Search

A micro gas turbine (MGT) is a potential option for distributed energy systems driven by fuel and solar energy. The dynamic characteristics of a solar-hybrid microturbine system are essential to its control development and performance assessment. In this paper, a dynamic model is proposed, including an MGT (T100), a tubular air receiver and a sensible thermal energy storage system, which are experimentally validated well. Based on the developed model, the dynamic responses of a solar-hybrid microturbine system in stand-alone mode are studied considering load and Direct Normal Irradiance (DNI) changes. Results show that the fuel consumption is greatly reduced by integrating solar energy, which comes at the cost of system instability; if the investigated system experiences a significant load decrease, heliostats must be oriented away from the air receiver to ensure a stable operation, whereas the load must be increased incrementally to avoid a compressor surge in the case of a significant load increase. Compared to load change, DNI change will cause smaller overshoots of the MGT's rotational speed and surge margin. The system is simulated with measured DNI and shows that the thermal energy storage can reduce the fluctuation of combustor inlet temperature from 130.8 °C to 12.8 °C. • A dynamic model including micro gas turbine, solar receiver and thermal energy storage sub-models is experimentally validated. • Dynamic performance of a solar-hybrid microturbine system is investigated with changing load or solar irradiation. • Control strates are proposed for the investigated system. • The maximum share of solar energy reaches 64.7% for the system with an electrical efficiency of 24.1%. [ABSTRACT FROM AUTHOR]

Intelligent design and operation optimization allow energy systems to take advantage of the flexibility that multi-generation provides. This study proposes a basic solar-driven system integrated with thermal energy storage for round-the-clock energy harvesting. A modified configuration is then designed incorporating innovative multi-heat recovery approaches to increase the capacity and product diversity of the basic system. The modified system is able to cover vital urban utilities such as electricity, fresh water, cooling, and hydrogen throughout the day. To overcome the time-consuming procedure of dynamic techno-economic simulation as well as the limitation of commercial engineering equation solvers for tri-objective optimization, a deep learning approach is developed to reduce the computational complexity and improve the analysis accuracy. In this regard, the trained neural networks play an intermediary role in coupling the developed code with the MATLAB optimization toolbox. A comparison between the modified and conventional configurations indicates that implementing the multi-heat recovery approach results in a 29% increase in power generation while only increasing the overall system cost by 1.97%. From an economic perspective, the Sankey diagram depicts that the storage unit with a cost rate of 12.25 $/h accounts for 6.77% of the plant's cost rate, which enables the system to operate continuously. According to the sensitivity analysis and contour plots, the number of collectors significantly affects the total cost rate and fresh water production capacity while it has no tangible effect on the exergy efficiency. • A novel multigeneration system with thermal energy storage is designed. • A modified configuration with heat recovery is introduced to boost the capacity. • The comparative study indicates a 17.6% improvement in the power generation. • A dynamic simulation code is developed based on meteorological data. • A deep learning techno-economic optimization is applied to the system. [ABSTRACT FROM AUTHOR]

Abstract: The discontinuous nature of the solar energy forces to study the dynamic behavior of solar plants to characterize their operations, to deepen their process understanding and to improve the performance and maintenance. The present paper focuses on the dynamic simulation and control of concentrating solar plants with the aim to define a reasonably simplified layout as well as to highlight the main issues to characterize the process dynamics of these energy systems and their related energy storages. Detailed first-principles mathematical models of key unit operations are developed, implemented, and integrated into commercial codes to improve the reliability of the plant dynamic simulation as well as the prevision accuracy. The case of Archimede concentrating solar power plant with the related two-tanks direct thermal energy storage technology is investigated. [Copyright &y& Elsevier]

The addition of thermal energy storage and natural gas as a complementary energy source improves the flexibility, reliability, and value of concentrated solar power (CSP) plants. Nevertheless, due to the transient nature of solar energy, transitions from solar-only mode and natural-gas mode to hybrid solar-natural gas mode is quite challenging, especially when the plant is equipped with thermal storage. Thus, it is important to develop proper dynamic modeling and control schemes to accurately simulate such transitions. The objective of this study is to address this subject by demonstrating a dynamic model with reliable control schemes for a highly integrated hybrid parabolic trough-natural gas plant equipped with thermal energy storage. The specific goal is to study the dynamics of adding thermal storage to the hybrid plant. It is found that the developed control schemes assist smooth transitions between different operational modes and effective utilization of thermal storage and natural gas to maintain steady power production and steam mass flow rates under different solar conditions. The results demonstrate that the integration of storage regulates power production by solar energy and natural gas during the day time. It also enables an increase in the solar fraction of the hybrid plant while it causes a small decrease in thermodynamic efficiency. The analysis shows that the hybrid plant with the storage has a substantially lower specific CO 2 emission (0.320 tonne/MWh) than single natural gas plant (0.413 tonne/MWh) although it has a higher levelized cost of electricity ($86.32/MWh against $74.92/MWh). The hybrid plant with storage demonstrates a promising potential for reliable and clean production of electricity, although research and development should be conducted to lower its cost. • A hybrid parabolic trough-natural gas plant with thermal storage is simulated. • A detailed dynamic model with reliable control schemes is developed. • The control schemes assist smooth transitions between different operational modes. • Thermal storage regulates power produced by solar and natural gas throughout days. • The hybrid plant shows promising potential for flexible and clean power production. [ABSTRACT FROM AUTHOR]