Search

This article investigates subject-related research metrics from the most popular scientometrics platforms with the capability of citation count. Quantitative analyses have been carried out to determine the most- to the least-cited subject areas to indicate the most active and dynamic fields in research. Subject areas are classified based on statistical analyses and the number of citations received in the period of search. Numerous articles were analyzed from top-ranked journals in all research fields covered by SCImago journal classification. A comprehensive data set was generated in 27 research subject areas, including 313 subject categories and 81 high-ranked journals. Results showed that the highest number of citations were related to the sciences and science-related subject areas. The subject areas of computer science and mathematics had the lowest research metrics and the smallest number of highly cited publications. Web of Science performed better than Scopus for subject-related evaluations. Analysis of frequency data showed that Google Scholar cited fewer papers for low-cited publications than did Scopus or Web of Science. For highly cited publications, however, Google Scholar was found to have better performance. Web of Science showed the best consistency in citation coverage in most of the investigated subject areas. [ABSTRACT FROM AUTHOR]

To solve the problem of the deadline-constrained task scheduling in the cloud computing system, this paper proposes a deadline-constrained scheduling algorithm for cloud computing based on the driver of dynamic essential path (Deadline-DDEP). According to the changes of the dynamic essential path of each task node in the scheduling process, the dynamic sub-deadline strategy is proposed. The strategy assigns different sub-deadline values to every task node to meet the constraint relations among task nodes and the user’s defined deadline. The strategy fully considers the dynamic sub-deadline affected by the dynamic essential path of task node in the scheduling process. The paper proposed the quality assessment of optimization cost strategy to solve the problem of selecting server for each task node. Based on the sub-deadline urgency and the relative execution cost in the scheduling process, the strategy selects the server that not only meets the sub-deadline but also obtains much lower execution cost. In this way, the proposed algorithm will make the task graph complete within its deadline, and minimize its total execution cost. Finally, we demonstrate the proposed algorithm via the simulation experiments using Matlab tools. The experimental results show that, the proposed algorithm produces remarkable performance improvement rate on the total execution cost that ranges between 10.3% and 30.8% under meeting the deadline constraint. In view of the experimental results, the proposed algorithm provides better-quality scheduling solution that is suitable for scientific application task execution in the cloud computing environment than IC-PCP, DCCP and CD-PCP. [ABSTRACT FROM AUTHOR]

Recently, computational Grids have proven to be a good solution for processing large-scale, computation intensive problems. However, the heterogeneity, dynamics of resources and diversity of applications requirements have always been important factors affecting their performance. In response to these challenges, this work first builds a Grid job scheduling architecture that can dynamically monitor Grid computing center resources and make corresponding scheduling decisions. Second, a Grid job model is proposed to describe the application requirements. Third, this paper studies the characteristics of commercial interconnection networks used in Grids and forecast job transmission time. Fourth, this paper proposes an application-aware job scheduling mechanism (AJSM) that includes periodic scheduling flow and a heuristic application-aware deadline constraint job scheduling algorithm. The rigorous performance evaluation results clearly demonstrate that the proposed application-aware job scheduling mechanism can successful schedule more Grid jobs than the existing algorithms. For successful scheduled jobs, our proposed AJSM method is the best algorithm for job average processing time and makespan. [ABSTRACT FROM AUTHOR]

Analyzing and predicting the trend of price fluctuation has been receiving more and more attention, as price risk has become the focus of risk control research in heating oil futures market. A novel time series prediction model combined with the complex network method is put forward in the paper. First of all, this paper counts the cumulative time interval of different nodes in the network, and fits its growth trend with the Fourier model. Then a novel price fluctuation prediction model is established based on the effective information such as some topology properties extracted from the network. The results show that the Fourier model can predict the emergence time of new nodes in the next stage, and the established price fluctuation prediction model can infer the names of nodes in the prediction interval, so as to determine the forward-looking behavior of price evolution. Besides, liken to the NAR neural network, the prediction results obtained by the proposed method also show superiority, which has important theoretical value and academic significance for early warning and prediction of price behavior in the heating oil futures market. [ABSTRACT FROM AUTHOR]

With rapid economic growth since the 21st century, cities in China have experienced considerable economic and social reconstruction. Driven by rapid industrialization, urban spatial structures are undergoing evolution and change. Therefore, this paper analyzes the processes and mechanisms associated with the evolution of the commercial spatial structure in Guangzhou after the financial crisis in 2008 based on both theoretical and empirical analyses. We use a Dirichlet multinomial regression (DMR) model to extract latent semantic information and determine urban functional areas from global positioning system (GPS) and point-of-interest (POI) data collected in Guangzhou in 2009 and 2013. In addition, we use movement patterns and POI data to identify the evolution of Guangzhou's commercial zones from 2009 to 2013. The results show that the urban commercial structure in Guangzhou gradually changed from a single-center model to a multi-center model with dispersed clusters and that the distribution of the entire spatial structure changed. Meanwhile, Guangzhou’s commercial structure not only varied over time but also exhibited specific geographical features. This paper demonstrates that the proposed method can clearly identify the boundary of the commercial area in Guangzhou and provides a valid spatial-temporal model of change in the city. Moreover, this study not only expounds the future development trends of the urban spatial structure in Guangzhou from a microcosmic perspective but also provides a scientific basis for clarifying the spatial locations and development advantages of urban functions within the city. [ABSTRACT FROM AUTHOR]

In this paper we introduce a novel algorithm, called Exogenous Fitness, to calculate the Fitness of subnational entities and we apply it to the states of Brazil. In the last decade, several indices were introduced to measure the competitiveness of countries by looking at the complexity of their export basket. Tacchella et al (2012) developed a non-monetary metric called Fitness. In this paper, after an overview about Brazil as a whole and the comparison with the other BRIC countries, we introduce a new methodology based on the Fitness algorithm, called Exogenous Fitness. Combining the results with the Gross Domestic Product per capita (GDPp), we look at the dynamics of the Brazilian states in the Fitness-Income plane. Two regimes are distinguishable: one with high predictability and the other with low predictability, showing a deep analogy with the heterogeneous dynamics of the World countries. Furthermore, we compare the ranking of the Brazilian states according to the Exogenous Fitness with the ranking obtained through two other techniques, namely Endogenous Fitness and Economic Complexity Index. [ABSTRACT FROM AUTHOR]

Recommender systems are vulnerable to shilling attacks. Forged user-generated content data, such as user ratings and reviews, are used by attackers to manipulate recommendation rankings. Shilling attack detection in recommender systems is of great significance to maintain the fairness and sustainability of recommender systems. The current studies have problems in terms of the poor universality of algorithms, difficulty in selection of user profile attributes, and lack of an optimization mechanism. In this paper, a shilling behaviour detection structure based on abnormal group user findings and rating time series analysis is proposed. This paper adds to the current understanding in the field by studying the credibility evaluation model in-depth based on the rating prediction model to derive proximity-based predictions. A method for detecting suspicious ratings based on suspicious time windows and target item analysis is proposed. Suspicious rating time segments are determined by constructing a time series, and data streams of the rating items are examined and suspicious rating segments are checked. To analyse features of shilling attacks by a group user’s credibility, an abnormal group user discovery method based on time series and time window is proposed. Standard testing datasets are used to verify the effect of the proposed method. [ABSTRACT FROM AUTHOR]

Many important applications continuously generate data, such as financial transaction administration, satellite monitoring, network flow monitoring, and web information processing. The data mining results are always evolving with the newly generated data. Obviously, for the clustering task, it is better to incrementally update the new clustering results based on the old data rather than to recluster all of the data from scratch. The incremental clustering approach is an essential way to solve the problem of clustering with growing Big Data. This paper proposes a boundary-profile-based incremental clustering (BPIC) method to find arbitrarily shaped clusters with dynamically growing datasets. This method represents the existing clustering results with a collection of boundary profiles and discards the inner points of clusters rather than keep all data. It greatly saves both time and space storage costs. To identify the boundary profile, this paper presents a boundary-vector-based boundary point detection (BV-BPD) algorithm that summarizes the structure of the existing clusters. The BPIC method processes each new point in an online fashion and updates the clustering results in a batch mode. When a new point arrives, the BPIC method either immediately labels it or temporarily puts it into a bucket according to the relationship between the new data and the boundary profiles. A bucket is employed to distinguish the noise from the potential seeds of new clusters and alleviate the effects of data order. When the bucket is full, the BPIC method will cluster the data within it and update the clustering results. Thus, the BPIC method is insensitive to noise and the order of new data, which is critical for the robustness of the incremental clustering process. In the experiments, the performance of the boundary point detection algorithm BV-BPD is compared with the state-of-the-art method. The results show that the BV-BPD is better than the state-of-the-art method. Additionally, the performance of BPIC and other two incremental clustering methods are investigated in terms of clustering quality, time and space efficiency. The experimental results indicate that the BPIC method is able to get a qualified clustering result on a large dataset with higher time and space efficiency. [ABSTRACT FROM AUTHOR]

In this paper, we propose a hybrid method to forecast the stock prices called High-order-fuzzy-fluctuation-Trends-based Back Propagation(HTBP)Neural Network model. First, we compare each value of the historical training data with the previous day's value to obtain a fluctuation trend time series (FTTS). On this basis, the FTTS blur into fuzzy time series (FFTS) based on the fluctuation of the increasing, equality, decreasing amplitude and direction. Since the relationship between FFTS and future wave trends is nonlinear, the HTBP neural network algorithm is used to find the mapping rules in the form of self-learning. Finally, the results of the algorithm output are used to predict future fluctuations. The proposed model provides some innovative features:(1)It combines fuzzy set theory and neural network algorithm to avoid overfitting problems existed in traditional models. (2)BP neural network algorithm can intelligently explore the internal rules of the actual existence of sequential data, without the need to analyze the influence factors of specific rules and the path of action. (3)The hybrid modal can reasonably remove noises from the internal rules by proper fuzzy treatment. This paper takes the TAIEX data set of Taiwan stock exchange as an example, and compares and analyzes the prediction performance of the model. The experimental results show that this method can predict the stock market in a very simple way. At the same time, we use this method to predict the Shanghai stock exchange composite index, and further verify the effectiveness and universality of the method. [ABSTRACT FROM AUTHOR]

This paper aims to optimize a desirable fare structure for the public transit service along a bus-subway corridor with the consideration of those factors related to equity in trip, including travel distance and comfort level. The travel distance factor is represented by the distance-based fare strategy, which is an existing differential strategy. The comfort level one is considered in the area-based fare strategy which is a new differential strategy defined in this paper. Both factors are referred to by the combined fare strategy which is composed of distance-based and area-based fare strategies. The flat fare strategy is applied to determine a reference level of social welfare and obtain the general passenger flow along transit lines, which is used to divide areas or zones along the corridor. This problem is formulated as a bi-level program, of which the upper level maximizes the social welfare and the lower level capturing traveler choice behavior is a variable-demand stochastic user equilibrium assignment model. A genetic algorithm is applied to solve the bi-level program while the method of successive averages is adopted to solve the lower-level model. A series of numerical experiments are carried out to illustrate the performance of the models and solution methods. Numerical results indicate that all three differential fare strategies play a better role in enhancing the social welfare than the flat fare strategy and that the fare structure under the combined fare strategy generates the highest social welfare and the largest resulting passenger demand, which implies that the more equity factors a differential fare strategy involves the more desirable fare structure the strategy has. [ABSTRACT FROM AUTHOR]

A Mesh topology is one of the most promising architecture due to its regular and simple structure for on-chip communication. Performance of mesh topology degraded greatly by increasing the network size due to small bisection width and large network diameter. In order to overcome this limitation, many researchers presented modified Mesh design by adding some extra links to improve its performance in terms of network latency and power consumption. The Cross-By-Pass-Mesh was presented by us as an improved version of Mesh topology by intelligent addition of extra links. This paper presents an efficient topology named Cross-By-Pass-Torus for further increase in the performance of the Cross-By-Pass-Mesh topology. The proposed design merges the best features of the Cross-By-Pass-Mesh and Torus, to reduce the network diameter, minimize the average number of hops between nodes, increase the bisection width and to enhance the overall performance of the network. In this paper, the architectural design of the topology is presented and analyzed against similar kind of 2D topologies in terms of average latency, throughput and power consumption. In order to certify the actual behavior of proposed topology, the synthetic traffic trace and five different real embedded application workloads are applied to the proposed as well as other competitor network topologies. The simulation results indicate that Cross-By-Pass-Torus is an efficient candidate among its predecessor’s and competitor topologies due to its less average latency and increased throughput at a slight cost in network power and energy for on-chip communication. [ABSTRACT FROM AUTHOR]

As the location trajectory contains more spatial-temporal information about the user, it will be even dangerous for jeopardizing the privacy of the user. In order to cope with the correlation, an algorithm that utilizes the query division had been proposed. In this algorithm, random blocks of query context was used, so as the adversary was obfuscated and difficult to correlate the real result. However, this algorithm fails to dispose the size of each query block, as once same size blocks were obtained by the adversary continuously, so the adversary can regard them as blocks from the same query context, and then obtains the query context to correlate the discrete locations. In view of above conditions, in this paper we propose a fine granularity block division algorithm based on the conception of granularity measurement as well as granularity layer division, so with the help of collaborative users the location privacy of the user will be protected. In this algorithm, the query context will be divided into fine granularity size of information blocks that difficult to be distinguished with others, and then these blocks will be exchanged with other collaborative users to eliminate the difference in block size. In addition, as each block is divided into fine granularity size, the adversary will be difficult to correlate the discrete locations into location trajectory, so the location privacy will be protected. At last, through security analysis and experimental verification, this granularity indistinguishable algorithm is analyzed and verified at both theoretical and practical levels, which further demonstrate the superiority of the proposed algorithm compared with other similar algorithms. [ABSTRACT FROM AUTHOR]

In this paper, we explore the (in)efficiency of the continuum Bitcoin-USD market in the period ranging from mid 2010 to early 2019. To deal with, we dynamically analyse the evolution of the self-similarity exponent of Bitcoin-USD daily returns via accurate FD4 approach by a 512 day sliding window with overlapping data. Further, we define the memory indicator by the difference between the self-similarity exponent of Bitcoin-USD series and the self-similarity index of its shuffled series. We also carry out additional analyses via FD4 approach by sliding windows of sizes equal to 64, 128, 256, and 1024 days, and also via FD algorithm for values of q equal to 1 and 2 (and sliding windows equal to 512 days). Moreover, we explored the evolution of the self-similarity exponent of actual S&P500 series via FD4 algorithm by sliding windows of sizes equal to 256 and 512 days. In all the cases, the obtained results were found to be similar to our first analysis. We conclude that the self-similarity exponent of the BTC-USD (resp., S&P500) series stands above 0.5. However, this is not due to the presence of significant memory in the series but to its underlying distribution. In fact, it holds that the self-similarity exponent of BTC-USD (resp., S&P500) series is similar or lower than the self-similarity index of a random series with the same distribution. As such, several periods with significant antipersistent memory in BTC-USD (resp., S&P500) series are distinguished. [ABSTRACT FROM AUTHOR]

The unrivaled computing capabilities of modern GPUs meet the demand of processing massive amounts of data seen in many application domains. While traditional HPC systems support applications as standalone entities that occupy entire GPUs, there are GPU-based DBMSs where multiple tasks are meant to be run at the same time in the same device. To that end, system-level resource management mechanisms are needed to fully unleash the computing power of GPUs in large data processing, and there were some researches focusing on it. In our previous work, we explored the single compute-bound kernel modeling on GPUs under NVidia’s CUDA framework and provided an in-depth anatomy of the NVidia’s concurrent kernel execution mechanism (CUDA stream). This paper focuses on resource allocation of multiple GPU applications towards optimization of system throughput in the context of systems. Comparing to earlier studies of enabling concurrent tasks support on GPU such as MultiQx-GPU, we use a different approach that is to control the launching parameters of multiple GPU kernels as provided by compile-time performance modeling as a kernel-level optimization and also a more general pre-processing model with batch-level control to enhance performance. Specifically, we construct a variation of multi-dimensional knapsack model to maximize concurrency in a multi-kernel environment. We present an in-depth analysis of our model and develop an algorithm based on dynamic programming technique to solve the model. We prove the algorithm can find optimal solutions (in terms of thread concurrency) to the problem and bears pseudopolynomial complexity on both time and space. Such results are verified by extensive experiments running on our microbenchmark that consists of real-world GPU queries. Furthermore, solutions identified by our method also significantly reduce the total running time of the workload, as compared to sequential and MultiQx-GPU executions. [ABSTRACT FROM AUTHOR]

A new Interpolation based Reversible Data Hiding (IRDH) scheme is reported in this paper. For different applications of an IRDH scheme to the digital image, video, multimedia, big-data and biological data, the embedding capacity requirement usually varies. Disregarding this important consideration, existing IRDH schemes do not offer a better embedding rate-distortion performance for varying size payloads. To attain this varying capacity requirement with our proposed adaptive embedding, we formulate a capacity control parameter and propose to utilize it to determine a minimum set of embeddable bits in a pixel. Additionally, we use a logical (or bit-wise) correlation between the embeddable pixel and estimated versions of an embedded pixel. Thereby, while a higher range between an upper and lower limit of the embedding capacity is maintained, a given capacity requirement within that limit is also attained with a better-embedded image quality. Computational modeling of all new processes of the scheme is presented, and performance of the scheme is evaluated with a set of popular test-images. Experimental results of our proposed scheme compared to the prominent IRDH schemes have recorded a significantly better-embedding rate-distortion performance. [ABSTRACT FROM AUTHOR]

In this paper, we propose a spatial lag panel smoothing transition regression (SLPSTR) model ty considering spatial correlation of dependent variable in panel smooth transition regression model. This model combines advantages of both smooth transition model and spatial econometric model and can be used to deal with panel data with wide range of heterogeneity and cross-section correlation simultaneously. We also propose a Bayesian estimation approach in which the Metropolis-Hastings algorithm and the method of Gibbs are used for sampling design for SLPSTR model. A simulation study and a real data study are conducted to investigate the performance of the proposed model and the Bayesian estimation approach in practice. The results indicate that our theoretical method is applicable to spatial data with a wide range of spatial structures under finite sample. [ABSTRACT FROM AUTHOR]

The objective of this paper is to propose a lot-sizing methodology for an inventory system that faces time-dependent random demands and that seeks to minimize total cost as a function of order, purchase, holding and shortage costs. A two-stage stochastic programming framework is derived to optimize lot-sizing decisions over a time horizon. To this end, we simulate a demand time-series by using a generalized autoregressive moving average structure. The modeling includes covariates of the demand, which are used as predictors of this. We describe an algorithm that summarizes the methodology and we discuss its computational framework. A case study with unpublished real-world data is presented to illustrate the potential of this methodology. We report that the accuracy of the demand variance estimator improves when a temporal structure is considered, instead of assuming time-independent demand. The methodology is useful in decisions related to inventory logistics management when the demand shows patterns of temporal dependence. [ABSTRACT FROM AUTHOR]

In general, the stock prices of the same industry have a similar trend, but those of different industries do not. When investing in stocks of different industries, one should select the optimal model from lots of trading models for each industry because any model may not be suitable for capturing the stock trends of all industries. However, the study has not been carried out at present. In this paper, firstly we select 424 S&P 500 index component stocks (SPICS) and 185 CSI 300 index component stocks (CSICS) as the research objects from 2010 to 2017, divide them into 9 industries such as finance and energy respectively. Secondly, we apply 12 widely used machine learning algorithms to generate stock trading signals in different industries and execute the back-testing based on the trading signals. Thirdly, we use a non-parametric statistical test to evaluate whether there are significant differences among the trading performance evaluation indicators (PEI) of different models in the same industry. Finally, we propose a series of rules to select the optimal models for stock investment of every industry. The analytical results on SPICS and CSICS show that we can find the optimal trading models for each industry based on the statistical tests and the rules. Most importantly, the PEI of the best algorithms can be significantly better than that of the benchmark index and “Buy and Hold” strategy. Therefore, the algorithms can be used for making profits from industry stock trading. [ABSTRACT FROM AUTHOR]

To flexibly meet users’ demands in cloud computing, it is essential for providers to establish the efficient virtual mapping in datacenters. Accordingly, virtualization has become a key aspect of cloud computing. It is possible to consolidate resources based on the single objective of reducing energy consumption. However, it is challenging for the provider to consolidate resources efficiently based on a multiobjective optimization strategy. In this paper, we present a novel migration algorithm to consolidate resources adaptively using a two-level scheduling algorithm. First, we propose the grey relational analysis (GRA) and technique for order preference by similarity to the ideal solution (TOPSIS) policy to simultaneously determine the hotspots by the main selected factors, including the CPU and the memory. Second, a two-level hybrid heuristic algorithm is designed to consolidate resources in order to reduce costs and energy consumption, mainly depending on the PSO and ACO algorithms. The improved PSO can determine the migrating VMs quickly, and the proposed ACO can locate the positions. Extensive experiments demonstrate that the two-level scheduling algorithm performs the consolidation strategy efficiently during the dynamic allocation process. [ABSTRACT FROM AUTHOR]

Many different time-series methods have been widely used in forecast stock prices for earning a profit. However, there are still some problems in the previous time series models. To overcome the problems, this paper proposes a hybrid time-series model based on a feature selection method for forecasting the leading industry stock prices. In the proposed model, stepwise regression is first adopted, and multivariate adaptive regression splines and kernel ridge regression are then used to select the key features. Second, this study constructs the forecasting model by a genetic algorithm to optimize the parameters of support vector regression. To evaluate the forecasting performance of the proposed models, this study collects five leading enterprise datasets in different industries from 2003 to 2012. The collected stock prices are employed to verify the proposed model under accuracy. The results show that proposed model is better accuracy than the other listed models, and provide persuasive investment guidance to investors. [ABSTRACT FROM AUTHOR]

Coordination is essential for improving supply chain performance, and one of the most critical factors in achieving the coordination of a supply chain is the integrated research of production and distribution. In this paper, a novel two-stage hybrid solution methodology is proposed. In the first stage, products are processed on the serial machines of multiple manufacturers located in two industrial parks. A fuzzy multi-objective scheduling optimization is performed using a modified non-dominated sorting genetic algorithm II (NSGA-II). The result obtained in the first stage is used in the second stage to optimize the distribution scheduling problem using a modified genetic annealing algorithm (GAA). Finally, simulation results verify both the feasibility and efficiency of the proposed solution methodology. [ABSTRACT FROM AUTHOR]

The clustering of time series has attracted growing research interest in recent years. The most popular clustering methods assume that the time series are only linearly dependent but this assumption usually fails in practice. To overcome this limitation, in this paper, we study clustering methods applicable to time series with a general and dependent structure. We propose a copula-based distance to measure dissimilarity among time series and consider an estimator for it, where the strong consistency of the estimator is guaranteed. Once the pairwise distance matrix for time series has been obtained, we apply a hierarchical clustering algorithm to cluster the time series and ensure its consistency. Numerical studies, including a large number of simulations and analysis of practical data, show that our method performs well. [ABSTRACT FROM AUTHOR]

Distribution centers (DCs) are an important part of the modern logistics system. The selection of a location for a DC is significant for saving costs and reducing externalities caused by distribution. In this paper, we propose a new hybrid method based on the analytic hierarchy process (AHP) and 2-tuple hybrid ordered weighted averaging (THOWA) to select the location of a DC in a megacity. First, we propose a new set of evaluation criteria integrating economic, political, social and ecological information based on the characteristics of Chinese megacities. Second, subjective criteria weights are calculated by AHP combining the evaluation of logistics experts. Third, experts from academia, enterprise and government assess the performance of alternatives. In addition, the overall evaluation values are aggregated by an improved THOWA operator to rank the alternatives. Finally, we conduct a sensitivity analysis to investigate the influence of criteria weights on the decision-making process. The proposed method is novel and addresses the uncertainty under limited quantitative information, which has the advantages of avoiding information loss and distortion problems in the integrating process and operating linguistic evaluation information effectively. The proposed method can be practically applied by municipal planning departments in deciding on the location of new DCs. A numerical application of the proposed method is provided. [ABSTRACT FROM AUTHOR]

Predicting the population-level effects of an infectious disease intervention that incorporate multiple modes of intervention is complicated by the joint non-linear dynamics of both infection transmission and the intervention itself. In this paper, we consider the sensitivity of Dynamic Optimal Control Profiles (DOCPs) for the optimal joint investment in both a contagiousness and susceptibility-based control of HIV to bio-behavioral, economic, and programmatic assumptions. The DOCP is calculated using recently developed numerical algorithms that allow controls to be represented by a set of piecewise constant functions that maintain a constant yearly budget. Our transmission model assumes multiple stages of HIV infection corresponding to acute and chronic infection and both within- and between-individual behavioral heterogeneity. We parameterize a baseline scenario from a longitudinal study of sexual behavior in MSM and consider sensitivity of the DOCPs to deviations from that baseline scenario. In the baseline scenario, the primary determinant of the dominant control were programmatic factors, regardless of budget. In sensitivity analyses, the qualitative aspects of the optimal control policy were often robust to significant deviation in assumptions regarding transmission dynamics. In addition, we found several conditions in which long-term joint investment in both interventions was optimal. Our results suggest that modeling in the service of decision support for intervention design can improve population-level effects of a limited set of economic resources. We found that economic and programmatic factors were as important as the inherent transmission dynamics in determining population-level intervention effects. Given our finding that the DOCPs were robust to alternative biological and behavioral assumptions it may be possible to identify DOCPs even when the data are not sufficient to identify a transmission model. [ABSTRACT FROM AUTHOR]

New rapid diagnostic tests (RDTs) for screening human African trypanosomiasis (HAT) have been introduced as alternatives to the card agglutination test for trypanosomiasis (CATT). One brand of RDT, the SD BIOLINE HAT RDT has been shown to have lower specificity but higher sensitivity than CATT, so to make a rational choice between screening strategies, a cost-effectiveness analysis is a key element. In this paper we estimate the relative cost-effectiveness of CATT and the RDT when implemented in the Democratic Republic of the Congo (DRC). Data on the epidemiological parameters and costs were collected as part of a larger study. These data were used to model three different diagnostic algorithms in mobile teams and fixed health facilities, and the relative cost-effectiveness was measured as the average cost per case diagnosed. In both fixed facilities and mobile teams, screening of participants using the SD BIOLINE HAT RDT followed by parasitological confirmation had a lower cost-effectiveness ratio than in algorithms using CATT. Algorithms using the RDT were cheaper by 112.54 (33.2%) and 88.54 (32.92%) US dollars per case diagnosed in mobile teams and fixed health facilities respectively, when compared with algorithms using CATT. Sensitivity analysis demonstrated that these conclusions were robust to a number of assumptions, and that the results can be scaled to smaller or larger facilities, and a range of prevalences. The RDT was the most cost-effective screening test in all realistic scenarios and detected more cases than CATT. Thus, on this basis, the SD BIOLINE HAT RDT could be considered as the most cost-effective option for use in routine screening for HAT in the DRC. [ABSTRACT FROM AUTHOR]

In this paper we propose a criterion to balance the processing time and the solution quality of k-means cluster algorithms when applied to instances where the number n of objects is big. The majority of the known strategies aimed to improve the performance of k-means algorithms are related to the initialization or classification steps. In contrast, our criterion applies in the convergence step, namely, the process stops whenever the number of objects that change their assigned cluster at any iteration is lower than a given threshold. Through computer experimentation with synthetic and real instances, we found that a threshold close to 0.03n involves a decrease in computing time of about a factor 4/100, yielding solutions whose quality reduces by less than two percent. These findings naturally suggest the usefulness of our criterion in Big Data realms. [ABSTRACT FROM AUTHOR]

Background: The impact of cutaneous leishmaniasis (CL) on the quality of life of patients has been neglected in research studies worldwide. The few reported studies have used non-specific questionnaires for the disease, which represents a limitation since generic instruments may not address specific aspects of the disease, compromising the evaluation of its real impact. The aim of this paper is to describe the development and the initial validation of an instrument for evaluating the impact of CL, named the Cutaneous Leishmaniasis Impact Questionnaire. Methodology: The formulation and validation of the instrument consisted of the following steps: (1) literature review; (2) conceptual framework construction and initial item generation; (3) tool analysis by health professionals (experts); (4) tool evaluation performed by the patients; and (5) a pilot study with 100 patients with localized CL, evaluated at a reference ambulatory facility in Belo Horizonte, in the state of Minas Gerais, Brazil. The structure of the proposed instrument was analyzed using hierarchical cluster analysis (ICLUST). Results: Twenty-seven items were initially proposed by the researchers to compose the questionnaire. Content validity (evaluates if the instrument fully assesses the construct of interest) was evaluated by the panel of experts, while face validity (evaluates how potential participants interpret the items) was evaluated by the target population. In this step, some items were excluded, reformulated and/or included. After evaluating a factorial structure of the items in accordance with the cluster analysis, we assembled a questionnaire with 25 items (alpha = 0.86), with high reliability and homogeneity, which address the following: 1) the general impact of the disease (alpha = 0.91, beta = 0.67) and 2) the evaluation of the perception about the treatment and health services (alpha = 0.72, beta = 0.51). Conclusions: The Cutaneous Leishmaniasis Impact Questionnaire, developed with contributions from patients and experts, was confirmed, in this first validation, as a useful and reliable instrument. [ABSTRACT FROM AUTHOR]

The problem that passengers are hard to take taxis while empty driving rate is high widely exists under the traditional taxi operation mode. The implementation of taxi carpooling mode can alleviate the problem in a certain extent. The objective of this study is to optimize the taxi carpooling path. Firstly, the taxi carpooling path optimization model with single objective and its extended model with multiple objectives are built respectively. Then, the single objective path optimization model of taxi carpooling is solved based on the improved single objective genetic algorithm, and the multiple-objective path optimization model of taxi carpooling is solved based on the improved multiple-objective genetic algorithm. Finally, a case study is carried out based on a road network with 24 nodes. The case study results show the path optimization models and algorithms of taxi carpooling proposed in the paper can quickly get the taxi carpooling path, and can increase the income of taxi driver while reduce the cost for passengers. [ABSTRACT FROM AUTHOR]

Railway seat inventory control aims to maximize ticket sale profits by determining a selling policy on the reservation horizon. This paper introduces a dynamic bid price approach in railway seat inventory control problem. Multi-dimensional demand is taken into consideration in modeling the problem, in which passenger transfer is our main focus. A new approximate approach is designed to this problem. Numerical examples are presented to evaluate the efficiency of this approach. Simulation experiments are conducted to verify the impact of transfer under different scenarios. [ABSTRACT FROM AUTHOR]

High utility itemset mining has become an important and critical operation in the Data Mining field. High utility itemset mining generates more profitable itemsets and the association among these itemsets, to make business decisions and strategies. Although, high utility is important, it is not the sole measure to decide efficient business strategies such as discount offers. It is very important to consider the pattern of itemsets based on the frequency as well as utility to predict more profitable itemsets. For example, in a supermarket or restaurant, beverages like champagne or wine might generate high utility (profit), but also sell less frequently compared to other beverages like soda or beer. In previous studies, it is observed that people who buy milk, bread, or diapers from a supermarket, also tend to buy beer or soda. But the items like milk, diapers, beer, or soda generate less utility (profit value) compared to beverages like champagne or wine. If we combine items like champagne or wine having high utility but less frequency, with the frequently sold items like milk, diaper, or beer, we can increase the utility of the transaction by providing some discount offers on champagne or wine. In this paper, we are integrating low-frequency itemsets with high-frequency itemsets, both having low or high utility, and provide different association rules for this combination of itemsets. In this way, we can generate a more accurate measure of pattern mining for various business strategies. [ABSTRACT FROM AUTHOR]

This paper addresses the problem of makespan minimization on unrelated parallel machines with sequence dependent setup times. The symbiotic organisms search (SOS) algorithm is a new and popular global optimization technique that has received wide acceptance in recent years from researchers in continuous and discrete optimization domains. An improved SOS algorithm is developed to solve the parallel machine scheduling problem. Since the standard SOS algorithm was originally developed to solve continuous optimization problems, a new solution representation and decoding procedure is designed to make the SOS algorithm suitable for the unrelated parallel machine scheduling problem (UPMSP). Similarly, to enhance the solution quality of the SOS algorithm, an iterated local search strategy based on combining variable numbers of insertion and swap moves is incorporated into the SOS algorithm. More so, to further improve the SOS optimization speed and performance, the longest processing time first (LPT) rule is used to design a machine assignment heuristic that assigns processing machines to jobs based on the machine dynamic load-balancing mechanism. Subsequently, the machine assignment scheme is incorporated into SOS algorithms and used to solve the UPMSP. The performances of the proposed methods are evaluated by comparing their solutions with other existing techniques from the literature. A number of statistical tests were also conducted to determine the variations in performance for each of the techniques. The experimental results showed that the SOS with LPT (SOS-LPT) heuristic has the best performance compared to other tested method, which is closely followed by SOS algorithm, indicating that the two proposed algorithms’ solution approaches are reasonable and effective for solving large-scale UPMSPs. [ABSTRACT FROM AUTHOR]

This paper tries to tackle the modern challenge of practical steganalysis over large data by presenting a novel approach whose aim is to perform with perfect accuracy and in a completely automatic manner. The objective is to detect changes introduced by the steganographic process in those data objects, including signatures related to the tools being used. Our approach achieves this by first extracting reliable regularities by analyzing pairs of modified and unmodified data objects; then, combines these findings by creating general patterns present on data used for training. Finally, we construct a Naive Bayes model that is used to perform classification, and operates on attributes extracted using the aforementioned patterns. This technique has been be applied for different steganographic tools that operate in media files of several types. We are able to replicate or improve on a number or previously published results, but more importantly, we in addition present new steganalytic findings over a number of popular tools that had no previous known attacks. [ABSTRACT FROM AUTHOR]

Micro-blogging systems have become one of the most important ways for information sharing. Network structure and users’ interactions such as forwarding behaviors have aroused considerable research attention, while mention, as a key feature in micro-blogging platforms which can improve the visibility of a message and direct it to a particular user beyond the underlying social structure, is seldom studied in previous works. In this paper, we empirically study the mention effect in information diffusion, using the dataset from a population-scale social media website. We find that users with high number of followers would receive much more mentions than others. We further investigate the effect of mention in information diffusion by examining the response probability with respect to the number of mentions in a message and observe a saturation at around 5 mentions. Furthermore, we find that the response probability is the highest when a reciprocal followship exists between users, and one is more likely to receive a target user’s response if they have similar social status. To illustrate these findings, we propose the response prediction task and formulate it as a binary classification problem. Extensive evaluation demonstrates the effectiveness of discovered factors. Our results have consequences for the understanding of human dynamics on the social network, and potential implications for viral marketing and public opinion monitoring. [ABSTRACT FROM AUTHOR]

The intelligent water drop algorithm is a swarm-based metaheuristic algorithm, inspired by the characteristics of water drops in the river and the environmental changes resulting from the action of the flowing river. Since its appearance as an alternative stochastic optimization method, the algorithm has found applications in solving a wide range of combinatorial and functional optimization problems. This paper presents an improved intelligent water drop algorithm for solving multi-depot vehicle routing problems. A simulated annealing algorithm was introduced into the proposed algorithm as a local search metaheuristic to prevent the intelligent water drop algorithm from getting trapped into local minima and also improve its solution quality. In addition, some of the potential problematic issues associated with using simulated annealing that include high computational runtime and exponential calculation of the probability of acceptance criteria, are investigated. The exponential calculation of the probability of acceptance criteria for the simulated annealing based techniques is computationally expensive. Therefore, in order to maximize the performance of the intelligent water drop algorithm using simulated annealing, a better way of calculating the probability of acceptance criteria is considered. The performance of the proposed hybrid algorithm is evaluated by using 33 standard test problems, with the results obtained compared with the solutions offered by four well-known techniques from the subject literature. Experimental results and statistical tests show that the new method possesses outstanding performance in terms of solution quality and runtime consumed. In addition, the proposed algorithm is suitable for solving large-scale problems. [ABSTRACT FROM AUTHOR]

When standard optimization methods fail to find a satisfactory solution for a parameter fitting problem, a tempting recourse is to adjust parameters manually. While tedious, this approach can be surprisingly powerful in terms of achieving optimal or near-optimal solutions. This paper outlines an optimization algorithm, Adaptive Stochastic Descent (ASD), that has been designed to replicate the essential aspects of manual parameter fitting in an automated way. Specifically, ASD uses simple principles to form probabilistic assumptions about (a) which parameters have the greatest effect on the objective function, and (b) optimal step sizes for each parameter. We show that for a certain class of optimization problems (namely, those with a moderate to large number of scalar parameter dimensions, especially if some dimensions are more important than others), ASD is capable of minimizing the objective function with far fewer function evaluations than classic optimization methods, such as the Nelder-Mead nonlinear simplex, Levenberg-Marquardt gradient descent, simulated annealing, and genetic algorithms. As a case study, we show that ASD outperforms standard algorithms when used to determine how resources should be allocated in order to minimize new HIV infections in Swaziland. [ABSTRACT FROM AUTHOR]

Motion blur appearing in traffic sign images may lead to poor recognition results, and therefore it is of great significance to study how to deblur the images. In this paper, a novel method for deblurring traffic sign is proposed based on exemplars and several related approaches are also made. First, an exemplar dataset construction method is proposed based on multiple-size partition strategy to lower calculation cost of exemplar matching. Second, a matching criterion based on gradient information and entropy correlation coefficient is also proposed to enhance the matching accuracy. Third, L0.5-norm is introduced as the regularization item to maintain the sparsity of blur kernel. Experiments verify the superiority of the proposed approaches and extensive evaluations against state-of-the-art methods demonstrate the effectiveness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Delay Tolerant Network (DTN) multi-copy routing protocols are privileged to create and transmit multiple copies of each message that causes congestion and some messages are dropped. This process is known as reactive drop because messages were dropped re-actively to overcome buffer overflows. The existing reactive buffer management policies apply a single metric to drop source, relay and destine messages. Hereby, selection to drop a message is dubious because each message as source, relay or destine may have consumed dissimilar magnitude of network resources. Similarly, DTN has included time to live (ttl) parameter which defines lifetime of message. Hence, when ttl expires then message is automatically destroyed from relay nodes. However, time-to-live (ttl) is not applicable on messages reached at their destinations. Moreover, nodes keep replicating messages till ttl expires even-though large number of messages has already been dispersed. In this paper, we have proposed Priority Queue Based Reactive Buffer Management Policy (PQB-R) for DTN under City Based Environments. The PQB-R classifies buffered messages into source, relay and destine queues. Moreover, separate drop metric has been applied on individual queue. The experiment results prove that proposed PQB-R has reduced number of messages transmissions, message drop and increases delivery ratio. [ABSTRACT FROM AUTHOR]

Security is considered a major challenge for self-driving and semi self-driving vehicles. These vehicles depend heavily on communications to predict and sense their external environment used in their motion. They use a type of ad hoc network termed Vehicular ad hoc networks (VANETs). Unfortunately, VANETs are potentially exposed to many attacks on network and application level. This paper, proposes a new intrusion detection system to protect the communication system of self-driving cars; utilising a combination of hierarchical models based on clusters and log parameters. This security system is designed to detect Sybil and Wormhole attacks in highway usage scenarios. It is based on clusters, utilising Time Division Multiple Access (TDMA) to overcome some of the obstacles of VANETs such as high density, high mobility and bandwidth limitations in exchanging messages. This makes the security system more efficient, accurate and capable of real time detection and quick in identification of malicious behaviour in VANETs. In this scheme, each vehicle log calculates and stores different parameter values after receiving the cooperative awareness messages from nearby vehicles. The vehicles exchange their log data and determine the difference between the parameters, which is utilised to detect Sybil attacks and Wormhole attacks. In order to realize efficient and effective intrusion detection system, we use the well-known network simulator (ns-2) to verify the performance of the security system. Simulation results indicate that the security system can achieve high detection rates and effectively detect anomalies with low rate of false alarms. [ABSTRACT FROM AUTHOR]

Nowadays, a typical processor may have multiple processing cores on a single chip. Furthermore, a special purpose processing unit called Graphic Processing Unit (GPU), originally designed for 2D/3D games, is now available for general purpose use in computers and mobile devices. However, the traditional programming languages which were designed to work with machines having single core CPUs, cannot utilize the parallelism available on multi-core processors efficiently. Therefore, to exploit the extraordinary processing power of multi-core processors, researchers are working on new tools and techniques to facilitate parallel programming. To this end, languages like CUDA and OpenCL have been introduced, which can be used to write code with parallelism. The main shortcoming of these languages is that programmer needs to specify all the complex details manually in order to parallelize the code across multiple cores. Therefore, the code written in these languages is difficult to understand, debug and maintain. Furthermore, to parallelize legacy code can require rewriting a significant portion of code in CUDA or OpenCL, which can consume significant time and resources. Thus, the amount of parallelism achieved is proportional to the skills of the programmer and the time spent in code optimizations. This paper proposes a new open source compiler, Rubus, to achieve seamless parallelism. The Rubus compiler relieves the programmer from manually specifying the low-level details. It analyses and transforms a sequential program into a parallel program automatically, without any user intervention. This achieves massive speedup and better utilization of the underlying hardware without a programmer’s expertise in parallel programming. For five different benchmarks, on average a speedup of 34.54 times has been achieved by Rubus as compared to Java on a basic GPU having only 96 cores. Whereas, for a matrix multiplication benchmark the average execution speedup of 84 times has been achieved by Rubus on the same GPU. Moreover, Rubus achieves this performance without drastically increasing the memory footprint of a program. [ABSTRACT FROM AUTHOR]

Multi-objective clustering has received widespread attention recently, as it can obtain more accurate and reasonable solution. In this paper, an improved multi-objective clustering framework using particle swarm optimization (IMCPSO) is proposed. Firstly, a novel particle representation for clustering problem is designed to help PSO search clustering solutions in continuous space. Secondly, the distribution of Pareto set is analyzed. The analysis results are applied to the leader selection strategy, and make algorithm avoid trapping in local optimum. Moreover, a clustering solution-improved method is proposed, which can increase the efficiency in searching clustering solution greatly. In the experiments, 28 datasets are used and nine state-of-the-art clustering algorithms are compared, the proposed method is superior to other approaches in the evaluation index ARI. [ABSTRACT FROM AUTHOR]

This paper studies a multi-item dynamic lot size problem for perishable products where stock deterioration rates and inventory costs are age-dependent. We explore structural properties in an optimal solution under two cost structures and develop a dynamic programming algorithm to solve the problem in polynomial time when the number of products is fixed. We establish forecast horizon results that can help the operation manager to decide the precise forecast horizon in a rolling decision-making process. Finally, based on a detailed test bed of instance, we obtain useful managerial insights on the impact of deterioration rate and lifetime of products on the length of forecast horizon. [ABSTRACT FROM AUTHOR]

The Grid scheduler, schedules user jobs on the best available resource in terms of resource characteristics by optimizing job execution time. Resource failure in Grid is no longer an exception but a regular occurring event as resources are increasingly being used by the scientific community to solve computationally intensive problems which typically run for days or even months. It is therefore absolutely essential that these long-running applications are able to tolerate failures and avoid re-computations from scratch after resource failure has occurred, to satisfy the user’s Quality of Service (QoS) requirement. Job Scheduling with Fault Tolerance in Grid Computing using Ant Colony Optimization is proposed to ensure that jobs are executed successfully even when resource failure has occurred. The technique employed in this paper, is the use of resource failure rate, as well as checkpoint-based roll back recovery strategy. Check-pointing aims at reducing the amount of work that is lost upon failure of the system by immediately saving the state of the system. A comparison of the proposed approach with an existing Ant Colony Optimization (ACO) algorithm is discussed. The experimental results of the implemented Fault Tolerance scheduling algorithm show that there is an improvement in the user’s QoS requirement over the existing ACO algorithm, which has no fault tolerance integrated in it. The performance evaluation of the two algorithms was measured in terms of the three main scheduling performance metrics: makespan, throughput and average turnaround time. [ABSTRACT FROM AUTHOR]

Overweight and obesity are highly prevalent in the population of the United States, affecting roughly 2/3 of Americans. These diseases, along with their associated conditions, are a major burden on the healthcare industry in terms of both dollars spent and effort expended. Volitional weight loss is attempted by many, but weight regain is common. The ability to predict which patients will lose weight and successfully maintain the loss versus those prone to regain weight would help ease this burden by allowing clinicians the ability to skip treatments likely to be ineffective. In this paper we introduce a new windowed approach to the persistent homology signal processing algorithm that, when paired with a modified, semimetric version of the Hausdorff distance, can differentiate the two groups where other commonly used methods fail. The novel approach is tested on accelerometer data gathered from an ongoing study at the University of Michigan. While most standard approaches to signal processing show no difference between the two groups, windowed persistent homology and the modified Hausdorff semimetric show a clear separation. This has significant implications for clinical decision making and patient care. [ABSTRACT FROM AUTHOR]

As a sustainable transportation mode, high-speed railway (HSR) has become an efficient way to meet the huge travel demand. However, due to the high acquisition and maintenance cost, it is impossible to build enough infrastructure and purchase enough train-sets. Great efforts are required to improve the transport capability of HSR. The utilization efficiency of train-sets (carrying tools of HSR) is one of the most important factors of the transport capacity of HSR. In order to enhance the utilization efficiency of the train-sets, this paper proposed a train-set circulation optimization model to minimize the total connection time. An innovative two-stage approach which contains segments generation and segments combination was designed to solve this model. In order to verify the feasibility of the proposed approach, an experiment was carried out in the Beijing-Tianjin passenger dedicated line, to fulfill a 174 trips train diagram. The model results showed that compared with the traditional Ant Colony Algorithm (ACA), the utilization efficiency of train-sets can be increased from 43.4% (ACA) to 46.9% (Two-Stage), and 1 train-set can be saved up to fulfill the same transportation tasks. The approach proposed in the study is faster and more stable than the traditional ones, by using which, the HSR staff can draw up the train-sets circulation plan more quickly and the utilization efficiency of the HSR system is also improved. [ABSTRACT FROM AUTHOR]

This paper presents a method for classifying the ancestry of Brazilian surnames based on historical sources. The information obtained forms the basis for applying fuzzy matching and machine learning classification algorithms to more than 46 million workers in 5 categories: Iberian, Italian, Japanese, German and East European. The vast majority (96.7%) of the single surnames were identified using a fuzzy matching and the rest using a method proposed by Cavnar and Trenkle (1994). A comparison of the results of the procedures with data on foreigners in the 1920 Census and with the geographic distribution of non-Iberian surnames underscores the accuracy of the procedure. The study shows that surname ancestry is associated with significant differences in wages and schooling. [ABSTRACT FROM AUTHOR]

Game theory based methods designed to solve the problem of community structure detection in complex networks have emerged in recent years as an alternative to classical and optimization based approaches. The Mixed Nash Extremal Optimization uses a generative relation for the characterization of Nash equilibria to identify the community structure of a network by converting the problem into a non-cooperative game. This paper proposes a method to enhance this algorithm by reducing the number of payoff function evaluations. Numerical experiments performed on synthetic and real-world networks show that this approach is efficient, with results better or just as good as other state-of-the-art methods. [ABSTRACT FROM AUTHOR]

This paper provides evidence on the usefulness of very high spatial resolution (VHR) imagery in gathering socioeconomic information in urban settlements. We use land cover, spectral, structure and texture features extracted from a Google Earth image of Liverpool (UK) to evaluate their potential to predict Living Environment Deprivation at a small statistical area level. We also contribute to the methodological literature on the estimation of socioeconomic indices with remote-sensing data by introducing elements from modern machine learning. In addition to classical approaches such as Ordinary Least Squares (OLS) regression and a spatial lag model, we explore the potential of the Gradient Boost Regressor and Random Forests to improve predictive performance and accuracy. In addition to novel predicting methods, we also introduce tools for model interpretation and evaluation such as feature importance and partial dependence plots, or cross-validation. Our results show that Random Forest proved to be the best model with an R2 of around 0.54, followed by Gradient Boost Regressor with 0.5. Both the spatial lag model and the OLS fall behind with significantly lower performances of 0.43 and 0.3, respectively. [ABSTRACT FROM AUTHOR]

Nowadays, the appetite for the investment and mergers and acquisitions (M&A) activity in RFID companies is growing rapidly. Although the huge number of papers have addressed the topic of business valuation models based on statistical methods or neural network methods, only a few are dedicated to constructing a general framework for business valuation that improves the performance with network graph (NG) and the corresponding community mining (CM) method. In this study, an NG based business valuation model is proposed, where real options approach (ROA) integrating CM method is designed to predict the company’s net profit as well as estimate the company value. Three improvements are made in the proposed valuation model: Firstly, our model figures out the credibility of the node belonging to each community and clusters the network according to the evolutionary Bayesian method. Secondly, the improved bacterial foraging optimization algorithm (IBFOA) is adopted to calculate the optimized Bayesian posterior probability function. Finally, in IBFOA, bi-objective method is used to assess the accuracy of prediction, and these two objectives are combined into one objective function using a new Pareto boundary method. The proposed method returns lower forecasting error than 10 well-known forecasting models on 3 different time interval valuing tasks for the real-life simulation of RFID companies. [ABSTRACT FROM AUTHOR]

An effective evaluation of transportation network efficiency could offer guidance for the optimal control of urban traffic. Based on the introduction and related mathematical analysis of three quantitative evaluation methods for transportation network efficiency, this paper compares the information measured by them, including network structure, traffic demand, travel choice behavior and other factors which affect network efficiency. Accordingly, the applicability of various evaluation methods is discussed. Through analyzing different transportation network examples it is obtained that Q-H method could reflect the influence of network structure, traffic demand and user route choice behavior on transportation network efficiency well. In addition, the transportation network efficiency measured by this method and Braess’s Paradox can be explained with each other, which indicates a better evaluation of the real operation condition of transportation network. Through the analysis of the network efficiency calculated by Q-H method, it can also be drawn that a specific appropriate demand is existed to a given transportation network. Meanwhile, under the fixed demand, both the critical network structure that guarantees the stability and the basic operation of the network and a specific network structure contributing to the largest value of the transportation network efficiency can be identified. [ABSTRACT FROM AUTHOR]

Due to the rise in awareness of environmental issues and the depletion of virgin resources, many firms have attempted to increase the sustainability of their activities. One efficient way to elevate sustainability is the consideration of corporate social responsibility (CSR) by designing a closed loop supply chain (CLSC). This paper has developed a mathematical model to increase corporate social responsibility in terms of job creation. Moreover the model, in addition to increasing total CLSC profit, provides a range of strategic decision solutions for decision makers to select a best action plan for a CLSC. A proposed multi-objective mixed-integer linear programming (MILP) model was solved with non-dominated sorting genetic algorithm II (NSGA-II). Fuzzy set theory was employed to select the best compromise solution from the Pareto-optimal solutions. A numerical example was used to validate the potential application of the proposed model. The results highlight the effect of CSR in the design of CLSC. [ABSTRACT FROM AUTHOR]