Search

In this contribution, we investigate the B_\text1 distribution and coupling characteristics of a multichannel radio frequency (RF) coil consisting of different dipole coil elements for 7 T MRI, and explore the feasibility to achieve a compromise between field distribution and decoupling by combining different coil elements. Two types of dipole elements are considered here: the meander dipole element with a chip-capacitor-based connection to the RF shield which achieves a sufficient decoupling between the neighboring elements; and the open-ended meander dipole element which exhibits a broader magnetic field distribution. By nesting the open-ended dipole elements in between the ones with end-capacitors, the B_\text1 distribution, in terms of field penetration depth and homogeneity, is improved in comparison to the dipole coil consisting only of the elements with end-capacitors, and at the same time, the adjacent elements are less coupled to each other in comparison to the dipole coil consisting only of the open-ended elements. The proposed approach is validated by both full-wave simulation and experimental results. [ABSTRACT FROM AUTHOR]

In this paper, we systematically investigate the electromagnetic (EM) field of a stripline dipole coil element backed by various shielding plates, which are characterized by surface impedance. The initial analysis is based on a 2-D finite-element-method model, where the considered surface impedance was categorized in terms of magnitude and phase. It has been demonstrated that the shielding plate can be approximately modeled by the magnitude of a complex surface impedance if the absolute EM field distribution is considered. Additionally, as the magnitude of the surface impedance increases, the magnetic and electric fields excited by the stripline tend to distribute in a broader manner. Thus, the transversal homogeneity of the B1 field of a stripline coil can be improved by a shielding plate with a high surface impedance, which has been verified by 3-D models based on single- and multi-coil elements. For the experimental validation, two shielding plates—a copper-plated substrate and a high-impedance surface, which exhibits a small and large surface impedance, respectively—are considered. An excellent agreement of field distributions between numerical simulation and measurement has been observed. [ABSTRACT FROM PUBLISHER]