Search

This study investigated converting abundant paper mill waste, de‐inked paper sludge (DPS), into value‐added medium‐density fiberboard (MDF) panels. The objective was to repurpose this solid waste into a valuable material that aligns with the principles of a circular economy. Previous research has examined the addition of paper sludge to wood composites, but there is limited information on the specific incorporation of DPS into MDF production. This investigation offers new insights into this application. MDF panels were manufactured using hardwood fibers, with varying levels of urea‐formaldehyde resin (10% and 12% by weight) and different loadings of DPS (ranging from 0% to 50% by weight). X‐ray diffraction analysis revealed the presence of defective DPS fiber crystals. Contact angle measurements confirmed that DPS had poor wettability, corresponding to increased water absorption. As more DPS was incorporated, the mechanical properties of the panels progressively weakened due to defective fibers and poor adhesion between the fibers and the matrix. This was evident in scanning electron microscopy micrographs, which showed an escalation in interfacial flaws. Increasing the resin dosage noticeably improved the internal bond strength and reduced moisture uptake across all levels of DPS. However, at a DPS loading of 50%, the properties of the panels deteriorated by 36%–57% compared to the control MDF. Additionally, thickness swelling and water absorption increased significantly with higher DPS content, primarily due to the hydrophilic nature of the fibers. Based on optimization, it was determined that a DPS loading of 20% with a resin content of 12% provided the best balance between performance, waste utilization, cost, and moisture resistance. The reuse of abundant paper sludge supports the goals of a circular economy. However, strategies are required to tailor the processing methods and enable higher levels of recycled material without excessively compromising the key attributes of the product. Further research should focus on enhancing the quality of DPS and its compatibility with wood fibers and resin to enhance the performance of the composite material. Highlights: DPS from recycled paper mill assessed for MDF production with wood fibers and resinIncreasing DPS loading caused reductions in strength and adhesion of panelsWater absorption and thickness swelling markedly rose with more DPS additionIt was attributed to hydrophilic fibers and disrupted fiber‐matrix bondingOptimal formulation was 20% DPS loading and 12% resin content, balancing performance, waste utilization, and cost. [ABSTRACT FROM AUTHOR]

Objectives: Endoscopic ultrasound‐guided tissue acquisition (EUS‐TA) is used for pathological diagnosis and obtaining samples for molecular testing, facilitating the initiation of targeted therapies in patients with pancreatic cancer. However, samples obtained via EUS‐TA are often insufficient, requiring more efforts to improve sampling adequacy for molecular testing. Therefore, this study investigated the use of oil blotting paper for formalin fixation of samples obtained via EUS‐TA. Methods: This prospective study enrolled 42 patients who underwent EUS‐TA for pancreatic cancer between September 2020 and February 2022 at the Osaka International Cancer Institute. After a portion of each sample obtained via EUS‐TA was separated for routine histological evaluation, the residual samples were divided into filter paper and oil blotting paper groups for analysis. Accordingly, filter paper and oil blotting paper were used for the formalin fixation process. The total tissue, nuclear, and cytoplasm areas of each sample were quantitatively evaluated using virtual slides, and the specimen volume and histological diagnosis of each sample were evaluated by an expert pathologist. Results: All cases were cytologically diagnosed as adenocarcinoma. The area ratios of the total tissue, nuclear, and cytoplasmic portions were significantly larger in the oil blotting paper group than in the filter paper group. The frequency of cases with large amount of tumor cells was significantly higher in the oil blotting paper group (33.3%) than in the filter paper group (11.9%) (p = 0.035). Conclusions: Oil blotting paper can increase the sample volume obtained via EUS‐TA on glass slides and improve sampling adequacy for molecular testing. [ABSTRACT FROM AUTHOR]

Aims: Information on breastfeeding and safety of biologics in infants is lacking due to difficulties in case collection. We evaluated methods for determining the concentration of biologics in breast milk using a dry filter method that can simplify the collection, storage and transport of breast milk. Methods: To generate dried filter paper (DFP) samples, approximately 30 μL of breast milk was placed onto a Whatman 903 card and punched out. After extraction, the supernatant was measured using an enzyme‐linked immunosorbent assay. Three concentrations of each drug were prepared in liquid breast milk (LBM) and DFP samples to determine their stability up to 28 days after storage at 2–8°C or −20°C for LBM and 25 ± 5°C for DFP. LBM and DFP samples were also provided by nursing mothers using biologics during lactation, and drug concentrations in both samples were compared. The agreement between the two measurement methods was confirmed by Bland–Altman analysis. Results: Breast milk was provided by 12 mothers who used biologics (tocilizumab, abatacept, etanercept, golimumab, sarilumab and belimumab). The coefficients of variation for within‐run and between‐run precision for the six drugs were within 15% for both LBM and DFP, and accuracy was within 90%–110% of the quality controls. After 28 days, concentrations remained at more than 90%. The difference between the values obtained by each method was within the acceptable range of error (−12.1 to +16.6 ng/mL). Conclusions: A method for determining the concentration of biologics using DFP is expected to help improve pharmacotherapy for lactating women. [ABSTRACT FROM AUTHOR]

Complex polymers represent a challenge for remediating environmental pollution and an opportunity for microbial‐catalysed conversion to generate valorized chemicals. Members of the genus Streptomyces are of interest because of their potential use in biotechnological applications. Their versatility makes them excellent sources of biocatalysts for environmentally responsible bioconversion, as they have a broad substrate range and are active over a wide range of pH and temperature. Most Streptomyces studies have focused on the isolation of strains, recombinant work and enzyme characterization for evaluating their potential for biotechnological application. This review discusses reports of Streptomyces‐based technologies for use in the textile and pulp‐milling industry and describes the challenges and recent advances aimed at achieving better biodegradation methods featuring these microbial catalysts. The principal points to be discussed are (1) Streptomyces' enzymes for use in dye decolorization and lignocellulosic biodegradation, (2) biotechnological processes for textile and pulp and paper waste treatment and (3) challenges and advances for textile and pulp and paper effluent treatment. [ABSTRACT FROM AUTHOR]

Carbon paper is commonly used for catalytic electrode preparation because of its high conductivity, corrosion resistance, and stability. However, traditional electrode preparation methods are inappropriate for highly hydrophobic carbon paper. In this paper, a high‐activity carbon paper catalytic electrode was prepared using multistrategies cold plasma modification to create atomic structural defects, dope N and Cu elements, and introduce oxygen‐containing functional groups. Analyses show that the bombardment of high‐energy particles caused atomic structural defects. Nitrogen and copper entered the carbon paper through plasma‐induced chemical recombination and physical adsorption, reaching 5.26% and 3.83%, respectively. Ethanol‐based plasma introduced oxygen‐containing functional groups to improve hydrophilicity. Finally, the plasma‐prepared electrode exhibited a reduction efficiency of 87.69% in an electrocatalytic nitrate reduction reaction. [ABSTRACT FROM AUTHOR]

Industrial waste locks are used as raw materials to reduce harmful effects on the environment and improve environmental performance. Marble clay powder can be used as a filling aid and can fill voids in concrete structures. This article will show you how to use a maximum natural sand alternative in concrete with marble powder and quarry dust. The challenge of the 21st century is to change to a new form that can support the natural system. This necessitates a radical rethinking of how to give the community infrastructure and housing. Making a concerted effort to develop novel, innovative, and alternative construction materials may be necessary. Jungles of concrete around cause's impact on the Environment and it would result in climate change. Mankind must avoid the use of things that are detrimental to the environment. So in this paper, it is decided to address the issue by adopting the use of the green concrete concept which is environmentally friendly. Green concrete is concrete made up using industrial wastes such as marble powder, quarry dust, wood ash, paper pulp, etc. Green concrete, which is capable of sustainable development, helps to reduce the consumption of natural resources, energy use, and environmental pollution. Green concrete is more cost‐effective than ordinary concrete and reduces the cost of resultant concrete by 14%–20%. It is also observed that the alkali‐aggregate reaction and sulfate attack resistance of concrete are both significantly improved. Green concrete is a useful tool for lowering environmental pollution and enhancing concrete's resistance to harsh conditions. All stages of infrastructure construction and rehabilitation will follow this trend of using new cement and techniques. Green concrete's adaptability and its performance derivatives will meet a variety of future needs. [ABSTRACT FROM AUTHOR]

Composites are pivotal in Europe's evolving packaging sector, which is undergoing changes due to circular and bioeconomy initiatives, which prioritize eco‐friendly packaging. Despite paper's high recycling rates, dynamic markets challenge recycling and circularity. Innovative paper‐based composites demand flexible recyclability assessments, which impacts product development. Recyclability methods are evolving as they struggle to match the dynamic changes occurring in the packaging sector. This article outlines paper recycling and compares global lab recyclability evaluation methods. [ABSTRACT FROM AUTHOR]

Flexible graphene‐based paper electrodes (FGPEs) are a new class of study and the research on this electrode material has been carried out for approximately ten years. FGPEs have many advantages compared to classical solid electrodes such as being flexible, foldable, adaptable to flexible electronics, being cut, easily shaped, and effective and adjustable modification. In this work, the applicability of FGPEs modified with polyindole (PIN) thin films and zinc oxide nanoparticles (ZnO‐NPs) to energy‐storage systems as a supercapattery design is presented, and especially the limitations of ZnO‐NPs for energy‐storage applications are revealed to inform researchers working for a similar purpose. Capacitance calculations have been performed using both cyclic voltammetry (CV) and galvanostatic charge‐discharge (GCD) experiments. It was observed that the rGO/PIN paper demonstrated almost 30 times more energy‐storage capacity than that of the rGO/PIN/ZnO paper due to the electrochemical instability of ZnO‐NPs on the flexible electrode platform at the applied potential region in 1.0 M HClO4 solution. The rGO/PIN paper with a highly flexible property exhibited an energy density of 74.5 W h cm−2 and a power density of 2258 W cm−2 at a current density of 2.2 mA cm−2, revealing hopeful results for future modular and flexible approaches. [ABSTRACT FROM AUTHOR]

Direct air capture (DAC) is a sustainable technology to alleviate the greenhouse effect and a reliable pathway to acquire inexhaustible CO2 for the production of costly chemicals and energy products. Current DAC technologies with amine‐related sorbents rely on chemisorption, while they consume intensive energy for CO2 release and sorbent regeneration by heating. Developing new DAC processes with weak, reversible adsorption can substantially reduce the regeneration energies. Herein, the design of CO2 breathing paper (CBP) is demonstrated toward spontaneous CO2 extraction from ambient air and solar‐driven regeneration. The CBP is fabricated by coupling 2‐ethyl‐4‐methylimidazole to carbon nanotube paper on the basis of density functional theory calculations. At ambient conditions, CBP spontaneously captures atmospheric CO2 with a capacity of 0.14–1.75 mmol g–1 at 0–35 °C through non‐covalent electrostatic interaction. Upon exposure to sunlight, all adsorbed CO2 can be released and converted to concentrated gas for storage. Attractively, the efficiency of solar‐driven CO2 release is much higher than the traditional temperature‐swing method owing to the IR sensitivity of CO2. Besides the reversibility, the mild conditions also ensure the durability of CBP. These findings suggest that the CBP is a promising candidate for cost‐effective DAC. [ABSTRACT FROM AUTHOR]

To compare the urine Congo‐red dot paper test (CRD) with dipstick urinalysis to screen preeclampsia (PE). A total of 409 paired spot urine samples were obtained prospectively from women with suspected pre‐eclampsia attending for routine hospital visits. Congo‐red dot paper test and dipstick urinalysis were examined and compared to screen pre‐eclampsia. The agreement between the two urinary test is modest (kappa coefficient = 0.28, 95% CI 0.14–0.42). The specificity of CRD was higher than urinalysis (97.4% vs. 90.4%, p <.001). Urinalysis performed better in sensitivity (77.3% vs. 40.9%, p =.04) and the area under the receiver operating characteristic curves (AUC) (0.84 [95% CI 0.74–0.94] vs. 0.69 [95% CI 0.55–0.83], p =.04) than CRD, respectively. The sensitivity, specificity, AUC of the parallel test of them is 86.4% (64.0%–96.4%), 89.1% (85.5%–92.0%), and 0.88 (95% CI 0.79–0.96). And the serial test is 31.8% (14.7%–54.9%), 98.7% (96.8%–99.5%), 0.65 (95% CI 0.51–0.79), accordingly. The urinalysis is a better diagnosing test for preeclampsia. CRD could aid in the diagnosis of patients with preeclampsia. Combined the two tests in suspected patients may further improve the performance in the diagnosis of preeclampsia. Further study need to be made for its potential clinical practice. [ABSTRACT FROM AUTHOR]

Objective: To determine the accuracy of high‐risk human papillomavirus (HPV) DNA samples on filter paper in comparison to specimen transport medium (STM). Methods: This was a cross‐sectional diagnostic study of 42 consecutive women who were prospectively recruited. Each had self‐collected vaginal samples on filter paper, physician‐collected cervical samples on filter paper, and physician‐collected cervical samples in STM. HPV DNA testing was performed with a Hybrid Capture 2 system (Qiagen). Sensitivity, specificity, negative predictive value (NPV), positive predictive value (PPV), and agreement of filter paper methods with the standard procedure were calculated. Results: The overall prevalence of HPV in STM was 67.5%. Detection of HPV DNA in the physician‐collected cervical samples on filter paper had a sensitivity of 77.8%, a specificity of 100%, a PPV of 100%, and an NPV of 68.4%. The patient's self‐sampling on filter paper had a sensitivity of 66.7%, a specificity of 100%, a PPV of 100%, and an NPV of 59.1%. The agreement between STM method and physician‐collected sample on filter paper was substantial, (κ = 0.695, P < 0.001), while the agreement between STM and self‐collected samples on filter paper was moderate (κ = 0.565, P < 0.001). Most patients reported that self‐collection was acceptable (100%), painless (95%), and not embarrassing (95%). Conclusion: Filter paper, with dried self‐collected vaginal samples, can be used to detect high‐risk HPV with acceptable accuracy. Synopsis: Self‐collected vaginal samples on filter paper, to detect high‐risk human papillomavirus, is better for women, easier to transport to central laboratories, and has acceptable accuracy. [ABSTRACT FROM AUTHOR]

This study attempts to detect papers originating from the Russia‐based paper mill 'International Publisher' LLC. A total of 1,063 offers to purchase co‐authorship on a fraudulent papers published from 2019 to mid‐2022 on the 123mi.ru website were analysed. This study identifies at least 451 papers that are potentially linked to the paper mill, including one preprint, a duplication paper and 16 republications of papers erroneously published in hijacked journals. Evidence of suspicious provenance from the paper mill is provided: matches in title, number of co‐authorship slots, year of publication, country of the journal, country of a co‐authors and similarities of abstracts. These problematic papers are co‐authored by scholars from at least 39 countries and are submitted to both predatory and reputable journals. This study also demonstrates collaboration anomalies in questionable papers and examines indicators of the Russia‐based paper mill. The value of co‐authorship slots offered by 'International Publisher' LLC from 2019 to 2021 is estimated at $6.5 million. Since this study only analysed a single paper mill, it is likely that the number of papers with forged authorship is much higher. [ABSTRACT FROM AUTHOR]

The acidic soils of western Newfoundland require liming for successful production of most crops. Locally sourced paper mill waste wood ash (WA) and paper sludge (SL) have potential as cheaper alternatives to limestone (LIME). Two greenhouse experiments evaluated WA and SL as liming and soil conditioning amendments for annual ryegrass (Lolium multiflorum) production. At 55 days after seeding, soil pH in WA (6.2 and 6.3) and wood ash and paper sludge (WASL) (6.0 and 6.3) were not different from that in LIME (6.0 and 6.5) for Experiments 1 and 2, respectively. However, pH in SL was 0.4 and 0.3 points lower than in LIME. Compared to LIME, WA, SL, and WASL produced 31%–52% and 57%–74% greater biomass yield in Experiments 1 and 2, respectively. N uptake was greater in WA (60 and 129 kg N ha−1) and WASL (51 and 97 kg N ha−1) compared to LIME (40 and 85 kg N ha−1), in Experiments 1 and 2, respectively. SL did not differ from LIME in Experiment 1, but reduced N uptake by 57% in Experiment 2. The results show significant potential of WA as an alternative amendment for liming and yield improvement of annual ryegrass grown in NL podzolic soils. However, SL has limited potential due to the risk of increasing N immobilization and residual soil mineral N when growing conditions are limiting. Combining SL with WA or biochar seemed to alleviate these risks. Overall, the adoption of these amendments for field production systems warrants serious consideration, following supplemental field studies to determine optimal application rates and timing. Core Ideas: The podzolic soils of Newfoundland have low pH and fertility, hence require liming.Locally sourced wastes, such as paper mill wood ash (WA) and sludge (SL), could be used as liming and nutrient sources.WA was equivalent to limestone (LIME) in improving and sustaining optimal soil pH.WA produced 52% and 74% greater annual ryegrass yield than conventional LIME application in podzolic soils. [ABSTRACT FROM AUTHOR]

Atmospheric pressure plasma polymerization represents a promising coating technology, addressing drawbacks of traditional processes (solvent use, multistep procedures, etc.) while enabling deposition of thin cross‐linked polymer layers with high contour fidelity. We address technological challenges with a novel plasma device that integrates multiple plasma source benefits and investigate the suitability of two plant‐based precursors, chia and tung oil, for plasma polymerization to hydrophobize glass and paper. Chia oil enables the deposition of thin, covalently bonded hydrophobic polymer layers. Such coatings have diverse applications especially inside the paper industry, where water repellents in the form of internal and surface sizing have always been an essential functionalization step. Using bio‐based precursors and reducing extra chemicals contributes to substituting fossil‐based or harmful substances. [ABSTRACT FROM AUTHOR]

One of the tasks required of most statistics researchers and academic faculty is to publish their innovative ideas in the peer‐reviewed literature. In this paper, we provide guidance about the different stages of the process as experienced authors and offer advice from those who hold the decision about the success or failure of these papers, namely the editors of applied statistics journals. The paper is organized into four sections focusing on the different stages of publishing: (1) Planning what to write about, where to submit and how to organize the paper; (2) The process of writing the paper; (3) Interpreting and responding to peer‐reviews from the journal editors and referees to prepare for resubmission; and (4) General comments about the publication process, including collaboration and mentoring. Each section starts with fundamentals provided by the moderators (C.A.C. and L.L.) on key aspects to consider on each topic and then is followed with discussion from some current and past editors of impactful journals in the field of applied statistics. Our hope is that this collection of insights may help accelerate learning about the process for young researchers and help all researchers to understand some of the important often‐unspoken aspects of the process. [ABSTRACT FROM AUTHOR]

Paper manufacturers have long used silicone as the coating agent for release liners. However, silicone‐based release paper is very difficult to recycle due to covalent bonds between silicone and fibers. The most suitable solution to overcome this problem is to use alternative coating materials with adequate release properties, provided that they can be easily repulped in typical paper recycling facilities. We proposed a coating agent composed of phosphate esters and dimethylacetamide in order to manufacture a recyclable and efficient release paper. Analyses carried out on coated sheets showed that phosphate esters allowed the formation of a surface with adequate release properties (low peeling force and surface free energy). In addition, the residual adhesion values obtained with phosphate esters confirmed that they are well anchored on the backing paper surface, thus limiting the mass transfer to the adhesive tape. [ABSTRACT FROM AUTHOR]

We developed a simple, paper‐based device that enables sensitive detection by mass spectrometry (MS) without solid phase extraction or other sample preparation. Using glass fiber filter papers within a 3D printed holder, the device employs electrokinetic manipulations to stack, separate, and desalt charged molecules on paper prior to spray into the MS. Due to counter‐balanced electroosmotic flow and electrophoresis, charged analytes stack on the paper and desalting occurs in minutes. One end of the paper strip was cut into a sharp point and positioned near the inlet of a MS. The stacked analyte bands move toward the paper tip with the EOF where they are ionized by paper spray. The device was applied to analysis of PFAS in tap water with sub part‐per‐trillion detection limits in less than ten minutes with no sample pretreatment. Analysis of opioids in urine also occurs in minutes. The crucial parameters to enable stacking, separation, and MS ionization of both positively and negatively charged analytes were determined and optimized. Experimental and computational modeling studies confirm the electrokinetic stacking and analyte transport mechanisms. On‐paper separations were carried out by stacking analyte bands at different locations depending on their electrophoretic mobility, achieving baseline separation in some cases. [ABSTRACT FROM AUTHOR]

Information coding, recording, encryption, and decryption are of great importance in the field of anti‐counterfeiting, especially in the current AI information era. Herein, a paper‐like hydrogel composed of solely H‐bonded poly(vinyl alcohol) (PVA) and poly(n‐vinylcaprolactam) (PNVCL), namely VAPN, is developed for multiple ways of encryption and decryption based on chemical‐induced phase separation. It not only exhibits excellent ability of ink absorption and retention by the noncovalent H‐bonds and n−π* interactions and good mechanical strength but also maintains a negligible volume change during the phase separation that is crucial for the information fidelity. Given that the noncovalent interactions are the driving force to trigger the phase separation in the hydrogel, available chemical inks are numerous ranging from small molecules to polymers. Furthermore, together with thermally induced phase separation, the different dynamic processes of the association and dissociation between ink molecules and the hydrogel endow the latter with reversible information recording and self‐erasing, temporary or permanent, and customized encryption and decryption. [ABSTRACT FROM AUTHOR]

Paper‐based cultural relics are of great value and have been facing irreversible damage caused by multiple factors, among which acid hydrolysis and ultraviolet photodegradation are the main processes leading to paper deterioration. Paper protection highly relies on a limited range of materials with single functions, and the design of new materials that ensure long‐term safety and efficiency by simultaneously addressing the issues of acidification and UV degradation in paper is highly desired. In this study, the introduction of carbon dots (CDs)‐enhanced layered double hydroxides (LDH) 0D/2D nanohybrids (CDs/Mg‐Al LDH)  is proposed as novel dual‐functional materials for paper protection against UV degradation and acidification. Through a CDs‐assisted in situ growth strategy, CDs/Mg‐Al LDH with ultrathin thickness (≈9.1 nm) and CDs‐intercalated structure are achieved. The CDs/Mg‐Al LDH nanohybrids demonstrate high dispersibility, strong UV absorption, and remarkable photostability, resulting in protected‐paper with decelerated acidification, oxidation, and yellowing degradation processes under both accelerated UV‐aging and dry‐heat conditions. Additionally, the protected‐paper can emit uniform blue light under 365 nm UV excitation allows for easy identification of the distributed CDs/Mg‐Al LDH within the paper, marking a unique and practical feature. This research paces a new direction for the protection of paper‐based relics with emerging carbon dots‐based 0D/2D nanomaterials. [ABSTRACT FROM AUTHOR]

Turmeric and ginger are extensively employed as functional ingredients due to their high content of curcuminoids and gingerols, considered the key bioactive compounds found in these roots. In this study, we present an innovative and fast method for the assay of curcuminoids and gingerols in different foods containing the two spices, with the aim of monitoring the quality of products from a nutraceutical perspective. The proposed approach is based on paper spray tandem mass spectrometry coupled with the use of a labeled internal standard, which has permitted to achieve the best results in terms of specificity and accuracy. All the calculated analytical parameters were satisfactory; accuracy values are around 100% for all spiked samples and the precision data result lower than 15%. The protocol was applied to several real samples, and to demonstrate its robustness and reliability, the results were compared to those arising from the common liquid chromatographic method. [ABSTRACT FROM AUTHOR]

Background: Taking notes during learning has benefits both during class (through writing things down to encode information) and after class (by using written notes as external storage for revision). Comparisons of note‐taking methods (i.e., using paper or a computer) have mainly shown that paper leads to better learning. However, previous studies have mostly been conducted in laboratory contexts. Aims: The current study investigates university students' perceptions of the efficacity of their own preferred note‐taking method, along with the strategies they employ. Sample: Data were collected from 108 university students. Methods: Students answered a questionnaire about their note‐taking strategies during initial note‐taking (in class) and revision (after class). Results: The results show that students who take notes on paper do not consider their method to be more effective, but they report engaging in more reformulation and less multitasking. Students who take notes on a computer are more likely to reformat their notes, and thus to reformulate at a later stage. For all students, review sheets are mostly done on paper. Conclusions: These results suggest that although students are not necessarily aware of the benefits of reformulation associated with handwriting on paper during initial note‐taking, when revising, they tend to choose handwriting and benefit from reformulation when aiming for deeper processing. Therefore, revision activities remain mainly paper‐based. [ABSTRACT FROM AUTHOR]

Since the introduction of OpenAI's ChatGPT‐3 in late 2022, conversational chatbots have gained significant popularity. These chatbots are designed to offer a user‐friendly interface for individuals to engage with technology using natural language in their daily interactions. However, these interactions raise user privacy concerns due to the data shared and the potential for misuse in these conversational information exchanges. Furthermore, there are no overarching laws and regulations governing such conversational interfaces in the United States. Thus, there is a need to investigate the user privacy concerns. To understand these concerns in the existing literature, this paper presents a literature review and analysis of 38 papers out of 894 retrieved papers that focus on user privacy concerns arising from interactions with text‐based conversational chatbots through the lens of social informatics. The review indicates that the primary user privacy concern that has consistently been addressed is self‐disclosure. This review contributes to the broader understanding of privacy concerns regarding chatbots the need for further exploration in this domain. As these chatbots continue to evolve, this paper acts as a foundation for future research endeavors and informs potential regulatory frameworks to safeguard user privacy in an increasingly digitized world. [ABSTRACT FROM AUTHOR]

This document provides abstracts of papers presented at the Society of Dairy Technology 80th Anniversary Conference, covering a range of topics in the dairy industry. One paper examines the impact of process conditions on water evaporation and energy usage in spray drying, while another explores the use of near-infrared spectroscopy to analyze the composition of raw milk. Other papers discuss the development of high-protein soft cheese alternatives, plant-based cheese analogues, and sustainable cleaning strategies in dairy facilities. The document also mentions a project focused on characterizing the milk metabolome and developing biomarkers for milk processability and methane production. Additionally, the document highlights a study that modified sediment quantification tests for dairy powders to improve image analysis capabilities, with promising results. Further research is planned to investigate the effects of robotic agitation and test additional powders. [Extracted from the article]

The Asian paper wasp (Polistes chinensis) is an invasive species in New Zealand and a voracious arthropod predator, incorporating a wide range of prey into its diet. We examined the colony survival and prey community composition of these wasps in a protected coastal habitat in New Zealand. Paper wasp colonies at this site were surveyed and monitored weekly over two summers. Our data showed that only ~20% of the monitored colonies each year survived until late summer, with high rates of colony mortality in late spring and early summer. We collected samples of wasp larval guts over a temporal gradient in one nesting season, and via DNA metabarcoding analysis, we identified the prey species consumed. The prey species most frequently identified in larval samples were endemic cicadas and several lepidopteran species. No native arthropod species of known conservation concern were identified in the analysis. However, 63% of the unique taxon sequences retrieved could not be identified by genus or species level, likely due to the absence of reference barcodes. These taxa may represent a group of understudied species, potentially highly endemic or localised. Our analysis indicates that these invasive wasps are opportunistic‐generalist predators with the potential to exert high predation pressure on native arthropods. P. chinensis may be preying on a range of understudied species, especially in remote, natural habitats across New Zealand. We recommend future studies continue to barcode native New Zealand arthropods in order to improve the taxonomic assignments of dietary studies. [ABSTRACT FROM AUTHOR]

Background Methods Results Conclusions Shared reading is an important opportunity for parents and children to connect and learn, which can support later independent reading skills. Much of the research to date has examined shared reading as parents read physical print books with their children. This research has demonstrated that parents tend to engage in more activities that emphasise the meaning of the stories over the code (i.e., print). Here, we examine the focus of shared reading when parents are reading with their children on paper versus on a digital device and whether this differs across the preschool years.A total of 253 parents of children aged 0–5 years completed an online self‐report questionnaire. Parents reported on the frequency of engaging in meaning‐ versus code‐related activities during shared book reading on paper and on screen with their youngest child. We conducted a linear regression analysis contrasting code‐ versus meaning‐related activities on paper versus screen modality with age as a continuous variable.Key to our objectives, parents reported engaging in meaning‐related activities more frequently during shared reading on paper versus on screens and in code‐related activities more frequently during shared reading on screens than on paper. These effects did not differ across age, although overall, parents reported engaging slightly more frequently in shared reading activities in general when their child was older.The findings show that parents are engaging with their children differently as they read together on paper versus screens. Consistent with prior research, we found that activities emphasising the meaning of stories dominate shared paper book reading experiences in the preschool years. Critically shared reading on screens tips this balance, with parents reporting more code‐related activities. These patterns identify the learning opportunities enabled by the affordances of shared reading on screens. [ABSTRACT FROM AUTHOR]

This work demonstrates our effort to develop stimuli responsive cellulose films for the detection of dimethyl amines, a biogenic amine, released during food decomposition. Herein, we demonstrate that thin layer deposition of polydiacetylene‐zinc oxide nanosheets (PDA‐ZnO) on cellulose (CE) paper yields a stimuli responsive strip exhibiting strong thermochromism and solvatochromism against dimethyl amine. The incorporation of Zn nanoclusters within the composite plays an essential role in achieving reversible thermochromism while strong intermolecular interactions promote adsorption of PDA‐ZnO on cellulose paper. X‐ray diffraction and infrared spectroscopy reveal that the Zn2+ ions intercalate with PDA bilayer and strongly interact with the carboxylate headgroup of PDA. Furthermore, the reversible thermochromism persist when the nanosheets are deposited on cellulose (CE) paper when assembling PDA‐ZnO−CE paper. In addition, PDA‐ZnO−CE displayed selective solvatochromism allowing the utilization of the paper in the detection of dimethyl amine as it displayed a distinct and remarkable purple to orange colour transition. In particular, the response of the PDA‐ZnO−CE paper in several other organic solvents was poor as no transitions were observed hence its selectivity towards dimethylamine. In conclusion, the incorporation of PDA‐ZnO on cellulose paper is a step forward towards designing of a stimuli responsive packaging material that can detect biogenic amines released during food decomposition thereby preventing food poisoning. [ABSTRACT FROM AUTHOR]

That there is a "crisis of peer review" at the moment is not in dispute, but sufficient attention has not yet been paid to the normative potential that lies in current calls for reform. In contrast to approaches to "fixing" the problems in peer review, which tend to maintain the status quo in terms of professionalising opportunities, this paper addresses the needs of philosophers and how peer‐review reform can be an opportunity to improve the academic discipline of philosophy, whereby progress is understood as making the discipline more fair to the global academic community and more conducive to the flourishing of academic philosophers. The paper evaluates recent categories of relevant norms and correlating reforms. In conclusion, it recommends that philosophy pursue the norms of transparency and democracy explicitly when proposing peer‐review reform and suggest that proposals for forum‐based models of peer review are most likely to support those norms. [ABSTRACT FROM AUTHOR]

Avoiding financial losses requires preventing catastrophic oil‐filled power transformer breakdowns. Continuous online transformer monitoring is needed. The authors use paper insulation to evaluate transformer health for continuous online transformer monitoring. The study suggests a new artificial intelligence method for estimating paper insulation residual life in oil‐immersed power transformers. The four artificial intelligence models use backpropagation‐based neural networks to predict paper insulation lifespan. Four primary transformer insulating paper failure indices—degree of polymerisation, 2‐furfuraldehyde, carbon monoxide, and carbon dioxide—form the basis of these models. Each model, including the backpropagation‐based neural networks, estimates paper insulation life using one failure index, along with moisture and temperature data. Optimisation techniques enhance hidden layer neurons and epoch count for improved performance. Results are validated against literature‐based life models, establishing a precise input–output correlation. This method accurately predicts the remaining useable life of power transformer paper insulation, enabling utilities to take proactive measures for safe and efficient transformer operation. [ABSTRACT FROM AUTHOR]

This paper analyses the conference papers published by double first‐class universities from mainland China between 2006 and 2019. The main findings are as follows: first, the number of conference papers from different double first‐class universities varied greatly, with the annual numbers of papers in the China Proceedings of Conferences Full‐text Database (CPCD) and in the Conference Proceedings Citation Index (CPCI) fluctuating during this period. Second, most of the top 10 disciplines of the papers in the CPCD and CPCI were in the natural sciences, with only two in the social sciences. The CPCD papers and CPCI papers had some overlap in their disciplinary distributions. Third, the CPCD and CPCI papers differed little in total number, with the number of CPCI papers being slightly higher than the number of CPCD papers. With the introduction of new regulations from the Ministry of Science and Technology (MST), there will likely be an increase in the number of Chinese‐language conference papers in the future. [ABSTRACT FROM AUTHOR]

Electronic paper (e‐paper) is a reflective display technology with unique advantages, such as bistability, low‐power consumption, and high ambient contrast ratio. These features make e‐paper a promising candidate for future Internet of Things applications. Among different technologies of e‐paper, electrophoretic display (EPD) is the most successful one for commercialization. However, the edge ghosting (also known as the fringing effect) still limits the performance of EPD. Herein, we established a model of particle dynamics of electrophoresis, simulated the edge ghosting of microcapsule EPD, analyzed the edge ghosting effect, and revealed the relationship between thicknesses, dielectric constants of the back binder layer, and the edge ghosting. Two EPD panels with different thicknesses of back binder layer were demonstrated, which verifies the accuracy of this simulation model. With the proposed model, many device mechanisms and product issues can be analyzed and illustrated, which is supposed to guide the researchers in optimizing the device structure design of EPD. [ABSTRACT FROM AUTHOR]

Key points: Academia is already witnessing the abuse of authorship in papers with text generated by large language models (LLMs) such as ChatGPT.LLM‐generated text is testing the limits of publishing ethics as we traditionally know it.We alert the community to imminent risks of LLM technologies, like ChatGPT, for amplifying the predatory publishing 'industry'.The abuse of ChatGPT for the paper mill industry cannot be over‐emphasized.Detection of LLM‐generated text is the responsibility of editors and journals/publishers. [ABSTRACT FROM AUTHOR]

Despite the growing interest in incorporating response time data into item response models, there has been a lack of research investigating how the effect of speed on the probability of a correct response varies across different groups (e.g., experimental conditions) for various items (i.e., differential response time item analysis). Furthermore, previous research has shown a complex relationship between response time and accuracy, necessitating a functional analysis to understand the patterns that manifest from this relationship. In this study, response time data are incorporated into an item response model for two purposes: (a) to examine how individuals' speed within an experimental condition affects their response accuracy on an item, and (b) to detect the differences in individuals' speed between conditions in the presence of within‐condition effects. For these two purposes, by‐variable smooth functions are employed to model differential and functional response time effects by experimental condition for each item. This model is illustrated using an empirical data set to describe the effect of individuals' speed on their reading comprehension ability in two experimental conditions of reading medium (paper vs. digital) by item. A simulation study showed that the recovery of parameters and by‐variable smooth functions of response time was satisfactory, and that the type I error rate and power of the test for the by‐variable smooth function of response time were acceptable in conditions similar to the empirical data set. In addition, the proposed method correctly identified the range of response time where between‐condition differences in the effect of response time on the probability of a correct response were accurate. [ABSTRACT FROM AUTHOR]

Epidemiological studies have explored the relationship between allergic diseases and cancer risk or prognosis in AllergoOncology. Some studies suggest an inverse association, but uncertainties remain, including in IgE‐mediated diseases and glioma. Allergic disease stems from a Th2‐biased immune response to allergens in predisposed atopic individuals. Allergic disorders vary in phenotype, genotype and endotype, affecting their pathophysiology. Beyond clinical manifestation and commonly used clinical markers, there is ongoing research to identify novel biomarkers for allergy diagnosis, monitoring, severity assessment and treatment. Gliomas, the most common and diverse brain tumours, have in parallel undergone changes in classification over time, with specific molecular biomarkers defining glioma subtypes. Gliomas exhibit a complex tumour‐immune interphase and distinct immune microenvironment features. Immunotherapy and targeted therapy hold promise for primary brain tumour treatment, but require more specific and effective approaches. Animal studies indicate allergic airway inflammation may delay glioma progression. This collaborative European Academy of Allergy and Clinical Immunology (EAACI) and European Association of Neuro‐Oncology (EANO) Position Paper summarizes recent advances and emerging biomarkers for refined allergy and adult‐type diffuse glioma classification to inform future epidemiological and clinical studies. Future research is needed to enhance our understanding of immune–glioma interactions to ultimately improve patient prognosis and survival. [ABSTRACT FROM AUTHOR]

Microfluidic Paper‐based Analytical Devices (µPADs) have emerged as a new class of microfluidic systems, offering numerous advantages over traditional microfluidic chips. These advantages include simplicity, cost‐effectiveness, stability, storability, disposability, and portability. As a result, various designs for different types of assays are developed and investigated. In recent years, µPADs are combined with conventional detection methods to enable rapid on‐site detection, providing results comparable to expensive and sophisticated large‐scale testing methods that require more time and skilled personnel. The application of µPAD techniques is extensive in environmental quality control/analysis, clinical diagnosis, and food safety testing, paving the way for on‐site real‐time diagnosis as a promising future development. This review focuses on the recent research advancements in the design, fabrication, material selection, and detection methods of µPADs. It provides a comprehensive understanding of their principles of operation, applications, and future development prospects. [ABSTRACT FROM AUTHOR]

In this work, stacked SiC fibers paper‐reinforced SiC ceramic matrix composites (SiCnf/SiC CMCs) were prepared by nanoimpregnation and transient eutectic (NITE) process using ultra‐long single‐crystal SiC nanofibers. The effect of the SiCnf surface modification via boron nitride (BN) interphase deposition as well as the sintering additive (Al2O3–Y2O3) content on the density, microstructure, and mechanical properties of SiCnf/SiC CMCs has been investigated systematically. The results revealed that the laminated SiCnf/SiC CMCs feature a significant saw‐tooth‐like curve on the load–displacement test, which indicates that the obtained laminated structure with the weak interlayer binding owning to the BN coating treatment possesses significant toughening to the SiC ceramics. Specifically, the SiCnf/SiC CMCs with the sintering additive content of 12 wt% revealed a fracture toughness of over 10 MPa m1/2 after 60 min of BN interface deposition, which is 104.31% higher than that of the composites prepared without BN coating. [ABSTRACT FROM AUTHOR]

Chronic pruritus (CP) is frequent in general medicine and the most common complaint in general dermatology. The prevalence of CP is expected to rise in the future due to the ageing population. The clinical presentation, underlying aetiology and treatment strategy of CP are heterogeneous. Also, individual treatment aims and physical, psychic and economic burdens of patients might vary. Chronic prurigo (CPG) is the most severe disease in the chronic pruritus spectrum, being associated with long‐standing scratch‐induced skin lesions and a therapy refractory itch‐scratch‐cycle. It is thus important to raise disease awareness for CP and CPG in the general public and among decision‐makers in the health system. Further, there is a need to support a rational clinical framework to optimize both diagnostics and therapeutics. Currently, there is still a shortcoming regarding approved therapies and understanding CP/CPG as severe medical conditions. Therefore, the EADV Task Force Pruritus decided to publish this white paper based on several consensus meetings. The group consented on the following goals: (a) ensure that CP is recognized as a serious condition, (b) increase public awareness and understanding of CP and CPG as chronic and burdensome diseases that can greatly affect a person's quality of life, (c) clarify that in most cases CP and CPG are non‐communicable and not caused by a psychiatric disease, (d) improve the support and treatment given to patients with CP to help them manage their disease and (e) publicize existing therapies including current guidelines. We aim to point to necessary improvements in access and quality of care directed to decision‐makers in health policy, among payers and administrations as well as in practical care. [ABSTRACT FROM AUTHOR]

Genetic testing, including whole genome, whole exome, and other next‐generation sequencing technologies, has evolved vastly in the past decade. With this, the number of identified genes and genetic variants is constantly increasing. Although a variety of databases and online tools exist that summarize, categorize, and classify genes, a clear guideline of which information is needed when reporting a gene and what to do when identifying a new gene is lacking. This includes the correct nomenclature, descriptive information about genetic loci and genetic variation, aliases, and correlated phenotypes. This tutorial is meant to serve as an introduction to reporting genes in a paper and provides an overview of available databases and tools to obtain all necessary information on the genes of interest. [ABSTRACT FROM AUTHOR]

Power outages can cause harm to both society and individual health. Among the crucial elements of power systems, power transformers play a vital role, and their failures can lead to incidents and disruptions. According to statistics, almost 50% of the explosions and fires in the power transformer are caused by oil‐impregnated paper (OIP) bushing failures. Moreover, moisture is a crucial factor that affects the health of OIP bushings, and assessing the moisture level in OIP bushings is vital to guarantee the safety of power systems. While the frequency‐domain dielectric spectroscopy (FDS) method has been widely used to assess the moisture content of OIP bushings on‐site, it has the disadvantage of requiring a long measurement time. Therefore, a novel technique was proposed in this study that involves measuring the OIP bushing dissipation factor (tanδ) at 1 Hz to estimate the moisture content in a significantly shorter time. Five samples of OIP with various moisture levels have been selected, and an equation based on the OIPs' value of tanδ at 1 Hz was proposed to assess the moisture level of OIP bushings. Furthermore, the validity of the proposed method was successfully verified, proving its precision and time efficiency. [ABSTRACT FROM AUTHOR]

The accumulation of senescent cells drives inflammaging and increases morbidity of chronic inflammatory lung diseases. Immune responses are built upon dynamic changes in cell metabolism that supply energy and substrates for cell proliferation, differentiation, and activation. Metabolic changes imposed by environmental stress and inflammation on immune cells and tissue microenvironment are thus chiefly involved in the pathophysiology of allergic and other immune‐driven diseases. Altered cell metabolism is also a hallmark of cell senescence, a condition characterized by loss of proliferative activity in cells that remain metabolically active. Accelerated senescence can be triggered by acute or chronic stress and inflammatory responses. In contrast, replicative senescence occurs as part of the physiological aging process and has protective roles in cancer surveillance and wound healing. Importantly, cell senescence can also change or hamper response to diverse therapeutic treatments. Understanding the metabolic pathways of senescence in immune and structural cells is therefore critical to detect, prevent, or revert detrimental aspects of senescence‐related immunopathology, by developing specific diagnostics and targeted therapies. In this paper, we review the main changes and metabolic alterations occurring in senescent immune cells (macrophages, B cells, T cells). Subsequently, we present the metabolic footprints described in translational studies in patients with chronic asthma and chronic obstructive pulmonary disease (COPD), and review the ongoing preclinical studies and clinical trials of therapeutic approaches aiming at targeting metabolic pathways to antagonize pathological senescence. Because this is a recently emerging field in allergy and clinical immunology, a better understanding of the metabolic profile of the complex landscape of cell senescence is needed. The progress achieved so far is already providing opportunities for new therapies, as well as for strategies aimed at disease prevention and supporting healthy aging. [ABSTRACT FROM AUTHOR]

Despite the growing interest in incorporating response time data into item response models, there has been a lack of research investigating how the effect of speed on the probability of a correct response varies across different groups (e.g., experimental conditions) for various items (i.e., differential response time item analysis). Furthermore, previous research has shown a complex relationship between response time and accuracy, necessitating a functional analysis to understand the patterns that manifest from this relationship. In this study, response time data are incorporated into an item response model for two purposes: (a) to examine how individuals' speed within an experimental condition affects their response accuracy on an item, and (b) to detect the differences in individuals' speed between conditions in the presence of within‐condition effects. For these two purposes, by‐variable smooth functions are employed to model differential and functional response time effects by experimental condition for each item. This model is illustrated using an empirical data set to describe the effect of individuals' speed on their reading comprehension ability in two experimental conditions of reading medium (paper vs. digital) by item. A simulation study showed that the recovery of parameters and by‐variable smooth functions of response time was satisfactory, and that the type I error rate and power of the test for the by‐variable smooth function of response time were acceptable in conditions similar to the empirical data set. In addition, the proposed method correctly identified the range of response time where between‐condition differences in the effect of response time on the probability of a correct response were accurate. [ABSTRACT FROM AUTHOR]

The article focuses on the challenges of applying nutrition evidence to individualized care, summarizing a position paper from the Academy of Nutrition Sciences. It discusses strategies to address the complexity of tailoring nutrition guidance to meet individual needs, emphasizing the importance of personalized nutrition approaches in healthcare settings.

Efficacious, effective and efficient communication between healthcare professionals (HCP) and patients is essential to achieve a successful therapeutic alliance. Telemedicine (TM) has been used for decades but during the COVID‐19 pandemic its use has become widespread. This position paper aims to describe the terminology and most important forms of TM among HCP and patients and review the existing studies on the uses of TM for asthma and allergy. Besides, the advantages and risks of TM are discussed, concluding that TM application reduces costs and time for both, HCP and patients, but cannot completely replace face‐to‐face visits for physical examinations and certain tests that are critical in asthma and allergy. From an ethical point of view, it is important to identify those involved in the TM process, ensure confidentiality and use communication channels that fully guarantee the security of the information. Unmet needs and directions for the future regarding implementation, data protection, privacy regulations, methodology and efficacy are described. [ABSTRACT FROM AUTHOR]

Microfluidic based sensors are one of the emerging alternatives for bringing solutions studies on paper platforms. Microfluidic paper assisted platform was developed over here through a simple, easy, cost effective and instrument free process. The self‐same method of waxing through crayoning, was estimated thoroughly on different paper platforms. Varied parameter including type of crayoning, way of patterning, color effect, wicking rate and channel optimization was performed on paper milieus. Optimized time of baking for obtaining controlled penetration ranges from 2 min to 8 min depending on the type of paper used. Wax crayoning was preferred over oil pasteling for making hydrophobic barriers uniformly, solid as well fully penetrated within paper inner layers. Fabrication through this easy cost‐effective route allows a formation of hydrophilic reaction or sensing zone of 0.25 cm2 with sufficient reactive area. Further sensing of dopamine on paper platform was carried using paper chip adsorbed with fluorescent modified graphene quantum dots as sensing material. The patterned paper showed advantage as only few microliter (5 μl to 10 μl) range of sample volume was required for testing. Fluorescence quenching with increase of concentration was witnessed where around 25–75 μM dopamine concentration was positively tested through naked eye; which for the first time was demonstrated here via robust wax crayoning method for developing paper based biosensor. [ABSTRACT FROM AUTHOR]

Printed electronic paper identifies its interest in flexible organic electronics and sustainable and clean energy applications because of its straightforward production method, cost‐effectiveness, and positive environmental impact. However, current limitations include restricted material thickness and the use of supporting substrate for printing. Here, 2D and 3D electronic patterned paper are fabricated from direct ink writing (DIW) nanocellulose and PEDOT:PSS‐based materials using syringe deposition and 3D printing. The conductor patterns are integrated in the bulk of the paper, while non‐conductive sections are used as support to form free‐standing paper. The strong interface between the patterns of electronic patterned paper gives mechanical stability for practical handling. The conductive paper‐based electrode has 202 S cm−1 and is capable of handling electric current up to 0.7 A, which can be used for high‐power devices. Printed supercapacitor papers show high specific energy of 4.05 Wh kg−1, specific power of 4615 W kg−1 at 0.06 A g−1, and capacitance retention above 95% after 2000 cycles. The new design structure of electronic patterned papers presents a solution for additive manufacturing of paper‐based composites for supercapacitors, wearable electronics, or sensors for smart packaging. [ABSTRACT FROM AUTHOR]

At the shelf, highly bleached (soft and white) toilet papers samples of different brands and one grayish toilet paper sample of another brand have been selected for spectroscopy and X‐ray diffraction analysis, in order to figure out if they can present allergic components in their chemical composition. Traces of Ca, associated with the presence of CaC2O4H2O was found in one of the highly bleached toilet paper samples and in the grayish one. However, no traces of fungi were found in the scanning electronic microscopy images. A trial correlation between the chemical composition and mechanical properties of the tested toilet paper samples, surprisingly shows that the grayish toilet paper sample presents the highest softness. [ABSTRACT FROM AUTHOR]

Background: Regulatory aspects of transfusion medicine add complexity in blinded transfusion trials when considering various electronic record keeping software and blood administration processes. The aim of this study is to explore strategies when blinding transfusion components and products in paper and electronic medical records. Methods: Surveys were collected and interviews were conducted for 18 sites across various jurisdictions in North America to determine solutions applied in previous transfusion randomized control trials. Results: Sixteen responses were collected of which 11 had previously participated in a transfusion randomized control trial. Various solutions were reported which were specific to the laboratory information system (LIS) and electronic medical record (EMR) combinations although solutions could be grouped into four categories which included the creation of a study product code in the LIS, preventing the transmission of data from the LIS to the EMR, utilizing specialized stickers and labels to conceal product containers and documents in the paper records, and modified bedside procedures and documentation. Discussion: LIS and EMR combinations varied across sites, so it was not possible to determine combination‐specific solutions. The study was able to highlight solutions that may be emphasized in future iterations of LIS and EMR software as well as procedural changes that may minimize the risk of unblinding. [ABSTRACT FROM AUTHOR]

The article outlines the intricate process of applying nutrition evidence to personalized care, emphasizing the importance of sound evidence-based dietary advice in maintaining health and managing diseases. It also discusses the challenges faced in integrating research findings into individualized nutrition interventions, including navigating conflicting information sources and tailoring treatments to diverse health and social situations.

Patch testing is the only clinically applicable diagnostic method for Type IV allergy. The availability of Type IV patch test (PT) allergens in Europe, however, is currently scarce. This severely compromises adequate diagnostics of contact allergy, leading to serious consequences for the affected patients. Against this background, the European Society of Contact Dermatitis (ESCD) has created a task force (TF) (i) to explore the current availability of PT substances in different member states, (ii) to highlight some of the unique characteristics of Type IV vs. other allergens and (iii) to suggest ways forward to promote and ensure availability of high‐quality patch testing substances for the diagnosis of Type IV allergies throughout Europe. The suggestions of the TF on how to improve the availability of PT allergens are supported by the ESCD, the European Academy of Allergy and Clinical Immunology, and the European Academy of Dermatology and Venereology and intend to provide potential means to resolve the present medical crisis. [ABSTRACT FROM AUTHOR]

Objective Methods Results Conclusion Increases in global temperatures and extreme weather events associated with climate change have complex yet poorly understood detrimental impacts on human health. We reviewed the current published literature on climate change–related effects and rheumatic conditions.To summarize our current understanding of the likely effects of climate change, including increased air pollution, on rheumatic disease, we searched the published, peer‐reviewed English‐language literature from January 2000 to December 2022. Articles were reviewed by a team of rheumatologists and clinical and translational science researchers. Systematic review articles were not included but informed additional literature searches.After extensive examination and adjudication, 88 articles met inclusion criteria and were selected for review. Much of the epidemiologic investigations assessed associations between air pollution and increased risk of development of rheumatoid arthritis, anti–citrullinated protein antibodies, flares of gout, and hospitalizations for systemic lupus erythematosus. Increased heat vulnerability was associated with higher odds of recurrent hospitalizations across rheumatic conditions. Mechanisms for observed associations are poorly understood but could include the effects of epigenetic changes, oxidative stress, and inflammatory cytokines. Studies had limitations, including restricted geography and populations studied without focus on historically marginalized communities at highest risk for adverse effects from pollution and climate change, the relative lack of mechanistic evaluations, and most with only indirect links to climate change.To date, the published literature lacks studies that directly examine effects of climate change on rheumatic diseases. Collaborative translational and epidemiologic research is needed to enhance our understanding and awareness in this area. [ABSTRACT FROM AUTHOR]