Search

Abstract: In situ neutron powder diffraction measurements of a commercial lithium-ion battery reveal perturbations to the phase evolution of the Li x C6 electrode caused by overcharge. Above ∼4.5 V the anode is entirely composed of LiC6. During discharge from the post-overcharged state LiC6 persists to the 90% discharge state, compared with its persistence to the 27% discharge state during conventional cycling. At the completely discharged state the post-overcharged anode is a mixture of LiC12, LiC18, and graphite, while the conventionally cycled anode is composed of graphite alone. The phase evolution of a post-overcharged battery during charge also differs relative to conventional cycling, most noticeably until the 9% state of charge. [Copyright &y& Elsevier]

Abstract: The structural response to electrochemical cycling of the components within a commercial Li-ion battery (LiCoO2 cathode, graphite anode) is shown through in situ neutron diffraction. Lithuim insertion and extraction is observed in both the cathode and anode. In particular, reversible Li incorporation into both layered and spinel-type LiCoO2 phases that comprise the cathode is shown and each of these components features several phase transitions attributed to Li content and correlated with the state-of-charge of the battery. At the anode, a constant cell voltage correlates with a stable lithiated graphite phase. Transformation to de-lithiated graphite at the discharged state is characterised by a sharp decrease in both structural cell parameters and cell voltage. In the charged state, a two-phase region exists and is composed of the lithiated graphite phase and about 64% LiC6. It is postulated that trapping Li in the solid|electrolyte interface layer results in minimal structural changes to the lithiated graphite anode across the constant cell voltage regions of the electrochemical cycle. [ABSTRACT FROM AUTHOR]

Commercial 18650 lithium ion cells containing a blended positive electrode of layered LiNi 0.5 Mn 0.3 Co 0.2 O 2 and spinel Li 1.1 Mn 1.9 O 4 alongside a graphite negative electrode were stored at various depth-of-discharge (DoD) at 60 °C for 1, 2, 4, and 6 months. After storage, the cells were cycled at C/25 at 25 °C between 2.75 and 4.2 V for capacity determination and incremental capacity analysis (ICA). In addition to ICA analysis, the mechanism for capacity fade was investigated by combining the results of neutron powder diffraction under in-situ and operando conditions, in conjunction with post-mortem studies of the electrodes using synchrotron X-ray powder diffraction and inductively-coupled plasma optical emission spectroscopy. Among the cells, those stored at 25% DoD suffered the highest capacity fade due to their higher losses of active Li, NMC, and LMO than cells stored at other DoD. The cells stored at 0% DoD shows second high capacity fade because they exhibit the highest of active LMO and graphite anode among the stored cells and higher losses of active Li and NMC than cells stored at 50% DoD. [ABSTRACT FROM AUTHOR]