Search

The ultra-small spacing tunnel is a new tunnel type under the urban engineering environment, which not only has high requirements for deformation and settlement control, but also has great difficulty in construction technology. Since the middle rock pillar is the key part in the design and construction of ultra-small spacing tunnels, to explore the stability of the middle rock pillar in the ultra-small spacing (0-200 mm) subway tunnels, this study examined the Gangding-Shipaiqiao ultra-small spacing tunnels on Guangzhou Metro Line 3 in China by using ABAQUS and theoretical analysis, which mainly involved the plastic zone of the surrounding rock, the stress distribution and skew displacement effect of the middle rock pillar by defining the skew coefficient. The tunnel cross-sections of three different types were optimized, and a simplified calculation method was proposed with the load and ultimate bearing capacity of the middle rock pillar. Results show that the theoretical analysis of the bearing capacity of the middle rock pillar is essentially consistent with the results of numerical calculation. The conclusions obtained in the study are of important theoretical value to provide on-site engineering construction guidance. [ABSTRACT FROM AUTHOR]

GPS radio occultation (RO) technology can fully describe the subtle structure of the ionosphere. This paper discusses the dynamic abnormity observed by the RO data from the Constellation Observing System for Meteorology Ionosphere and Climate (FORMOSAT-3/COSMIC) before the great earthquake case in Concepcion, Chile (27 February 2010, Mw 8.8). Traditional ground-based GPS monitoring was considered as the external conditions and references to the excitation response. Using kriging interpolation, the global Nmf2 map (GNM) was first constructed to study the ionosphere deviation from the normal state. Successively, the ionosphere abnormality in the F2 region (Nmf2), vertical structure (RO profiles), and multiple heights (electron density) of traveling are unfolded. The Nmf2 disturbances in the possibility of seismic influences were excluded from non-seismic noise factors, including the external input (e.g., space weather activity, 15 February) and meteorological events (e.g., lower atmospheric forcing in quiet periods). However, the results show that there were apparent local Nmf2 perturbations for up to 5 h in the epicenter area on 21 and 25 February. The disturbances of the RO profiles and the interaction of other layers of the ionosphere implied the fluctuation signals of prominent long-wavelength fluctuations >50 km in the F layer. The ionospheric fluctuates wildly, and these wave signals considered as the trace of gravity wave propagating upward are mainly distributed at the elevation of 200–300 km. The simultaneous reaction of GNSS TEC further evidenced the potential possibility of acoustic gravity by the COSMIC RO profiles, reflecting the compounding couplings of seismo-ionosphere effects. In terms of the presentation of VLF radiation noise and the aerosol ion clusters, the electromagnetic and chemical channels have been previously completed by DEMETER and Terra/Aqua satellites. These findings implied the great potential of the FORMOSAT-7/COSMIC-2 system (now in the testing phase), with ~5000 soundings to investigate the subtle atmospheric stratification. [ABSTRACT FROM AUTHOR]

The Tonga volcano erupted on 15 January 2022, at 04:15:45 UTC, which significantly influenced the atmosphere and space environment, at the same time, an unprecedented opportunity to monitor ionospheric anomalies is provided by its powerful eruption. In current studies of traveling ionospheric disturbance (TID) triggered by the 2022 Tonga volcanic eruption, the particular phenomenon of ionospheric disturbances in various parts of the world has not been reasonably explained, and the vertical ionospheric disturbances are still not effectively detected. In this paper, we calculate the high-precision slant total electron content (STEC) from more than 3000 ground-based GPS stations distributed around the world, then we obtain the radio occultation (RO) data from near-field COSMIC-2 profiles and investigate the horizontal TID and the vertical ionospheric disturbances by the singular spectrum analysis (SSA). Horizontal TID propagation captured by GPS STEC results indicates that acoustic-gravity waves dominate the energy input at the beginning of the ionospheric disturbance with an approximate speed of 1050 m/s initially. With the dissipation of the shock energy, lamb waves become a dominant mode of ionospheric disturbances, moving at a more stable speed of about 326 m/s to a range of 16,000 km beyond the far-field. Local characteristics are evident during the disturbance, such as the ionospheric conjugation in Australia and the rapid decay of TID in Europe. The shock-Lamb-tsunami waves' multi-fluctuation coupling is recorded successively from the COSMIC-2 RO observation data. The shock and Lamb waves can perturb the whole ionospheric altitude. In contrast, the disturbance caused by tsunami waves is much smaller than that of acoustic-gravity waves and Lamb waves. In addition, influenced by the magnetic field, the propagation speed of TID induced by Lamb waves is higher towards the northern hemisphere than towards the southern hemisphere. [ABSTRACT FROM AUTHOR]

In order to study the coupling relationship between large earthquakes and the ionosphere, the techniques of ionosphere data acquisition were refined by the Crustal Movement Observation Network of China (CMONOC) to detect the pre-earthquake ionospheric abnormal and coseismic ionospheric disturbances (CID) of the Mw 6.6 Lushan earthquake on 20 April 2013. Based on the regional ionosphere maps (RIMs) derived from the Global Positioning System (GPS) observations of CMONOC, the ionospheric local effects near the epicenter of the Lushan earthquake one month prior to the shock were analyzed. The results show that the total electron content (TEC) anomalies appeared 12–14 (6–8 April), 19 (1 April), and 25–27 (24–26 March) days prior to the Lushan earthquake, which are defined as periods 1, 2, and 3, respectively. Multi-indices including the ring current index (Dst), geomagnetic planetary (Kp) index, wind plasma speed (Vsw) index, F10.7, and solar flares were utilized to represent the solar–terrestrial environment in different scales and eliminate the effects of solar and geomagnetic activities on the ionosphere. After the interference of solar–terrestrial activity and the diurnal variation in the lower thermosphere were excluded, the TEC variations with obvious equatorial ionospheric anomaly (EIA) in period-1 were considered to be related to the Lushan earthquake. We further retrieved precise slant TECs (STECs) near the epicenter to study the coseismic ionospheric disturbance (CID). The results show that there was clear STEC disturbance occurring within half an hour after the Lushan earthquake, and the CID propagation distance was less than the impact radius of the Lushan earthquake (689 km). The shell models with different altitudes were adopted to analyze the propagation speed of the CID. It is found that at the F2-layer with the altitude of 277 km, which had a CID horizontal propagation velocity of 0.84 ± 0.03 km/s, was in accordance with the acoustic wave propagation velocity. The calculated velocity acoustic wave from the epicenter to the ionospheric pierce points of this shell model was about 0.53 ± 0.03 km/s, which was also consistent with its actual velocity within the altitude of 0–277 km. Affected by the geomagnetic field, the CID mainly propagated along the southeast direction at the azimuth of 190°, which was almost parallel to the local magnetic line. [ABSTRACT FROM AUTHOR]

The mechanism for the hydroxyl-radical-induced depolymerization of cellulose under alkaline conditions in air was investigated using density functional theory at the B3LYP/6-31+G(d,p) level as well as electron transfer theory. The pathway for the depolymerization of cellulose was obtained theoretically and H abstraction from the C(3) atom of the pyran ring during the cleavage of the glucosidic bond was found to be the rate-limiting step due to its high energy barrier (16.81 kcal/mol) and low reaction rate constant (4.623 × 104 mol L−1 s−1). Calculations of the electron transfer between O2 and the saccharide radical performed with the HARLEM software package revealed that following the H abstraction, the oxygen molecule approaches C(2) on the saccharide radical and obtains an electron from the radical, even though no bond forms between the oxygen molecule and the radical. The rate constant for electron transfer could be as high as 1.572 × 1011 s−1. Furthermore, an enol intermediate is obtained during the final stage of the depolymerization. [ABSTRACT FROM AUTHOR]

Fractured reservoirs are highly heterogeneous in both matrix and fracture properties, which results in significant variations in well production. Assessing and quantifying the influence of fractures on fluid flow is essential for developing unconventional reservoirs. The complicated effects of fractures in unconventional fractured reservoirs on fluid flow highly depend on fracture geometry, fracture distribution, and fracture properties, which can be reflected in pressure transient testing. The biggest challenge lies in delineating the pre-existing natural fracture distribution pattern, density, azimuth, and connectivity. Using the advanced finite element method, this paper builds a finely characterized near-wellbore model to numerically simulate the pressure transient testing process in naturally fractured reservoirs and further evaluates fracture-related effects to obtain a more accurate solution. First, the numerical program is benchmarked by the analytical solutions and numerical results of Eclipse. Next, different fracture models with single fractures or fracture networks are set up to investigate the effects of fracture parameters numerically (e.g., fracture location, fracture dip angle, fracture spacing, the ratio of fracture permeability to matrix permeability, fracture network orientation, horizontal fracture distribution, etc.) on pressure transient behaviors in naturally fractured reservoirs. Velocity and pressure profiles are presented to visualize and analyze their effects, and new features in the flow regimes of the derivative plots of the bottom-hole pressure are identified and discussed. Finally, based on geological and geophysical data, including image logs, core descriptions, wireline logs, and seismic and well test data, a practical fractured model of the Dalwogan 2 well in the Surat basin is built, analyzed, and compared with homogenous and measured data. The results show significance in characterizing the complex fracture networks in near-wellbore models of unconventional fractured reservoirs. [ABSTRACT FROM AUTHOR]

Frequency shift islanding detection methods have been widely used in inverter-based distributed generations. Two representatives of such methods, Sandia frequency shift (SFS) and reactive current perturbation (RCP) methods, are investigated in this article. The investigation reveals two main issues with these two methods, i.e., parameter selection scheme for positive feedback gain and current static error. The current parameter selection scheme, in particular, is considered unreliable and inconvenient in this article, for it has not considered the weakening effect of PI regulators on positive feedback and the positive feedback gain is actually obtained by trial and error, which makes it difficult to use such methods well in field environments. In view of these issues, this article proposes a solution that contains an improved method to eliminate current static error and a reliable and convenient parameter selection scheme based on system stability analyses. The final simulations and experiments verify the good performance of the improved method and the parameter selection scheme. [ABSTRACT FROM AUTHOR]

This paper first derives a usable formula for frequency shift islanding detection methods on the basis of the parallel R, L, C load and the conclusions in current literature: the angle by which the total output current of the distributed resources (DR) units leads the point of common coupling (PCC) voltage must be conducted to have the same shifting direction as the load admittance angle during the variation of the frequency. According to the formula and multi-DR operation, the scenarios in which the classic frequency shift methods are applied to energy storage converters are analyzed. The results indicate that the setting of the angle by which the energy storage converter current leads the PCC voltage may need to be modified when running state changes. It results in the problems that the classic methods are not applicable for non-unity power factor (non-UPF) control and have to distinguish between generation mode and consumption mode for UPF control. On account of the problems, a coping strategy, i.e., an improved method, is proposed. The analyses indicate that the improved method is applicable in every state. The last simulations and experiments confirm the preceding conclusions. [ABSTRACT FROM AUTHOR]

The Mw7.9 Alaska earthquake at 09:31:40 UTC on 23 January 2018 occurred as the result of strike slip faulting within the shallow lithosphere of the Pacific plate. Global positioning system (GPS) data were used to calculate the slant total electron contents above the epicenter. The singular spectrum analysis (SSA) method was used to extract detailed ionospheric disturbance information, and to monitor the co-seismic ionospheric disturbances (CIDs) of the Alaska earthquake. The results show that the near-field CIDs were detected 8–12 min after the main shock, and the typical compression-rarefaction wave (N-shaped wave) appeared. The ionospheric disturbances propagate to the southwest at a horizontal velocity of 2.61 km/s within 500 km from the epicenter. The maximum amplitude of CIDs appears about 0.16 TECU (1TECU = 1016 el m−2) near the epicenter, and gradually decreases with the location of sub-ionospheric points (SIPs) far away from the epicenter. The attenuation rate of amplitude slows down as the distance between the SIPs and the epicenter increases. The direction of the CIDs caused by strike-slip faults may be affected by the horizontal direction of fault slip. The propagation characteristics of the ionospheric disturbance in the Alaska earthquake may be related to the complex conditions of focal mechanisms and fault location. [ABSTRACT FROM AUTHOR]

Islanding detection methods, based on injecting high-/low-frequency currents or negative sequence fundamental frequency currents and observing the resultant responses, are collectively referred to as irregular current injection methods in this paper. In multi-distributed generation (DG) operation, if there is no restriction to the phase of injected irregular currents, the currents at the same frequency may cancel each other out, and then their convergent current may be too small to cause a detectable response, for which reason islanding detection will be severely affected. Accordingly, this paper raises a compatibility issue, which requires the phase difference between any two injected irregular currents to be within a certain interval. In response to this issue, a solution is proposed. According to this solution, the terminal voltage of DG units is referenced to conduct irregular currents injection, and only certain high-frequency currents are used as injected currents. If this solution is adopted by as many manufacturers as possible, the effect and reliability of such methods will be greatly improved. [ABSTRACT FROM AUTHOR]

One class of islanding detection methods, known as impedance measurement-based methods and voltage change monitoring-based methods, are implemented through injecting irregular currents into the network, for which reason they are defined in this paper as irregular current injection methods. This paper indicates that such methods may be affected by distributed generation (DG) unit cut-in events. Although the network impedance change can still be used as a judgment basis for islanding detection, the general impedance measurement scheme cannot separate island events from DG unit cut-in events in multi-DG operation. In view of this, this paper proposes a new islanding detection method based on an improved impedance measurement scheme, i.e., dynamic impedance measurement, which will not be affected by DG unit cut-in events and can further assist some other equipment in islanding detection. The simulations and experiments verify the stated advantages of the new islanding detection method. [ABSTRACT FROM AUTHOR]