Search

Fallacia is distinguished morpho‐anatomically from Navicula sensu lato based on the possession of an H‐shaped chloroplast, lateral sterna and a finely porous conopeum, but whether this genus is monophyletic is still in question. Three new Fallacia species are described based on morphology and SSU rRNA and rbcL gene sequences: Fallacia tateyamensis sp. nov., Fallacia bosoensis sp. nov. and Fallacia laevis sp. nov. We performed the first comprehensive molecular and morphological phylogenetic analyses of 31 Fallacia species based on 11 new sequences from six species and 23 morphological characters. We also documented the detailed morphogenesis of Fallacia for the first time. Fallacia is not monophyletic. Both morphological and DNA sequence data supported the separation of Rossia from Fallacia, while the phylogenetic position of Pseudofallacia is uncertain. We recognized four morphogroups in Fallacia by morphological and molecular phylogenetic analyses. Ancestral character reconstruction indicated that diatoms in Sellaphoraceae evolved from the possession of two lateral narrow parallel depressions covered by narrow nonporous conopea, to lyre‐shaped canals covered by wide porous conopea. Lanceolate canals and the presence of areolae in canals evolved multiple times independently. [ABSTRACT FROM AUTHOR]

Over the past decade, enhanced computing capabilities and mobile technologies have begotten the upsurge of innovative mobile health (mHealth) solutions, and many research efforts have occurred recently in the area of technology-based interventions (TBI) for autism spectrum disorders (ASD). Mobile augmented reality (MAR) refers to AR systems that use the handheld mobile device medium (mobile phones, tablets or smart glasses). This article reports the results of a systematic review undertaken on the use of MAR for ASD-related skills learning from the year 2010. It aims to provide an insight into the current state of research on MAR interventions and to provide guidance to relevant designers and researchers. We searched seven databases and retrieved 625 articles initially. After exclusion and screening, 36 articles were reviewed reporting on using MAR to improve various skills of children and adolescents with ASD, and 10 research questions related to PICO (P: Population, I: Intervention, C: Comparison, O: Outcomes) were addressed. This study identifies challenges that still exist in the research efforts towards the development of applications exploiting the MAR for ASD interventions: technology issues, research design consideration, subjective assessment etc. The studies examined suggest researchers should focus on users and improve the quality of the MAR app. In addition, more effective research methods and evaluation methods could be involved in future studies to facilitate the development of MAR intervention applications. [ABSTRACT FROM AUTHOR]

In marker-based augmented reality (AR) systems, markers are usually relatively independent and predefined by the system creator in advance. Users can only use these predefined markers to complete the construction of certain specified content. Such systems usually lack flexibility and cannot allow users to create content freely. In this paper, we propose a virtual marker technique to build a marker-based AR system framework, where multiple AR markers including virtual and physical markers work together. Information from multiple markers can be merged, and virtual markers are used to provide user-defined information. We conducted a pilot study to understand the multi-marker cooperation framework based on virtual markers. The pilot study shows that the virtual marker technique will not significantly increase the user's time and operational burdens, while actively improving the user's cognitive experience. [ABSTRACT FROM AUTHOR]

Since electronic components are constantly getting smaller and smaller, sensors and logic boards can be fitted into smaller enclosures. This miniaturization lead to the development of smart rings containing motion sensors. These sensors of smart rings can be used to recognize hand/finger gestures enabling natural interaction. Unlike vision-based systems, wearable systems do not require a special infrastructure to operate in. Smart rings are highly mobile and are able to communicate wirelessly with various devices. They could potentially be used as a touchless user interface for countless applications, possibly leading to new developments in many areas of computer science and human–computer interaction. Specifically, the accelerometer and gyroscope sensors of a custom-built smart ring and of a smartwatch are used to train multiple machine learning models. The accuracy of the models is compared to evaluate whether smart rings or smartwatches are better suited for gesture recognition tasks. All the real-time data processing to predict 12 different gesture classes is done on a smartphone, which communicates wirelessly with the smart ring and the smartwatch. The system achieves accuracy scores of up to 98.8%, utilizing different machine learning models. Each machine learning model is trained with multiple different feature vectors in order to find optimal features for the gesture recognition task. A minimum accuracy threshold of 92% was derived from related research, to prove that the proposed system is able to compete with state-of-the-art solutions. [ABSTRACT FROM AUTHOR]

Augmented reality (AR)-based surgical navigation may offer new possibilities for safe and accurate surgical execution of complex osteotomies. In this study we investigated the feasibility of navigating the periacetabular osteotomy of Ganz (PAO), known as one of the most complex orthopedic interventions, on two cadaveric pelves under realistic operating room conditions. Preoperative planning was conducted on computed tomography (CT)-reconstructed 3D models using an in-house developed software, which allowed creating cutting plane objects for planning of the osteotomies and reorientation of the acetabular fragment. An AR application was developed comprising point-based registration, motion compensation and guidance for osteotomies as well as fragment reorientation. Navigation accuracy was evaluated on CT-reconstructed 3D models, resulting in an error of 10.8 mm for osteotomy starting points and 5.4° for osteotomy directions. The reorientation errors were 6.7°, 7.0° and 0.9° for the x-, y- and z-axis, respectively. Average postoperative error of LCE angle was 4.5°. Our study demonstrated that the AR-based execution of complex osteotomies is feasible. Fragment realignment navigation needs further improvement, although it is more accurate than the state of the art in PAO surgery. [ABSTRACT FROM AUTHOR]

SUMMARY: "Monitoring Sites 1000" – Japan's long‐term monitoring survey was established in 2003, based on the Japanese Government policy for the conservation of biodiversity. Ecological surveys have been conducted on various types of ecosystems at approximately 1000 sites in Japan for 15 years now and are planned to be carried out for 100 years. Since 2008, seaweed communities had been monitored at six sites, featuring the kelp (e.g. Saccharina and Ecklonia; Laminariales) and Sargassum (Fucales) communities in the subarctic and temperate regions of Japan. Annual surveys were carried out during the season when these canopy‐forming seaweeds are most abundant. A non‐destructive quadrat sampling method, with permanent quadrats placed along transects perpendicular to the shoreline, was used to determine species composition, coverage, and vertical distribution of seaweeds at these sites; while destructive sampling was done every 5 years to determine biomass. The occurrence of canopy‐forming species Saccharina japonica (var. japonica) and Ecklonia cava have appeared to be stable at the Muroran (southwestern part of Hokkaido Island) and Shimoda (Pacific coast of middle Honshu Island) sites, respectively; whereas the coverage of Ecklonia radicosa (= Eckloniopsis radicosa) at the Satsuma‐Nagashima site in southern part of Kyushu Island was highly variable until its sudden disappearance from the habitat in 2016. Thalli of E. radicosa lost most of their blades through browsing by herbivorous fish, and thus, this may be one of the causes of the decline. A shift in the community structure related to environmental changes had also been observed at some other sites. Pre‐ and post‐disaster data revealed the impact of the 2011 earthquake and tsunami disasters, including a shift in the vertical distribution of Ecklonia bicyclis (= Eisenia bicyclis) to shallower depths at the Shizugawa site in the Pacific coast of northern Honshu Island, due to seafloor subsidence. [ABSTRACT FROM AUTHOR]

SUMMARY Thallus mechanical strength, as well as production of secondary metabolites as defensive compounds, of tropical macroalgae is often essential for protection from herbivory. In tropical macroalgae, thallus mechanical strength is negatively correlated with productivity — a trade‐off between productivity and thallus toughness. The tropical fucoids, Turbinaria ornata which has defensive morphological traits against herbivory and Sargassum ilicifolium which is expanding its distribution in Japanese waters, were examined to determine thallus traits related to mechanical strength and productivity and their pair‐wise relationships were also examined. These traits that are directly or indirectly related to the trade‐off between productivity and thallus toughness were compared to data for various other temperate macroalgae by regression analyses. We found two strong positive correlations between thallus mechanical strength and thallus mass or thallus thickness, confirming that higher levels of mechanical strength for tropical fucoids is associated with higher biomass or thallus thickness. Also, negative correlations between thallus toughness and productivity were found indicating structural and physiological trade‐offs. However, the tropical fucoids exhibited relatively high productivity regardless of their higher level of thallus toughness. These traits of the tropical fucoids slightly deviate from the typical conservative strategy with higher thallus toughness and lower productivity as a trade‐off between productivity and thallus toughness. [ABSTRACT FROM AUTHOR]

SUMMARY Trade‐offs are considered key to understanding mechanisms supporting the coexistence of multiple plant species. Thus, understanding the mechanisms underlying trade‐offs is expected to contribute to conservation and management of macroalgal beds composed of diverse macroalgae of rocky shore ecosystems. To test the occurrence of trade‐offs between productivity and thallus toughness as well as pair‐wise thallus trait relationships that are expected to indirectly relate to any trade‐offs, traits and relationships for 13 species of macroalgae from the central area along the Japan Sea coast of Honshu, Japan were examined. In each species we examined for photosynthetic capacity per unit biomass (as Amass) and nitrogen (i.e., photosynthetic nitrogen‐use efficiency, PNUE), nitrogen content (as Nmass), thallus mass per unit thallus area (as TMA) and force required to penetrate the thallus (as Fp, a common index of leaf toughness in land plants by punch test). A significant negative correlation indicating a trade‐off between productivity and thallus toughness was found between Amass or PNUE and Fp. Pair‐wise relationships that were expected to indirectly relate to the trade‐off were as follows. Amass was positively correlated with Nmass. Thalli with high Nmass extensively utilizing nitrogen in the photosynthetic parts, and consequently exhibiting elevated metabolic rates. Moreover, thalli with high Nmass tended to be associated with low TMA, and Nmass decreased with increasing TMA. A significant negative correlation was observed between TMA and Amass or PNUE because of the linkage of high Amass or PNUE with high Nmass and high Nmass associated with low TMA, while a significant positive correlation was observed between TMA and Fp. The two correlations indicate a physiological and structural trade‐off, which underlies the interdependency of thallus traits. Results of multivariate analyses also indicated that the thallus traits interdependently vary across a single axis based on the trade‐off. [ABSTRACT FROM AUTHOR]

Byline: Xiaodi Huang, Dianhui Wang, Kazuo Misue, Jiro Tanaka, A.S.M. Sajeev Graphs traditionally have many applications in various areas of computer science. Research in graph-based data mining has recently gained a high level of attraction due to its broad range of applications. Examples include XML documents, web logs, web searches and molecular biology. Most of the approaches used in these applications focus on deriving interesting, frequent patterns from given datasets. Two fundamental questions are, however, ignored; that is, how to derive a graph from a set of objects and how to order nodes according to their relations with others in the graph. In this paper, we provide approaches to building a graph from a given set of objects accompanied by their feature vectors, as well as to ranking nodes in the graph. The basic idea of our ranking approach is to quantify the important role of a node as the degree to which it has direct and indirect relationships with other nodes in a graph. A method for visualising graphs with ranking nodes is also presented. The visual examples and applications are provided to demonstrate the effectiveness of our approaches.

Three new species of Fallacia, F. miyajimensis sp. nov., F. nodulifera sp. nov., and F. similigemmifera sp. nov. are described from intertidal sediments in Japan. Their morphologies are studied with light, scanning and transmission electron microscopy. Fallacia miyajimensis differs from congeners in the presence of an apical pore, a finely porous conopeum possessing finger-shaped extensions with uniseriate rows of pores and a thick layer adjacent to the raphe with isolated depressions with small pores inside. Fallacia nodulifera differs from congeners in the presence of a unique asymmetric internal central nodule. It can also be distinguished by the combination of stria density, conopeum with short extensions, and centrally convex lateral sterna. Fallacia similigemmifera differs from congeners by its lanceolate valve outline, more or less straight, distinct lateral areas and the presence of a rectelevatum on internal central nodule. We suggest that the structural combination of the structure of the conopeum and the lateral sterna is a stable feature in species discrimination and could be used to define species groups. The cingulum of F. similigemmifera comprises a wide open valvocopula and two linear bands with different ligulae. This type of cingulum structure is also present in F. tenera, F. hodgeana, and probably in F. litoricola and F. fracta as well, and likely occurs commonly in Fallacia. [ABSTRACT FROM AUTHOR]

SUMMARY We monitored an Eisenia bicyclis kelp bed during a survey of the rocky coast subtidal zone of Shizugawa Bay, the Sanriku Coast, northeastern Honshu, Japan, from 23 July 2008, to detail the biodiversity, which was subsequently directly impacted by the 2011 Great East Japan Earthquake (GEJE). To assess temporal changes in abundance of the dominant canopy forming kelp E. bicyclis and in the distribution patterns of macroalgae along a water depth gradient, percent coverage of macroalgae has been observed in permanent quadrats set near the lower limit of the Eisenia bed and in quadrats set along a water depth gradient. The GEJE, which induced huge tsunami waves and coseismic seafloor subsidence, occurred during the monitoring survey period and also affected the coastal communities in Shizugawa Bay. After the GEJE, the cover of E. bicyclis within the permanent quadrats near the lower limit of E. bicyclis gradually declined, and reached zero by July 2014. Also in the line transect survey, the offshore (deep) edge of the Eisenia bed showed a tendency to shift shoreward (upward) after the GEJE; the Eisenia bed near the pre‐earthquake offshore (deep) edge declined and finally disappeared after the GEJE. Combined with results of the permanent quadrat and line transect surveys, the post‐earthquake gradual decline and subsequent complete disappearance of the Eisenia bed within the permanent quadrats probably indicates an upward shift of the deep edge of the subsided kelp bed. Gradual change in the E. bicyclis bed over 2 years after the GEJE is a unique opportunity to document the response of a kelp bed to coseismic subsidence, demonstrating the slow and prolonged recovery process of E. bicyclis to subsidence caused by the mega‐earthquake to the pre‐earthquake depth zone. [ABSTRACT FROM AUTHOR]

SUMMARY Trade-off relationships are considered key to understanding the mechanisms supporting the coexistence of multiple species within kelp beds. Thus, information on trade-offs is expected to contribute to conservation of kelp bed diversity. To test the existence of a trade-off between productivity and thallus toughness, thallus traits and relationships between the traits were examined for seven species of Laminariales including 24 populations. For each population, photosynthetic capacity per unit biomass (as A mass) and nitrogen (i.e., photosynthetic nitrogen-use efficiency, PNUE), nitrogen content (as N mass), thallus mass per unit thallus area (as TMA) and force required to penetrate the thallus (as F p, a common index of leaf toughness in land plants by punch test) were determined. A mass increased with increasing N mass. Blades with high N mass showed high A mass. These blades may invest a large proportion of nitrogen to the photosynthetic parts, and consequently exhibit high metabolic rates. Moreover, blades with high N mass tended to be associated with low TMA, and N mass decreased with increasing TMA. A significant negative correlation was observed between TMA and A mass because of the linkage of high A mass with high N mass and high N mass associated with low TMA, while a significant positive correlation was observed between TMA and F p. The two correlations indicate the existence of a trade-off between productivity and thallus toughness in Laminariales. PNUE showed a significant negative correlation with TMA, which also showed a significant positive correlation with F p as the index of thallus toughness, and therefore a trade-off relationship between productivity and thallus toughness. [ABSTRACT FROM AUTHOR]

Social cognitive skills are indispensable for successful communication with others. Substantial research has determined deficits in these abilities in patients with mental disorders. In neurobiological development and continuing into adulthood, cross-cultural differences in social cognition have been demonstrated. Moreover, symptomatic patterns in mental disorders may vary according to the cultural background of an individual. Cross-cultural studies can thus help in understanding underlying (biological) mechanisms and factors that influence behavior in health and disease. In addition, studies that apply novel paradigms assessing the impact of culture on cognition may benefit and advance neuroscience research. In this review, the authors give an overview of cross-cultural research in the field of social cognition in health and in mental disorders and provide an outlook on future research directions, taking a neuroscience perspective. [ABSTRACT FROM PUBLISHER]