Search

Interest towards electric vehicle adoption is on the rise due to the lower running and maintenance cost it offers, along with zero tailpipe emissions. Range anxiety is one of the only concern that affects the adoption of electric vehicles. The state of charge of the traction battery pack has to be accurately determined and provided to the user to avoid range anxiety. Minute battery parameters has to be considered to improve the accuracy of the state of charge determination. In order to overcome the problem of range anxiety, an innovative strategy that takes into account how vibrations affect the performance of EV batteries is developed in this research. By doing this, the state of charge estimation precision is improved and thereby raises the driver's faith in electric vehicles. The impacts and vibrations felt on the traction battery pack during driving would lead to heat generation. The heat generated is found to be highest when the vibrations resonate at the natural frequencies of the traction battery pack. The natural frequency of the battery pack is considered when the battery is kept in the battery chamber of the two-wheeler electric vehicle. The vibrations at natural frequency produces heat which is accounted for when the state of charge is determined. To obtain accurate state of charge estimation, a Kalman filter-based approach is used. The Kalman filter-based estimation uses the conventional methods which are the open circuit voltage method and the Coulomb counting method to improve the estimation process along with the consideration of the heat component due to vibrations and impact. The vibration analysis is performed using MATLAB, while the state of charge determination is implemented in hardware and the Kalman estimation done using Python. The system is modelled on an electric two-wheeler platform and the testing is done to compare the state of charge accuracy of the open circuit voltage method, the Coulomb counting method and the Kalman filter-based estimation approach. The inclusion of the vibrational heat analysis for State of Charge estimation in the hardware testing of the electric two-wheeler provides an accurate state of charge value. [ABSTRACT FROM AUTHOR]

Electric vehicles are a clean energy transportation option recently emerged as an alternative to the conventional engine powered vehicles. These vehicles are using Lithium ion battery as energy storage for their propulsion because of its energy density. Due to the chemical reaction of battery elements and internal resistance, the battery releases heat during charging and discharging. Unless this heat is controlled to be within the battery optimum operating temperature, the battery performance and life will be seriously affected. This paper is dedicated to conduct fundamental studies on the battery cooling. A three dimensional numerical analysis is made using PHOENICS version 2018. Cylindrical type battery cell is used in this study. The study gives insight to thermal response, flow field and temperature profiles in the battery module with air flow direction relative to battery cell orientation and cell arrangement. Temperature variation along the flow, and transverse direction of the battery pack is discussed. With a 5 mm inter cell spacing and symmetric arrangement, maximum cell to cell temperature variation in the axial flow type is observed to be 0.2 °C, while in the radial flow type about 3.5 °C for same arrangement. Quantitative and qualitative results obtained from the numerical test are presented. Furthermore, this work is believed to contribute to the improvement of battery air cooling system design in such a way the associated cost and efficiency is compromised. [ABSTRACT FROM AUTHOR]

In order to suppress leakage current caused in the traditional multi-cells series Li-ion battery pack protection system, a new battery voltage transfer method is presented in this paper, which uses the current generated in the transfer process of one of the batteries to compensate for the leakage of itself and other cells except the top cell. Based on the 0.18 µm Bipolar and CMOS and DMOS technology, this proposed circuit has been integrated into a 7-cells Li-ion battery charge and discharge protection chip successfully. The experimental results of cell balancing confirm that the balancing algorithm can help with the shortage of the voltage transfer circuit. Furthermore, analysis of 20 samples shows that the new method can greatly suppress the battery leakage. Compared with the traditional solution, the voltage transfer circuit proposed in this paper greatly reduces the leakage current, which helps to extend the service life of the battery. [ABSTRACT FROM AUTHOR]

Purpose: Battery electric vehicles (BEVs) have been widely publicized. Their driving performances depend mainly on lithium-ion batteries (LIBs). Research on this topic has been concerned with the battery pack's integrative environmental burden based on battery components, functional unit settings during the production phase, and different electricity grids during the use phase. We adopt a synthetic index to evaluate the sustainability of battery packs. Methods: A life cycle assessment (LCA) is used to reveal the aspects of global warming potential (GWP), water consumption, and ecological impact during the two phases. An integrative indicator, the footprint-friendly negative index (FFNI), is combined with footprint family indicators of battery packs and electricity sources. We investigate two cases of 1 kg battery production and 1 kWh battery production to assess nickel–cobalt–manganese (NMC) and lithium–iron phosphate (LFP) battery packs and compare their degrees of environmental friendliness. Then, we break down the battery pack to identify the key factors influencing the environmental burden and use sensitivity analysis to analyze the causes. Moreover, we evaluate the environmental impact of battery packs during the use phase among different regions. Results and discussion: Regardless of the functional unit (FU), the weights of the carbon footprint (CF), water footprint (WF), and ecological footprint (EF) are approximately the same. The results of the integrative environmental indicator, the FFNI, illustrate that the LFP is approximately 0.014, which is lower than that of the NMC battery pack in the mass production case. When using energy units as the FU, the FFNI of the NMC is 0.015, which reflects a lower environmental burden than that of other battery packs. In the use phase, 1kWh electricity consumption in China and Europe has the highest and lowest FFNI, respectively. When breaking down the battery-pack components, the simplified model advocates the cathode as the major contributor that determines the total environmental performance. In the following sensitivity analysis, the battery management system (BMS) is found to be the most intensive part of the footprint of most battery packs. Conclusion: FU can influence the evaluation results. Developing proper renewable energy sources can reduce the footprints of battery packs during the use phase. The positive electrode pastes in the battery cell, BMS, and packaging in the battery pack can influence the environmental burden. Adopting green materials in sections like the BMS may be a specific measure to enhance the environmental friendliness of a battery pack during the production phase. [ABSTRACT FROM AUTHOR]