Search

In this paper, a metamaterial electromagnetic energy harvester constructed via the capacitive loading of metal circular split rings is presented. Each energy-harvesting cell is loaded with a resistance that imitates the input impedance of a rectifier circuit. Specifically, the metamaterial energy harvester has high selective harvesting for left- and right-handed circularly polarized waves. Here, the energy absorption is mostly induced by the resistive load; thus, effective energy harvesting can be achieved. Moreover, the proposed energy harvester exhibits a high-efficiency harvesting for right-handed circularly polarized waves over a wide range of incident angles. Further, a transmission line model is adopted to interpret the energy harvesting mechanism, which shows that a good impedance matching and low dielectric loss can further enhance the harvesting efficiency. To demonstrate the design, a 15 15 unit-cell prototype is fabricated and measured, and the measured results reasonably agree with the simulated ones. [ABSTRACT FROM AUTHOR]

Ahigh performance metamaterial device for electromagnetic energy harvesting is presented. The unit cell of the metamaterial device consists of four identical omega ring resonators arranged in rotational symmetry, and each omega ring is loaded with a 50 Ω resistor that mimics the input impedance of a rectifier circuit. A proof-of-concept prototype is designed for operation at the frequency of 5.8 GHz. Here, the efficient energy harvesting is validated by the energy dissipated in each resistor. Based on the full absorption concept, the metamaterial device achieves a harvesting efficiency up to 93.1% under normal incidence. In addition, the energy harvester shows polarization independent and wide-angle incident frequency responses with good harvesting characteristics over the entire operating range. The surface current distribution is analyzed to gain an insight into the energy harvesting mechanism. Moreover, the harvester prototype is manufactured and measured, and the simulated and measured results are in good agreement. Due to the enhanced electromagnetic energy harvesting efficiency, the proposed device is a good candidate for microwave power transmission. [ABSTRACT FROM AUTHOR]