Search

This paper is drawn from a talk presented at the “Exploring North Carolina’s Archaeological Heritage through Remote Sensing and Geophysics” symposium held on March 12, 2016 in Raleigh North Carolina. All of the papers at this conference were open to the public and indeed prepared for and delivered to a general audience. John J. Mintz, Deputy State Archaeologist, and Shawn M. Patch organized the symposium and asked me to give a brief background on the use of remote sensing and geophysics in North Carolina, discuss the papers, and talk about what I saw as the future of archaeological remote sensing. My presentation was the last one in the event so it was short and concise. [ABSTRACT FROM AUTHOR]

A cornerstone of the management and conservation of archaeological sites is recording their physical characteristics. Documenting and describing the site is an essential step that allows for delineating the components of the site and for collecting and synthesizing information and documentation (Demas, 2012). The information produced by such work assists in the decision-making process for custodians, site managers, public officials, conservators, and other related experts. Rigorous documentation may also serve a broader purpose: over time, it becomes the primary archival and monitoring record. Both scholars and the public use this information and interpret the site, and they can serve as a posterity record in the event of catastrophic or gradual loss of the heritage asset. In May 2018 the Getty Conservation Institute and the Department of Antiquities of Cyprus collaborated with the Carleton Immersive Media Studio in undertaking the documentation of Nea Paphos, a World Heritage site with very important mosaic pavements in the eastern Mediterranean. This contribution outlines the critical components of the documentation project: field study, field measurements, data processing, validation, GIS, and integration of external data. The paper summarizes the digital workflows and procedures used to produce the deliverables, as well as the equipment and technology employed. [ABSTRACT FROM AUTHOR]

In his paper the author summarizes the research of Roman Pannonia in the recent decades, mainly after 1986 when Pavel Oliva edited his volume of the series Tabula Imperii Romani, He examined the most important historical and administrative events of the province. Kovács also delt with the new historical monographs that studied the entire history or administration of Pannonia and the most important towns. The author separately examined the new epigraphic works, corpora and the new inscribed finds. In the last part of his paper he delt with the new archaeological discoveries from Brigetio to Sirmium. [ABSTRACT FROM AUTHOR]

With over 200 peer-reviewed papers published over the last 20 years, 3D modelling is no longer a gimmick but an established and increasingly common analytical tool for stone artefact analysis. Laser and structured light scanning, photogrammetry, and CT scanning have all been used to model stone artefacts. These have been combined with a variety of different analytical approaches, from geometric morphometrics to custom reduction indices to digital elevation maps. 3D lithic analyses are increasingly global in scope and studies aim to address an ever-broadening breadth of research topics ranging from testing the functional efficiency of artefacts to assessing the cognitive capabilities of hominid populations. While the impact of the computational revolution on lithic analysis has been reviewed, the impact of 3D modelling on lithic analysis has yet to be comprehensively assessed. This paper presents a review of how 3D modelling in particular has impacted the field of stone artefact analysis. It combines a quantitative bibliometric analysis with a qualitative review to assess just how "revolutionary" 3D modelling has been for lithic analysis. It explores trends in the use of 3D modelling in stone artefact analysis, its impact on the wider lithic analysis field, and methodological, regional and theoretical gaps which future research projects could explore. [ABSTRACT FROM AUTHOR]

This paper presents the results of a bibliometric analysis undertaken on Joseon gogo yeongu (Joseon Archaeological Research), North Korea's preeminent archaeology journal, providing information on the researchers, institutions, and research topics that have come to form the field of archaeological research in North Korea since the mid-1980s. Deviating from previous analyses of Joseon gogo yeongu, this paper focuses on the authors that contributed to Joseon gogo yeongu, identifying the archaeologists that have been most active in publishing articles. This particular method of establishing the key figures of North Korean archaeology reveals the presence of certain archaeologists whose importance has been overlooked within the South Korean discourse on North Korean archaeology. In addition, by tracing the research topics of these key figures over time, a broad understanding of the field of archaeological research in North Korea can be obtained. Information on institutional affiliations and co-authorships present within Joseon gogo yeongu also provide valuable insights into the workings of North Korean academia. Finally, by visualizing the results of the bibliometric analysis using word clouds and networks, the efficacy of Digital Humanities approaches to large data sets is demonstrated. [ABSTRACT FROM AUTHOR]

It is not unusual for a place to wait for years before being inscribed on the World Heritage List, but Sarnath—the place where the Buddha delivered his first sermon—has been on UNESCO's "tentative list" for close to 25 years. As a sacred place for Buddhist pilgrimages, Sarnath continues to attract thousands of visitors annually and yet, remains under-developed, unlike other pilgrim towns or religious tourism destinations. This paper examines the reasons for the stunted growth of Sarnath. The findings are based on fieldwork conducted in Sarnath in 2019. The analysis of stakeholder interviews suggests several reasons for Sarnath not being able to capitalize on its religious and cultural heritage for tourism-led development. It was found that the protection of the site as an archaeological park by the Archaeological Survey of India (ASI), which has been controlling development surrounding the park as well as prohibiting the performance of any rituals, have been the key endogenous factors that have contributed to the relative under-development of a Buddhist pilgrimage economy in the town. A handful of monasteries are where Buddhist followers stay and perform their pilgrimage rituals, rendering them as enclaves. Private-sector accommodation is also limited to around 15 hotels and guesthouses. Administratively, Sarnath does not have an independent governance structure. It is governed as just one ward (an electoral constituency) by the Municipal Corporation of Varanasi and is, thus, always under the shadow of Varanasi city. Varanasi is one of the most significant Hindu sacred cities and, hence, visitors stay there for much longer durations to soak in cultural offerings, including religious ceremonies around the Ganga River; a visit to Sarnath is secondary and often limited to a half-day tour. Moreover, the archaeological park at Sarnath serves a recreational purpose as a picnic site for domestic visitors. The exogenous factors mean that the interests of Sarnath (as a Buddhist site) are hardly acknowledged by the Hindu city of Varanasi. This paper argues that the multi-layered contestations that exist at the site level, the town–ward level, and between visitors and managers have further contributed to the poor state of heritage and tourism in Sarnath. [ABSTRACT FROM AUTHOR]

The research presented in this work is focused on describing part of the activities related to the 1st edition of the SUNRISE Summer School (Seashore and UNderwater documentation of aRchaeological herItage palimpSests and Environment) and a comprehensive approach to the documentation of an archaeological site. In the paper data acquisition and processing will be described in detail, together with the design of the survey project and the main specifications of the sensors and techniques adopted. The 3D metric data derived from the use of these consolidated geomatics techniques were validated during the processing and used as the basis for the generation of other added-value products: traditional 2D drawings and an HBIM model. More specifically, two different approaches for the modelling phase were followed: a more consolidated approach driven by the 2D representation and a more experimental one that foresaw NURBS modelling from the point clouds. The pros and cons of both approaches will be analyzed, and a metric validation of each strategy will be presented. In the paper's conclusions, some considerations are summarized on the use of HBIM for the management of the archaeological data, together with some further perspectives. [ABSTRACT FROM AUTHOR]

5Dculture is a 24-month collaborative project co-funded by the European Union. It includes twelve partners from diverse sectors of cultural heritage, including archaeology, museums and fashion. It aims to enrich the offer of European 3D digital cultural heritage assets in the data space and fosters their reuse in important domains such as education, tourism and the wider cultural and creative sectors towards socially and economically sustainable outcomes. In particular, the project will deliver high-quality 3D content by identifying and engaging existing datasets from partners' collections focusing on topics of fashion, archaeology and architecture, all of which occupy a central place in the vast cultural heritage of Europe. It will also develop several reuse scenarios, which will experiment with the aforementioned assets in their complexity (from high-quality to derivatives).The Discovery Programme has a long research interest in 3D digital documentation and has participated in collaborative projects in the past, notably 3D-ICONS. However, opportunities and challenges in the reuse of 3D archaeological content exist, including the reuse of 3D content to enhance visitors experience at archaeological sites and the ability to exploit 3D surrogates for different sectors (tourism, education, gaming, the arts, conservation and heritage management).This paper will present the research that has been undertaken in this context, through the development of an enhanced processing pipeline to improve the quality of 3D models of cultural heritage assets, resulting in their improved re-use. It will present the approaches to improving model geometry, generating and applying enhanced textures, creating rich and functional metadata and strategies for persistence and archiving.A core component of our research has been the development of the processing pipeline to improve 3D model appearance through the application of parametric materials in the development of synthetic textures which artificially enhance the visualising of cultural heritage objects. Through the visual enhancements of 3D content improvements to the interpretation and aesthetic appearance of monuments and artefacts can be achieved, adding value to the original surveyed data. The paper will detail the processing pipeline, working from prime survey data in survey specific software, through 3D modelling techniques, and finally visualising and presentation approaches which enable increased accessibility and usability.The paper will conclude with a discussion of deliverables, particularly in the context of value to conservation. The Discovery Programme works together with many of the state agencies in Ireland on heritage and conservation projects, and it is the delivery of enhanced but practical outputs that their archaeologists and architects require. These include the Office of Public Works, National Monuments Service & the Heritage Council. [ABSTRACT FROM AUTHOR]

Copyright of Virtual Archaeology Review is the property of Virtual Archaeology Review and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In 2017/2018, two seasons of archaeological surveys were undertaken in Lejja, southeastern Nigeria. The aim of the archaeological field work was to systematically sample the area to locate archaeological sites, scatters of artefacts, features; and to characterize and record these findings. A particular objective was to identify sites with different typological or chronological characteristics and to then select representative examples for further investigation and excavations. This paper thus focuses for the first time; on the general knowledge of the archaeological signatures in addition to iron working that abound at the Lejja site from an archaeological perspective. We aimed to identify sites with evidence of iron production and sites with other characteristics of human habitation to compare inter-site variation. Using ethnoarchaeological studies, archaeological surveys and excavations, sixteen new sites were identified stretching from iron smelting sites to domestic/habitation sites and ancestral sites. We utilized both a systematic transect and an opportunistic approach to locate and map the archaeological sites encountered. The focus of the study was on thirteen key villages in Lejja southeastern Nigeria. Analysis of data shows that there seem to be distinct areas on the landscape for habitation and metal working respectively. However, it is unclear as yet what this distinction represents in terms of social organization, particularly whether they represent one community with different activity sites or two communities with distinct identities or indeed a more complex temporal and spatial patterning. [ABSTRACT FROM AUTHOR]

Copyright of Magazine General Union of Arab Archaeologists is the property of General Union of Arab Archaeologists and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Archaeometry can help archaeologists in many ways, and one of the most common archaeometric objectives is provenance analysis. Volcanic rocks are often found in archaeological sites as materials used to make grinding tools such as millstones and mortars or as building materials. Petrographic characterization is commonly applied to identify their main mineralogical components. However, the provenance study of volcanic stones is usually undertaken by comparing geochemical data from reference outcrops using common descriptive statistical tools such as biplots of chemical elements, and occasionally, unsupervised multivariate data analysis like principal component analysis (PCA) is also used. Recently, the use of supervised classification methods has shown a superior performance in assigning provenance to archaeological samples. However, these methods require the use of reference databases for all the possible provenance classes in order to train the classification models. The existence of comprehensive collections of published geochemical analyses of igneous rocks enables the use of the supervised approach for the provenance determination of volcanic stones. In this paper, the provenance of volcanic grinding tools from two archaeological sites (Iulia Libica, Spain, and Sidi Zahruni, Tunisia) is attempted using data from the GEOROC database through unsupervised and supervised approaches. The materials from Sidi Zahruni have been identified as basalts from Pantelleria (Italy), and the agreement between the different supervised classification models tested is particularly conclusive. In contrast, the provenance of the materials from Iulia Libica remained undetermined. The results illustrate the advantages and limitations of all the examined methods. [ABSTRACT FROM AUTHOR]

Starting with observations on a coffin that was brought from Egypt in 1722 and displayed at the British Museum from the first day of its opening -- coffin EA6695 -- this paper explores physical engagements with Egyptian mummies in London at the turn of the 19th century. It argues that it is through physical engagements -- including investigations and destructions -- that the Egyptian mummy was used to construct knowledge, not only about ancient Egypt, but about the body, race and the modern world. Using a number of sources from a range of individual reports, this paper sheds light on the cultural practices that surrounded and shaped engagements with Egyptian human remains, and reappraises the value of looking at destructive investigations as cultural interventions that can explain later practices, including the public mummy unrolling. [ABSTRACT FROM AUTHOR]

As one of the common physical materials in Chinese archaeological excavations, ancient bronzes are an essential basis for studying the development of Chinese bronze culture, which is of great significance for exploring the development law of ancient human civilization and reconstructing ancient human society. As China's infrastructure advances, the number of bronzes unearthed by archaeological excavations continues to increase. However, environmental damage to artefacts is very complex, whether the buried environment of the artefacts or the above-ground environment when the artefacts are unearthed, leading to different health problems for the excavated bronzes. A scientific assessment of these bronzes needs to be carried out prior to extraction to inform staff how they should be extracted, moved, and transported and how they should be restored afterwards. In response to the above problems, this paper takes excavated bronzes from archaeological sites as the research object and, by analysing and studying the relevant industry standards and the disease characteristics of bronzes, establishes a three-tier indicator framework for assessing the health of bronzes in a layer-by-layer refinement and proposes quantitative indicators with typical correlations. Through extensive research and testing, we screened out efficient, non-destructive, convenient and reliable assessment and testing methods and assessment models that combine subjective and objective aspects suitable for archaeological sites. On this basis, the paper achieves a scientific and practical assessment of the health status of bronzes excavated from archaeological sites. After repeated experiments, a set of comprehensive methods for quickly and conveniently assessing the health status of excavated bronzes was proposed for the first time and successfully applied to the archaeological excavation site of Sanxingdui site in Guanghan City, Sichuan Province, China. [ABSTRACT FROM AUTHOR]

The Sun Temples of the Vth dynasty are the most elusive Egyptian monuments of the Old Kingdom. Textual sources seem to refer to a different temple for each different pharaoh of the dynasty, but only two have been discovered at Abu Gurab, a few hundred meters north of the dynastic necropolis of Abusir. Previously, the author has proposed a cognitive–topographical framework that strongly supports the idea, originally formulated by Stadelmann, that only these two already known temples actually existed, while the others—with the possible exception of the last one—mentioned in the sources refer to renovations carried out by subsequent pharaohs on existing monuments. This paper aims to give a complete reassessment of this question using satellite imagery. Together with recently disclosed archaeological excavations at Abu Gurab, which have direct relevance for the history of the Sun Temples, the analysis provided here adds new, surprising aspects to the dynastic scenario, bringing in the meantime, further support to the above-mentioned framework. A proposal for the location of the last temple is also highlighted in the same analysis. [ABSTRACT FROM AUTHOR]

The fusion of geomatic techniques with different accuracy and resolution has been used in recent years to applications of geometrical documentation for several archaeological sites. In this research article, the case of the Roman Baths of Amathus in Limassol, Cyprus was investigated.Aerial photogrammetry and Terrestrial Laser Scanning (TLS) techniques were used to produce the final product. The photogrammetric data were based on Post-Processed Kinematic (PPK) imagery while the TLS georeference was based on targets.The main research objective of this paper is to examine the reliability of PPK photogrammetric data without the use of Ground Control Points (GCPs) and how well they can be integrated with TLS data. Also, the two acquisition techniques were compared and indicated that 0.005 m Ground Sampling Distance (GSD) resolution aerial images and 0.0061/10 m resolution scans can be qualitatively fused.The research paper will present the entire methodology up to the generation of the final 3D photorealistic product. [ABSTRACT FROM AUTHOR]

There are multiple approaches to bridging the gap between the relatively new world of three-dimensional survey and so-called reality-capture with traditional recording conventions and archaeological interpretative processes, challenges that have been encountered during the various fieldwork campaigns undertaken on the Ribadeo I wreck. Questions discussed in this paper include: does every team member need to be a 3D expert? Does a 3D specialist need to be an archaeologist? Is it enough to have a specialist 3D 'navigator', someone who can drive the software through the data and act as a guide to a wider team to deliver their own interpretation of the evidence? When conventional outputs are required, including plans, sections, profiles and other nautical-specific views, how can these be efficiently generated from the available photogrammetry and presented to provide comparable information to those who speak and require this type of visual language? This paper does not provide simple or definitive answers to these questions. However, the work undertaken so far on Ribadeo I can offer some contributions to current discussions and consider the challenges within the context of an internationally important shipwreck and work that is necessarily limited by available time and funds. [ABSTRACT FROM AUTHOR]

This paper, reflecting on the village and archaeological site of Jamalo located on the top of the Zayanderud dam, aims to explore the circumstances human settlements would have encounter with the construction of the dam and when its reservoirs were flooded. About 30 years ago, as the images from Google Map showed, the water strip emerging from the Zayanderud dam, wherein the left riverbank hosted the village and archaeological site of Jamalo. This site had been occupied for much of the sixth and fifth millennium BC until the beginning of the Early Bronze Age. In the Middle Bronze Age, it had been dominated by the Proto-literate, historic, and Islamic periods. Archaeological evidence from surface surveys also indicated that pottery shreds were similar to those of Sialk III and Bakun A. Now, Jamalo is exposed to the waters of the dam reservoir. Therefore, the main objective of this paper is to provide an overview of what would have happened to archaeological sites with the construction of the dam, its reservoirs were flooded, and when landscapes were radically altered. Another question was: "What would have happened to archeological sites as floods made it inaccessible?" Based on the excavation at Jamalo and the comparison of images taken from the region before and after the construction of the dam, it was observed that the reservoir had destroyed the village, and the slopes of the site, especially on the eastern and northeastern parts, had been covered with a layer of deposits. [ABSTRACT FROM AUTHOR]

Simple Summary: This paper presents, to the best of our knowledge, the first documented instance of a specific pathological lesion found in a Late Iron Age (La Tène period) horse. This discovery was made in the CX 143 pit in Alba Iulia, Romania, during archaeological rescue excavations conducted in 2022. In addition to the standard morphological features of the horse, comprehensive investigations revealed an unusual lesion on the left scapular neck. This lesion was evaluated both macroscopically and radiologically and has been interpreted as periarticular and supraarticular hyperostosis. A series of hypotheses were proposed regarding the cause of this specific type of injury, including the possibility of it being traumatic in nature, and potentially influenced by particular conformational aspects of the identified horse. The reconstruction of past life based on archaeozoology is a challenging domain that offers a range of valuable details concerning former human and animal populations. Additionally, the ancient era is a source of information for human and veterinary medicine, as well as for other biological sciences. This report highlights a pathological lesion identified during the investigation of a horse skeleton from a pit dated La Tène in Alba County (Romania). The left scapula with lesions was collected from the skeleton of a buried 7–8-year-old male horse. The aforementioned bone underwent gross, radiological, and computerized tomography evaluation. Macroscopically, a collar of supraarticular cancellous hyperostosis was detected, most likely as a consequence of an invasive chronic phlegmonous periarthritis and/or bursitis of the infraspinate muscle following probably a penetrating cutaneous wound in the shoulder region. A suppurative periarthritis\bursitis of the infraspinate muscle situated nearby caused, apparently, supraglenoidian periosteitis responsible for osteophytes and exostoses formation in the neck region of the scapula. [ABSTRACT FROM AUTHOR]

Along the western coastal plain of the Red Sea, the discovery of lithic tools proved that the occurrence of archaeological remains belonged to the Stone Age era. Unfortunately, until recently, most of the Stone Age site plans in the western Red Sea periphery have been unknown because of change in climate in addition to covering these sites with a large layer of sand. Recently, remote sensing (RS) data have proven to be effective at identifying buried archaeological sites using radar satellite imagery due to their ability to penetrate the land surface. This paper aims to identify and reconstruct several potential Stone Age sites using radar satellite images in the Tokar region, North-Eastern Sudan, on the western plain of the Red Sea. Radar (Sentinel-1 SAR GRD: C-band) data were processed utilizing the advantages of the Google Earth Engine platform and Snap software. The results of this research showed that some potential settlements belonging to the Stone Age era (expectedly dating back to the end of the Pleistocene and/or the initial phase of the Holocene) have subcircular shapes with some interior subcircles. These results shed new light on the potential construction technique, size, and function of the settlement in the Stone Age era and can provide some initial insights into the ancient lifestyle in this region. Additionally, this study can aid in future archaeological surveys and excavation missions in this region. [ABSTRACT FROM AUTHOR]

Copyright of Arqueología Iberoamericana is the property of Arqueologia Iberoamericana and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This article focuses on the Ottoman Period urban fabric of Silifke, a crucial historical town in Turkey. The aim of this paper is to develop a research framework for the transfer of cultural heritage and cultural continuity in multi-layered historical cities. In this context, investigating the level of sociocultural transition and physical permeability between layers is the main problem of the article. The scope of the study consists of an approximately 1.5 km2 (150 hectares) area within the boundaries of the 3rd Degree archaeological site determined in 1995 by the Adana Cultural and Natural Heritage Conservation Regional Board. In the case area, there are building remains and 58 registered buildings, 40 of which were built during the Ottoman Period. The findings and evaluations were examined in three parts: the periods before the Ottoman Period, the Ottoman Period, and the Republican Period. Analyses were developed independently or overlapped from archive documents such as the Presidential Ottoman Archive (BOA), provincial yearbooks, engravings of travelers, photographs, aerial photographs of different years, current maps, zoning plans, and conservation plans. Then, we made descriptions and inferences about urban change/transformation, which is affected by the political, economic, social, cultural, and environmental factors of the town and will shape the future change/transformation and management of the town. The ultimate goal is to set up a basis for the Silifke town center that will guide future interventions and design and planning policies for cultural continuity. [ABSTRACT FROM AUTHOR]

This paper represents an attempt at a detailed analysis of woodland presence and dynamics during the Middle Ages (AD 500-1500), as a contribution to the current debate on large-scale reforestation in the Netherlands. Palynological data for this particular period are scarce and allow only global reconstructions. To widen our search for historical woodland proxies, we investigated the potential of archaeologically excavated tree-trunk wells. We carried out a nation-wide inventory of this type of well, in which the shaft is formed by hollowed-out tree trunks, typically large oak trees. Our suspicion that such trees indicate the local presence of (old) woodland in the past was confirmed by a marked positive correlation with spatial reconstructions based on other sources of information: archaeological (charcoal kilns) and non-archaeological (place names and historical references). The observed correlations suggest that mapping the distribution of precisely dated tree-trunk wells can indeed contribute to achieving fairly detailed reconstructions of medieval woodland cover. [ABSTRACT FROM AUTHOR]

This paper discusses recent archaeological fieldwork conducted at El Castillejo, a medieval Islamic settlement in Los Guájares, Granada, southern Spain. Results from combined archaeological excavation and archaeoseismological assessment of standing structures suggest that the site was affected by a destructive earthquake during its occupation. Radiocarbon samples and OSL analysis point to a seismic event in the period CE 1224–1266. The earthquake occurred within an area marked by a 'seismological gap' in terms of historic seismicity and the causative fault has been tentatively identified in the Nigüelas-Padul Fault System which lies north of the settlement. This event is not recorded by national or European seismic catalogues and represents the oldest historic earthquake in the Granada area. Our work stresses the significant impact that targeted archaeological investigations can generate in our understanding of the local historic seismicity, thus providing clear implications for seismic disaster prevention and reduction. [ABSTRACT FROM AUTHOR]

A novel meta steel with negative Poisson's ratio effect (termed as micro-NPR steel) is developed for rock support in deep underground engineering. It possesses high strength, high ductility, and high energy absorption characteristics. In this paper, static tension and modified dynamic drop hammer tests are performed on this novel material to investigate its mechanical properties first. Then based on this material, a new generation of micro-NPR anchor cable is developed and applied in field tests subjected to blasting dynamic loads. The results of laboratory tests reveal that the ultimate elongation of micro-NPR steel under dynamic impacts is more than 30% and it is over 1.5 times that of Q235; the plastic and total energy absorption of micro-NPR are both significantly higher than that of Q235. Field test indicates the fine controlling effect of micro-NPR anchor cable on surrounding rock mass under dynamic loads. Axial force confirms that micro-NPR cables can distribute and absorb the dynamic energy uniformly around the supported rock when subjected to dynamic disturbance, avoiding local failure induced by excessive stress concentration. The excavation compensation principle and energy-absorbing characteristics are used to explain the support mechanisms. Thus, micro-NPR material and anchor cable can control and prevent dynamic disasters in deep underground engineering effectively. [ABSTRACT FROM AUTHOR]

Khirbat Iskandar is an Early Bronze Age (ca. 3800-1950 BCE) mound in the Madaba Governorate of Jordan. Until a decade ago, it was better known as a key site for the non-urban Early Bronze IV period (ca. 2500-1950 BCE), but is increasingly emerging as a signature site for the urban Early Bronze II-III period (ca. 3050-2500 BCE). The contour of the tall site is shaped by the presence of buried fortifications that were investigated in the north-western sector of the mound, where a long sequence of rebuilds was recognized, but were exposed to and impacted by modern construction activities along the southern and south-eastern areas prior to being recorded. There, due to erosion and weathering, the stone fortifications dating to the first half of the Early Bronze III (ca. 2850-2650 BCE) fell down. In this paper, we report on our strategies to assess threats, document damages, sustainably stabilize, and consolidate the collapsed ancient fortifications in the 2023 field season at Khirbat Iskandar. At the same time, we discuss the conceptual/methodological and practical challenges of identifying best practices in the conservation and preservation of antiquities that collapsed prior to being excavated. We conclude with some thoughts on how to build on these actions to efficiently present the archaeology and cultural heritage at protohistoric sites, like Khirbat Iskandar, and to make it accessible for the local and the international communities. [ABSTRACT FROM AUTHOR]

This paper investigates the ability of touching practices to measure. Thinking with touch highlights not only its ability to perceive, but also to affect and intervene in material contexts. Drawing on extracts from the author's research into archaeological excavation labour, this paper wonders how touch could do measurement in the sciences otherwise. Addressing measurement in terms of active practices of 'measuring' or 'taking measure' emphasises the lived time of scientists, as well as their bodily ability to switch between modes of measuring. The paper aims to elicit the temporal, bodily, affective and spatial intricacies of archaeological labour in the trenches, and contributes to critical ethnographic accounts on materiality, context, and comparison in Science and Technology Studies. In doing so, it takes material groovings in archaeological fieldwork as evocative acts of scientific measurement. [ABSTRACT FROM AUTHOR]

Underwater archaeological excavations present unique challenges, particularly when conducted at significant depths where divers face limited time on the archaeological site. Traditional methods of recording excavation progress, such as manual documentation and drawings, are too time-consuming when the time on the site totals no more than 12 min. To address these limitations, this paper introduces an innovative approach for daily recording and observation of underwater archaeological excavations using 3D photogrammetric models and point of view (PoV) cameras developed specifically for the excavation of a shipwreck situated at a depth of 110 m. The proposed system leverages advancements in photogrammetry and 3D modelling techniques to capture and analyse detailed visual data of the excavation site on a daily basis. Three-dimensional photogrammetric models offer a comprehensive and easily accessible representation of the excavation site, enabling the team to record and analyse excavation levels and features in a highly precise and detailed manner. By comparing the 3D models captured on consecutive days, researchers can precisely measure changes in the excavation area, identify new artifacts or structures, and record the progress of the excavation. The PoV cameras contribute to the planning of daily tasks required on the site. Overall, this paper showcases innovative methods for underwater archaeological excavations at significant depths, employing 3D photogrammetric models for daily recording as well as PoV cameras for observation. The proposed system represents a substantial advancement in the field of underwater archaeology, offering a more accurate, efficient, and reliable approach to documenting and analysing excavation progress, whilst also producing results that can be subsequently adapted and applied to other deep water archaeological sites. [ABSTRACT FROM AUTHOR]

Copyright of Ars & Humanitas is the property of Ars & Humanitas and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Volatile organic solids, such as cyclododecane or menthol, have been employed as temporary reinforcement material during archaeological excavations. They are usually applied as melts and reinforcement is achieved once the melts solidify. Such solidification process can induce internal stress on the artifacts, which can be a big concern, especially to those very precious and fragile ones. However, information about such stress is still extremely limited at present. This paper proposes an experimental method based on resistance strain gauge technique to monitor the deformation induced by solidification of menthol melt. Bending tests are performed on very thin glass slides. The solidification process of menthol melt is well characterized by the development of mechanical strains. Then, menthol melts are applied to three kinds of simulated samples, i.e. glass, sandstone and rice paper, to investigate the mechanical response of preserved bodies upon solidification. It is found that menthol melt will generate certain amount expansion or contraction of the objects upon solidification. The stresses induced, evaluated according to obtained strains, are generally quite small, indicating that application of menthol as reinforcement material is safe in mechanics for cultural relics. [ABSTRACT FROM AUTHOR]

Featured Application: Inspection of structures, e.g., offshore/nuclear/eolic plants, bridges, and tall buildings. Inspection of archaeological sites. Placement and retrieval of sensors. Assembly of structures in places not accessible/safe for humans. The precise control of an aerial manipulator presents a formidable challenge due to the inherent mobility of its base, which is subject to both external disturbances and dynamic disturbances due to manipulator motions. In this paper, we introduce two Closed-Loop Inverse Kinematics (CLIK) control algorithms tailored to aerial manipulators. The first algorithm operates at the velocity level and uses the Generalized Jacobian for inverse kinematics, while the second one operates at the acceleration level. We evaluate their performance in a simulated environment, replicating real-world challenges such as the wind effect, sensors noise, uncertainty of the system inertial parameters, and impulsive forces at the end-effector. Trajectory tracking simulated experiments are carried out for a two- and three-degree-of-freedom (DOF) aerial manipulator tracking a circular trajectory with its end-effector. Both algorithms demonstrate promising results in coping with external disturbances and variations in the inertial parameters, enhancing the precision of the trajectory tracking control. The acceleration-level algorithm shows overall better performance compared to the velocity-level one in the face of greater implementation complexity and computational burden. [ABSTRACT FROM AUTHOR]

The study of the evolution of regional typology of archaeological cultures is essential in understanding the trajectory of cultural evolution from a temporal and spatial perspective. In this paper, we focused on the Taihu Lake region, one of the six major regional typologies of Neolithic archaeological cultures in China. By utilizing archaeological site data from the Neolithic Era in this region, our study investigates the evolution of typologies in archaeological cultures at both regional and sub-regional scales. From a broad perspective, quantitative methods were used to explore the cultural evolution process in the Taihu Lake region. The degree of social integration and intercultural inheritance can be reflected through the size of the site and the superimposition of cultural layers. In addition, climate and environmental data were combined to investigate its driving factors. Moreover, GIS (Geographic Information System) analysis methods were used to cluster and partition the cultures in the Taihu Lake region. By identifying distinct groups of sites, it is possible to deconstruct and analyze the interior of the cultures to study their distribution patterns and to explore the exchanges and expansions within the cultures. By integrating both research approaches, our study provides a comprehensive analysis of the evolutionary characteristics of the regional typology of archaeological cultures within the Taihu Lake region. These findings contribute to the development of quantitative methods for studying the evolutionary trajectory of archaeological cultural systems. [ABSTRACT FROM AUTHOR]

This paper introduces an efficient method for 3D instance segmentation based on 2D object detection, applied to the photogrammetric survey images of archaeological sites. The method capitalizes on the relationship between the 3D model and the set of 2D images utilized to compute it. 2D detections on the images are projected and transformed into a 3D instance segmentation, thus identifying unique objects within the scene. The primary contribution of this work is the development of a semi-automatic image annotation method, augmented by an object tracking technique that leverages the temporal continuity of image sequences. Additionally, a novel ad-hoc evaluation process has been integrated into the conventional annotation-training-testing cycle to determine the necessity of additional annotations. This process tests the consistency of the 3D objects yielded by the 2D detection. The efficacy of the proposed method has been validated on the underwater site of Xlendi in Malta, resulting in complete and accurate 3D instance segmentation. Compared to traditional methods, the object tracking approach adopted has facilitated a 90% reduction in the need for manual annotations, The approach streamlines precise 3D detection, establishing a robust foundation for comprehensive 3D instance segmentation. This enhancement enriches the 3D survey, providing profound insights and facilitating seamless exploration of the Xlendi site from an archaeological perspective. [ABSTRACT FROM AUTHOR]

Tuberculosis (TB) is a bacterial infection that is well-known in the palaeopathological record because it can affect the skeleton and consequently leaves readily identifiable macroscopic alterations. Palaeopathological case studies provide invaluable information about the spatio-temporal distribution of TB in the past. This is true for those archaeological periods and geographical regions from when and where no or very few TB cases have been published until now–as in the Sarmatian period (1st–5th centuries CE) in the Barbaricum of the Carpathian Basin. The aim of our paper is to discuss five newly discovered TB cases (HK199, HK201, HK225, HK253, and HK309) from the Sarmatian-period archaeological site of Hódmezővásárhely–Kenyere-ér, Bereczki-tanya (Csongrád-Csanád county, Hungary). Detailed macromorphological evaluation of the skeletons focused on the detection of bony changes likely associated with different forms of TB. In all five cases, the presence of endocranial alterations (especially TB-specific granular impressions) suggests that these individuals suffered from TB meningitis. Furthermore, the skeletal lesions observed in the spine and both hip joints of HK225 indicate that this juvenile also had multifocal osteoarticular TB. Thanks to the discovery of HK199, HK201, HK225, HK253, and HK309, the number of TB cases known from the Sarmatian-period Carpathian Basin doubled, implying that the disease was likely more frequent in the Barbaricum than previously thought. Without the application of granular impressions, the diagnosis of TB could not have been established in these five cases. Thus, the identification of TB in these individuals highlights the importance of diagnostics development, especially the refinement of diagnostic criteria. Based on the above, the systematic macromorphological (re-)evaluation of osteoarchaeological series from the Sarmatian-period Carpathian Basin would be advantageous to provide a more accurate picture of how TB may have impacted the ancestral human communities of the Barbaricum. [ABSTRACT FROM AUTHOR]

This paper aims to present analytical approaches and digital methods for the analysis of ceramic assemblages resulting from catastrophic alluvial flood flows. The study has been developed based on the principles of 'alluvial archaeology', a recently-developed field of archaeology. In this research program, ceramic records have been treated on a par with clasts in the geomorphological analyses of alluvial sediments. To test the different analytical procedures the 'Ancient Shipyard' of Pisa-San Rossore has been selected as a case study. This archaeological site represents a river channel, affected by several alluvial flood events. The analysis achieved several objectives, including the definition of the formation processes of the deposition (in synergy with the results of geomorphological data), the chronological framework of alluvial floods, the dynamics of flows, and locating the original deposition of the ceramic assemblage. In this regard, the combination of different approaches has proven particularly useful, ranging from computational analyses for chrono-typological determination of ceramic assemblages to intra-site spatial analyses, which have been useful in defining alluvial flood flows and the subsequent movement of ceramic assemblages. [ABSTRACT FROM AUTHOR]

This paper describes the high-resolution survey of the archaeological site of Nora (Sardinia, Italy) using the aerophotogrammetric technique. The survey was conducted in October 2021 on a 14-hectare peninsula located in the Gulf of Cagliari. Previous attempts to survey the area, aside from the 1 metre/pixel LiDAR survey carried out by the Region of Sardinia, have been hampered by the challenges posed by the size of the area and the costs involved. The Digital Terrain Model was obtained from the 3D model created with the Agisoft Metashape© software by removing the buildings and the vegetation. The segmentation process was carried out using Cloud Compare and the resulting DTM was then analysed using the geomorphological analysis tools provided by QGIS. The seabed DTM was obtained through several survey campaigns between 2013 and 2015, using the same software. The terrestrial DTM was merged with the seabed DTM, resulting in a comprehensive 3D and 2D model of the peninsula and its surroundings. The final DTM was printed with rapid prototyping technologies to explore its potential use as a tactile model for promotion and dissemination in the field. [ABSTRACT FROM AUTHOR]

Copyright of Virtual Archaeology Review is the property of Virtual Archaeology Review and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Virtual Archaeology Review is the property of Virtual Archaeology Review and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Athar alrafedain is the property of Republic of Iraq Ministry of Higher Education & Scientific Research (MOHESR) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Microbial deterioration as one of the widespread problems in archaeological site museums significantly affects their safety and exhibits. This paper systemically investigated the environments and conditions of microbial outbreaks in the Dadiwan No. F901 site museum, which is a representative archaeological site of prehistoric Yangshao culture. The morphology and harmful characteristics of the outbreak microorganisms were analyzed by microscopic techniques. The ultraviolet resistance of harmful microorganisms was also studied. Combining these findings with the original facilities of the site museum, a scientific and reasonable project was proposed to control and prevent the activity of harmful microorganisms. In addition, a 1% OIT/DCOIT biocide concentration was applied to inhibit microorganism-caused deterioration, in combination with mechanical removal based on laboratory tests and screening in situ. The effectiveness of microbial control was assessed using a portable microscope, ATP bioluminescence assay, and color difference detection. As a long-lasting preventive measure for microbial deterioration, an ultraviolet sterilization system can efficaciously prevent the re-outbreak of microbial deterioration to form a relatively stable dynamic balance for the surroundings of the site. This study is a resultful exploration in terms of microbial control and plays an important role in the sustainable protection of archaeological site museums. [ABSTRACT FROM AUTHOR]

Illegal archaeological excavations, generally denoted as looting, is one of the most important damage factors to cultural heritage, as it upsets the human occupation stratigraphy of sites of archaeological interest. Looting identification and monitoring are not an easy task. A consolidated instrument used for the detection of archaeological features in general, and more specifically for the study of looting is remote sensing. Nevertheless, passive optical remote sensing is quite ineffective in dense vegetated areas. For these type of areas, in recent decades, LiDAR data and its derivatives have become an essential tool as they provide fundamental information that can be critical not only for the identification of unknown archaeological remains, but also for monitoring issues. Actually, LiDAR can suitably reveal grave robber devastation, even if, surprisingly, up today LiDAR has been generally unused for the identification of looting phenomenon. Consequently, this paper deals with an approach devised ad hoc for LiDAR data to detect looting. With this aim, some spatial visualization techniques and the geomorphon automatic landform extraction were exploited to enhance and extract features linked to the grave robber devastation. For this paper, the Etruscan site of San Giovenale (Northern Lazio, Italy) was selected as a test area as it is densely vegetated and was deeply plundered throughout the 20th century. Exploiting the LiDAR penetration capability, the prediction ability of the devised approach is highly satisfactory with a high rate of success, varying from 85–95%. [ABSTRACT FROM AUTHOR]

In early 2017, an astonishing number of archaeological finds were unearthed during the excavation of two sites in Molnár Street (Budapest), led by the archaeologists of the Budapest History Museum. As the construction works of a new hotel took place on a registered archaeological site, and historical monuments of the city were expected to be found, the presence of archaeological professionals became essential. Even though the location was inhabited for centuries, the early modern and medieval layers were found unaffected. Because of the nature of the site, the wet and muddy soil layers along the Danube provided a favourable environment for the preservation of organic materials and metals. As the climatic conditions in the Carpathian Basin are less favourable for the survival of organic material, the findings are very special both on a local and a broader regional level. In the Middle Ages, the Danube flowed over a much wider area than it does today. Today's embankment was often under water due to its proximity to the river, especially in the days before its regulation. The population, accustomed to the threat of spring floods, built their houses much further inland and along the river. Only urban landfills and, in safer times, ports and loading docks were established. The aim of this paper is to specify past ground levels along the river, and changes in the water levels as well as the path of the Danube, with the help of as many environmental archaeological methods as possible. Similar research was already conducted on Margaret Island, in Vác and in Visegrád, so this new case study is hoped to be a useful contribution to reconstructing past landscapes along the river. [ABSTRACT FROM AUTHOR]

This paper illustrates the results obtained by using pre-trained semantic segmentation deep learning models for the detection of archaeological sites within the Mesopotamian floodplains environment. The models were fine-tuned using openly available satellite imagery and vector shapes coming from a large corpus of annotations (i.e., surveyed sites). A randomized test showed that the best model reaches a detection accuracy in the neighborhood of 80%. Integrating domain expertise was crucial to define how to build the dataset and how to evaluate the predictions, since defining if a proposed mask counts as a prediction is very subjective. Furthermore, even an inaccurate prediction can be useful when put into context and interpreted by a trained archaeologist. Coming from these considerations we close the paper with a vision for a Human–AI collaboration workflow. Starting with an annotated dataset that is refined by the human expert we obtain a model whose predictions can either be combined to create a heatmap, to be overlaid on satellite and/or aerial imagery, or alternatively can be vectorized to make further analysis in a GIS software easier and automatic. In turn, the archaeologists can analyze the predictions, organize their onsite surveys, and refine the dataset with new, corrected, annotations. [ABSTRACT FROM AUTHOR]

This paper intends to apply the Intelligent Wireless Sensor Network (IWSN) to the archaeological excavation site and make the dynamic site of archaeological excavation can be monitored intelligently in real-time. This paper firstly discusses the structure and function of Wireless Sensor Network (WSN). Secondly, according to the problem of limited dynamic monitoring of WSN, an IWSN is established. The dynamic environmental monitoring of archaeological excavation sites is achieved by using Geographic Information System (GIS) and remote sensing technology combined with IWSN. Finally, this paper analyses the environmental monitoring results of the archaeological excavation site, the dynamic environmental monitoring location of the archaeological excavation site of the IWSN, and the simulation results of the Intelligent Wireless Sensor Network-Geographic Information System (IWSN-GIS) in the dynamic environmental monitoring of the archaeological excavation site. The results show that the Inverse Distance to a Power (IDP) algorithm in temperature and humidity monitoring data on the overall downward trend, the algorithm performance is relatively stable, and the algorithm performance is better than the other two algorithms. The monitoring performance of IWSN-GIS system is better than that of IWSN system. It shows that with the increase in the communication distance of sensor nodes, the relative error of different monitoring systems for the dynamic monitoring position of the archaeological excavation site is decreasing. IWSN-GIS can monitor the environment before, during, and after the archaeological site. This paper realizes the intelligent, scientific, and technological archaeology of archaeological excavation through IWSN, GIS, and remote sensing image technology, and provides technical support for digital archaeology in archaeological research. [ABSTRACT FROM AUTHOR]

In this paper, we present a comparison of two rural landscapes in the southeast of the Iberian Peninsula, where the dynamics of occupation have differed since the end of the ancient world in terms of both the degree of resilience of settlements and the land use. Our purpose was to explore the social, political, economic, and environmental factors that could explain why there has been a long-term cross-cultural occupation of some resilient sites and landscapes for almost a millennium, while there have been only very specific temporary occupations in other areas. The first part of this paper describes the archaeological investigations carried out by means of intensive survey methods, geophysics, and some excavations in peripheral and peri-urban spaces. In the second part, we reflect on whether the use of the same methodology in all cases allows us to compare and understand what makes societies sustainable (or not) over time through their archaeological record. [ABSTRACT FROM AUTHOR]

Over a six-month period from late January to early August 2021 the Historic Environment Department of the Department of Culture and Tourism (DCT) Abu Dhabi carried out archaeological monitoring along a 11.5km stretch of a project to renew the existing border fence between the United Arab Emirates and Oman within the oasis city of Al Ain.The scope and sequence of the construction project determined the excavation and recording methodology employed. The trench was roughly straight-sided, 3.5m wide by 3–4m deep and entailed machine excavation of more than a million cubic meters. Documentation of this trench, which proceeded at an average distance of 80m a day, has informed our understanding of the landscape, identified locations for future archaeological work and assisted our ongoing efforts to manage and protect the historic environment. The project produced new data on the development of the historic oasis landscape of Al Ain, a UNESCO World Heritage property. Some of the most significant features revealed include a monumental stone tomb from the Late Bronze Age (2000–1300 BCE), an extensive Iron Age (1200-300 BCE) cemetery, high-status tombs of Late Pre-Islamic date (300 BCE–300 CE) and more than 50 ancient aflāj or underground water channels of various dates and techniques of construction, along with extensive evidence for distinct phases of Iron Age agriculture.Photogrammetry recording sessions numbered nearly three hundred in total, together creating a series of consecutive overlapping 3D models from which ortho-rectified images in plan and section have been produced for each of the zones along the trench route.This paper discusses the recording practice and workframe as it evolved over the course of the project, and the challenges found during the data acquisition phase in terms of the construction environment, lighting, geometry, tools, time and team size. It presents the system used to manage the digital data archive needed to keep track of 288 recorded photogrammetry sessions, along with the related ground control points survey. The paper discusses the challenges and available solutions for rapid processing and delivery of geo-referenced 3D models and ortho-rectified images generated throughout the project. It concludes with some general remarks on the peculiarly linear challenge of presenting the results of an archaeological excavation 11.5km long and 3.5m wide in both digital and hard-copy formats. [ABSTRACT FROM AUTHOR]

GIS tools in archaeology have become fundamental for professionals and researchers around the world. In recent years, the "3D revolution" has drastically changed archaeological practices and methods, including the use of GIS. This paper presents the results of a project aimed at building an integrated system for the management and study of archaeological data in 2D and 3D, connecting GIS to BIM. Building Information Modeling (BIM) is an innovative technology developed for architectural design and planning, and later adapted for cultural heritage and historic buildings (HBIM). More recently, it has been tested on archaeological sites. Some attempts have been made to connect landscape scale GIS projects with BIM models of individual buildings. However, these have not been applied specifically to archaeology thus far. Through the use of open-source software, a seamless workflow from data collection in GIS to 3D visualization and modeling in a native OpenBIM environment has been created. The paper illustrates this methodology with a case study about Altinum, a Roman city in northeastern Italy near Venice. The GIS component of the project manages the archaeological map of the city, while the OpenBIM application allows the virtual reconstruction of the sites. For the latter, the case of the ancient city-gate of Altinum is considered and explained. [ABSTRACT FROM AUTHOR]

An introduction is presented in which the editors discuss articles in the issue on topics including narratives of archaeogenetics in relation to different audiences, the genetic interpretation of the spread of human populations, and the impact of the Third Science Revolution on archaeology.

Archaeological site text is the main carrier of archaeological data at present, which contains rich information. How to efficiently extract useful knowledge from the massive unstructured archaeological site texts is of great significance for the mining and reuse of archaeological information. According to the site information (such as name, location, cultural type, dynasty, etc.) recorded in the Chinese archaeological site text, this paper combines deep learning and natural language processing techniques to study the information extraction method for automatically obtaining the spatio-temporal information of sites. The initial construction of the corpus of Chinese archaeological site text is completed for the first time, and the corpus is input into the Bidirectional Long Short-Term Memory with Conditional Random Fields (BiLSTM-CRF) entity recognition model and Bidirectional Gated Recurrent Units with Dual Attention (BiGRU-Dual Attention) relationship extraction model for training. The F1 values of BiLSTM-CRF model and BiGRU-Dual Attention model on the test set reach 87.87% and 88.05%, respectively. The study demonstrates that the information extraction method proposed in this paper is feasible for the Chinese archaeological site texts, which promotes the establishment of knowledge graphs in archaeology and provides new methods and ideas for the development of information mining technology in archaeology. [ABSTRACT FROM AUTHOR]