Search

The construction sector is presently among the most resource-intensive industries, driving a substantial body of research dedicated to the development of more sustainable materials to address these demands. A particularly promising approach within the framework of the circular economy is the repurposing of waste as a principal raw material for the creation of new construction products. Within this context, the primary aim of this study is to engineer ceramic materials for brick production using 100% waste-derived inputs, specifically aggregate washing sludge and manganese mining by-products. To evaluate the potential of these sustainable ceramic materials, an extensive investigation was conducted, encompassing both physical and mechanical testing, as well as a thorough characterisation of the waste inputs. For this purpose, a series of ceramic specimens were fabricated with varying proportions of mining residues and aggregate washing sludge, adhering to the conventional protocols employed in the manufacture of ceramic bricks. The results demonstrate that these sustainable ceramics exhibit a linear shrinkage reduction of up to 5% compared to traditional clay-based ceramics. Furthermore, they show water absorption levels—whether via capillarity, cold water, or hot water absorption—that are up to twice those observed in conventional clay ceramics, while maintaining comparable density values. This increased absorption, however, correlates with a reduction in mechanical strength at higher concentrations of manganese waste, yet the material continues to meet the minimum strength requirements as specified by industry standards for such products. In conclusion, this research introduces a novel, sustainable ceramic material that not only reduces economic and environmental costs but also adheres to the required performance criteria for construction applications. [ABSTRACT FROM AUTHOR]

Mining activities are essential for a population's development; however, they also produce negative effects such as the production of waste, an impact on flora and water pollution. On the other hand, construction is one of the sectors which is most demanding of raw materials, with one of the main such materials being water. For this reason, this research evaluates the feasibility of incorporating water contaminated by mining waste into ceramic materials for bricks. In this way, the use of water is reduced and, on the other hand, the contaminating elements of the mining water are encapsulated in the ceramic matrix. To achieve this, the clay used and the contaminated water were first analysed, then different families of samples were conformed with different percentages of contaminated water. These samples were tested to determine their physical and mechanical properties. At the same time, leachate tests were carried out to determine that the ceramic material created did not cause environmental problems. The test results showed that the physical and mechanical properties of the ceramics were not influenced by the addition of contaminated water. On the other hand, the leachate tests showed that encapsulation of most of the potentially toxic elements occurred. However, the use of contaminated water as mixing water for ceramics could only be performed up to 60%, as higher percentages would leach impermissible arsenic concentrations. Accordingly, a new way of reusing water contaminated by mining activities is developed in this study, taking advantage of resources, avoiding environmental pollution and creating economic and environmentally friendly end products. [ABSTRACT FROM AUTHOR]

The greater environmental awareness, new environmental regulations and the optimization of resources make possible the development of sustainable materials as substitutes for the traditional materials used in construction. In this work, geopolymers were developed as substitutes to traditional ceramics for brick manufacture, using as raw materials: chamotte, as a source of aluminosilicate, and biomass bottom ashes from the combustion of almond shell and alpeorujo (by-product produced in the extraction of olive oil composed of solid parts of the olive and vegetable fats), as the alkaline activator. For the feasibility study, samples were made of all possible combinations of both residues from 100% chamotte to 100% biomass bottom ash. The tests carried out on these sample families were the usual physical tests for ceramic materials, notably the compression strength test, as well as colorimetric tests. The freezing test was also carried out to study the in-service behavior of the different sample groups. The families with acceptable results were subjected to Fourier transform infrared (FTIR) analysis. The results of the previous tests showed that the geopolymer was indeed created for the final families and that acceptable mechanical and aging properties were obtained according to European standards. Therefore, the possibility of creating geopolymers with chamotte and biomass bottom ashes as substitutes for conventional ceramics was confirmed, developing an economical, sustainable material, without major changes in equipment and of similar quality to those traditionally used for bricks. [ABSTRACT FROM AUTHOR]