Search

Micro-sized silicon anodes can significantly increase the energy density of lithium-ion batteries with low cost. However, the large silicon volume changes during cycling cause cracks for both organic-inorganic interphases and silicon particles. The liquid electrolytes further penetrate the cracked silicon particles and reform the interphases, resulting in huge electrode swelling and quick capacity decay. Here we resolve these challenges by designing a high-voltage electrolyte that forms silicon-phobic interphases with weak bonding to lithium-silicon alloys. The designed electrolyte enables micro-sized silicon anodes (5 µm, 4.1 mAh cm−2) to achieve a Coulombic efficiency of 99.8% and capacity of 2175 mAh g−1 for >250 cycles and enable 100 mAh LiNi0.8Co0.15Al0.05O2 pouch full cells to deliver a high capacity of 172 mAh g−1 for 120 cycles with Coulombic efficiency of >99.9%. The high-voltage electrolytes that are capable of forming silicon-phobic interphases pave new ways for the commercialization of lithium-ion batteries using micro-sized silicon anodes. Micro-sized silicon are promising anode materials due to low-cost and high-energy, yet their application is hindered by inaccessible electrolytes. Here, the authors report sulfolane-based electrolytes that form silicon-phobic interphases and enable high-voltage pouch cells to achieve superior cycle life. [ABSTRACT FROM AUTHOR]

A new super-concentrated aqueous electrolyte is proposed by introducing a second lithium salt. The resultant ultra-high concentration of 28 m led to more effective formation of a protective interphase on the anode along with further suppression of water activities at both anode and cathode surfaces. The improved electrochemical stability allows the use of TiO2 as the anode material, and a 2.5 V aqueous Li-ion cell based on LiMn2O4 and carbon-coated TiO2 delivered the unprecedented energy density of 100 Wh kg−1 for rechargeable aqueous Li-ion cells, along with excellent cycling stability and high coulombic efficiency. It has been demonstrated that the introduction of a second salts into the 'water-in-salt' electrolyte further pushed the energy densities of aqueous Li-ion cells closer to those of the state-of-the-art Li-ion batteries. [ABSTRACT FROM AUTHOR]

Lithium-ion capacitors, as a hybrid electrochemical energy storage device, realize high specific energy and power density within one device, thus attracting extensive attention. Here, hierarchically porous Li 3 VO 4 /C nanocomposite is prepared by a solvo-thermal reaction, followed with a post-annealing process. This composite has macropores at the center and mesopores in the wall, thus effectively promoting electrolyte penetration and structure stability upon cycling simultaneously. Compared to mesoporous Li 3 VO 4 , the enhanced rate capability and specific capacity of hierarchically porous Li 3 VO 4 /C indicate the synergistic effect of mesopores and macropores. Inspired by these results, this composite is coupled with mesoporous carbon (CMK-3) for lithium-ion capacitors, generating a specific energy density of 105 Wh kg −1 at a power density of 188 W kg −1 . Even if the power density increases to 9.3 kW kg −1 , the energy density still remains 62 Wh kg −1 . All these results demonstrate the promising potential of hierarchically porous Li 3 VO 4 in lithium ion capacitors. [ABSTRACT FROM AUTHOR]