Search

This paper proposed a new method for the determination of chlorine in coal by Eschka's mixture decomposition-ion chromatography so as to satisfy the needs of determining chlorine content in coal samples in large batches in coal exploration, coal production and processing industries.Specifically, this paper improved the sample pretreatment steps and determined the experimental parameters.The detection limit of the method was 0.001 7 %, the relative standard deviations of ten parallel determinations of three actual coal samples were in the range of 1.08 % ~3.92 %, the recoveries of six spiked determinations were in the range of 98 % ~104 %, and the results of the three standard coal samples were all within the guaranteed values.Results showed that the detection limit of the method was lower than that of the national standard method, and the precision and accuracy met or exceeded the national standard method.The determination of chlorine in coal by Eschka's mixture decomposition-ion chromatography has the advantages of simple operation, low cost and high determination efficiency and could be widely applied in the batch determination of a large number of samples.

In both the manufacturing and chemical industries, benzoquinone is a crucial chemical product. A perfect and economical method for making benzoquinone is the electrochemical oxidation of phenol, thanks to the traditional thermal catalytic oxidation of phenol process requires high cost, serious pollution and harsh reaction conditions. Here, a unique heterostructure electrocatalyst on nickel foam (NF) consisting of nickel sulfide and nickel oxide (Ni9S8‐Ni15O16/NF) was produced, and this catalyst exhibited a low overpotential (1.35 V vs. RHE) and prominent selectivity (99 %) for electrochemical phenol oxidation reaction (EOP). Ni9S8‐Ni15O16/NF is beneficial for lowering the reaction energy barrier and boosting reactivity in the EOP process according to density functional theory (DFT) calculations. Additionally, an alkali/acid hybrid flow cell was successfully established by connecting Ni9S8‐Ni15O16/NF and commercial RuIr/Ti in series to catalyze phenol oxidation in an alkaline medium and hydrogen evolution in an acid medium, respectively. A cell voltage of only 0.60 V was applied to produce a current density of 10 mA cm−2. Meanwhile, the system continued to operate at 0.90 V for 12 days, showing remarkable long‐term stability. The unique configuration of the acid‐base hybrid flow cell electrolyzer provides valuable guidance for the efficient and environmentally friendly electrooxidation of phenol to benzoquinone. [ABSTRACT FROM AUTHOR]

The electrochemical desalination technique is recognized as a promising solution to alleviate freshwater shortages, challenges yet persists in achieving optimal energy efficiency and cost‐effectiveness. Herein, a hybrid acid/alkali zinc air desalination battery (hAA‐ZADB) capable of concurrent desalination and high‐power density is reported. To improve cathodic efficiency and cost‐effectiveness, an electrocatalyst with dual atomic Fe–Mn sites on porous dodecahedral carbon (Mn‐Fe/p‐DC) is fabricated through a simple direct pyrolysis strategy for oxygen reduction reaction (ORR). The Mn–Fe/p‐DC‐900 electrocatalyst demonstrates exceptional electrocatalytic activity (E1/2 = 0.8 V in 0.5 m H2SO4) for ORR. This innovative hybrid acid/alkali cell design, coupled with advanced electrocatalysts, empowers the hAA‐ZADB system to achieve outstanding performance benchmarks with a high open circuit voltage of 2.22 V, an impressive power density of 375 mW cm−2, and notably elevated energy output of 106.9 kJ mol−1 even at a current density of 100 mA cm−2 during desalination. Distinguishing this work is its additional functionality, evident in a rapid salt removal rate of 3.64 mg cm−2 min−1 during desalination, achieving an impressive 88.67% removal of 0.6 M NaCl. This study highlights the promising potential of employing metallic air batteries for a self‐powered desalination technique applicable to specific scenarios. [ABSTRACT FROM AUTHOR]

Rechargeable Zn–air batteries (ZABs) are considered highly competitive technologies for meeting the energy demands of the next generation, whether for energy storage or portable power. However, their practical application is hindered by critical challenges such as low voltage, CO2 poisoning at the cathode, low power density, and poor charging efficiency Herein, a rechargeable hybrid alkali/acid Zn–air battery (h‐RZAB) that effectively separates the discharge process in an acidic environment from the charging process in an alkaline environment, utilizing oxygen reduction reaction (ORR) and glycerol oxidation reaction (GOR) respectively is reported. Compared to previously reported ZABs, this proof‐of‐concept device demonstrates impressive performance, exhibiting a high power density of 562.7 mW cm−2 and a high operating voltage during discharging. Moreover, the battery requires a significantly reduced charging voltage due to the concurrent utilization of biomass‐derived glycerol, resulting in practical and cost‐effective advantages. The decoupled system offers great flexibility for intermittently generated renewable power sources and presents cost advantages over traditional ZABs. As a result, this technology holds significant promise in opening avenues for the future development of renewable energy‐compatible electrochemical devices. [ABSTRACT FROM AUTHOR]