Search

This short communication describes the climate change impacts of using cellulose, and more precisely cellulosic fiber-based materials, in food packaging, representing current and emerging industrial state of the art technology, without specific reference to current scientific advances. First, the different types of cellulosic fiber-based packaging materials, which can be used to replace fossil-based packaging materials, are presented for flexible and rigid applications. The focus is on technological solutions with packaging properties that enable the protection of commonly sold food products. The manufacturing processes associated with these cellulosic fiber-based materials is described and the environmental impact assessment of 4 selected case studies presented: stand-up pouches, flexible flow wraps, frozen or chilled food trays, and molded pulp lids. A simplified eco-design Life Cycle Assessment (LCA) was then performed to compare each solution with its fossil-based counterpart. Differences and similarities between the various cellulosic solutions have been identified. Furthermore, the assessment confirms that cellulosic fiber-based materials have reduced environmental impacts as compared to fossil-based counterparts, if a similar packaging weight is obtained. Indeed, all impacts of plastics are between 3 and 5 kg CO 2 eq/kg, while all impacts of cellulosic fiber-based materials are below 1.5 kg CO 2 eq/kg., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Climate change mitigation benefits from the land sector are not being fully realised because of uncertainty and controversy about the role of native forest management. The dominant policy view, as stated in the IPCC's Fifth Assessment Report, is that sustainable forest harvesting yielding wood products, generates the largest mitigation benefit. We demonstrate that changing native forest management from commercial harvesting to conservation can make an important contribution to mitigation. Conservation of native forests results in an immediate and substantial reduction in net emissions relative to a reference case of commercial harvesting. We calibrated models to simulate scenarios of native forest management for two Australian case studies: mixed-eucalypt in New South Wales and Mountain Ash in Victoria. Carbon stocks in the harvested forest included forest biomass, wood and paper products, waste in landfill, and bioenergy that substituted for fossil fuel energy. The conservation forest included forest biomass, and subtracted stocks for the foregone products that were substituted by non-wood products or plantation products. Total carbon stocks were lower in harvested forest than in conservation forest in both case studies over the 100-year simulation period. We tested a range of potential parameter values reported in the literature: none could increase the combined carbon stock in products, slash, landfill and substitution sufficiently to exceed the increase in carbon stock due to changing management of native forest to conservation. The key parameters determining carbon stock change under different forest management scenarios are those affecting accumulation of carbon in forest biomass, rather than parameters affecting transfers among wood products. This analysis helps prioritise mitigation activities to focus on maximising forest biomass. International forest-related policies, including negotiations under the UNFCCC, have failed to recognize fully the mitigation value of native forest conservation. Our analyses provide evidence for decision-making about the circumstances under which forest management provides mitigation benefits.

Shell calcification in argonauts is unique. Only females of these cephalopods construct the paper nautilus shell, which is used as a brood chamber for developing embryos in the pelagic realm. As one of the thinnest (225 μm) known adult mollusc shells, and lacking an outer protective periostracum-like cover, this shell may be susceptible to dissolution as the ocean warms and decreases in pH. Vulnerability of the A. nodosa shell was investigated through immersion of shell fragments in multifactorial experiments of control (19 °C/pH 8.1; pCO(2) 419; Ω(Ca) = 4.23) and near-future conditions (24 °C/pH 7.8-7.6; pCO(2) 932-1525; Ω(Ca) = 2.72-1.55) for 14 days. More extreme pH treatments (pH 7.4-7.2; pCO(2) 2454-3882; Ω(Ca) = 1.20-0.67) were used to assess tipping points in shell dissolution. X-ray diffractometry revealed no change in mineralogy between untreated and treated shells. Reduced shell weight due to dissolution was evident in shells incubated at pH 7.8 (projected for 2070) after 14 days at control temperature, with increased dissolution in warmer and lower pH treatments. The greatest dissolution was recorded at 24 °C (projected for local waters by 2100) compared to control temperature across all low-pH treatments. Scanning electron microscopy revealed dissolution and etching of shell mineral in experimental treatments. In the absence of compensatory mineralization, the uncovered female brood chamber will be susceptible to dissolution as ocean pH decreases. Since the shell was a crucial adaptation for the evolution of the argonauts' holopelagic existence, persistence of A. nodosa may be compromised by shell dissolution in an ocean-change world.

The carbon footprint is one of the main factors for measuring CO emissions2, this atmospheric gas represents a worldwide environmental problem. Currently, universities are making inroads into the solution through the quantification and mitigation of CO2. Academic activities and the delivery of physical documents generate high amounts of paper consumption and consequently levels of CO2, which establishes a problem. The objective is to estimate the carbon footprint of the Universidad Técnica Estatal de Quevedo (UTEQ) located in Ecuador. The methodology employed consisted of a quantification of the number of files registered in the academic system per year. The files were multiplied by an average number of sheets obtained through a survey applied to teachers. The carbon footprint was determined by multiplying the CO emission factor2 by annual paper consumption. The emissions obtained are 3.21 ton CO2 eq to 3.00 ton CO2 eq for the year 2020-2021 and 2021-2022, respectively. The virtual education implemented at UTEQ contributed to the fulfillment of climate change objectives, due to the non-emitted CO2 emissions determined in this study, an issue that is related to the achievement of a green university. [ABSTRACT FROM AUTHOR]

Recent research has indicated high economic and environmental costs of human paper usage. Technologies have been developed to reduce consumers' paper use behavior, including mechanical dispensers that institute a delay between opportunities to obtain each consecutive unit. However, there is no empirical evidence that these dispensers or delays reduce paper use. In Experiment 1, implementing a delay between paper-unit deliveries using mechanical dispensers in a university cafe resulted in a significant decrease in units per person, material per person, and cost per person, compared to free-access dispensers. In Experiment 2, a relatively long delay was more effective than a short delay in reducing paper consumption in a laboratory experiment using mechanical dispensers. These results indicate that delays could be used to decrease paper use in many contexts on a larger scale. More research is necessary to determine the underlying behavioral mechanisms responsible for the observed reduction and the cost-benefit relationship under different circumstances. Keywords Reinforcement delays * Paper dispensers * Sustainability * Climate change * Behavioral nudges, Sustainability is rooted in human behavior, which is controlled by variables that can be manipulated (Baum, 2005; Skinner, 1953; Ylek & Steg, 2007). Verbal strategies (e.g., requests, education, information) to [...]

Abstract: A simple transfer function has been used to predict indoor temperature and humidity from outdoor climate. Using downscaled output from the Hadley Model (HadCM3) changes in indoor climate through to 2100 were predicted for an idealised unheated room at a number of European sites. The potential threats to paper and the risk of salt damage were predicted using damage functions. Although paper faces an increased risk in some temperate locations, salt weathering can increase or decrease dependent on location. Many future indoor climates may already exist at other locations, so communication throughout the heritage sector offers examples for the management of future challenges. Climate change is relatively slow so there is ample time for the adoption of good practices at these locations. [Copyright &y& Elsevier]

Abstract: This paper estimates the effects of humidity and temperature on mortality rates in the United States (c. 1973–2002) in order to provide an insight into the potential health impacts of climate change. I find that humidity, like temperature, is an important determinant of mortality. Coupled with Hadley CM3 climate-change predictions, I project that mortality rates are likely to change little on the aggregate for the United States. However, distributional impacts matter: mortality rates are likely to decline in cold and dry areas, but increase in hot and humid areas. Further, accounting for humidity has important implications for evaluating these distributional effects. [Copyright &y& Elsevier]

Black liquor gasification–combined cycle (BLGCC) is a new technology that has the potential to increase electricity production of a chemical pulping mill. Increased electricity generation in combination with the potential to use biomass (e.g. bark, hog fuel) more efficiently can result in increased power output compared to the conventional Tomlinson-boiler. Because the BLGCC enables an integrated pulp and paper mill to produce excess power, it can offset electricity produced by power plants. This may lead to reduction of the net-CO2 emissions. The impact of BLGCC to offset CO2 emissions from the pulp and paper industry is studied. We focus on two different plant designs and compare the situation in Sweden and the US. The CO2 emissions are studied as function of the share of recycled fibre used to make the paper. The study shows that under specific conditions the production of “CO2-free paper” is possible. First, energy efficiency in pulp and paper mills needs to be improved to allow the export of sufficient power to offset emissions from fossil fuels used in boilers and other equipment. Secondly, the net-CO2 emission per ton of paper depends strongly on the emission reduction credits for electricity export, and hence on the country or grid to which the paper mill is connected. Thirdly, supplemental use of biomass to replace fossil fuel inputs is important to reduce the overall emissions of the pulp and paper industry. [Copyright &y& Elsevier]