Search

The advanced metering infrastructure (AMI) is an architecture for two-way communication between electric, gas and water meters and city utilities. The AMI network is a wireless sensor network that provides communication for metering devices in the neighborhood area of the smart grid. Recently, the applicability of a routing protocol for low-power and lossy networks (RPL) has been considered in AMI networks. Some studies in the literature have pointed out problems with RPL, including sub-optimal path selection and instability. In this paper, we defend the viewpoint that careful planning of the transmission power in wireless RPL networks can significantly reduce the pointed problems. This paper presents a method for planning the transmission power in order to assure that, after convergence, the size of the parent set of the RPL nodes is as close as possible to a predefined size. Another important feature is that all nodes in the parent set offer connectivity through links of similar quality. [ABSTRACT FROM AUTHOR]

Wireless sensor networks (WSN) are being increasingly used for data acquisition and control of remote devices. However, they present some constraints in critical and large-scale scenarios. The main limitations come from the nature of their components, such as lossy links, and devices with power supply limitations, poor processing power and limited memory. The main feature of software-defined networks (SDN) is the separation between the control plane and the data plane, making available a logically unified view of the topology in the controllers. In this way, it is possible to build network applications that take into account this unified view, which makes the SDN an alternative approach to solve the mentioned limitations. This paper presents the SD6WSN (software-defined 6LoWPAN wireless sensor network) architecture, developed to control the behavior of the data traffic in 6LoWPAN according to the SDN approach. It takes into account the specific characteristics of WSN devices, such as low data transfer rate, high latency, packet loss and low processing power, and takes advantage of the flexibility provided by flow-based forwarding, allowing the development of specific networking applications based on a unified view. We provide a detailed description of how we have implemented SD6WSN in the Contiki operating system. The new architecture is assessed in two experiments. The first considers a typical advanced metering infrastructure (AMI) network and measures the overhead of SD6WSN control messages in configurations involving different path lengths. The results indicate that the overhead introduced is not excessive, given the advantages that the SDN approach can bring. The second considers a grid-topology to evaluate the average latency of the peer-to-peer communication. It was observed that the average latency in the SD6WSN is considerably lower than that obtained with standard 6LoWPAN, showing the potential of the proposed approach. [ABSTRACT FROM AUTHOR]

Wireless Sensors Networks (WSNs) are an essential element of the Internet of Things (IoT), and are the main producers of big data. Collecting a huge amount of data produced by a resource-constrained network is a very difficult task, presenting several challenges. Big data gathering involves not only periodic data sensing, but also the forwarding of queries and commands to the network. Conventional network protocols present unfeasible strategies for large-scale networks and may not be directly applicable to IoT environments. Information-Centric Networking is a revolutionary paradigm that can overcome such big data gathering challenges. In this work, we propose a soft-state information-centric protocol, ICENET (Information Centric protocol for sEnsor NETworks), for big data gathering in large-scale WSNs. ICENET can efficiently propagate user queries in a wireless network by using a soft-state recovery mechanism for lossy links. The scalability of our solution is evaluated in different network scenarios. Results show that the proposed protocol presents approximately 84% less overhead and a higher data delivery rate than the CoAP (Constrained Application Protocol), which is a popular protocol for IoT environments. [ABSTRACT FROM AUTHOR]

Underwater acoustic networks (UAN) allow for efficiently exploiting and monitoring the sub-aquatic environment. These networks are characterized by long propagation delays, error-prone channels and half-duplex communication. In this paper, we address the problem of energy-efficient communication through the use of optimized channel coding parameters. We consider a two-layer encoding scheme employing forward error correction (FEC) codes and fountain codes (FC) for UAN scenarios without feedback channels. We model and evaluate the energy consumption of different channel coding schemes for a K-distributed multipath channel. The parameters of the FEC encoding layer are optimized by selecting the optimal error correction capability and the code block size. The results show the best parameter choice as a function of the link distance and received signal-to-noise ratio. [ABSTRACT FROM AUTHOR]

Monitoring and data collection are the two main functions in wireless sensor networks (WSNs). Collected data are generally transmitted via multihop communication to a special node, called the sink. While in a typical WSN, nodes have a sink node as the final destination for the data traffic, in an ad hoc network, nodes need to communicate with each other. For this reason, routing protocols for ad hoc networks are inefficient forWSNs. Trees, on the other hand, are classic routing structures explicitly or implicitly used in WSNs. In this work, we implement and evaluate distributed algorithms for constructing routing trees in WSNs described in the literature. After identifying the drawbacks and advantages of these algorithms, we propose a new algorithm for constructing spanning trees in WSNs. The performance of the proposed algorithm and the quality of the constructed tree were evaluated in different network scenarios. The results showed that the proposed algorithm is a more efficient solution. Furthermore, the algorithm provides multiple routes to the sensor nodes to be used as mechanisms for fault tolerance and load balancing. [ABSTRACT FROM AUTHOR]