Search

Background Bamboo, a lignocellulosic feedstock, is considered as a potentially excellent raw material and evaluated for lignocellulose degradation and bioethanol production, with a focus on using physical and chemical pre-treatment. However, studies reporting the biodegradation of bamboo lignocellulose using microbes such as bacteria and fungi are scarce. Results In the present study, Bacillus velezensis LC1 was isolated from Cyrtotrachelus buqueti, in which the symbiotic bacteria exhibited lignocellulose degradation ability and cellulase activities. We performed genome sequencing of B. velezensis LC1, which has a 3929,782-bp ring chromosome and 46.5% GC content. The total gene length was 3,502,596 bp using gene prediction, and the GC contents were 47.29% and 40.04% in the gene and intergene regions, respectively. The genome contains 4018 coding DNA sequences, and all have been assigned predicted functions. Carbohydrate-active enzyme annotation identified 136 genes annotated to CAZy families, including GH, GTs, CEs, PLs, AAs and CBMs. Genes involved in lignocellulose degradation were identified. After a 6-day treatment, the bamboo shoot cellulose degradation efficiency reached 39.32%, and the hydrolysate was subjected to ethanol fermentation with Saccharomyces cerevisiae and Escherichia coli KO11, yielding 7.2 g/L of ethanol at 96 h. Conclusions These findings provide an insight for B. velezensis strains in converting lignocellulose into ethanol. B. velezensis LC1, a symbiotic bacteria, can potentially degrade bamboo lignocellulose components and further transformation to ethanol, and expand the bamboo lignocellulosic bioethanol production.

The objective of this study was to obtain two types of fuels, i.e., bioethanol and biogas, in a sequential combination of biochemical processes from lignocellulosic biomass (corn straw). Waste from the agricultural sector containing lignocellulose structures was used to obtain bioethanol, while the post-fermentation (cellulose stillage) residue obtained from ethanol fermentation was a raw material for the production of high-power biogas in the methane fermentation process. The studies on obtaining ethanol from lignocellulosic substrate were based on the simultaneous saccharification and fermentation (SSF) method, which is a simultaneous hydrolysis of enzymatic cellulose and fermentation of the obtained sugars. Saccharomyces cerevisiae (D-2) in the form of yeast cream was used for bioethanol production. The yeast strain D-2 originated from the collection of the Institute of Agricultural and Food Biotechnology. Volatile compounds identified in the distillates were measured using gas chromatography with flame ionization detector (GC-FID). CH4 and CO2 contained in the biogas were analyzed using a gas chromatograph in isothermal conditions, equipped with thermal conductivity detector (katharometer) with incandescent fiber. Our results show that simultaneous saccharification and fermentation enables production of bioethanol from agricultural residues with management of cellulose stillage in the methane fermentation process.

Corn fiber is a co-product of commercial ethanol dry-grind plants, which is processed into distillers dried grains with solubles (DDGS) and used as animal feed, yet it holds high potential to be used as feedstock for additional ethanol production. Due to the tight structural make-up of corn fiber, a pretreatment step is necessary to make the cellulose and hemicellulose polymers in the solid fibrous matrix more accessible to the hydrolytic enzymes. A pretreatment process was developed in which whole corn kernels were soaked in aqueous solutions of 2.5, 5.0, 7.5, and 10.0 wt% ammonia at 105 °C for 24 h. The pretreated corn then was subjected to a conventional mashing procedure and subsequent ethanol fermentation using a commercial strain of natural Saccharomyces cerevisiae with addition of a commercial cellulase. Pretreatment of the corn with 7.5 wt% ammonia solution plus cellulase addition gave the highest ethanol production, which improved the yield in fermentation using 25 wt% solid from 334 g ethanol/kg corn obtained in the control (no pretreatment and no cellulase addition) to 379 g ethanol/kg corn (a 14% increase). The process developed can potentially be implemented in existing dry-grind ethanol facilities as a “bolt-on” process for additional ethanol production from corn fiber, and this additional ethanol can then qualify as “cellulosic ethanol” by the Environmental Protection Agency’s (EPA’s) Renewable Fuels Standard and thereby receive RINs (Renewable Identification Numbers).

Background: Future biorefineries will focus on converting low value waste streams to chemical products that are derived from petroleum or refined sugars. Feedstock pretreatment in a simple, cost effective, agnostic manner is a major challenge. Methods: In this work, beechwood sawdust was delignified via an organosolv process, assisted by homogeneous inorganic acid catalysis. Mixtures of water and several organic solvents were evaluated for their performance. Specifically, ethanol (EtOH), acetone (AC), and methyl- isobutyl- ketone (MIBK) were tested with or without the use of homogeneous acid catalysis employing sulfuric, phosphoric, and oxalic acids under relatively mild temperature of 175 &deg, C for one hour. Results: Delignification degrees (DD) higher than 90% were achieved, where both AC and EtOH proved to be suitable solvents for this process. Both oxalic and especially phosphoric acid proved to be good alternative catalysts for replacing sulfuric acid. High gravity simultaneous saccharification and fermentation with an enzyme loading of 8.4 mg/gsolids at 20 wt.% initial solids content reached an ethanol yield of 8.0 w/v%. Conclusions: Efficient delignification combining common volatile solvents and mild acid catalysis allowed for the production of ethanol at high concentration in an efficient manner.

não consta número Ethanol can be produced from cellulosic biomass in a process known as simultaneous saccharification and fermentation (SSF). The presence of yeast together with the cellulolytic enzyme complex reduces the accumulation of sugars within the reactor, increasing the ethanol yield and saccharification rate. This paper reports the isolation of Saccharomyces cerevisiae LBM-1, a strain capable of growth at 42 °C. In addition, S. cerevisiae LBM-1 and Kluyveromyces marxianus UFV-3 were able to ferment sugar cane bagasse in SSF processes at 37 and 42 °C. Higher ethanol yields were observed when fermentation was initiated after presaccharification at 50 °C than at 37 or 42 °C. Furthermore, the volumetric productivity of fermentation increased with presaccharification time, from 0.43 g/L/h at 0 h to 1.79 g/L/h after 72 h of presaccharification. The results suggest that the use of thermotolerant yeasts and a presaccharification stage are key toincreasing yields in this process.

Reed is a widespread-growing, inexpensive, and readily available lignocellulosic material source in northeast China. The objective of this study is to evaluate the liquid hot water (LHW) pretreatment efficiency of reed based on the enzymatic digestibility and ethanol fermentability of water-insoluble solids (WISs) from reed after the LHW pretreatment. Several variables in the LHW pretreatment and enzymatic hydrolysis process were optimized. The conversion of glucan to glucose and glucose concentrations are considered as response variables in different conditions. The optimum conditions for the LHW pretreatment of reed area temperature of 180°C for 20min and a solid-to-liquid ratio of 1 : 10. These optimum conditions for the LHW pretreatment of reed resulted in a cellulose conversion rate of 82.59% in the subsequent enzymatic hydrolysis at 50°C for 72 h with a cellulase loading of 30 filter paper unit per gram of oven-dried WIS. Increasing the pretreatment temperature resulted in a higher enzymatic digestibility of the WIS from reed. Separate hydrolysis and fermentation of WIS showed that the conversion of glucan to ethanol reached 99.5% of the theoretical yield. The LHW pretreatment of reed is a suitable method to acquire a high recovery of fermentable sugars and high ethanol conversion yield.

Dilute sulfuric acid pretreatment of the Jatropha curcas fruit hull at high temperatures (140°C to 180°C) performed in a 110-mL stainless steel reactor was investigated to enhance the enzymatic digestibility of its lignocellulosic components. Carbohydrates accounted for 43% of the dry matter of the J. curcas fruit hull biomass. The goal of the study was to optimize the pretreatment conditions (acid concentration, time, and temperature) in order to obtain the highest sugar yield after subsequent enzymatic hydrolysis. A Box-Behnken design was applied to the experimental setup in order to reduce the number of experiments. The optimal pretreatment conditions are 30-min incubations at a temperature of 178°C with a sulfuric acid concentration of 0.9% (w/v). Using these pretreatment conditions for a fruit solid loading of 9.52% followed by a 24-h enzymatic hydrolysis resulted in a liberation of 100% of all pentoses present (71% yield and 29% degradation to furfural) and 83% of the hexoses (78% yield and 5% degradation to 5-hydroxymethylfurfural). The simultaneous saccharification and fermentation experiment showed that acid-pretreated fruit hull can be used as a substrate for Saccharomyces cerevisiae to produce ethanol.

Background Engineering Saccharomyces cerevisiae to produce heterologous cellulases is considered as a promising strategy for production of bioethanol from lignocellulose. The production of cellulase is usually pursued by one of the two strategies: displaying enzyme on the cell surface or secreting enzyme into the medium. However, to our knowledge, the combination of the two strategies in a yeast strain has not been employed. Results In this study, heterologous endoglucanase (EG) and cellobiohydrolase I (CBHI) were produced in a β-glucosidase displaying S. cerevisiae strain using cell-surface display, secretion, or a combined strategy. Strains EG-D-CBHI-D and EG-S-CBHI-S (with both enzymes displayed on the cell surface or with both enzymes secreted to the surrounding medium) showed higher ethanol production (2.9 and 2.6 g/L from 10 g/L phosphoric acid swollen cellulose, respectively), than strains EG-D-CBHI-S and EG-S-CBHI-D (with EG displayed on cell surface and CBHI secreted, or vice versa). After 3-cycle repeated-batch fermentation, the cellulose degradation ability of strain EG-D-CBHI-D remained 60 % of the 1st batch, at a level that was 1.7-fold higher than that of strain EG-S-CBHI-S. Conclusions This work demonstrated that placing EG and CBHI in the same space (on the cell surface or in the medium) was favorable for amorphous cellulose-based ethanol fermentation. In addition, the cellulolytic yeast strain that produced enzymes by the cell-surface display strategy performed better in cell-recycle batch fermentation compared to strains producing enzymes via the secretion strategy. Electronic supplementary material The online version of this article (doi:10.1186/s13068-015-0344-6) contains supplementary material, which is available to authorized users.