Search

Liquid metal (LM) droplet‐embedded polymer composites with exceptional thermal, electrical, and mechanical characteristics are attractive for applications in soft electronics and thermal management. Generally, a high volume fraction of LMs is required for desirable thermal and electrical properties, and thus recycling of LMs is favorable and cost effective. However, recycling LMs from composites remains a formidable challenge because the LM droplets are typically dispersed into a permanent covalently crosslinked polymer matrix. Here, a facile synthesis of LM‐polymer composites with high electrical conductivity (1800 S cm−1), high stretchability (1400% tensile strain), as well as degradability and recyclability is reported. The composite comprises a poly(2‐hydroxyethyl acrylate) hydrogel that is physically crosslinked by LM nanodroplets as a polymer matrix and either LM microdroplets or silver microflakes as a conductive filler. A postdrying process improves the mechanical performance of the composite while creating percolating pathways via the rearrangement of the conductive fillers, imparting high electrical conductivity to the composite. Moreover, the composites are readily degraded and dissolved in aqueous alkali solutions at room temperature thanks to the reactive nature of LM crosslinks, enabling high recycling efficiency of ≈80% and 95% for composites with LM microdroplets and silver microflakes as conductive fillers, respectively. [ABSTRACT FROM AUTHOR]

This study investigates the rheological properties of dual-network hydrogels based on acrylamide and sodium alginate under large deformations. The concentration of calcium ions affects the nonlinear behavior, and all gel samples exhibit strain hardening, shear thickening, and shear densification. The paper focuses on systematic variation of the alginate concentration—which serves as second network building blocks—and the Ca2+-concentration—which shows how strongly they are connected. The precursor solutions show a typical viscoelastic solution behavior depending on alginate content and pH. The gels are highly elastic solids with only relatively small viscoelastic components, i.e., their creep and creep recovery behavior are indicative of the solid state after only a very short time while the linear viscoelastic phase angles are very small. The onset of the nonlinear regime decreases significantly when closing the second network (alginate) upon adding Ca2+, while at the same time the nonlinearity parameters (Q0, I3/I1, S, T, e3/e1, and v3/v1) increase significantly. Further, the tensile properties are significantly improved by closing the alginate network by Ca2+ at intermediate concentrations. [ABSTRACT FROM AUTHOR]

Recently, numerous research studies have contributed to engineering hydrogels by soaking strategies to obtain designed properties, from mechanical strengthening to environmentally adapting. Hydrogels are three-dimensional hydrophilic polymer networks dispersed in water with widespread applications. However, most of the traditional hydrogels possess limited mechanical strength and poor temperature and environmental tolerance, which limits their applications. Due to their unique water-rich property, the physical and chemical properties of hydrogels can be post-engineered by facile soaking strategies. The soaking strategies can be divided into two categories: the first involves soaking salt solutions into the aqueous phase of the gel, and the second involves soaking in organic solvents to displace the water in the gel, forming organohydrogels. In this feature article, we aim to summarize the most recent progress in designing and engineering hydrogels using soaking strategies, including strengthening hydrogels with superior mechanical properties, and providing the hydrogels with environmentally adapting properties, such as anti-freezing and anti-dehydration. The first section summarizes some common design principles and fabrication methods to strengthen hydrogels by soaking, and then it introduces some successful applications of these soaking-induced tough hydrogels. In the second section, the soaking strategy to engineer hydrogels with environmentally adapting properties is discussed. In the end, a brief outlook is proposed based on current challenges and the pros and cons of the soaking strategy. [ABSTRACT FROM AUTHOR]

Abstract: The mechanical properties (e.g., stiffness, stretchability) of prefabricated hydrogels are of pivotal importance for diverse applications in tissue engineering, soft robotics, and medicine. This study reports a feasible method to fabricate ultrasoft and highly stretchable structures from stiff and tough hydrogels of low stretchability and the application of these switchable hydrogels in programmable shape‐morphing systems. Stiff and tough hydrogel structures are first fabricated by the mechanical strengthening of Ca2+‐alginate/polyacrylamide tough hydrogels by addition of Fe3+ ions, which introduces Fe3+ ionically cross‐linked centers into the Ca2+ divalent cross‐linked hydrogel, forming an additional and much less flexible trivalent ionically cross‐linked network. The resulting stiff and tough hydrogels are exposed to an L‐ascorbic acid (vitamin C, VC) solution to rapidly reduce Fe3+ to Fe2+. As a result, flexible divalent ionically cross‐linked networks are formed, leading to swift softening of the stiff and tough hydrogels. Moreover, localized stiffness variation of the tough hydrogels can be realized by precise patterning of the VC solution. To validate this concept, sequential steps of VC patterning are carried out for local tuning of the stiffness of the hydrogels. With this strategy, localized softening, unfolding, and sequential folding of the tough hydrogels into complex 3D structures is demonstrated. [ABSTRACT FROM AUTHOR]

Tough hydrogels, polymeric network structures with excellent mechanical properties (such as high stretchability and toughness), are emerging soft materials. Despite their remarkably mechanical features, tough hydrogels exhibit two flaws (freezing around the icing temperatures of water and drying under arid conditions). Inspired by cryoprotectants (CPAs) used in the inhibition of the icing of water in biological samples, a versatile and straightforward method is reported to fabricate extreme anti-freezing, non-drying CPA-based organohydrogels with long-term stability by partially displacing water molecules within the pre-fabricated hydrogels. CPAbased Ca-alginate/polyacrylamide (PAAm) tough hydrogels were successfully fabricated with glycerol, glycol, and sorbitol. The CPA-based organohydrogels remain unfrozen and mechanically flexible even up to @70 8C and are stable under ambient conditions or even vacuum. [ABSTRACT FROM AUTHOR]

Abstract: Tough hydrogels, polymeric network structures with excellent mechanical properties (such as high stretchability and toughness), are emerging soft materials. Despite their remarkably mechanical features, tough hydrogels exhibit two flaws (freezing around the icing temperatures of water and drying under arid conditions). Inspired by cryoprotectants (CPAs) used in the inhibition of the icing of water in biological samples, a versatile and straightforward method is reported to fabricate extreme anti‐freezing, non‐drying CPA‐based organohydrogels with long‐term stability by partially displacing water molecules within the pre‐fabricated hydrogels. CPA‐based Ca‐alginate/polyacrylamide (PAAm) tough hydrogels were successfully fabricated with glycerol, glycol, and sorbitol. The CPA‐based organohydrogels remain unfrozen and mechanically flexible even up to −70 °C and are stable under ambient conditions or even vacuum. [ABSTRACT FROM AUTHOR]

Living biological tissues are made of structures with properly defined mechanical properties (toughness and stiffness) toward specific biological functions. Herein, a chemical manipulation strategy is developed to locally vary the oxidation state of Fe ions from divalent to trivalent in the tough hydrogels. The resultant trivalent ionically cross‐linked networks become less flexible and lead to a significant enhancement of the stiffness of the tough hydrogels. The mechanical strengthening of Fe2+/Ca2+‐alginate/polyacrylamide tough hydrogels is demonstrated by the oxidation with ammonium persulfate (APS). Moreover, by applying surface patterning, the mechanical properties of the tough hydrogels are spatially stiffened and thus can serve as anisotropic elements to guide the shape morphing of tough hydrogels into complex 3D structures. This method opens up a simple strategy not only to dynamically vary the mechanics of tough hydrogels, both in bulk and locally from prefabricated soft tough hydrogels, but also toward their shape morphing behaviors on demand. Stiffening and shape morphing of soft Fe2+/Ca2+‐alginate/polyacrylamide tough hydrogels is achieved by applying a chemical manipulation method to localized varying the oxidation state of Fe ions from divalent to trivalent. With this method, 3D molding or shape morphing of tough hydrogels is realized by the as‐encoded mechanical anisotropy. [ABSTRACT FROM AUTHOR]