Search

This study compared syntactic complexity between undergraduate students' research papers and published research papers. A 2 (Groups: experts, students) × 4 (Sections: introduction, methods, results, discussions) mixed factorial analysis of variance (ANOVA) was conducted on each of the following variables: T-unit length, clause density, the frequencies of adverbial clauses, relative clauses, and nominal clauses. The analyses showed there were longer T-units and fewer adverbial clauses in the published papers than in the student papers. Section effects were robust. Qualitative analyses were further conducted to reveal how the student research paper is different from the published papers syntactically. Implications for education were discussed. [ABSTRACT FROM AUTHOR]

Analysis of variance (ANOVA) may be required by researchers as an inferential statistical test when more than two means require comparison. This paper explains how to perform ANOVA in Microsoft Excel., (Copyright © 2018 Elsevier B.V. All rights reserved.)

The apps for drawing are present in our children's life. Nevertheless, little is known about the impact of mobile technology on the freehand drawing educational activity. There are few works which are contextualised within short periods of time, with teachers who are not theirs and, in some cases, outside the children's classroom. In this paper, we are focussed on the use of technology on freehand drawing activity. Thus, we have compared the graphics produced by 4- and 5-year-old children with paper&crayon in comparison with those with tablet-finger. Children made the drawings during a planned free-drawing activity, in their ordinary classrooms, with their teachers and during five sessions. Assessment of drawings has evidenced tablet feasibility for making graphics. Nevertheless, with the passing of time, quality of graphics (tablet-finger vs paper&crayons), are nearly matched, demonstrating the low impact level technology has on this activity. In addition, if drawings are analysed specifically according to ages, results have shown that both groups have to develop adaptation strategies of visual perceptual skills and fine motor skills for the touch screen in order to obtain the same quality in the drawings made on both support types. [ABSTRACT FROM AUTHOR]

A novel approach for paper drying using airborne ultrasound technology is presented. A unique experimental setup is developed, and a systematic study is conducted using 23 factorial design of experiments and Analysis of Variance. Three controlling factors are considered in the experiments including the initial moisture content, basis weight and refining condition. The outcome of the experiments is compared to a previous work on direct-contact ultrasonic drying of paper. The results confirm that similar to direct-contact, for airborne ultrasonic drying, the basis weight/thickness of the sample is the most important factor in ultrasonic drying and it is followed by the effect of initial moisture content. Using linear regression model, a correlation for predicting the total time of ultrasonic drying is provided. Quality of the dried samples is evaluated, and the permeability measurements confirmed the effect of pore characteristics on ultrasonic drying. The analysis for energy consumption reveals that airborne ultrasonic drying is more efficient at higher moisture contents. [ABSTRACT FROM AUTHOR]

A systematic-study is conducted using an innovative technology for paper drying by applying ultrasound mechanism. The advantages include greater energy efficiency, lower drying time and temperature, improvement of the product quality, and it is considered a green technology. The effects of initial moisture content, thickness, and refining condition are studied for different types of pulps (hardwood and softwood) using 23 factorial design of experiments. Analysis of Variance show that in the range of the studied parameters, thickness has the maximum effect on ultrasonic drying time followed by the initial moisture content. In addition, using a linear regression model, a relationships for the total time of drying is provided. The results confirmed that ultrasonic drying is more efficient at higher moisture content and higher thickness of the sample. These results are related to the structural characteristic of the samples such as porosity, pore distribution, and surface roughness. [ABSTRACT FROM AUTHOR]

Describes a study that seeks to confirm several key factors in computer-based versus paper-based assessment. Based on earlier research, the factors considered in this study of undergraduates include content familiarity; computer familiarity; competitiveness; and gender. Reports results of analysis of variance that showed the computer-based test group outperformed the paper-based test group. (Author/LRW)

Describes a two-part study involving 14- to 15-year-old high school students in New South Wales (Australia) that compared two modes of responding to free response examination questions: by computer and by pen and paper. Discusses results of analysis of variance. (Author/LRW)

Utilizing the Test of English Proficiency, developed by Seoul National University (TEPS), examined comparability between the paper-based language test and the computer-based language test based on content and construct validation employing content analyses based on corpus linguistic techniques in addition to such statistical analyses as correlational analyses, analysis of variance, and confirmatory factor analysis. (Author/VWL)

Compares the performance of education undergraduates with high or low spatial-skill scores who learned how to calculate surface area using hypertext, computer-assisted instruction, conventional paper materials, or program control. Results are reported for misconceptions, correct problems, time on lesson, enjoyment rating, screens viewed, and nonsequential choices. (20 references) (LAE)

Tight assembly of stator windings with no insulation paper damage is a manufacturing challenge. We evaluate different sets of parts according to the following parameters: magnet wire thickness, stator slot smoothness, length of the straight magnet wire after the slot end, and type and amount of insulation cap at the end of the slot. These parameters have discrete values with small differences between them. The damage criterion is the decrease of the insulation paper breakdown voltage after assembly/disassembly of parts, assembled in a small set of designed experiments. Parameter values, i.e., levels at individual experiments are set by an orthogonal experiment matrix. Repetition of each experiment provides statistical significance. Data analysis shows that the additive model alone is not sufficient due to the high correlation of the parameters' influences. We extend the model to include interparameter influences, which we model by adding a virtual parameter. The extended additive model generates parameter values that do not degrade the insulation paper breakdown voltage within the manufacturing process. These values are verified by repetitions of the control experiment.

Background: The Integrated Palliative Care Outcome Scale (IPOS) validly and reliably measures symptoms and concerns of those receiving palliative care. Aim: To determine the equivalence of the paper version with an electronic version of the IPOS (eIPOS). Design: Multicentre randomised crossover trial (NCT03879668) with a within-subject comparison of the two modes (washout period 30 min). Setting/Participants: Convenience sample of specialist inpatient and palliative home care patients aged over 18 years with cancer and non-cancer conditions was recruited. Scores were compared using intraclass correlation coefficients (ICC), Bland-Altman plots and via a mixed-effects analysis of variance. Results: Fifty patients were randomised to complete paper-electronic (n = 24) and electronic-paper (n = 26) IPOS with median age 69 years (range 24–95), 56% male, 16% non-cancer. The ICCs showed very high concordance for the total score (ICC 0.99, 95% CI 0.98–1.00), lowest ICCs being observed for symptoms 'Appetite loss' and 'Drowsiness' (ICC 0.95, 95% CI 0.92–0.97). Nine of seventeen items had ICCs above 0.98, as did all subscales. No statistically significant mode, order, age, and interaction effects were observed for IPOS total score and subscales, except for 'Communication' (Fmode = 5.9, p = 0.019). Fifty-eight percent preferred the electronic version. In the group 75+ years, 53% preferred the paper version. Only three entries in the free-text main problems differed between the versions. Conclusion: The very high equivalence in scores and free text between the IPOS and the eIPOS demonstrates that eIPOS is feasible and reliable in an older palliative population. [ABSTRACT FROM AUTHOR]

The aim of this study is to employ a response surface methodology (RSM) to optimize experimental parameters in microfluidic paper-based analytical devices (µ-PADs). The independent parameters include concentrations and volumes of acetylcholinesterase, acetylthiocholine iodide, and 5,5-dithiobis-(2-nitrobenzoic acid). Their effect on mean color intensity was tested and optimized. From the analysis of variance, high regression and fitting values were obtained between the experimental and RSM predicted mean color intensity. Under optimum conditions, satisfactory linearity (R2 > 0.9990) in the range of 0.25–16 mg/L was obtained for the studied pesticides. The limit of detection (LOD) varies from 0.13 to 0.27 mg/L; high precision (RSD of 3.8–8.0%), reproducibility (RSD of 7.2–11.0%), and recovery (78–97%) were achieved. The RSM approach has been demonstrated to be more efficient than the traditional approach. It resulted in a µ-PAD system with less amount of reagent usage and better LOD compared with a univariate approach. [ABSTRACT FROM AUTHOR]

Appropriate paper-based technology (APT) is used to provide postural support for children with cerebral palsy (CP) in low-resourced settings. This pilot study aimed to evaluate the impact of APT on the children's and families' lives. A convenience sample of children with CP and their families participated. Inclusion was based on the Gross Motor Function Classification System levels IV and V. APT seating or standing frames were provided for six months. A mixed methods impact of APT devices on the children and families included the Family Impact Assistive Technology Scale for Adaptive Seating (FIATS-AS); the Child Engagement in Daily Life (CEDL) questionnaire; and a qualitative assessment from diary/log and semi-structured interviews. Ten children (median 3 years, range 9 months to 7 years). Baseline to follow-up median (IQR) FIATS-AS were: 22.7 (9.3) and 30.3 (10.2), respectively (p=.002). Similarly mean (SD) CEDL scores for "frequency" changed from 30.5 (13.2) to 42.08 (5.96) (p=.021) and children's enjoyment scores from 2.23 (0.93) to 2.91 (0.79) (p=.019). CEDL questionnaire for self-care was not discriminatory; seven families scored zero at both baseline and 6 months. Qualitative interviews revealed three key findings; that APT improved functional ability, involvement/interaction in daily-life situations, and a reduced family burden of care. APT devices used in Kenyan children with non-ambulant CP had a meaningful positive effect on both the children's and their families' lives. Assistive devices are often unobtainable for children with cerebral palsy (CP) in low-income countries. APT is a low cost and sustainable solution to make seating and standing devices for disabled children in Kenya. The regular use of a postural support device enhanced the children's motor skills, ability to function and participate in everyday activities, reduced the burden of care for the families and promoted the children's social interaction. The postural support devices were highly valued and utilised by the children and families in this study. [ABSTRACT FROM AUTHOR]

Describes study that was designed to compare student achievement scores from three different testing methods: paper-administered testing, computer-administered testing, and computerized adaptive testing. The California Assessment Program (CAP) item banks for grades three and six which this study incorporated are described, and results are analyzed. (43 references) (LRW)

Objective: The medical record is critical for documentation and communication between healthcare professionals. This study compared the completeness of orthopaedic documentation between the electronic medical record (EMR) and paper medical record (PMR). Methods: A review was undertaken of 400 medical records (200 EMR, 200 PMR) of patients with operatively managed traumatic lower limb injury. The operative report, discharge summary and first and second out-patient reviews were evaluated using criteria designed by a senior orthopaedic surgeon and senior physiotherapist. The criteria included information deemed critical to the post-operative care of the patient in the first 6 weeks post-surgery. Results: In all cases, an operative report was completed by a senior surgeon. Notable findings included inferior documentation of patient weight-bearing status on the operative report in the EMR than PMR group (P = 0.018). There was a significant improvement in the completion of discharge summaries in the EMR compared with PMR cohort (100% vs 82.5% respectively; P < 0.001). In the PMR group, 70.0% of discharge summaries were completed and adequately documented, compared with 91.5% of those in the EMR group (P < 0.001). At out-patient review, there was an improvement in documentation of weight-bearing instructions in the EMR compared with PMR group (81.1% vs 76.2% respectively; P = 0.032). Conclusion: The EMR is associated with an improvement in the standard of orthopaedic medical record documentation, but deficiencies remain in key components of the medical record. What is known about the topic?: Medical records are an essential tool in modern medical practice and have significant implications for patient care and management, communication and medicolegal issues. Despite the importance of comprehensive documentation, numerous examples of poor documentation continue to be demonstrated. Recently, significant changes to the medical record in Australia have been implemented with the conversion of some hospitals to an EMR and the implementation of the My Health Record. What does this paper add?: Standards of patient care should be monitored continuously and deficiencies identified in order to implement measures for improvement and to close the quality loop. This study has highlighted that although there has been improvement in medical record keeping with the implementation of an EMR, the standard of orthopaedic medical record keeping continues to be below what is expected, and several key areas of documentation require improvement. What are the implications for practitioners?: The implications of these findings for practitioners are to highlight current deficiencies in documentation and promote change in current practice to improve the quality of medical record documentation among medical staff. Although the EMR has improved documentation, there remain areas for further improvement, and hospital administrators will find these observations useful in implementing ongoing change. [ABSTRACT FROM AUTHOR]

Research on soil microplastics is currently at an early stage, and there is no widely approved sampling protocol. Even so, any basic research should minimize errors to ensure that they are not amplified in future research. This paper examines some weaknesses of the original research paper 'Soil microplastic pollution under different land uses in tropics, southwestern China' recently published in this journal. The authors neglected to report the equipment used for soil sampling and did not use field blank samples. There is also a soil layer that was incorrectly named. The type and pore size of filter paper used for filtration during pre-analytical soil sample preparation is very important. In this paper the nature of the filter paper used, and its larger pore sizes are questionable by today's scientists. In addition, the authors in the original paper also overlooked reporting the statistical package used for statical analysis and ensuring if all data sets obey normality, homogeneity, and equality before running the one-way ANOVA test. This statistical step is widely considered mandatory, especially in the soil science community. So, this makes it difficult to trust the results documented. Furthermore, in the original paper, the needle and stereo microscope instruments used to sort microplastic-like materials prior to proper analysis are not reliable. [Display omitted] • A dissecting needle and stereo microscope shouldn't be used to sort out soil microplastics. • Gold-coated filter paper with smaller pore size is better than nitrocellulose filter paper. • The 0–10cm is the top soil layer and 10–20cm is the subsoil layer not a deep soil layer. • The statistical package used for analysis must be documented accordingly. • If the dataset is a normal distribution prior to ANOVA testing, it must be confirmed and reported. [ABSTRACT FROM AUTHOR]