Search

Passive damping systems are energy dissipating devices that are used in building constructions to reduce excessive vibration caused by wind or earthquakes. Recently, the use of inerters, devices using the inertia of the rotating mass, as a passive damping system has become more and more popular. Inerter, regardless of the construction, generates a resistance force that is proportional to the relative acceleration at the terminal ends of the device. The purpose of this study is to evaluate the effectiveness of the viscoelastic (VE) dampers in combination with the inerter. For the derived equations of motion of structures with VE dampers and inerters, the Laplace transformation is applied, which leads to a nonlinear eigenproblem. The solution to the eigenproblem is obtained using the continuation method, also known as the homotopy or as the path following method. It was found that for some cases of inerter connection with ve damper, there are some additional solutions in relation to the degrees of freedom of the structure. Furthermore, the dynamic characteristics of the structure associated with the above-mentioned additional eigenvalue are strongly dependent on the equivalent inerter mass. Damping efficiency is tested by determining changes in the system's dynamic characteristics: natural frequencies, non-dimensional damping ratios and displacement transfer functions. The presented approach allows determining the appropriate parameters of the inerter and VE damper and their appropriate location on the structures that correspond to the most effective damping. The obtained numerical results confirm the effectiveness of the proposed approach. [ABSTRACT FROM AUTHOR]

• FE solution of harmonic vibrations for VE layered plates with exponential complex-conjugate form and refined zig-zag theory. • Effective application of the continuation method to solve the discretised amplitude equation. • Numerous analyses of the influence of various plate and formulation parameters on the resonance behaviour of laminate plates. The paper is devoted to the numerical analysis of the harmonic vibrations of laminate plates with viscoelastic layers in the von Kàrmàn geometrically non-linear regime. The amplitude equation derived in the prequel paper Part 1 – theoretical background is discretized using the 8-noded bi-quadratic plate finite elements. The response curves are obtained using the continuation method to solve the discretised amplitude equation treated as the equation with the frequency of vibrations as a parameter. The proposed method of solution is verified by comparing the results with those from available literature. Furthermore, several numerical analyses are performed, including testing of FE mesh density, plate aspect ratio, various VE materials, support conditions and layers layout as well as the possibility of simplification of the complex-valued zig-zag function used in the description of plate kinematics. Several results of practical importance are found and discussed in the conclusions. [ABSTRACT FROM AUTHOR]

Highlights: [•] The dynamic characteristics of structures with viscoelastic dampers are determined. [•] The fractional, rheological model of damper is applied. [•] The proposed approach enables the simultaneous use of a few models of damper. [•] The equations of motion are solved using the continuation method. [•] The problem of existence of real eigenvalues is also discussed. [ABSTRACT FROM AUTHOR]

• Efficient solution procedure for non-linear eigen-value problem based on homotopy and quasi-Newton methods. • Numerical verification of the proposed formulation and testing of various solution variants. • Extensive analyses of results sensitivity to the model parameters. In this paper the numerical procedure to solve the non-linear eigen-value problem describing the free vibrations of the laminate plates with viscoelastic (VE) layers is presented. The derivation of that main equation based on the refined zig-zag theory and using fractional Zener material model to describe VE material is presented in the companion paper Lewandowski R, Litewka P. Wielentejczyk P. Free vibrations of laminate plates with viscoelastic layers using the refined zig-zag theory – Part 1. Theoretical background. The solution obtained using the continuation method provides the required dynamic characteristics of the plates – the frequency and the damping ratio. In the iterative part of each continuation step either the full Newton or the quasi-Newton iterative procedure are used. Several numerical examples are solved to verify accuracy, efficiency and versatility of the proposed formulation. Numerous parametric studies are carried out to determine the influence of various solution variants and combinations of material parameters onto the results describing the damping properties of laminate plates. [ABSTRACT FROM AUTHOR]

• The subspace iteration method is used to solve nonlinear eigenvalue problem. • The continuation method is used to solve the nonlinear Hermitian eigenproblem. • The method presented allows determination of only a part of eigenvalues. • The method was tested for structures with viscoelastic elements. • The models of VE elements are described with the help of fractional derivatives. The paper presents an extension of the subspace iteration method for application in systems with viscoelastic damping elements, which are described by both classical and fractional models. The presented method enables determination of only a certain number of eigenvalues and associated eigenvectors. This is very useful, especially when the considered problem has many degrees of freedom, in which case it would be very time-consuming or even impossible to determine all the eigenvalues. At the same time, from the engineering point of view, it is not necessary to know all the eigenvalues. In this paper, the subspace iteration method is used for the first time to solve the nonlinear eigenproblems which appear in the dynamic analysis of systems with viscoelastic damping elements. The proposed solution consists of assuming the number of eigenvalues to be determined, taking the initial point of iteration and then solving the nonlinear reduced eigenproblem with Hermitian matrices in each iterative loop. The solution to the reduced eigenproblem is obtained using the continuation method, and it is an additional novelty in the paper. The correctness and effectiveness of the proposed approach are illustrated with numerical examples. [ABSTRACT FROM AUTHOR]