Search

Using abandoned gas wells as geothermal resources for energy production is an effective way to extract geothermal energy from geological formations. These abandoned wells have the potential to significantly contribute in the rising global demand for energy without requiring the land disruption resulting from deep drilling or digging, processes necessary for energy extraction from geological formations via more traditional methods. In this paper, a method to extract geothermal energy from abandoned gas wells is proposed. The method offers an efficient, economical, and environmentally-conscious way to generate electricity. A mathematical model of a thermal and hydraulic coupling process is constructed, and a 3D numerical model is generated to study the process of geothermal energy extraction by retrofitting an abandoned gas reservoir into a geothermal reservoir. Using the model, heat extraction and fluid flow are analyzed over a period of 50 years. The heat production, electricity generation, and thermal recovery over the lifetime of the reservoir indicate that a commercially viable geothermal dual well system can produce geothermal energy effectively. Dual-well systems contain at least one injection well and one production well. They are composed of a two-way flow system in which the fluid flows into the reservoir via an injection well and returns from the production well having absorbed thermal energy from the surrounding rocks. Sensitivity analysis of the main parameters controlling the average outlet temperature of the fluid from the sedimentary geothermal system reveals that abandoned gas wells are a suitable source of geothermal energy. This energy can be harvested via a method whose use of reservoir fluids differs from that of the traditional method of closed-loop circulation via a borehole heat exchanger. Here, it is demonstrated that abandoned oil and gas fields can be repurposed to be geothermal energy sources that provide low-cost electricity and are economically sustainable. [ABSTRACT FROM AUTHOR]

Objective: To investigate the cost differences between magnetic resonance-guided focussed ultrasound (MRgFUS) and unilateral deep brain stimulation (DBS) for the treatment of medication-refractory essential tremor (ET) in Japan using a cost-minimisation model. Methods: A cost-minimisation model estimated total costs for MRgFUS and unilateral DBS by summing the pre-procedure, procedure, and post-procedure costs over a 12-month time horizon, using data from published sources and expert clinical opinion. The model base case considered medical costs from fee-for-service tariffs. Scenario analyses investigated the use of Diagnosis Procedure Combination tariffs, a diagnosis-related group-based fixed-payment system, and the addition of healthcare professional labour costs healthcare professionals using tariffs from the Japanese Health Insurance Federation for Surgery. One-way sensitivity analyses altered costs associated with tremor recurrence after MRgFUS, the extraction rate following unilateral DBS, the length of hospitalisation for unilateral DBS and the procedure duration for MRgFUS. The impact of uncertainty in model parameters on the model results was further explored using probabilistic sensitivity analysis. Results: Compared to unilateral DBS, MRgFUS was cost saving in the base case and Diagnosis Procedure Combination cost scenario, with total savings of JPY400,380 and JPY414,691, respectively. The majority of savings were accrued at the procedural stage. Including labour costs further increased the cost differences between MRgFUS and unilateral DBS. Cost savings were maintained in each sensitivity analysis and the probabilistic sensitivity analysis, demonstrating that the model results are highly robust. Conclusions: In the Japanese healthcare setting, MRgFUS could be a cost saving option versus unilateral DBS for treating medication-refractory ET. The model results may even be conservative, as the cost of multiple follow-ups for unilateral DBS and treatment costs for adverse events associated with each procedure were not included. This model is also consistent with the results of other economic analyses of MRgFUS versus DBS in various settings worldwide. [ABSTRACT FROM AUTHOR]

Noise is considered as one of the challenging problems in big cities. However, this noise could be utilized in producing energy especially in dense urban areas. Sound as a form of mechanical energy, it can be converted to electric energy through many approaches including heating, by using the diaphragm and through using piezoelectric materials. This research aims at utilizing noise through using piezoelectric materials as an approach of conversion to produce green sustainable electric energy that can be used to decrease the energy consumption from non-renewable sources and utilizing this energy in street lighting. The study was carried in three bus stations in Alexandria by having measurements during weekdays and weekends in order to study the noise produced in the selected stations and the amount of electric energy that could be produced and utilized in street lighting. The noise level index LDEN was calculated for each of the three selected locations. The equivalent noise level values were always exceeding the limits through the day, evening and night. At daytime they ranged between 75–85 dB which is higher that the permissible limit by 10–20 dB, at evening they ranged from 80–85 dB which is also higher than the permissible limit with 20–25 dB and at the night they ranged from 75–80 dB which is higher by 20–25 dB than the permissible limit. The research concluded that utilizing noise using the piezoelectric material is successful. The electric energy produced from an area of 1.45 m2 containing 690 piezoelectric QB220-503YB transducers at each of the selected stations was about 0.024 watt hr. This amount of electric energy is too small to be used in an application. So the application area should be maximized to hundreds of square meters to produce beneficial electric energy that can be used in lighting 1 LED street lamp or it can be stored and used when needed in applications that use greater amount of electric energy and this would help in reducing the energy consumed. [ABSTRACT FROM AUTHOR]

The Sustainable Energy Development Authority of Malaysia (SEDA) regularly receives complaints about damaged components and distribution boards of PV systems due to lightning strikes. Permanent and momentary interruptions of distribution circuits may also occur from the disturbance. In this paper, a solar PV Rooftop system (3.91 kWp) provided by SEDA was modelled in the PSCAD/EMTDC. The Heidler function was used as a lightning current waveform model to analyse the transient current and voltage at two different points susceptible to the influence of lightning events such as different lightning current wave shape, standard lightning current and non-standard lightning current. This study examines the effect on the system components when lightning directly strikes at two different points of the installation. The two points lie between the inverter and the solar PV array and between inverter and grid. Exceptionally high current and voltage due to the direct lightning strike on a certain point of a PV Rooftop system was also studied. The result of this case study is observed with and without the inclusion of surge protective devices (SPDs). The parameters used were 31 kA of peak current, 10 metres cable length and lightning impulse current wave shape of 8/20μs. The high current and voltage at P1 striking point were 31 kA and 2397 kV, respectively. As for the AC part, the current and voltage values were found to be 5.97 kA and 5392 kV, respectively.Therefore, SPDs with suitable rating provided by SEDA were deployed. Results showed that high transient current voltage is expected to clamp sharply at the values of 1.915 kV and 0 A at the P1 striking point. As for the AC part, the current and voltage values were found to be 0 kA and 0.751 V, respectively. Varying lightning impulse current wave shapes at striking point P2 showed that the highest voltage was obtained at waveshape 10/350 μs at 11277 kV followed by wave shapes of 2/70 μs, 8/20 μs and 0.7/6 μs. The high value of transient voltage was clamped at a lower level of 2.029 kV. Different lightning amplitudes were also applied, ranging from 2–200 kA selected based on the CIGRE distribution. It showed that the current and voltage at P1 and P2 were directly proportional. Therefore, the SPD will be designed at an acceptable rating and proper position of SPD installation at solar PV Rooftop will be proposed. The results obtained in this study can then be utilised to appropriately assign a SPD to protect the PV systems that are connected to the grid. Installing SPDs without considering the needs of lightning protection zones would expose the expensive equipment to potential damage even though the proper energy coordination of SPDs is in place. As such, the simulation results provide a basis for controlling the impacts of direct lightning strikes on electrical equipment and power grids and thus justify SPD coordination to ensure the reliability of the system. [ABSTRACT FROM AUTHOR]

Background: Residential density was found to be associated with excess body weight among adults in Western societies but it remains unclear in China. We aimed to explore the relationship between residential density and excess body weight among adults in China. Methods: This cross-sectional study was conducted in 2017 in urban areas of Nanjing, China. A multi-stage sampling method was used to randomly select participants aged 35–74 years from 8 urban neighborhoods in Nanjing. Status of excess body weight was the outcome variable which was categorized as "yes (BMI≥24)" or "no (BMI<24)" according to specific recommendations for Chinese adults. Residential density was the main explanatory variable which was grouped into tertiles. Odds ratios (OR) and 95% confidence interval (CIs) were calculated to assess the relationship between residential density and excess body weight using mixed-effects regression models after adjusting for age, sex, education, occupation, marital status, redmeat, smoking, physical activity, diabetic status and potential neighborhood-level clustering effect. Results: A total of 1551 participants were recruited with a response rate of 98.9% (1551/1568). The mean age (standard deviation) of participants was 54.7 (11.1) years, and 46% of them were men. With adjustment for potential influential factors, participants in neighborhoods with lower (OR = 1.38, 95% CI = 1.06–1.81) and middle (OR = 1. 29, 95% CI = 1. 01, 1. 64) tertile of residential density were at significantly higher risk of gaining excess body weight relative to their counterparts in communities with upper tertile of residential density. Such a negative association between residential density and excess body weight was observed for men only after stratified analysis by gender. Conclusions: A negative association between residential density and excess body weight was identified in overall and male urban Chinese adults, and the association was independent of physical activity. Results of our study have important implications in guiding public health policy making regarding prevention of excess body weight at community level via establishment of health-friendly neighborhood environment in China. [ABSTRACT FROM AUTHOR]

In fish, the circadian clock represents a key regulator of many aspects of biology and is controlled by combinations of abiotic and biotic factors. These environmental factors are frequently manipulated in fish farms as part of strategies designed to maximize productivity. The flatfish turbot, Scophthalmus maximus, represents one of the most important species within the aquaculture sector in Asia and Europe. Despite the strategic importance of this species, the function and regulation of the turbot circadian system remains poorly understood. Here, we have characterized the core circadian clock genes, clock1, per1, per2 and cry1 in turbot and have studied their daily expression in various tissues under a range of lighting conditions and feeding regimes. We have also explored the influence of light and feeding time on locomotor activity. Rhythmic expression of the four core clock genes was observed in all tissues studied under light dark (LD) cycle conditions. Rhythmicity of clock gene expression persisted upon transfer to artificial free running, constant conditions confirming their endogenous circadian clock control. Furthermore, turbot showed daily cycles of locomotor activity and food anticipatory activity (FAA) under LD and scheduled-feeding, with the activity phase as well as FAA coinciding with and being dependent upon exposure to light. Thus, while FAA was absent under constant dark (DD) conditions, it was still detected in constant light (LL). In contrast, general locomotor activity was arrhythmic in both constant darkness and constant light, pointing to a major contribution of light, in concert with the circadian clock, in timing locomotor activity in this species. Our data represents an important contribution to our understanding of the circadian timing system in the turbot and thereby the optimization of rearing protocols and the improvement of the well-being of turbot within fish farming environments. [ABSTRACT FROM AUTHOR]

Temperature can be a major factor for the distribution of insects, especially among invasive insects. Sirex noctilio (Hymenoptera: Siricidae) has invaded many regions in China, causing enormous ecological and economic losses. We aimed to explore the trend and potential of diffusion by researching the thermal survival limits of S. noctilio. We measured the supercooling point (SCP), critical thermal temperature (CTmax), high lethal temperature (HLT) and low lethal temperature (LLT) for S. noctilio population in China and assessed life stage-related variation in thermal tolerance. Moreover, we determined the temperature tolerance range of S. noctilio and identified the temperature parameters for its potential invasive distribution risk analysis. The SCP of adults was -11.78 ± 0.67 (mean ± SEM), the CTmax was 37.67 ± 0.54, and those of larvae were -20.77 ± 0.44 and 40.53 ± 0.27, respectively. The LLT increased with exposure time, and the HLT was generally near 43°C. S. noctilio adults can tolerate higher temperatures than larvae, and the larvae showed high resistance to cold temperature. We calculated several temperature indexes based on our results, such as the lower temperature threshold (DV0) at -2.7°C, the upper temperature threshold (DV3) at 31°C, the temperature threshold for both heat stress (TTHS) at 35°C and cold stress (TTCS) at -32.5°C. We observed that, S. noctilio was not resistant to high temperatures, its CTmax is slightly lower than the lethal temperature, and the adults were more tolerant than larvae. Our next goal was to combine the temperature tolerance of symbiotic fungi, information on climate change and the current distribution of this species to predict its potential global distribution. [ABSTRACT FROM AUTHOR]

Background: Despite perennial sunshine, vitamin D deficiency is prevalent among Malaysians especially pregnant women. This study determines the vitamin D status and its associated factors among third trimester pregnant women attending government health clinics in Selangor and Kuala Lumpur, Malaysia. Methods: Information on socio-demographic characteristics, obstetrical history, and sun exposure were obtained through face-to-face interviews. Vitamin D intake was assessed using a semi-quantitative food frequency questionnaire (FFQ). Serum 25-hydroxyvitamin D concentration was measured and classified as deficient (< 30 nmol/L), insufficient (30–50 nmol/L), and sufficient (≥ 50 nmol/L). Results: Of the 535 pregnant women recruited, 42.6% were vitamin D deficient. They consumed an average of 8.7 ± 6.7 μg of vitamin D daily. A total of 80.4% of the vitamin D were obtained from the food sources, while 19.6% were from dietary supplements. Fish and fish products showed the highest contribution to vitamin D intake (35.8%). The multivariable generalized linear mixed models, with clinic as a random effect, indicates that higher intake of vitamin D is associated with lower odds of vitamin D deficiency among pregnant women (OR = 0.96; 95% CI = 0.93–0.99). The odds of having vitamin D deficiency was reduced by 87% in non-Malays (OR = 0.14; 95% CI = 0.05–0.41) compared to Malays. No associations were found between age, educational level, monthly household income, work status, gravidity, parity, pre-pregnancy body mass index, total hours of sun exposure, total percentage of body surface area, and sun exposure index per day with vitamin D deficiency. Conclusion: Vitamin D deficiency is prevalent among Malaysian pregnant women. Considering the possible adverse obstetric and fetal outcomes of vitamin D deficiency during pregnancy, future nutrition education should emphasise on vitamin D-fortified foods consumption among pregnant women by taking into consideration ethnic differences. [ABSTRACT FROM AUTHOR]

This paper develops two-stage inverse data envelopment analysis models with undesirable outputs to formulate resource plans for 16 Chinese listed commercial banks whose outputs are increased and overall efficiency is kept unchanged in the short term. We use these models to meet three different output targets, namely, increasing both the desirable and undesirable outputs by the same percentage, increasing these outputs by different percentages, and increasing only the desirable outputs while keeping the undesirable outputs unchanged. We find that operation cost and interest expense are more flexible than labor in the adjustment process and that deposits have no obvious law of change. The findings of this work provide some suggestions for bank managers. [ABSTRACT FROM AUTHOR]

The Nankai Trough in Japan has been identified as a geological feature that could cause extensive damage in the event of a major earthquake. In this study, we investigated the impact of effective guidance signs for hearing-impaired individuals requiring special care when escaping to a tsunami evacuation building (emergency evacuation location) using geographical information system (GIS) and viewshed analysis. We selected an area we considered would suffer severe damage following a major earthquake and tsunami; we identified difficulties in the provision of escape routes. Using GIS, we determined the time required for escape and tsunami arrival time if effective signs were installed; we undertook such analysis using the height data of buildings in the target area. With effectively installed guidance signs, the average required evacuation time was 36.88 minutes; without such signs (which is currently the case in the target area), the average time was 47.10 minutes: that would result in citizens getting caught by the tsunami. Installing effective guidance signs would allow hearing-impaired individuals to escape to an evacuation building before being hit by the tsunami. [ABSTRACT FROM AUTHOR]

Accurately predicting reference evapotranspiration (ET0) with limited climatic data is crucial for irrigation scheduling design and agricultural water management. This study evaluated eight machine learning models in four categories, i.e. neuron-based (MLP, GRNN and ANFIS), kernel-based (SVM, KNEA), tree-based (M5Tree, XGBoost) and curve-based (MARS) models, for predicting daily ET0 with maximum/maximum temperature and precipitation data during 2001–2015 from 14 stations in various climatic regions of China, i.e., arid desert of northwest China (NWC), semi-arid steppe of Inner Mongolia (IM), Qinghai-Tibetan Plateau (QTP), (semi-)humid cold-temperate northeast China (NEC), semi-humid warm-temperate north China (NC), humid subtropical central China (CC) and humid tropical south China (SC). The results showed machine learning models using only temperature data obtained satisfactory daily ET0 estimates (on average R2 = 0.829, RMSE = 0.718 mm day−1, NRMSE = 0.250 and MAE = 0.508 mm day−1). The prediction accuracy was improved by 7.6% across China when information of precipitation was further considered, particularly in (sub)tropical humid regions (by 9.7% in CC and 12.4% in SC). The kernel-based SVM, KNEA and curve-based MARS models generally outperformed the others in terms of prediction accuracy, with the best performance by KNEA in NWC and IM, by SVM in QTP, CC and SC, and very similar performance by them in NEC and NC. SVM (1.9%), MLP (2.0%), MARS (2.6%) and KNEA (6.4%) showed relatively small average increases in RMSE during testing compared with training RMSE. SVM is highly recommended for predicting daily ET0 across China in light of best accuracy and stability, while KNEA and MARS are also promising powerful models. [ABSTRACT FROM AUTHOR]

Background: Extensive studies have been carried out over the years to determine the maximum acceptable weight that a worker is capable of lifting in a given situation among Occidental populations across Europe and US. Nonetheless, studies that place emphasis on using lifting frequency as the quantifying task parameter, especially in developing countries such as Malaysia, appear to be in scarcity. Hence, this study determined the maximum acceptable frequency of lift (MAFL) for combined manual material handling (MMH) tasks amongst Malaysian males. Method: Two lifting loads were considered in this study: 1 kg and 5 kg. Each subject adjusted his frequency of lifting using a psychophysical approach. The subjects were instructed to perform combined MMH task as fast as they could over a period of 45 minutes without exhausting themselves or becoming overheated. The physiological response energy expenditure was recorded during the experimental sessions. The ratings of perceived exertion (RPE) for four body parts (forearms, upper arm, lower back and entire body) were recorded after the subjects had completed the instructed task. Results: The mean frequencies of the MMH task had been 6.8 and 5.5 cycles/minute for lifting load of 1 and 5 kg, respectively, while the mean energy expenditure values were 4.16 and 5.62 kcal/min for 1 and 5 kg load, respectively. These displayed a significant difference in the Maximum Acceptable Frequency of Lift (MAFL) between the two loads, energy expenditure and RPE (p < 0.05) whereby the subjects appeared to work harder physiologically for heavier load. Conclusion: It can be concluded that it is significant to assess physiological response and RPE in determining the maximum acceptable lifting frequency at varied levels of load weight. The findings retrieved in this study can aid in designing tasks that do not exceed the capacity of workers in order to minimise the risk of WRMSDs. [ABSTRACT FROM AUTHOR]

The aim of this study was to investigate the running pace and step characteristics among various competitive-level 400-m hurdlers through inter-group and intra-athlete comparisons. We analysed spatiotemporal data involving the split time, mean step length (SL) and mean step frequency (SF) for 13 male world-class and 14 male national-level 400-m hurdlers. We analysed 16.5 ± 3.9 races for each world-class hurdler and 19.8 ± 6.0 races for each national-level hurdler (the total number of analysed runs was 491) using publicly available television and internet broadcasts. Inter-group comparisons showed that both first- and latter-halves split times of the world-class hurdlers were significantly shorter than those of the national-level hurdlers. In the latter-half phase, no significant differences of SL and SF were observed between the world-class and national level hurdlers. Intra-athlete comparisons showed that no athletes favoured only first-half phase in terms of running speed in short finish times. In contrast, finish times of all hurdlers were sensitive to running speed in the latter-half phase. In the latter half of the race, 18 of the 27 hurdlers were identified as being SF reliant during speed enhancements; running speed of the other 9 hurdlers were also sensitive to high SF. In conclusions, important findings regarding high performance in inter-group comparisons do not always corresponded with those in intra-athlete comparisons. All athletes and coaches should first prioritize maintaining high running speeds in the latter half of 400-m hurdles rather than in the first half of the race. [ABSTRACT FROM AUTHOR]

We test and compare different incentives in motivating water conservation using a randomized controlled trial. In a field experiment carried out with Singaporean households, regular feedback was given, with informative, normative and monetary incentives provided to different groups. Evidence shows that all households saved an average of 4 Litres of water per person per day, with no difference in treatment effect found across various groups. Perhaps unsurprisingly, the water saving effect is also found to be more significant with high baseline users, who saved up to 5.9 Litres per person per day. High baseline households also respond more positively to the non-monetary incentives. [ABSTRACT FROM AUTHOR]

Background: Understanding seasonality of tuberculosis (TB) epidemics may lead to identify potentially modifiable risk factors. Studies conducted outside Japan have found seasonal variation among reported TB cases, with peaks in spring and summer and low prevalence in fall and winter. One hypothesis regarding spring or summer peaks in TB epidemics is that TB transmission likely increases in winter because of indoor crowding and poor ventilation, with development of primary TB among socially vulnerable people in spring and summer. Another plausible explanation is that vitamin D deficiency in winter depresses immunity, increasing the TB reactivation risk in these seasons. Previous studies suggest latitude-dependent factors, including reduced winter sunlight and its effect on vitamin D levels. Here, we investigated mechanisms of seasonality in TB epidemics in Japan, according to the effects of crowding and latitude. Methods: We used time-series analysis consisting of spectral analysis and least-squares method, to analyse geographically specific monthly number of newly registered cases of all forms of active TB in all 47 prefectures of Japan during 1998–2015. Results: In all power spectral densities for the 47 prefectures, spectral lines were observed at frequency positions corresponding to a 1-year cycle. The degree of this seasonality was associated with population density. We did not detect greater amplitude of seasonality at higher latitudes, suggesting that latitude-dependent factors, including reduced winter sunlight and its potential effect on vitamin D levels, do not contribute significantly to seasonality in Japan. Discussion and conclusion: In districts with high population density, measures are needed to address two specific types of active infection risk in adolescents and middle-aged adults: (i) public transport use, and (ii) irregular employment with no periodic medical examinations. To control active TB epidemics, investigating periodic structures in the temporal patterns of active TB in each district and each age group is important. [ABSTRACT FROM AUTHOR]

Elucidating the cold tolerance mechanism of Paeonia lactiflora, which is one of the most valuable ornamental and medicinal plants in Asia, fundamentally impacts its breeding and production. The glycerol-3-phosphate acyltransferase (GPAT) gene plays a pivotal role in cold resistance in a variety of plant species. Here, we cloned the P. lactiflora GPAT gene, determined its expression pattern, and tested its role in cold resistance. We obtained the full-length P. lactiflora GPAT gene using tissue-cultured seedlings and real-time polymerase chain reaction and rapid amplification of cDNA ends analyses. We named this gene PlGPAT in P. lactiflora. Phylogenetic analysis indicates that the PlGPAT gene is closely related with the GPAT genes in core eudicots. The phylogenetic tree containing 31 angiosperm species based on GPAT protein sequences is largely consistent with the known phylogeny in flowering plants. We conducted a time-course PlGPAT expression analysis and demonstrated that PlGPAT expression is correlated with low-temperature stress. Our results suggest that the PlGPAT gene plays an important role in regulating cold resistance in P. lactiflora. [ABSTRACT FROM AUTHOR]

Background: Japanese encephalitis virus (JEV) is a major cause of encephalitis in Asia, and the commonest cause of mosquito-borne encephalitis worldwide. Detection of JEV RNA remains challenging due to the characteristic brief and low viraemia, with 0–25% of patients positive, and the mainstay of diagnosis remains detection of anti-JEV IgM antibody. Methods: We performed a systematic review of published RT-PCR protocols, and evaluated them in silico and in vitro alongside new primers and probes designed using a multiple genome alignment of all JEV strains >9,000nt from GenBank, downloaded from the NCBI website (November 2016). The new assays included pan-genotype and genotype specific assays targeting genotypes 1 and 3. Results: Ten RT-qPCR assays were compared, a pre-existing in-house assay, three published assays and six newly designed assays, using serial RNA dilutions. We selected three assays, one published and two novel assays, with the lowest limit of detection (LOD) for further optimisation and validation. One of the novel assays, detecting NS2A, showed the best results, with LOD approximately 4 copies/ reaction, and no cross-reaction on testing closely related viruses in the JEV serocomplex, West Nile Virus and St. Louis Virus. The optimised assays were validated in consecutive patients with central nervous system infections admitted to hospitals in Laos, testing paired CSF and serum samples. Conclusions: We succeeded in developing a JEV specific RT-qPCR assay with at least 1 log10 improved sensitivity as compared to existing assays. Further evaluation is required, field-testing the assay in a larger group of patients. [ABSTRACT FROM AUTHOR]