Search

High-power vacuum electron devices (VEDs) are attractive, because of their broad applications, such as advance radars, electromagnetic warfare, and plasma reactors. In this paper, a Ka band mega-watt sheet electron beam traveling wave tube (TWT) is reported. A two-staged rectangular waveguide grating slow wave structure (SWS) driven by a sheet electron beam (20 mm × 1 mm, 164.8 kV, 850 A, 20 ns) is used in this TWT. In order to suppress the self-excited oscillation, a rectangular BeO attenuator is inserted between the two-staged SWSs. The experimental results show that the TWT can produce more than 2 MW output power from 34.2 to 35.5 GHz. And the maximum output power is 4.24 MW at 35 GHz, corresponding to the gain of 25.9 dB. In the future, the TWT will be used to perform research on biomedical effects and imaging. [ABSTRACT FROM AUTHOR]

A Ka-band sheet electron beam (SEB) traveling-wave tube (TWT) based on three-slot staggered-ladder (TSTL) coupled-cavity slow-wave structure (CC-SWS) is proposed. The high-frequency characteristics of TSTL SWS were analyzed in detail. A well-matched input/output coupling system that solves the problem of energy coupling between the SWS and the external circuit was designed. A new method of loading the distributed attenuator for TSTL SWS was investigated for suppressing backward wave oscillation effectively. In addition, a SEB gun which can produce the SEB conveniently was optimized. A small tunable periodic cusped magnet (STPCM) system was designed to focus the low voltage, high-current SEB, which decreases the whole dimension of the TWT sufficiently. Moreover, the special STPCM system is predicted to exhibit 100% beam transmission efficiency. Finally, the beam-wave interaction was studied. The results obtained by CST simulation show that the SEB TWT can produce output power over 5 kW within the bandwidth ranging from 31.5 to 35.5 GHz, and the maximum output power is 10.15 kW at 33 GHz, corresponding electron efficiency of 10.36%. The fabrication of the device is under way. [ABSTRACT FROM PUBLISHER]

A 140-GHz folded-waveguide traveling wave tube (FWG-TWT) with a relatively larger circular electron beam tunnel was designed and developed. Using simulation software, the high frequency characteristics, the transfer characteristics, and the beam-wave interaction of the TWT were studied in detail. The simulation predicted up to 98 W output power and about 43 dB gain of FWG-TWT at the center frequency. The input and output couplers compatible with the FWG-SWS and the periodic permanent magnet focusing structure were designed. The FWG-TWT thus designed was fabricated and tested. The experimental result shows the output power exceeding 1.6 W and the gain exceeding 25 dB at 140 GHz when the input power is 5 mW. The reasons for the departure of the experimental from the simulated results have been explained. [ABSTRACT FROM PUBLISHER]

In this paper, a high-power Ka-band traveling-wave tube (TWT) driven by a sheet electron beam is proposed and demonstrated by means of the simulation and experimental methods. The single grating rectangular waveguide with large width-to-height ratio is used as the slow-wave structure (SWS). An $E$ -plane bend energy coupler is put forward to feed this wide SWS. An irregular transition structure between the input waveguide and the SWS is suggested and designed, which is beneficial to suppress the self-excited oscillation. For a practical electron beam (20 mm $\times \,\, 1$ mm, 150.1 kV, 850 A, and 20-ns), the output power of this single rectangular grating sheet beam TWT is larger than 750 kW from 34.5 to 35.4 GHz. The maximum power is 1.21 MW at 35 GHz, corresponding to a gain of 20.4 dB. [ABSTRACT FROM PUBLISHER]

In this paper, a novel small tunable periodic cusped magnet (NSTPCM) system is proposed for the purpose of realizing low voltage, big current sheet electron beam propagation in a long distance in engineering, which is composed of a series of position-fixed magnet blocks in alignment and freely sliding staggered pole pieces. This kind of NSTPCM not only generates higher magnetic field in the axial direction but also realizes more convenient adjustment of magnetic field in the transverse direction. This NSTPCM system has been successfully applied in a Ka-band sheet electron beam staggered double vane traveling wave tube. The tested sheet beam transmission efficiency is $>93$ % in a 112.7-mm-length slow-wave structure under the condition of beam voltage 24.3 kV and beam current 0.8 A. Moreover, the measured output power is $>75$ W in the range from 33 to 37.5 GHz, and the maximum output power is 128 W at 34 GHz. This paper provides the foundation for the development of sheet electron beam vacuum devices. [ABSTRACT FROM PUBLISHER]

In this paper, a wideband 220-GHz sheet-beam traveling-wave tube (TWT) based on staggered double vane slow-wave structure (SWS) is investigated. A novel method of loading the attenuator into the SWS for suppressing backward wave oscillation is proposed. In addition, a novel focusing electrode of the sheet beam gun is carried out in this paper, which is a whole structure but divided into two parts artificially, one is used to compress the electron beam in $X$ -direction and the other is used to compress the electron beam in $Y$ -direction. In addition, a novel anode is redesigned to reduce the defocusing effect caused by the equipotential surfaces. A nonuniform periodically cusped magnet is used for focusing the sheet electron beam, which is predicted to exhibit 100% beam transmission efficiency in a 75-mm length drift tube. The high-frequency characteristics of the SWS and the beam-wave interaction are also studied. The results reveal that the designed TWT is expected to generate over 78.125-W average power at 214 GHz, and the 3-dB bandwidth is 31.5 GHz, ranging from 203 to 234.5 GHz. [ABSTRACT FROM PUBLISHER]

A novel electron-optical system is proposed for dual azimuthally stacked radial sheet electron beams (ARSEBs). The two sheet beams are emitted from curved surfaces of two cathodes and are focused by a focusing electrode, which is carefully designed to produce a symmetric field distribution for the two beams and to avoid interference between the beams. A common tunable periodic cusped magnetic focusing system is also designed to focus the two ARSEBs. The dual sheet beams are used in a traveling wave tube (TWT) consisting of a cascade of two azimuthally supported angular log-periodic strip-line (ASALS) slow-wave structures (SWSs). The transmission efficiency in the presence of beam–wave interaction is 93%. The particle-in-cell simulation results show that for a beam voltage of 4400 V and a current of 0.39 A, the proposed cascaded TWT has a maximum gain of 32.5 dB at 35 GHz and a maximum output power of 180 W; this is a significant gain improvement over a TWT using a single ASALS SWS. [ABSTRACT FROM AUTHOR]

A novel sine groove waveguide slow wave structure (SGW-SWS), originated from the sine waveguide (SW), is proposed for a wideband terahertz (THz) traveling wave tube (TWT). SGW-SWS not only has high interaction impedance in a relatively wide frequency band, but also has a wide beam tunnel. In addition, it can be fabricated using the Nano-Computer Numerical Control (CNC) milling techniques. The high-frequency simulation results show that, under the same dispersion, the passband of SGW-SWS is 23 GHz wider than that of SW-SWS, and the average interaction impedance of SGW-SWS is higher than that of SW-SWS in the whole passband. And the transverse dimension of beam tunnel is independent of the dispersion characteristics of SGW-SWS, so the beam current can be further increased by enlarging the size of beam tunnel. Moreover, the particle-in-cell (PIC) simulation results reveal that the saturated power and electronic efficiency of SGW-TWT in the frequency range of 201–260 GHz are more than 84.9 W and 2.72%, respectively, when the operating voltage is 20.8 kV and the beam current is 150 mA. [ABSTRACT FROM AUTHOR]

In this article, a novel dielectric-supported staggered dual-meander-line (DS-SDML) planar slow-wave structure (SWS) is proposed for a traveling wave tube (TWT) working at ${E}$ -band. The proposed staggered arrangement of meander-lines (MLs) leads to a stronger beam–wave interaction and achieves higher output power as compared to the symmetric arrangement. The input–output couplers have been designed by using staggered stepped double ridge waveguide, to connect the standard ${E}$ -band rectangular waveguide and the DS-SDML SWS. An attenuator and pitch tapering have been applied to the proposed SWS to suppress the unwanted frequencies and to improve the output power. Particle-in-cell (PIC) simulation results show that for an 11.8-kV, 200-mA sheet-beam, the output power can reach 283 W at 75 GHz, with a maximum gain and electronic efficiency of 34.5 dB and 11.9%, respectively. [ABSTRACT FROM AUTHOR]

In this paper, a stacked dual beam electron gun and the associated electron optical system are proposed. The stacked dual beam electron gun includes two compact focusing electrodes which help to achieve dual sheet beams. As an application of this dual beam electron gun, a 340 GHz integrated dual beam traveling wave tube (TWT) based on the staggered dual vane slow-wave structure (SWS) is also put forward. In order to reduce the length of the TWT, a novel input/output coupler is introduced. The overall transmission characteristics of the SWS structure together with the input/output couplers show a wide bandwidth covering a frequency range of 306 GHz to 360 GHz. Based on the parameters obtained for the integrated TWT, a stacked dual-beam electron gun with dual focusing electrodes is designed to achieve a beam current of 43 mA, a beam voltage of 21.4 kV, and a cross-sectional size of each beam of 0.3 mm × 0.08 mm. A uniform magnetic field of 0.52 T is utilized to focus the dual electron beams, and a beam transmission efficiency of 97.1% is achieved over a length of 50 mm. Finally, particle in cell simulation results show that the integrated dual-beam TWT can generate an output power of 5 W over the frequency range of 315 GHz to 350 GHz, with the maximum output power of 24.5 W at 330 GHz. [ABSTRACT FROM AUTHOR]

The symmetrical microstrip angular log-periodic meander-line (ALPML) slow-wave structure (SWS), which is suitable for Ka-band low-voltage traveling-wave tubes, is described in this paper. The dispersion characteristics and coupling impendence of this kind of SWS are achieved by simulation. A radial uniform magnetic field of 0.4 T is developed using radially magnetized permanent magnets to focus the radial sheet electron beam. To exploit the potentialities of the symmetrical ALPML SWS, the beam–wave interaction is carried out with a radial convergent and a divergent sheet electron beam. For the radial divergent electron beam with a voltage of 791 V and a current of 0.3 A, an output power over 60 W with an electron efficiency of 26% at 30 GHz is achieved from particle-in-cell simulation. The effects of misalignments and phase mismatches are carried out at the end. [ABSTRACT FROM AUTHOR]

In order to alleviate the problem of achieving large powers beyond 10 kW at frequencies as high as 220 GHz, a two-stage, two-sheet-beam relativistic TWT (SBRTWT) was proposed. For one-stage SBRTWT, there exists instability phenomenon as the effect of electron noise will become large enough compared with the small input power. To avoid the effect, the gain of the first-stage tube was decreased, and its output power was employed to drive the second-stage tube. A large-width branch-guide energy coupler was proposed, analyzed and designed, which can solve the difficult problem to couple the amplified microwave from a wide waveguide to another wide waveguide. A two-beam SBRTWT of 70 kW output with a gain of 28.5 dB was predicted. The findings establish that the two-stage configuration provides larger output powers than the single-stage configuration of SBRTWT and call for further research in two-stage SBRTWT. [ABSTRACT FROM PUBLISHER]

This article studies and summarizes the operating characteristics of a ${G}$ -band folded waveguide traveling wave tube (TWT) amplifier enhanced by the $\pi $ -mode extended interaction cavities. Compared with conventional ${G}$ -band TWTs, the proposed amplifier can at once obtain a higher gain in a shorter interaction circuit length and ensure a proper operating bandwidth. The key of the design is introducing the $\pi $ -mode multigap resonant cavity with alternating wide and narrow slots, which will improve the working performance of the whole device by shortening the length of the interaction circuit, enhancing its interaction effect, and improving its gain of unit length. In this design, the operation bandwidth is expanded by stagger tuning technique. In addition, the influence of cavity loss is examined so that the optimal performance is achieved. The PIC simulation results show that when the operating voltage is 21 kV and the operating current 80 mA, the maximum average output power of the designed TWT amplifier is 65.78 W at 217.4 GHz, which is corresponding to the maximum gain and efficiency of 37.38 dB and 3.9%, respectively. The gain per unit length is 12.64 dB/cm and the 3-dB bandwidth is 3.5 GHz. [ABSTRACT FROM AUTHOR]

A $Q$ -band traveling-wave tube (TWT) with profiled helix pitches and profiled inner diameters of slow wave structure (SWS) is proposed. The transmission characteristics of the $Q$ -band TWT are simulated by the Computer Simulation Technology (CST). In the operating frequency band (36.5–41.5 GHz), the simulated voltage standing wave ratio (VSWR) is less than 1.5. In addition, the beam–wave interaction is simulated to predict the performance of the $Q$ -band TWT when the beam voltage and beam current are 8.5 kV and 60 mA, respectively, and the axial focusing magnetic field is 0.4 T. In the operating frequency band, the self-oscillation is well suppressed, and the device efficiency of the $Q$ -band TWT exceeds 63.5%, and the saturated output power and gain exceed 83 W and 45 dB, respectively, especially the device efficiency can reach the maximum of 69.5% at 37 GHz. When it is backed off 6 dB from the saturation, the device efficiency exceeds 40.5%, up to 42.7% at 39 GHz. Preliminary experiments have confirmed the design. These results show that the proposed $Q$ -band TWT has important applications to the next generation wireless communication system with high efficiency. [ABSTRACT FROM AUTHOR]

A novel electron-optical system (EOS) for ${G}$ -band traveling-wave tubes (TWT) is investigated by simulation and verified by experiment. The EOS includes a sheet beam electron gun, a tunable periodic cusped magnetic focusing (TPCMF), and a collector. An elliptical focus electrode (FE) featuring a simple geometry and easy fabrication is utilized to compress the pencil beam into the sheet beam with a cross section of 0.4 mm $\times0.1$ mm. The electron gun with a cylindrical cathode of 0.8 mm diameter generates the sheet beam with voltage of 22 kV and current of 115 mA. Based on the sheet beam electron gun, the TPCMF with easy assembly and compact size is then proposed. The experimental results show that the beam transmission is 92.1% within a beam tunnel (its length 21.2 mm and cross section 0.8 mm $\times0.15$ mm). The EOS is suitable for ${G}$ -band TWT. [ABSTRACT FROM AUTHOR]

In this article, we propose a simulation method to investigate the noise mechanism of traveling-wave tube (TWT). Based on the nonlinear theory of Lagrangian description, 1-D noise model is established to analyze the shot noise and the velocity noise of the electron beam in the drift space, which clearly shows that the beam noise propagates along the electron beam with standing wave shape. The shot noise and the velocity noise can be periodically converted into each other along electron beam transmission, which is consistent with the prediction of the classical noise theory developed by Pierce and Danielson (1954). Using the nonlinear beam–wave interaction theory, the evolution process of the shot noise and the velocity noise of the electron beam transforming to the electromagnetic wave in TWT is illustrated. The calculated results show that the input position of the slow wave circuit may affect the noise power spectral density (NPSD) of the device. The proposed method can provide more intuitive and simple images to explain the noise mechanism of TWT. [ABSTRACT FROM AUTHOR]

Traveling wave tube (TWT) is an attractive solution for wideband and high-power sources or amplifiers in the terahertz (THz) band. In this article, a novel slow-wave structure (SWS) for TWT, named double tunnel sine waveguide (DTSW), which is based on sine waveguide (SW), is proposed. The following key technologies are adopted: 1) the rectangular holes, at which the operating mode is cutoff, are alternately opened on the sine-shaped ridges to form two electron beam tunnels and 2) the lower surface of rectangular holes is flush with the top of sine-shaped ridges. Compared with the SW-SWS, DTSW-SWS has the wider operating band and higher interaction impedance under the condition that the phase velocity of the two SWSs is at the same level. In addition, DTSW-SWS is simple in structure and easy to fabricate. The particle-in-cell simulation results reveal that DTSW-TWT has an output power of more than 202 W in the frequency range of 202–255 GHz with the maximum power of ~405 W and electron efficiency of ~9.8% at 215 GHz, under the operating voltage of 23 kV and beam current of 180 mA. Therefore, the DTSW should be considered as a promising SWS for the high-power and wideband THz traveling wave amplifier. [ABSTRACT FROM AUTHOR]

A large signal beam-wave interaction model for the analysis of folded waveguide traveling wave-tube (FWG TWT) is proposed. The slow-wave structure is modeled as a sequence of coupled resonant cavities. The electron beam is treated as a current source that can induce electromagnetic waves in the cavity. The beam-wave interacting process is modeled as an active matrix. Compared with the other models only calculating the in-band characteristic of FWG TWT, our model can provide characteristic analysis in both in-band and near cutoff regions, and thus broaden operating bandwidth and suppress oscillation. As verification, two FWG TWT examples were designed by using our model. Its performances predicted by our code agree well with that obtained by the experiment and particle-in-cell software, respectively. [ABSTRACT FROM AUTHOR]

This paper puts forward a novel dual-beam overmoded folded waveguide (FW) slow-wave structure (SWS), which is loaded with photonic crystals. In this novel structure, the two electron beams pass through the small gaps between the photonic crystal structures and the FW; the dimension of the FW is twice larger than that of the fundamental mode structure. The novel dual-beam photonic crystal overmoded FW traveling-wave tube (TWT) is proposed on the basis of the SWS. And, a mode converter is introduced to achieve the connection between the SWS and the input/output structure, and the mode transformation. At the operating voltage of 21.2 kV and the operating current of 320 mA, the proposed TWT can generate 128 W of output power at 220 GHz, and its 3-dB bandwidth is 7 GHz, ranging from 216 to 223 GHz. [ABSTRACT FROM AUTHOR]

A high-harmonic traveling-wave tube (HHTWT) is designed, developed, and tested in this paper. This device is configured as a multiplier–amplifier with Q-band input signals and its third harmonic, i.e., D-band output power. The tested result demonstrates that 280 mW at 133.5 GHz is obtained as a result of 200 mW at 44.5-GHz input signal. The simulation and experiment validate that the high-harmonic radiation can be generated and amplified in the HHTWT. The approach described in this paper could find application in exploring high power, wideband tunable terahertz source. This paper is expanded from a conference paper on IVEC 2017. The detail design produce and tested result are added in this paper. The explanation of the simulation and tested results is also presented. [ABSTRACT FROM AUTHOR]