Search

The overall usefulness of the bursting energy absorption (BEA) was studied for a better analysis of paper strength properties. Additionally, the changes of the BEA during more complex deformations of paper products, e.g., preliminary or simultaneous tensile and burst, were determined. For the purpose of the research, an experimental setup was designed. The results showed that the correlation between BEA and bursting strength was linear, but the proportionality strongly depended on paper grade. Thus, a more accurate method to characterize the bursting resistance (BR) of paper was proposed. The BR parameter is described by the three following parameters: average bursting strength, average bursting energy absorption, and the slope of the fitted linear regression curve (relationship between the bursting energy absorption and the bursting strength). This method revealed new mechanical behaviors of papers related to their preloading. [ABSTRACT FROM AUTHOR]

The article analyses an effect of paper strain rate on energy absorbed during tensile testing. The tests were carried out in the range where the effect of inertia forces could be omitted. A new calculation method is proposed to predict variations in breaking energy caused by changes in strain rate. The method was verified by laboratory tests and calculation results and its practical usefulness was confirmed. [ABSTRACT FROM AUTHOR]

The article analyses an effect of paper strain rate on energy absorbed during tensile testing. The tests were carried out in the range where the effect of inertia forces could be omitted. A new calculation method is proposed to predict variations in breaking energy caused by changes in strain rate. The method was verified by laboratory tests and calculation results and its practical usefulness was confirmed. [ABSTRACT FROM AUTHOR]

Highlights: [•] The Lucas–Washburn equation is inadequate in predicting water intake at short contact times. [•] The Lucas–Washburn equation inadequate for predicting intake as a function of temperature. [•] The absorption rate increase with temperature is controlled by molecular processes. [•] The adsorbed water on fiber surfaces lowers the solid–gas interfacial energy. [ABSTRACT FROM AUTHOR]

Abstract: A void network model, named Pore-Cor, has been used to study the permeation of an ink solvent into paper coating formulations coated onto a synthetic substrate. The network model generated anisotropic void networks of rectangular cross-sectional pores connected by elliptical cross-sectional throats. These structures had porosities and mercury intrusion properties which closely matched those of the experimental samples. The permeation of hexadecane, used as an analogue for the experimental test oil, was then simulated through these void structures. The simulations were compared to measurements of the permeation of mineral oil into four types of paper coating formulation. The simulations showed that the inertia of the fluid as it enters void features causes a considerable change in wetting over a few milliseconds, a timescale relevant to printing in a modern press. They also showed that in the more anisotropic samples, fast advance wetting occurred through narrow void features. It was found that the match between experimental and simulated wetting could be improved by correcting the simulation for the number of surface throats. The simulations showed a more realistic experimental trend, and much greater preferential flow, than the traditional Lucas–Washburn and effective hydraulic radius approaches. [Copyright &y& Elsevier]