Search

Barium fluoride (BaF2) crystals are attracting much attention as efficient inorganic scintillator promising for high‐energy physics, industrial inspection, and other fields because of the fast component of the decay time (0.6 ns) and high radiation resistance. However, two major drawbacks limit its practical application: (i) a slow decay time of ~600 ns is derived from self‐trapping excitons; (ii) the absolute light yield from the fast luminescence component is not competitive. The introducing of rare earth ions and preparation of BaF2 polycrystalline ceramics is considered to be effective measures to solve these bottlenecks. Pr3+ is extremely suitable as the activated ion of scintillation materials, which possess emission peaks located in visible band and the faster 5d–4f transition. In this work, highly sinterable Pr3+:BaF2 precursor powder was synthesized via the coprecipitation method by adjusting the reactant concentration and temperature. The morphology and microstructure of as‐synthesized powders were characterized using scanning electron microscopy (SEM) and transmittance electron microscopy analysis. The 5 at.% Pr3+:BaF2 transparent ceramic with a transmittance of 50.7% at the wavelength of 500 nm was fabricated by hot pressing the as‐prepared powders at 900°C for 4 h under the axial pressure of 50 MPa. The SEM images of ceramic cross‐section show that the residual pore is the main light scattering source. The absorption and emission spectrum of ceramic samples were discussed. [ABSTRACT FROM AUTHOR]

Mesoporous crystalline BaF 2 nanopowder with a specific surface area of up to 34.8 m2/g was produced by a pulsed electron beam through the evaporation of targets of micro-sized BaF 2 powder with optical purity (S red = 0.38 m2/g). The texture and thermal features of the BaF 2 nanopowder (before and after annealing in air at a temperature of 200 °C) and some properties of compacts made of the BaF 2 nanopowder by magnetic-pulse compaction and static pressing were studied. Glassy, opaque, and black compacts, which are promising materials for use as scintillators and dosimeters, were produced by magnetic-pulse compaction in a vacuum at a temperature of about 425 °C. It was found that heating up to 425 °C is sufficient for removing defects in nanopowders. The effect of pressing methods on the pulsed cathodoluminescence and photoluminescence spectra of the compacts was studied. Luminescent properties were found to depend on pressing technology. It was also determined that surface color centers, the number of which decreases during heating, are responsible for the pulsed cathodoluminescence band near ∼560 nm. [ABSTRACT FROM AUTHOR]

The short-wavelength sub-nanosecond luminescence in BaF 2 material, discovered in the early 80s, gave a new direction to research into fast scintillators and phosphors. In contrast to 'typical' luminescence occurring within the forbidden band gap, the new type of emission was due to transitions between the upper core and valence bands. Thus it was named core-valence luminescence (CVL); the terms cross-luminescence and Auger-free luminescence have also been used. Given its unusual nature, this new luminescence process has attracted considerable interest in the field of condensed matter physics. During the sequent decades (till the end of the previous century) CVL has been experimentally observed in several dozen compounds and the conditions for detecting CVL have been established. Interest in this kind of luminescence increased in recent years due to the emergence of new methods of crystal synthesis, the development of high-speed solid-state photodetectors, and the construction of unique modern set-ups using synchrotron radiation. This paper analyzes the numerous studies of CVL, obtained mainly over the past decade. Experimental and theoretical data on this topic are considered in detail. Special attention is given to new results on scintillation characteristics of BaF 2 in the form of single crystals, ceramics, nanoparticles, and composites. The features of CVL in binary and ternary compounds are discussed. Some Cs- and Ba-based ternary halides show relatively high light yields and represent promising fast scintillators. The prospects of using materials with CVL as fast scintillators for time-of-flight positron emission tomography and other applications are deliberated. • Overview of recent theoretical and experimental findings on Core Valence luminescence. • Most attractive CVL crystals for ultrafast scintillator applications analyzed. • Prospects for future studies and underexplored CVL materials listed. [ABSTRACT FROM AUTHOR]