Search

Micro-sized silicon anodes can significantly increase the energy density of lithium-ion batteries with low cost. However, the large silicon volume changes during cycling cause cracks for both organic-inorganic interphases and silicon particles. The liquid electrolytes further penetrate the cracked silicon particles and reform the interphases, resulting in huge electrode swelling and quick capacity decay. Here we resolve these challenges by designing a high-voltage electrolyte that forms silicon-phobic interphases with weak bonding to lithium-silicon alloys. The designed electrolyte enables micro-sized silicon anodes (5 µm, 4.1 mAh cm−2) to achieve a Coulombic efficiency of 99.8% and capacity of 2175 mAh g−1 for >250 cycles and enable 100 mAh LiNi0.8Co0.15Al0.05O2 pouch full cells to deliver a high capacity of 172 mAh g−1 for 120 cycles with Coulombic efficiency of >99.9%. The high-voltage electrolytes that are capable of forming silicon-phobic interphases pave new ways for the commercialization of lithium-ion batteries using micro-sized silicon anodes. Micro-sized silicon are promising anode materials due to low-cost and high-energy, yet their application is hindered by inaccessible electrolytes. Here, the authors report sulfolane-based electrolytes that form silicon-phobic interphases and enable high-voltage pouch cells to achieve superior cycle life. [ABSTRACT FROM AUTHOR]

This document is a correction notice for an article titled "High voltage electrolytes for lithium-ion batteries with micro-sized silicon anodes" published in Nature Communications. The correction addresses errors in the labeling of y-axis labels for certain figures and the caption for another figure. The original article has been corrected, and supplementary information is available online. The authors of the article are listed as Ai-Min Li, Zeyi Wang, Travis P. Pollard, Weiran Zhang, Sha Tan, Tianyu Li, Chamithri Jayawardana, Sz-Chian Liou, Jiancun Rao, Brett L. Lucht, Enyuan Hu, Xiao-Qing Yang, Oleg Borodin, and Chunsheng Wang. [Extracted from the article]

Due to the non-flammable nature of water-based electrolytes, aqueous lithium-ion batteries are resistant to catching fire. However, they are not immune to the risk of explosion, since the sealing structure adopted by current batteries limits the dissipation of heat and pressure within the cells. Here, we report a safe aqueous lithium-ion battery with an open configuration using water-in-salt electrolytes and aluminum oxide coated anodes. The design can inhibit the self-discharge by substantially suppressing the oxygen reduction reaction on lithiated anodes and enable good cycle performance over 1000 times. Our study may open a pathway towards safer lithium-ion battery designs. Despite the non-flammable nature of water-based electrolytes, aqueous lithium-ion batteries still carry an explosion risk due to the sealing structure. Here the authors report a safe aqueous battery with an open configuration, utilizing highly concentrated electrolytes and Al2O3 coated anodes. [ABSTRACT FROM AUTHOR]

A novel bismuth-carbon composite, in which bismuth nanoparticles were anchored in a nitrogen-doped carbon matrix (Bi@NC), is proposed as anode for high volumetric energy density lithium ion batteries (LIBs). Bi@NC composite was synthesized via carbonization of Zn-containing zeolitic imidazolate (ZIF-8) and replacement of Zn with Bi, resulting in the N-doped carbon that was hierarchically porous and anchored with Bi nanoparticles. The matrix provides a highly electronic conductive network that facilitates the lithiation/delithiation of Bi. Additionally, it restrains aggregation of Bi nanoparticles and serves as a buffer layer to alleviate the mechanical strain of Bi nanoparticles upon Li insertion/extraction. With these contributions, Bi@NC exhibits excellent cycling stability and rate capacity compared to bare Bi nanoparticles or their simple composites with carbon. This study provides a new approach for fabricating high volumetric energy density LIBs. [ABSTRACT FROM AUTHOR]