Search

China's pulp and paper industry (CPPI) has been always the main carbon emission source in recent years. However, the analysis on influencing factors of carbon emissions from this industry is insufficient. To address the issue, the CO 2 emissions from CPPI are estimated in the period of 2005-2019, the driving factors of CO 2 emissions are investigated by the logarithmic mean Divisia index (LMDI) method, the decoupling state of economic growth and CO 2 emissions is determined by Tapio decoupling model, and finally, future CO 2 emissions are predicted under four scenarios by the STIRPAT model to explore the potential of carbon peaking. The results show that CPPI exhibits a rapid increase and a fluctuating downward trend in CO 2 emissions during the period of 2005-2013 and 2014-2019, respectively. The main promoting and inhibiting factors to the increase of CO 2 emission are per capita industrial output value and energy intensity, respectively. There are five decoupling states of CO 2 emissions and economic growth during the study period, and the CO 2 emissions exhibit a weak decoupling state with the industrial output value growth in most years of the study period. It is very difficult to realize the carbon peaking goal by 2030 under the baseline and fast development scenarios. Therefore, efficient low carbon and strong low-carbon development policies are necessary and urgent for the realization of carbon peaking goal and the sustainable development of CPPI., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Alkaline residuals, such as wood ash and lime mud generated from pulp and paper mills, could be recycled as liming agents in sugar maple (Acer saccharum Marsh.) forests affected by soil acidification. The objectives of this study were (1) to evaluate soil chemistry, in particular soil acidity, after the application of three alkaline residuals from the pulp and paper industry, and (2) to determine if these alkaline residuals altered soil greenhouse gas (GHG) emissions as a result of the change in soil pH or due to their chemical composition. Soil properties and GHG fluxes were monitored for two years after alkaline residuals were applied to six forest sites dominated by sugar maple in southeastern Quebec, Canada. Each site received six treatments: wood ash applied at 5, 10 and 20 t ha -1 , lime mud (7.5 t ha -1 ), a mixture of slaker grits and green liquor sludge (7 t ha -1 ) and an unamended control. These treatments had acid-neutralizing power from 0 to 9 t ha -1 . All alkaline residuals buffered soil acidity as a function of their neutralizing power, and more neutralization occurred in the forest floor layer than in the underlying mineral soil. In the forest floor, the alkaline residual treatments significantly increased pH by more than one unit, nearly doubled the base saturation, and reduced exchangeable acidity, Al and Fe concentrations compared to control plots. The CO 2 and N 2 O fluxes were lower after application of alkaline residuals, and this was related to the soil pH increase and the type of alkaline residual applied. Lime mud was more effective at reducing GHG fluxes than other alkaline residuals. We conclude that these alkaline residuals can effectively counteract soil acidity in sugar maple forests without increasing soil GHG emissions, at least in the short term., (Copyright © 2019 Elsevier B.V. All rights reserved.)

This paper quantitatively investigates the compositions of the gaseous pollutants in the ambient air of a secondary fiber paper mill. Total volatile organic compounds (TVOC), formaldehyde (HCHO), sulfur compounds (H2S), and hydrocarbon compounds (CxHy) were analyzed on six sampling sites with photo-ionisation detector, acetylacetone spectrophotometric method, and gas detector. The results revealed that, the high levels of TVOC and CxHy were detected at the wet end of paper machine and the office area, respectively; all the H2S contents on the six sites exceeded the limit (0.06 mg m(-3)) seriously; the HCHO concentrations at other five sites were out of the limit (0.10 mg m(-3)) except for the wastewater treatment plant. Furthermore, the necessary discussions about the possible pollution sources were considered on the process flow, the chemical agents used, and the ambient conditions in the paper mill. For the sake of air pollution control in paper mills, these remarkable results and analysis lay some technical basis in the following researches that should attract more attentions.

Burning of joss paper and incense is still a very common traditional custom in countries with a majority Chinese population. The Hungry Ghost Festival which is celebrated in the 7 month of the Chinese calendar is one of the events where joss paper and incense are burned as offerings. This study investigates the impact of the Ghost Month Festival (open burning event) on air quality by analysis of the chemical composition of particulate matter (PM) and rainwater samples collected during this event, compared with data collected throughout the year, as well as bottom ash samples from burning the original joss paper and incense. The results showed that the change in the chemical composition of the rainwater and PM2.5 (PM ≤ 2.5 μm) atmospheric samples could be correlated directly with burning events during this festival, with many elements increasing between 18% and 60% during August and September compared to the yearly mean concentrations. The order of percentage increase in elemental composition (in rain water and PM2.5) during the Hungry Ghost Festival is as follows: Zn > Ca > K > Mg > Fe > Al > Na ∼ Mn ∼ Ti ∼ V > Cu > As > Ni > Co > Cd > Cr > Pb. The chemical composition of the original source materials (joss paper and incense for combustion) and their associated bottom ash were analysed to explain the impact of burning on air quality.

Air emissions from the U.S. pulp and paper sector have been federally regulated since 1978; however, regulations are periodically reviewed and revised to improve efficiency and effectiveness of existing emission standards. The Industrial Sectors Integrated Solutions (ISIS) model for the pulp and paper sector is currently under development at the U.S. Environmental Protection Agency (EPA), and can be utilized to facilitate multi-pollutant, sector-based analyses that are performed in conjunction with regulatory development. The model utilizes a multi-sector, multi-product dynamic linear modeling framework that evaluates the economic impact of emission reduction strategies for multiple air pollutants. The ISIS model considers facility-level economic, environmental, and technical parameters, as well as sector-level market data, to estimate the impacts of environmental regulations on the pulp and paper industry. Specifically, the model can be used to estimate U.S. and global market impacts of new or more stringent air regulations, such as impacts on product price, exports and imports, market demands, capital investment, and mill closures. One major challenge to developing a representative model is the need for an extensive amount of data. This article discusses the collection and processing of data for use in the model, as well as the methods used for building the ISIS pulp and paper database that facilitates the required analyses to support the air quality management of the pulp and paper sector.

There is concern that the carbon prices generated through climate policies are too low to create the incentives necessary to stimulate technological development. This paper empirically analyzes how the Swedish carbon dioxide (CO2) tax and the European Union emission trading system (EU ETS) have affected productivity development in the Swedish pulp and paper industry 1998-2008. A Luenberger total factor productivity (TFP) indicator is computed using data envelopment analysis. The results show that climate policy had a modest impact on technological development in the pulp and paper industry, and if significant it was negative. The price of fossil fuels, on the contrary, seems to have created important incentives for technological development. Hence, the results suggest that the carbon prices faced by the industry through EU ETS and the CO2 tax have been too low. Even though the data for this study is specific for Sweden, the models and results are applicable internationally. When designing policy to mitigate CO2 emissions, it is vital that the policy creates a carbon price that is high enough - otherwise the pressure on technological development will not be sufficiently strong., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Background: This study sought to ascertain whether there might be excess lung cancer mortality among the population residing in the vicinity of Spanish paper and board industries which report their emissions to the European Pollutant Emission Register (EPER)., Methods: This was an ecological study that modelled the Standardised Mortality Ratio (SMR) for lung cancer in 8073 Spanish towns over the period 1994-2003. Population exposure to industrial pollution was estimated on the basis of distance from town of residence to pollution source. An exploratory, near-versus-far analysis was conducted, using mixed Poisson regression models and an analysis of the effect of municipal proximity within a 50-kilometre radius of each of the 18 installations., Results: Results varied for the different facilities. In two instances there was an increasing mortality gradient with proximity to the installation, though this was exclusively observed among men., Conclusion: The study of cancer mortality in areas surrounding pollutant foci is a useful tool for environmental surveillance, and serves to highlight areas of interest susceptible to being investigated by ad hoc studies. Despite present limitations, recognition is therefore due to the advance represented by publication of the EPER and the study of pollutant foci.

Comprehensive surveys conducted at 5-yr intervals were used to estimate sulfur dioxide (SO,) and nitrogen oxides (NO.) emissions from U.S. pulp and paper mills for 1980, 1985, 1990, 1995, 2000, and 2005. Over the 25-yr period, paper production increased by 50%, whereas total SO, emissions declined by 60% to 340,000 short tons (t) and total NO, emissions decreased approximately 15% to 230,000 t. The downward emission trends resulted from a combination of factors, including reductions in oil and coal use, steadily declining fuel sulfur content, lower pulp and paper production in recent years, increased use of flue gas desulfurization systems on boilers, growing use of combustion modifications and add-on control systems to reduce boiler and gas turbine NO, emissions, and improvements in kraft recovery furnace operations.

In cooperation with the world's second largest manufacturer of beverage cartons (SIG Combibloc) for liquid foodstuffs an innovative off-take for neutralisation of reactive gas in a paper laminating machine was constructed. A great challenge during engineering work was ensuring a high concentration of the reactive gas where needed and at the same time minimising work place impact in a machine basically without housing. Preliminary 2D-models of the machine geometry proved to be insufficient in describing all the governing flow phenomena. A simplified 3D-geometry containing all important parts of the complex machinery was necessary for accurate predictions. It was found that the driving force of air movement and transport of reactive gas (which acts as an adhesive agent) from the reaction zone in the interior of the laminating machine to the outside is a boundary flow caused by the rapid movement of carton material and rotating cylinders. A physically correct simulation result of the boundary flow is a premise for correct prediction of air flow in and around the machinery. Lacking experimental data (due to an inaccessible geometry) a worst case scenario was constructed by generating a grid and using turbulence models that maximised mass transport in the boundary layer region and thus emission of (tracer)gas from the machine. CFD simulations were done using the geometry preprocessor Gambit, and the finite volume solver Fluent. The results of the analysis of the emission paths from the machine were surprising and led to the construction of an effective off-take relatively far away from the emission source. The chosen position ensures low disturbance of highly sensitive flow patterns inside the machine and diffusive mixing, dilution and contamination of the surroundings. The effect of the new off-take is an immediate and significant rise in air quality in the vicinity of the laminating machine and ensures maximum allowed concentration in the plant area. The product quality furthermore is uncompromised by the working off-take which was another important goal of this work.

Air emissions from the pulp and paper industry frequently contain reduced sulfur compounds (RSC), such as dimethyl sulfide (DMS) mixed with volatile organic compounds (VOC) (e.g., methanol, MeOH) and it is desirable to treat either one or both of these groups of compounds. The objective of this study was to assess the effects of VOC (MeOH) on the biofiltration of DMS. Results obtained from continuous experiments using three bench-scale biofilters packed with inorganic material clearly show that MeOH has a positive effect (11-fold increase) on the biofiltration of DMS. Further experiments indicate that MeOH addition enhances biomass concentration and viability (threefold) in the biofilters. However, a suspension of MeOH addition causes a rapid significant increase (twofold) in the removal rate of DMS, suggesting that the presence of MeOH also has a competitive effect on DMS biodegradation. This negative effect was also confirmed in batch experiments. The decrease of biofilter performance with time for a long-term suspension of MeOH addition indicates that MeOH addition is necessary to sustain a high removal rate of DMS in inorganic biofilters. Results on metabolic products of DMS biodegradation demonstrate that DMS is almost completely converted to sulfate in the absence of MeOH, while it is partially oxidized to elemental sulfur in the presence of MeOH. This study suggests that there exists an optimum mix of DMS and MeOH for the treatment of DMS emissions in inorganic biofilters., ((c) 2006 Wiley Periodicals, Inc.)

Changes in material use, energy use and emissions profiles of industry are the result of complex interrelationships among a multitude of technological and economic drivers. To better understand and guide such changes requires that attention is paid to the time-varying consequences that technology and economic influences have on an industry's choice of inputs and its associated (desired and undesired) outputs. This paper lays out an approach to improving our understanding of the dynamics of large industrial systems. The approach combines engineering and econometric analysis with a detailed representation of an industry's capital stock structure. A transparent dynamic computer modeling approach is chosen to integrate information from these analyses in ways that foster participation of stakeholders from industry and government agencies in all stages of the modeling process-from problem definition and determination of system boundaries to generation of scenarios and interpretation of results. Three case studies of industrial energy use in the USA are presented-one each for the iron and steel, pulp and paper, and ethylene industry. Dynamic models of these industries are described and then used to investigate alternative carbon emissions and investment-led policies. A comparison of results clearly points towards two key issues: the need for industry specific policy approaches in order to effectively influence industrial energy use, fuel mix and carbon emissions, and the need for longer time horizons than have typically been chosen for the analysis of industrial responses to climate change policies.

Co-firing of coal and paper mill sludge was conducted in a 103 MWth circulating fluidized bed boiler to investigate the effect of the sludge feeding rate on emissions of SOx, NOx, and CO. The preliminary results show that emissions of SOx and Nx decrease with increasing sludge feeding rate, but CO shows the reverse tendency due to the decrease in combustion temperature caused by a large amount of moisture in the sludge. All emissions met the local environmental requirements. The combustion ashes could be recycled as feed materials in the cement manufacturing process.

All experiments were carried out in a prototype vortexing fluidized bed combustor (VFBC). The dimension of the combustion chamber is 0.7 x 1.4 x 2 m, and the freeboard section is 1 m i.d. and 4 m in height. Paper sludge was used as the feeding material. Two types of coal particles were employed as the supplementary fuel. In order to understand the characteristics of the VFBC system for paper sludge incineration, the effect of various operating parameters, such as the primary airflow, excess air ratio, and secondary airflow rates, on temperature distribution, ash elutriation, combustion efficiency, and pollutant emissions were investigated.

This paper describes systematic work done in the field of atmospheric emissions from Portuguese Kraft pulp mills. This study led to the determination of emission factors from stationary sources that proved to be an important tool in assessing the need for investment in air pollution abatement equipment.

Unlabelled: A papermill in a small town has for many years caused a lot of odour annoyance. Odour exposures were determined by odour emission measurements and dispersion calculations. Odour exposure on immission level was determined by the use of a trained sniffing team. Odour annoyance was determined by panellists using a diary four times a day during a six week period. The odour annoyance was calculated as an Odour Annoyance Index. Distinction was made between different types of odours (rotten, wood). The relation between odour annoyance and the direction of wind and the distance of the observations from the source is presented. The relations between two dispersion models, the measured immission by the sniffing team and the odour annoyance, as determined by the panellists, are presented., Results: The relations between the distance from the source and the odour annoyance is strong. The relation between the direction of wind and the odour annoyance is also strong. A trend is shown between the odour annoyance and the immission level determined by the sniffing team. A strong correlation is found between the exposure calculated with the dispersion models and the measurements by the sniffing team.

The implementation of chemical filtration in air-conditioning systems in archive and library repositories has become standard practice for heritage institutions in many countries. This practice is codified in official standards with general reference to a substantial body of scientific publications on the effects of air pollutants on paper materials. In this paper we report the application of a well-established decision analysis approach elaborating an integral cost-benefit perspective to provide decision support to four European national heritage institutions confronted with dilemmas in connection to chemical air filtration. Available scientific evidence for air pollution induced damage of paper material is reviewed and weighed against financial and environmental costs of air pollution control. Exposure of paper to both indoor and outdoor generated air pollutants at typical concentration levels observed within storage areas is expected to cause minimal to no additional yellowing and embrittlement, while the costs of chemical air filtration are significant. From a cost-benefit perspective the use of chemical air filtration in typical library and archive repositories is therefore discouraged. [ABSTRACT FROM PUBLISHER]

This paper studies the effects of uncoordinated environmental tax policies on firms' incentives to form bilateral R&D collaborations. It is shown that the complete network is pair-wise stable for small differences in the taxation of environmental emissions. Larger tax differentials may induce firms to abandon all their international collaborations. [ABSTRACT FROM AUTHOR]

Abstract: This paper discusses the relationship between environmental and economic performance and the influence of corporate strategies with regard to sustainability and the environment. After formulating a theoretical model, results are reported from an empirical analysis of the European paper manufacturing industry. New data are used to test hypotheses derived from the theoretical model, using environmental performance indices representing different corporate environmental strategy orientations. In particular, an emissions-based index largely reflecting end-of-pipe strategies and an inputs-based index reflecting integrated pollution prevention are distinguished. For the emissions-based index, a predominantly negative relationship between environmental and economic performance is found, whereas for the inputs-based index no significant link is found. This is consistent with the theoretical model, which predicts the possibility of different relationships. The results also show that for firms with pollution prevention-oriented corporate environmental strategies, the relationship between environmental and economic performance is more positive, thus making improvements in corporate sustainability more likely. Based on this last insight, managerial implications of this are discussed with regard to strategy choices, investment decisions and operations management. [Copyright &y& Elsevier]

Deals with a study which investigated the uptake of air pollutants and their synergistic effects on paper. Chemical reactions involved in the adsorption of sulfur dioxide in paper; Experimental set up; Results; Discussion.