Search

This study aims to produce Fe2.9wt.%Si ferromagnetic material via laser powder bed fusion (L-PBF) for the realization of electromagnetic actuators (EMA). This study is necessary as there are no documents in scientific literature regarding the manufacturing of Iron-Silicon plungers using the L-PBF additive manufacturing (AM) technique. The microstructure, and magnetic properties were characterized using various techniques. The results indicate that the samples produced via L-PBF process exhibit good magnetic properties ( $\mu = 748, H_{C}= 87.7 [A/m]$ ) especially after annealing treatment at 1200° C for 1h ( $\mu = 3224, H_{C}= 69.1 [A/m] $ ), making it a promising material for use in electromagnetic actuators.

Brakes are essential parts of any system that involves motion. A few seconds are spent applying the brake, accumulating enough force to retard a system. In case of emergency stops, we need an efficient braking system that acts quickly and safely to avoid any mishaps. This work aims to develop a prototype of an instantaneous braking system, which can stop the motion of a rotating member. The operating principle of the device is the electromagnetic actuation of a solenoid. The actuation of a solenoid is simple and instantaneous. As a result, we could achieve immediate braking of a rotating member.

Brakes are essential parts of any system that involves motion. A few seconds are spent applying the brake, accumulating enough force to retard a system. In case of emergency stops, we need an efficient braking system that acts quickly and safely to avoid any mishaps. This work aims to develop a prototype of an instantaneous braking system, which can stop the motion of a rotating member. The operating principle of the device is the electromagnetic actuation of a solenoid. The actuation of a solenoid is simple and instantaneous. As a result, we could achieve immediate braking of a rotating member. [ABSTRACT FROM AUTHOR]

The article presents the discussion on investigation in a designed and modified standard automatic transmission for a 2017 Yamaha Grizzly All-Terrain Vehicle. Topics include developing a vehicle being used in the Australian outback for controlling and eradicating weeds; determining the performance parameters required for replacing the movement supplied by the operator; and improving productivity, profitability, and reducing the man time for performing tedious tasks such as spraying weeds.

A compact sensor for physically sorting bioaerosols based on fluorescence spectra from single particles excited using arrays of ultraviolet light emitting diodes (UV LEDs) is presented. The optical system integrates electronics for real-time processing of spectral data and a miniaturized aerodynamic deflector for particle separation. Fluorescent polystyrene latex spheres are used to demonstrate fluorescence collection on-the-fly, operation of a real-time spectral algorithm, and physical separation of individual particles. This sensor illustrates the utility of recently developed UV LEDs, in conjunction with novel optical design and custom electronics, to shrink the size of aerosol fluorescence detection systems. [ABSTRACT FROM AUTHOR]

This paper looks at the collaborative design activity involved in a design experiment of an electromechanical plunger. Much of the coordination was achieved through internet-based communication. As mechanical and electrical researchers involved in the design project, we discuss the information exchanges highlighted by our different professional cultures and relate how these exchanges lead us to propose some methodology to improve the efficiency of virtual meetings. Moreover, we show the need for new communication tools, ones dedicated to specific tasks that are not currently supported, especially shared concept formalization among technical experts. [ABSTRACT FROM AUTHOR]

Isoporous membranes can be prepared by a combination of self-assembly of amphiphilic block copolymers and the non-solvent induced phase separation process. As the general doctor-blade technique suffers from high consumption of expensive block copolymer, other methods to reduce its concentration in the casting solution are sought after. Decreasing the block copolymer concentration during membrane casting and applying the block copolymer solution on a support membrane to obtain ultrathin isoporous membrane layers with e.g., spraying techniques, can be an answer. In this work we focused on the question if upscaling of thin block copolymer membranes produced by spraying techniques is feasible. To upscale the spray coating process, three different approaches were pursued, namely air-brush, 1-fluid nozzles and 2-fluid nozzles as generally used in the coating industry. The different spraying systems were implemented successfully in a membrane casting machine. Thinking about future development of isoporous block copolymer membranes in application it was significant that a continuous preparation process can be realised combining spraying of thin layers and immersion of the thin block copolymer layers in water to ensure phase-separation. The system was tested using a solution of polystyrene-block-poly(4-vinylpyridine) diblock copolymer. A detailed examination of the spray pattern and its homogeneity was carried out. The limitations of this method are discussed. [ABSTRACT FROM AUTHOR]

Presents information on a study which described a finite element scheme for colliding meshes. Overlapping meshes; Results of the study; Conclusions.

Focuses on technological advancement in electronic voice aids or artificial larynx (AL). Types of AL; Use of space age materials to improve type of machine; Changes on power sources of AL devices.