Search

A cathodic-arc evaporation system with plasma-enhanced duct equipment was used to deposit TiZrN, TiZrCN, and TiZr/a-C coatings. Reactive gases (N 2 and C 2 H 2 ) activated by the Ti and Zr plasma in the evaporation process was used to deposit the TiZrCN and TiZr/a-C coatings with different C and nitrogen contents. The crystalline structures and bonding states of coatings were analyzed by X-ray diffraction and X-ray photoelectron spectroscopy. The microbial activity of the coatings was evaluated against Staphylococcus aureus (Gram-positive bacteria) and Actinobacillus actinomycetemcomitans (Gram-negative bacteria) by in vitro antibacterial analysis using a fluorescence staining method employing SYTO9 and a bacterial-viability test on an agar plate. The cell compatibility and morphology related to CCD-966SK cell-line human skin fibroblast cells on the coated samples were also determined using the 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide assay, reverse-transcriptase-polymerase chain reaction, and scanning electron microscopy. The results suggest that the TiZrCN coatings not only possess better antibacterial performance than TiZrN and TiZr/a-C coatings but also maintain good compatibility with human skin fibroblast cells. [ABSTRACT FROM AUTHOR]

The surface characteristics of biomaterials play an important role in their interaction with biological systems. Tantalum (Ta) oxides and their coatings have been proved to increase their applications in the biomedical fields such as medical devices and dental implants by improving their osseointegration and corrosion resistance. In this study, Ta and amorphous tantalum oxide coatings were deposited by using magnetron sputtering. A hydrophilic crystalline β-Ta 2 O 5 coating was obtained by rapid thermal annealing of the deposited tantalum oxide coating at 700 °C. In this study, Staphylococcus aureus and Actinobacillus actinomycetemcomitans ( A. actinomycetemcomitans ) are Gram-positive and Gram-negative bacteria, respectively, that exhibit physiological commensalism on the human skin and oral areas. Both bacteria were chosen as the model for in vitro anti-bacterial analyses by a fluorescence staining method employing Syto9. The cytocompatibility of human skin fibroblast cells (CCD-966SK) on the coatings was also determined using an MTT assay. It showed that the amorphous tantalum oxide coatings possessed good antibacterial performance, while the hydrophilic crystalline tantalum oxide coatings exhibited outperformed human skin fibroblast cellular biocompatibility. [ABSTRACT FROM AUTHOR]

Abstract: This study used a twin-gun magnetron sputtering system to deposit ZrO2-silver (Ag) coatings on biograde pure-titanium implant materials, and the Ag content in the deposited coatings was controlled by the magnetron power. The films were then annealed using rapid thermal annealing at 350°C for 2min to induce the nucleation and growth of nanoparticles on the film surface. Staphylococcus aureus (S. aureus) and Actinobacillus actinomycetemcomitans (A. actinomycetemcomitans) were used for in vitro antibacterial analyses. The cytocompatibility, mRNA expression, and adhesive morphology of human gingival fibroblast (HGF) cells on the coatings were also determined. The obtained results suggest that ZrO2-Ag composite coatings containing less than 10.6at.% Ag show hydrophobicity, good viability and proliferation of HGF cells, and antibacterial effects on S. aureus and A. actinomycetemcomitans. Moreover, the antibacterial performance of ZrO2-Ag coatings is superior to that pure-titanium whilst maintaining biological compatibility. [Copyright &y& Elsevier]

Abstract: Composite metal nitride–metal (MeN–Me) physical vapor deposited (PVD) films (e.g. TaN–Cu, TiN–Cu, ZrN–Ag, etc.) are often considered for applications such as tribological and antibacterial coatings. In this study, ZrN, ZrO2–Ag and ZrNO–Ag coatings with different Ag contents were deposited by reactive magnetron sputtering. Monoclinic ZrO2 and fcc Ag composite structures were obtained when Zr and Ag were cosputtered to react with oxygen. ZrNO–Ag showed a porous structure containing monoclinic ZrO2, fcc Ag and Zr2ON2. Actinobacillus actinomycetemcomitans (A. actinomycetemcomitans) and Staphylococcus aureus (S. aureus), major pathogens frequently found in the implant-associated infections, were cultured on the coated samples. The antibacterial effects were determined using in vitro anti-bacterial analyses by a fluorescence staining method employing Syto9 and bacterial viability agar tests. In addition, the biocompatibility of human gingival fibroblast (HGF) cells on coatings was also evaluated by a MTT test assay. It showed that the nanostructure and Ag content of the ZrO2–Ag and ZrNO–Ag coatings were correlated with the biocidal property. The ZrN coating deposited by magnetron sputtering did not improve the bacterial reduction of A. actinomycetemcomitans and S. aureus. The ZrO2–Ag and ZrNO–Ag coated samples had lower bacterial retention, and the ZrNO–Ag coatings with silver content of 11.8at.% possessed the best antibacterial performance with excellent HGF cell compatibility as well. [Copyright &y& Elsevier]

Abstract: Bacterial adhesion and colonization are considered to play key roles in the pathogenesis of peri-implant disease, which is an inflammatory process leading the destruction of both soft and hard tissue around a Titanium (Ti) implant. The osseointegration of Ti implants is influenced by their composition and surface treatment. Zirconia (ZrO2) coatings have been shown to improve implant osseointegration in various biomedical fields, including orthopedic devices and dental implants. This study used a twin-gun magnetron sputtering system to deposit ZrO2–Sliver (Ag) and ZrO2–Copper (Cu) coatings on biograde pure-Ti implant materials. The effects of Ag and Cu on the antibacterial properties of the coated Ti samples were investigated using Staphylococcus aureus (S. aureus) and Actinobacillus actinomycetemcomitans (A. actinomycetemcomitans), which are found frequently in implant-associated infections. The in vitro antibacterial analyses employed a fluorescence staining method using SYTO9 and bacterial-viability tests on agar plates. Incorporating Ag and Cu into ZrO2 changed the structure of crystalline ZrO2, and the nanostructures of the resulting ZrO2–Ag and ZrO2–Cu coatings were found to be correlated with the antibacterial performance. The adherence of S. aureus and A. actinomycetemcomitans was less for ZrO2 samples with a small doping of Cu than for uncoated Ti. The ZrO2–Ag coating with an Ag content of 10.6at.%, which showed hydrophobicity, exhibited the lowest bacterial retention and viability of S. aureus and A. actinomycetemcomitans. The results suggest that ZrO2–Ag and ZrO2–Cu coatings improve the antibacterial performance relative to pure-Ti implant materials. [Copyright &y& Elsevier]

Abstract: Titanium-based materials have been used for dental implants due to their excellent biological compatibility, superior mechanical strength and high corrosion resistance. The osseointegration of titanium dental implants is related to their composition and surface treatment. A better anti-bacterial performance of the abutment seated in the prosthetic crown is beneficial for the osseointegration and for avoiding the infection after implantation surgery. In this study, TaN-Ag coatings with different Ag contents were deposited on a bio-grade pure Ti dental implant material. A twin-gun magnetron sputtering system was used for the deposition of TaN-Ag coatings. The Ag content in the deposited coatings was controlled by the magnetron power ratio of Ag/(Ta+Ag) targets. To verify the susceptibility of implant surface to bacterial adhesion, Staphylococcus aureus, one of the major pathogen frequently found in the implant-associated infections, was chosen for in vitro anti-bacterial analyses. In addition, the biocompatibility of human gingival fibroblast (HGF) cells on coatings was also evaluated. A composite structure of crystalline TaN and Ag nanoparticles was identified. The TaN-Ag coating with the highest Ag content of 21.4at.% possessed the lowest bacterial retention and viability of S. aureus. From the MTT assay test, the mean optical density values for the TaN and TaN-Ag coated samples after 72h of HGF adhesion were greater than the value obtained from the uncoated Ti. The results suggested that the TaN-Ag coatings improve antibacterial performance with compatible biological response. [ABSTRACT FROM AUTHOR]

Pure titanium (Ti) and titanium alloys are widely used as artificial implant materials for biomedical applications. The excellent biocompatibility of Ti has been attributed to the presence of a natural or artificial surface layer of titanium dioxide. Zinc oxide and tantalum oxide thin films are recognized due to their outstanding antibacterial properties. In this study, high power impulse magnetron sputtering (HiPIMS) was used for the deposition of tantalum oxide and zinc-doped Ta(Zn)O thin films on Ti with rough and porous surface, which was pretreated by plasma electrolytic oxidation (PEO). Surface morphology, antibacterial property as well as cell biocompatibility were analyzed. The antibacterial effect was studied individually for the Gram-positive and Gram-negative bacteria Staphylococcus aureus (S. aureus) and Actinobacillus actinomycetemcomitans (A. actinomycetemcomitans). The deposited Ta (Zn)O coating was composed of amorphous tantalum oxide and crystalline ZnO. The antibacterial results on the tantalum oxide and Ta(Zn)O coated Ti indicated a significant inhibition of both S. aureus and A. actinomycetemcomitans bacteria when compared with the uncoated Ti samples. The deposited Ta(Zn)O showed the best antibacterial performance. The Ta(Zn)O coated Ti showed lower level of the cell viability in MG-63 cells compared to other groups, indicating that Zn-doped Ta(Zn)O coatings may restrict the cell viability of hard tissue-derived MG-63 cells. However, the biocompatibility tests demonstrated that the tantalum oxide and Ta(Zn)O coatings improved cell attachment and cell growth in human skin fibroblasts. The cytotoxicity was found similar between the Ta2O5 and Ta(Zn)O coated Ti. By adopting a first PEO surface modification and a subsequent HiPIMS coating deposition, we synthetized amorphous tantalum oxide and Ta(Zn)O coatings that improved titanium surface properties and morphologies, making them a good surface treatment for titanium-based implants. [ABSTRACT FROM AUTHOR]

In this study, amorphous tantalum oxide coatings were deposited onto the Ti substrate with and without plasma electrolytic oxidation (PEO)-pretreatment by using a high-powered impulse magnetron sputtering system. The antibacterial tests were conducted using Syto9 fluorescent dyes to study the antibacterial performance of Gram-positive (Staphylococcus aureus) and Gram-negative (Actinobacillus actinomycetemcomitans) bacteria. In vitro studies, the cell cytotoxicity and cell viability were evaluated with soft-tissue derived human skin fibroblasts and hard-tissue derived human osteosarcoma cells. The results of the antibacterial experiments revealed that both the Ta 2 O 5 and PEO-pretreated Ta 2 O 5 samples had superior antibacterial properties compared to the uncoated Ti samples. Cell viability analyses showed that the Ta 2 O 5 films with and without PEO pretreatment exhibited better cell growth compared to the Ti specimens in human skin fibroblasts and human osteosarcoma cells. The cell viability of PEO-pretreated Ta 2 O 5 films even two-fold higher than the Ti specimens in human osteosarcoma cells. In addition, no cytotoxicity was detected in both the Ta 2 O 5 and PEO-pretreated Ta 2 O 5 films. It concluded that porous Ta 2 O 5 film pretreated with PEO procedure possessed both great biocompatibility and antibacterial abilities. It might have highly potential to be a candidate for the surface materials of dental or orthopedic implants. • Amorphous Ta 2 O 5 are deposited by high-powered impulse magnetron sputtering. • The plasma electrolytic oxidation-pretreated Ta 2 O 5 has the highest hydrophilicity. • The Ta 2 O 5 coatings showed good antibacterial properties. • The cell viability of human skin fibroblasts is the highest for the Ta 2 O 5 coatings. • The MG-63 cell viability is the highest for the porous PEO-pretreated Ta 2 O 5 coatings. [ABSTRACT FROM AUTHOR]

Abstract: Titanium (Ti)-based materials have been used for dental/orthopedic implants due to their excellent biological compatibility, superior mechanical strength and high corrosion resistance. The osseointegration of Ti implants is related to their composition and surface treatment. Better biocompatibility and anti-bacterial performances of Ti implant are beneficial for the osseointegration and for avoiding the infection after implantation surgery. In this study, nanocomposite ZrCN/amorphous carbon (a-C) coatings with different carbon contents were deposited on a bio-grade pure Ti implant material. A cathodic-arc evaporation system with plasma enhanced duct equipment was used for the deposition of ZrCN/a-C coatings. Reactive gas (N2) and C2H2 activated by the zirconium plasma in the evaporation process were used to deposit the ZrCN/a-C coatings. To verify the susceptibility of implant surface to bacterial adhesion, Actinobacillus actinomycetemcomitans (A. actinomycetemcomitans), one of the major pathogen frequently found in the dental implant-associated infections, was chosen for in vitro anti-bacterial analyses. In addition, the biocompatibility of human gingival fibroblast (HGF) cells on coatings was also evaluated by a cell proliferation assay. The results suggested that the ZrCN/a-C coatings with carbon content higher than 12.7at.% can improve antibacterial performance with excellent HGF cell compatibility as well. [Copyright &y& Elsevier]