties of Ce,Mg:Lu 2 YGa x Al 5-x O 12 (x = 1.5, 2, 2.5, 3) ceramics are investigated. • All ceramic samples show fast effective scintillation decay time less than 47 ns. • Sample x = 2 shows high LY of ∼28,700 ph/MeV @662 keV γ rays. • Samples x = 2 and 2.5 show good coincidence time resolution of 220 ps. [ABSTRACT FROM AUTHOR]