Search

The present work deals with the design of a traction system for a hybrid vehicle using a PMSM-type motor, including an energy regeneration stage, using a Neutral Point Piloted (NPP) inverter. Optimal operation allows the motor to be supplied in the traction stage with the correct energy in such a way that it operates properly; on the other hand, during braking, it facilitates the transfer of energy in regenerative mode to the DC bus, storing the greatest amount of energy in the storage elements, which, in this case, refers to a battery bank. It also includes a DC-DC bidirectional boost interleaved converter to regulate the DC voltage levels both in traction and in braking. Its fundamental characteristic is that with a reduced number of switching devices, it allows for the reduction in DC voltage of the DC bus with adequate characteristics, constant and stable, regardless of abrupt changes in the output voltage reference value. Also, other features include oscillation control, that is, reducing or increasing oscillations according to operating conditions. Its transient operation is excellent, since the settling time is considerably reduced, which implies that the voltage of the DC bus does not cause mishaps in the operation of the motor. In its operation as a boost converter, in the event of any voltage value of the DC bus, the converter raises the voltage value according to the reference conditions. Similarly, control allows the voltage to be held at a stable value regardless of changes in the set point. This work presents a novel energy management scheme for permanent magnet electric drive based on a Model Predictive Control strategy, thus contributing to the effective energy management of a standard hybrid electric vehicle driving cycle. Results obtained using a real-time Hardware-in-the-Loop (HIL) platform showed the effectiveness of Model Predictive Control in dealing with power flow management while ensuring control of electric drive in all the required speed–torque profiles. [ABSTRACT FROM AUTHOR]

In order to simultaneously improve the fuel economy and overall performance of plug-in hybrid electric vehicles (PHEVs), this study selected the P1 + P3 configuration as its research object. Through a configuration analysis of hybrid vehicles, it confirmed the feasibility of P1 + P3 configuration-PHEV operating modes. Based on this, a rule-based control strategy was developed, and simulation models for the entire vehicle and control strategy were constructed in both Cruise and MATLAB/Simulink software. The study conducted simulation analysis by combining three sets of Worldwide Harmonized Light vehicles Test Cycle (WLTC) driving cycles to assess the fuel-saving potential of the dual-motor P1 + P3 configuration. The simulation results showed that the vehicle model was reasonably constructed and the proposed control strategy had good control effects on the entire vehicle. Compared to conventional gasoline vehicles, the P1 + P3 configuration PHEV achieved a 67.4% fuel economy improvement, demonstrating a significant enhancement in fuel efficiency with the introduction of electric motors. [ABSTRACT FROM AUTHOR]

In order to explore the influence of the thermal management system (TMS) on vehicle energy management and tap the energy saving potential of TMS, this study establishes a vehicle energy management strategy control model oriented to reduce energy consumption of the TMS based on MATLAB/Simulink for a plug-in hybrid electric vehicle with planetary hybrid configuration. Firstly, a simulation model of vehicle dynamic machine - electric - thermal coupling working process is introduced, to evaluate the impact of TMS in the high and low temperature environment on energy consumption of the vehicle running. Then, based on the equivalent fuel consumption minimum strategy (ECMS) and considering the influence of TMS on energy consumption, an adaptive equivalent consumption minimum strategy model considering thermal characteristics (TAECMS) is established, which propose an improved adaptive equivalent factor adjustment method considering the thermal characteristics of the system is proposed. By establishing the Hamiltonian function to achieve the goal of minimum equivalent fuel consumption, considering the temperature penalty, the power of the engine and the power of the battery is reasonably allocated. Finally, the TAECMS control strategy achieves fuel saving of 6.2 % and 8.4 % respectively in high and low temperature environments through simulation verification and comparison. [ABSTRACT FROM AUTHOR]

Ever stricter emission regulations, declining petroleum resources, increasing pollution, and global warming triggered an interest in e-mobility. Although fully electrified transportation is targeted, hybrid electric vehicles have become attractive during this transition period due to reasons such as battery challenges, range anxiety, grid capacity, and charging infrastructure. Hybrid electrical vehicles require challenging energy management systems due to the increasing number of components and energy conversions. This paper aims to introduce a simple yet effective control scheme to control the battery state-of-charge (SOC) and regenerative braking of a hybrid electric vehicle. For this purpose, a fuzzy logic controller is developed, three inputs as the SOC, driver demand, and vehicle velocity are defined. Instead of torque or power requirement, which are commonly used as controller inputs in the literature, a more straightforward method is adopted by using the accelerator and brake pedal positions. The controller manages the engine power and regenerative braking intensity. A series hybrid electric vehicle model is created in the MATLAB/Simulink environment to validate the performance of the proposed controller. The proposed controller aims to keep the SOC between 30-40% after charge depleting mode, and ensures prevention of regenerative braking at high SOC values to prevent overcharging. Simulations have been performed according to NEDC and WLTC, show that the proposed controller is able to realize design objectives. [ABSTRACT FROM AUTHOR]

The Equivalent Consumption Minimization Strategy (ECMS) is a well-known control strategy for the definition of optimal power-split in hybrid-electric vehicles, because of its effectiveness and reduced calibration effort. In this kind of Energy Management Systems (EMS), the correct identification of an equivalence factor (K), which translates electric power in equivalent fuel consumption, is of paramount importance. To guarantee charge sustaining operation, the K factor must be adjusted to different mission profiles. Adaptive ECMS (A-ECMS) techniques have thus been introduced, which automatically determine the optimal equivalence factor based on the vehicle mission. The aim of this research activity is to assess the potential in terms of fuel consumption and charge sustainability of different A-ECMS techniques on a gasoline hybrid-electric passenger car. First, the 0D vehicle and powertrain model was developed in the commercial CAE software GT-SUITE. An ECMS-based EMS was used to control the baseline powertrain and three alternative versions of an auto-adaptive algorithm were implemented on top of that. The first A-ECMS under study was based on feedback from the battery State of Charge, while the second and third on a Driving Pattern Recognition/Prediction algorithm. Fuel consumption was assessed using the New European Driving Cycle (NEDC), the Worldwide Harmonized Light Vehicles Test Cycle (WLTC) and Real Driving Emissions (RDE) driving cycles by means of numerical simulation. A potential improvement of up to 4% Fuel Economy was ultimately achieved on an RDE driving cycle with respect to the baseline ECMS. [ABSTRACT FROM AUTHOR]

The main contribution of this study is to introduce deep reinforcement learning (DRL) within the model prediction control (MPC) framework, and consider comprehensive economic objectives including fuel cell degradation costs, lithium battery aging costs, hydrogen consumption costs, etc. This approach successfully mitigated the inherent shortcomings of deep reinforcement learning, namely poor generalization and lack of adaptability, thereby significantly enhancing the robustness of economic driving decision in unknown scenarios. In this study, an MPC framework was developed for the energy management problem of fuel cell vehicles, and Bi-directional Long Short-Term Memory (Bi-LSTM) neural network was used to construct a vehicle speed predictor The accuracy of its prediction was verified through comparative analysis, and then it was regarded as a DRL model. Different from the overall strategy of the entire driving cycle, the model based DRL agent can learn the optimal action for each vehicle state. The simulation evaluated the impact of different predictors and prediction ranges on hydrogen economy, and verified the adaptability of the proposed strategy in different driving environments, the stability of battery state maintenance, and the advantages of delaying energy system degradation through comprehensive comparative analysis. • A health-conscious EMS framework based on deep reinforcement learning in MPC framework is proposed. • Fuel cell degradation model and lithium battery aging model are adopted to provide more perfect indicators for economic driving. • The advanced Bi-LSTM is used to construct the vehicle speed predictor in comparison with the benchmark LSTM. [ABSTRACT FROM AUTHOR]

The key challenge in the innovation of hybrid electric vehicles is the energy management control strategies to split the energy between the sources. The objective of adding an auxiliary source of power to vehicles is to minimize battery stress as well as energy consumption rate (ECR) of the main source and to increase the range of the vehicle. Based on Taguchi and grey relational analysis, the optimal control factors were determined for each of the desired performance factors. In this experimental design, control strategy, vehicle model, battery SOC, and UC SOC are considered as control factors, and ECR, range of the vehicle, and battery stress remain as vehicle performance factors. The confirmatory results show the minimal error between the initial set and the optimum factor to be 7.68 for ECR, 8.54 for range, and 5.49 for battery stress, respectively. The results also reveal the importance of fuzzy-based strategy on hybridization of energy storage systems in electric vehicles and also identified the most and the least influencing factors that affect the vehicle performance. [ABSTRACT FROM AUTHOR]

To fulfil future demand for energy and to control pollution, a power-split hybrid electric vehicle is a promising solution combining attributes of a conventional vehicle and an electric vehicle. Since energy is available from two subsystems i.e, engine and battery, there is the freedom to manage it optimally. In this work, model predictive control strategy, that has the constraint handling which makes it a better choice over other strategies for efficient energy management of hybrid electric vehicles. A detailed mathematical model of the power split configured hybrid electric vehicle is developed that encompasses the engine, planetary gear, motor/generator, inverter, and battery. An interior-point optimizer based-nonlinear model predictive control strategy is applied to the developed model by incorporation of operational constraints and cost function. The objective is to curtail fuel consumption while the battery's state of charge should be maintained within predefined limits. The complete developed model was simulated in MATLAB for motor, generator, engine speed, and battery SoC. Computed specific fuel consumption from the proposed MPC during the NEDC and the HWFET cycles are 4.356liters/100km and 2.474 litres/100 km, respectively. These findings are validated by the rule-based strategy of ADVISOR 2003 that provides 4.900 litres/100 km and 3.600 litres/100 km over the NEDC and the HWFET cycles, respectively. This indicates that the proposed MPC shows 11.11 % and 31.26 % improvement in specific fuel consumption in the NEDC and HWFET drive cycles respectively. [ABSTRACT FROM AUTHOR]

Energy management strategies can improve fuel cell hybrid electric vehicles' dynamic and fuel economy, and the strategies based on model prediction control show great advantages in optimizing the power split effect and in real time. In this paper, the influence of prediction horizon on prediction error, fuel consumption, and real time was studied in detail. The framework of energy management strategy was proposed in terms of the model prediction control theory. The radial basis function neural network was presented as the predictor to obtain the short-term velocity in the future. A dynamic programming algorithm was applied to obtain optimized control laws in the prediction horizon. Considering the onboard controller's real-time performance, we established a simple fuel cell vehicle mathematical model for simulation. Different prediction horizons were adopted on UDDS and HWFET to test the influence on prediction and energy management strategy. Simulation results showed the strategy performed well in fuel economy and real-time performance, and the prediction horizon of around 20 s was appropriate for this strategy. [ABSTRACT FROM AUTHOR]

[Display omitted] • Novel predictive ECMS algorithm for hybrid trucks based on projected power demand. • Algorithm operation validated on commercial plug-in hybrid electric truck. • Up to 5.9% energy efficiency gains over a municipal operation profile. • Power-predictive ECMS for energy management brings real CO 2 benefits. This paper examines potential fuel consumption savings through the implementation of a predictive equivalent consumption minimisation strategy, as a control algorithm in the energy management system of hybrid heavy-duty vehicles. A plug-in hybrid electric truck simulation model was developed as a demonstrator and was validated with experimental data. The baseline vehicle model was based on the same algorithm as VECTO, which is further extended in the current study by novel factors that contain the average predicted power demand. The potential benefits of the proposed algorithm are examined for different heavy-duty categories over regulatory mission profiles in both charge-sustain and charge-depletion modes. The results show that the fuel consumption can be reduced by up to 5.9 % and 4.4% in charge sustaining and charge depleting modes, respectively, depending on the mission profile. If such an algorithm is adopted by commercial vehicles, this could lead to substantial CO 2 and fuel consumption savings on the road. [ABSTRACT FROM AUTHOR]

Summary: Electric vehicle (EV) is considered as a critical requirement to the future development of transportation. However, the battery performance in terms of power density and energy density limits the use of EVs. An energy management system (EMS) of plug‐in hybrid electric vehicle (PHEV) is very critical to achieve successful transition from the conventional vehicle to the pure electric vehicle (PEV). This paper proposes a hybrid EMS for the series‐parallel PHEV utilising a rule‐based control strategy and genetic algorithm (GA)‐based optimisation technique to overcome the battery limitations. A mathematical model was developed and verified by conducting simulation studies using the vehicle model from ADVISOR database and the GA Optimization Toolbox (GAOT) in the Matlab Simulink environment. The simulation results show that the GA optimization successfully achieved the sub‐targets set in the fitness function. To show the effectiveness of the proposed technique, the results were compared with the simulation results of a single function of the designed rule‐based control strategy—the proposed EMS achieved a significant improvement in the hydrocarbon (HC) emission and NOx emission. [ABSTRACT FROM AUTHOR]

In this paper, in order to extend battery lifespan and lift power performance in hybrid batteries/supercapacitors electrical vehicles, a new energy management strategy is proposed based on model prediction control and adaptive method. Firstly, models of batteries and supercapacitors are built, which are then adapted and simplified to develop state space expression. Secondly, a series of reference values of battery power and supercapacitor state of charge for model prediction methods are properly calculated by the adaptive method. Thereafter, an energy management strategy based on the model prediction control method is designed to allocate the output power of batteries and supercapacitors within constraints, which guarantees batteries lifespan and the power performance of vehicle. Finally, simulation and experiment results are provided to evaluate battery lifespan and power performance of vehicles under HWFET and UDDS road conditions. The results obtained show that the proposed strategy, compared with the former methods, reduce average power and power variation of batteries, and effectively utilize supercapacitors depending on the power demand, which can extend battery lifespan and lift the power performance of vehicle. [ABSTRACT FROM AUTHOR]

The energy management strategy (EMS) or power management strategy (PMS) unit is the core of power sharing control in the hybridization of automotive drivetrains in hybrid electric vehicles (HEVs). Once a new topology and its corresponding EMS are virtually designed, they require undertaking different stages of experimental verifications toward guaranteeing their real-world applicability. The present paper focuses on a new and less-extensively studied topology of such vehicles, HEVs equipped with an electrical variable transmission (EVT) and assessed the controllability validation through hardware-in-the-loop (HiL) implementations versus model-in-the-loop (MiL) simulations. To this end, first, the corresponding modeling of the vehicle components in the presence of optimized control strategies were performed to obtain the MiL simulation results. Subsequently, an innovative versatile HiL test bench including real prototyped components of the topology was introduced and the corresponding experimental implementations were performed. The results obtained from the MiL and HiL examinations were analyzed and statistically compared for a full input driving cycle. The verification results indicate robust and accurate actuation of the components using the applied EMSs under real-time test conditions. [ABSTRACT FROM AUTHOR]

A hybrid electric vehicle is powered by: the internal combustion engine and the battery-powered electric motor. These sources have specific operational characteristics, and it is necessary to match these characteristics for the efficient and smooth functioning of the vehicle. The nonlinearity and uncertainties in hybrid electric vehicle model require an intelligent controller to control the energy sharing between battery and engine. In this work, a fuzzy logic-enabled energy management strategy for the hybrid electric vehicle based on torque demand, battery state of charge and regenerative braking is designed and implemented. The proposed energy management strategy allows engine and motor to maneuver in their efficient operating regions. The designed hybrid electric vehicle and its control strategy follow the driver commands and regulations on vehicle performance and liquid fuel consumption. MATLAB/Simulink is used to carry out simulations, and then, the whole system is validated in real time on hardware-in-the-loop testing platform. This work employs an FPGA-based MicroLabBox hardware controller to validate real-time behavior. The proposed scheme results in better fuel economy, faster response and almost nil mismatch between desired and achieved vehicle speeds. [ABSTRACT FROM AUTHOR]

• Expert demonstration data of hybrid electric vehicle energy management are represented by domain adaptive meta-learning. • By embedding expert demonstration model, an apprenticeship-reinforcement learning framework is established to improve fuel economy. • It is verified under three hybrid vehicle models with different powertrain architectures and several driving cycles. • Compared to traditional reinforcement learning, the apprenticeship-reinforcement learning can effectively improve the fuel emergency and CO 2 emissions. Deep reinforcement learning (DRL) is a potential solution to develop efficient energy management strategies (EMS) for hybrid electric vehicles (HEV) that can adapt to the changing topology of electrified powertrains and the uncertainty of various driving scenarios. However, traditional DRL has many disadvantages, such as low efficiency and poor stability. This study proposes an apprenticeship-reinforcement learning (A-RL) framework based on expert demonstration (ED) model embedding to improve DRL. First, the demonstration data, calculated by dynamic programming (DP), were collected, and domain adaptive meta-learning (DAML) was used to train the ED model with the adaptive capability of working conditions. Then combined apprenticeship learning (AL) with DRL, and the ED model was used to guide the DRL to output action. The method was validated on three HEV models, and the results show that the training convergence rate increases significantly under the framework. The average increase that the apprenticeship-deep deterministic policy gradient (A-DDPG) based method applied to three HEVs achieved was 34.9 %. Apprenticeship-twin delayed twin delayed deep deterministic policy gradient (A-TD3) achieved 23 % acceleration in the power-split HEV. Because A-DDPG's EMS is more forward-looking and can mimic ED to some extent, the frequency of engine operation in the high-efficiency range has increased. Therefore, A-DDPG can improve the fuel economy of the series hybrid electric bus (HEB) by 0.2–2.7 %, and improvements averaged to about 9.6 % in the series–parallel HEV while maintaining the final SOC. This study aims to improve the sampling efficiency and optimal performance of EMS-based DRL and provide a basis for the design and development of vehicle energy saving and emission reduction. [ABSTRACT FROM AUTHOR]

—This paper proposes a real-time energy management strategy (EMS) for hybrid electric vehicles by incorporating reinforcement learning (RL) in a model predictive control (MPC) framework, which avoids the inherent drawbacks of RL—the excessive learning time and lack of adaptability—and remarkably enhances the real-time performance of MPC. First, the MPC framework for the energy management problem is formulated. In that, a novel long short-term memory (LSTM) neural network is utilized to construct the velocity predictor for a more accurate prediction, and its prediction capability is verified by a comparative analysis. Then, the HEV prediction model and the velocity predictor are regarded as the RL model with which the RL agent can interact. On this basis, the optimal control sequence in the prediction horizon can be learned through model-based RL, but only the first element is actually executed, and the RL process begins anew after the prediction horizon moves forward. In the simulation, the algorithm's convergence is analyzed and the influence of the prediction horizon length is evaluated. Then, the proposed EMS is compared with DP, conventional MPC, and RL method, the results of which demonstrate its performance and adaptability. As last, a hardware-in-the-loop test validates its actual applicability. • An energy management strategy is developed by incorporating RL in MPC framework. • The strategy avoids RL's inherent drawbacks and enhances MPC's real-time ability. • A long short-term memory neural network is utilized to predict the velocity. • Simulation and HIL test verify its fuel economy and real-time ability. [ABSTRACT FROM AUTHOR]

Energy management of Parallel Hybrid Electric Vehicles (PHEVs) involves computation of energy efficient torque-speed set-points for the engine and the motor. Application of Nonlinear Model Predictive Control (NMPC) for this problem has been reported in the recent literature. In this work, a fast iterative implementation of the NMPC, known as Model Predictive Static Programming (MPSP) is deployed for the first time for energy management of PHEVs, with an appropriate multi-objective cost function and the applicable equality and inequality constraints. Additionally, a systematic approach based on the Theory of Dominance is used to tune parameters of the controller efficiently. Performance is evaluated with a validated PHEV model on the ADVISOR simulation environment, in terms of various performance metrics on standard drive cycles. The results show that the performance of the MPSP-based technique is close to the ideal performance achieved with Dynamic Programming (DP) and improved over a standard implementation using the Linear Time-Varying MPC (LTV-MPC) and Sequential Quadratic Programming MPC (SQP-MPC) algorithm. Moreover, its execution time on an industry standard micro-controller board is seen to be significantly less than that of LTV-MPC and SQP-MPC. This algorithm therefore appears to be one of the best candidates for on-board vehicle implementation of an optimal energy management strategy for a PHEV. • A new improved energy management strategy for a Parallel HEV based on the MPSP framework. • Numerical implementation showing improved performance over a contemporary MPC algorithm. • Low execution time and feasibility of an on-board implementation. • A new effective approach for tuning the algorithm. [ABSTRACT FROM AUTHOR]

Hybrid vehicles are now more common in response to increasing global warming. The hybridization of energy sources and energy storage units enables improving the sustainability, reliability, and robustness of power systems. To reach the objective of zero emissions, a proton exchange membrane hydrogen fuel-cell was utilized as an energy source. The aim of this research was to create an accurate optimal sizing procedure for determining the nominal rating of the necessary sources. We modeled the fuel cell and the battery pack using data from real experimental results to create the generic database. Then, we added data on the mission profile, system constraints, and the minimization target function. The mission profile was then analyzed by the sizing algorithm to determine optional minimum and maximum fuel cell ratings. Analyzing the optional solutions using the vehicle real time energy management system controller resulted in a set of solutions for each available rated fuel cell, and the optimal compatible battery in the revealed band successfully accomplished the route of the driving cycle within the system limitations. Finally, the Pareto curve represented the optimal finding of the sizing procedure. Ultimately, in contrast to previous works that utilize gross manufacturer data in the sizing procedure, the main research contribution and novelty of this research is the very accurate sizing results, which draw on real experimental-based fuel-cell and battery sizing models. Moreover, the actual vehicle real time energy management system controllers were used in the sizing procedure. [ABSTRACT FROM AUTHOR]

Energy consumption in vehicle driving is greatly influenced by traffic scenarios, and the intelligent traffic system (ITS) has a key role in solving the real-time optimal control of hybrid vehicles. To this end, a new energy management control strategy based on vehicle-to-everything (V2X) communication for vehicle speed prediction was proposed to dynamically adjust the engine and motor power output according to the traffic conditions. This study is based on intelligent network connectivity technology to obtain forward traffic state data and use a deep learning algorithm to model vehicle speed prediction using the traffic state data. The energy economy function was modeled using the MATLAB/Sinumlink platform and validated with a plug-in hybrid vehicle model simulation. The results indicate that the proposed strategy improves the vehicle energy economy by 13.02% and reduces CO2 emissions by 16.04% under real vehicle driving conditions, compared with the conventional logic threshold-based control strategy. [ABSTRACT FROM AUTHOR]

The design of an energy management strategy is critical to improving the fuel efficiency of a vehicle system with an alternative powertrain system, such as hybrid electric vehicles or fuel cell electric vehicles. In particular, in fuel cell electric vehicles, the energy management strategy should consider system degradation and fuel savings because the hardware cost of the fuel cell system is much higher than that of a conventional powertrain system. In this paper, an easily implantable near-optimal energy management controller is proposed. The proposed controller distributes power generation between the fuel cell and the battery to simultaneously minimize system degradation and fuel usage. The controller is designed to consider the degradation cost and fuel cost in the framework of the equivalent consumption minimization strategy concept. The proposed controller was validated with a fuel cell electric vehicle model in MATLAB/Simulink (MathWorks, Natick, MA, USA). The proposed control strategy showed significant overall cost reduction compared to a thermostat control strategy and a conventional Equivalent Consumption Minimization Strategy (ECMS) strategy. [ABSTRACT FROM AUTHOR]

The most efficient energy management strategies for hybrid vehicles are the "Optimization-Based Strategies". These strategies require a preliminary knowledge of the driving cycle, which is not easy to predict. This paper aims to combine Worldwide Harmonized Light-Duty Vehicles Test Cycle (WLTC) low section short trips with real traffic levels for vehicle energy and fuel consumption prediction. Future research can focus on implementing a new strategy for Hybrid Electric Vehicle (HEV) energy optimization, taking into account WLTC and Google Maps traffic levels. First of all, eight characteristic parameters are extracted from real speed profiles, driven in urban road sections in the city of Messina at different traffic conditions, and WLTC short trips as well. The minimum distance algorithm is used to compare the parameters and assign the three traffic levels (heavy, average, and low traffic level) to the WLTC short trips. In this way, for each route assigned from Google maps, vehicle's energy and fuel consumption are estimated using WLTC short trips remodulated with distances and traffic levels. Moreover, a vehicle numerical model was implemented and used to test the accuracy of fuel consumption and energy prediction for the proposed methodology. The results are promising since the average of the percentage errors' absolute value between the experimental driving cycles and forecast ones is 3.89% for fuel consumption, increasing to 6.80% for energy. [ABSTRACT FROM AUTHOR]

This paper considers two commercial and residential buildings for building energy resilience against natural disasters that cause a power outage. The buildings are modeled with a shared parking station for their electric vehicles. The peer-to-peer operation is modeled for the buildings. The electric vehicles inside the parking station have dissimilar patterns of availability and such dissimilarity helps the buildings to be benefited from the vehicles for extra hours. The power outage is modeled at different day hours and with various durations. The building is supported by energy management options to handle such disruptions. The options are a peer-to-peer operation of the building, electrical vehicle charging-discharging, partial charge ability, load curtailment, and load adjustment. The proposed model only utilizes available components of the buildings and it does not need to install further components. The purpose is to minimize energy cost and maximize energy resilience under natural disasters. The resilience is defined as critical load restoration and minimum energy loss under various power outages. The results demonstrate that the designated energy management options can practically minimize energy cost and improve energy resilience following blackouts. The electric vehicles can reduce energy cost by about 25% and supply the loads under 7-h power outage. • Building energy resilience against the natural disasters is studied. • Buildings are modeled with shared parking station for their electric vehicles. • Electrical vehicles are modeled with partial charge capability. • Load curtailment and adjustment options are included. • Energy resilience is the critical load restoration and minimum energy loss. [ABSTRACT FROM AUTHOR]

Targeting the application of medium and heavy vehicles, a hydraulic electric hybrid vehicle (HEHV) was designed, and its energy management control strategy is discussed in this paper. Matlab/Simulink was applied to establish the pure electric vehicle and HEHV models, and backward simulation was adopted for the simulation, to get the variation of torque and battery state of charge (SOC) through New York City Cycle of the US Environmental Protection Agency (EPA NYCC). Based on the simulation, the energy management strategy was designed. In this research, the rule-based control strategy was implemented as the energy distribution management strategy first, and then the genetic algorithm was utilized to conduct global optimization strategy analysis. The results from the genetic algorithm were employed to modify the rule-based control strategy to improve the electricity economic performance of the vehicle. The simulation results show that the electricity economic performance of the designed hydraulic hybrid vehicle was improved by 36.51% compared to that of a pure electric vehicle. The performance of energy consumption after genetic algorithm optimization was improved by 43.65%. [ABSTRACT FROM AUTHOR]