Search

Investigating the research trends within a scientific domain by analyzing semantic information extracted from scientific journals has been a topic of interest in the natural language processing (NLP) field. A research trend evaluation is generally based on the time evolution of the term occurrence or the term topic, but it neglects an important aspect—research publication latency. The average time lag between the research and its publication may vary from one month to more than one year, and it is a characteristic that may have significant impact when assessing research trends, mainly for rapidly evolving scientific areas. To cope with this problem, the present paper is the first work that explicitly considers research publication latency as a parameter in the trend evaluation process. Consequently, we provide a new trend detection methodology that mixes auto-ARIMA prediction with Mann–Kendall trend evaluations. The experimental results in an electronic design automation case study prove the viability of our approach.

This paper introduced the use of two new adsorbents, Akrosorb soda-lime and Bentonite clay, for refinery flare flue gas capture and storage. This study also developed a novel pilot plant model with 409.7149 kg/h capacity refinery flare emission capture with a novel adsorption column configuration using Akrosorb soda-lime and Bentonite clay adsorbents. The flare flue gas adsorption unit was designed, fabricated, test run, and commissioned. The adsorption column temperature is 28 ± 10 °C and has a pressure of 131.7 kPa. The novel plant RSM optimization result shows that 93.24% of CO2 and 62.18% of CO were absorbed, while 86.14% of NOx and 55.87% of HC were absorbed. The established optimum conditions of CO2, NOx, HC, and CO removal efficiency are 22 °C, 2 atm, and 60 min. The variation in flare gas emission could impact the removal efficiency of the plant. The results show the maximum adsorption ability or capacity of 314.30 mg/g, and 68.90 mg/g was reached at 60 min for Akrosorb soda-lime and molded Bentonite adsorbents. Therefore, the developed novel technology for CO2 and other GHG capture is technically feasible and friendly. The combined usage of both adsorbents will enhance the capture of GHG at a low cost compared to using Akrosorb alone as an adsorbent.

In order to solve the Sylvester equations more efficiently, a new four parameters positive and skew-Hermitian splitting (FPPSS) iterative method is proposed in this paper based on the previous research of the positive and skew-Hermitian splitting (PSS) iterative method. We prove that when coefficient matrix A and B satisfy certain conditions, the FPPSS iterative method is convergent in the parameter&rsquo, s value region. The numerical experiment results show that compared with previous iterative method, the FPPSS iterative method is more effective in terms of iteration number IT and runtime.

This paper presents a simplified model of the population migration problem, addressed to first-year engineering students in order to show them the use of linear algebra tools. The study consists of predicting the census in the city centre and in the suburbs, determining the city population equilibrium point, and making a sociological interpretation of population flows. This practical problem is part of the seminar “Applications of Linear Algebra in Engineering”, which is being held at the Universitat Politècnica de Catalunya-BarcelonaTech (UPC). This seminar consists in the learning of linear algebra by the implementation of real applications where mathematical tools are required to resolve them. This paper presents an application of linear algebra to the population migration problem and analyses students’ appreciation through anonymous surveys and personal interviews. The surveys assessed students’ motivation towards the subject of linear algebra and their learning of mathematical concepts. Personal interviews were conducted for students in order to let them express in detail their opinion about the seminar. The results confirm that the introduction of real applications in the learning of mathematics increases students’ motivation and involvement, which implies an improvement in students’ performance in the first courses of STEM degrees. Peer Reviewed Objectius de Desenvolupament Sostenible::4 - Educació de Qualitat

The video images captured at long range usually have low contrast floating objects of interest on a sea surface. A comparative experimental study of the statistical characteristics of reflections from floating objects and from the agitated sea surface showed the difference in the correlation and spectral characteristics of these reflections. The functioning of the recently proposed modified matched subspace detector (MMSD) is based on the separation of the observed data spectrum on two subspaces: relatively low and relatively high frequencies. In the literature the MMSD performance has been evaluated in generally and moreover using only a sea model (additive Gaussian background clutter). This paper extends the performance evaluating methodology for low contrast object detection and moreover using only the real sea dataset. This methodology assumes an object of low contrast if the mean and variance of the object and the surrounding background are the same. The paper assumes that the energy spectrum of the object and the sea are different. The paper investigates a scenario in which an artificially created model of a floating object with specified statistical parameters is placed on the surface of a real sea image. The paper compares the efficiency of the classical Matched Subspace Detector (MSD) and MMSD for detecting low-contrast objects on the sea surface. The article analyzes the dependence of the detection probability at a fixed false alarm probability on the difference between the statistical means and variances of a floating object and the surrounding sea.

The Coronavirus herd immunity optimizer (CHIO) is a new human-based optimization algorithm that imitates the herd immunity strategy to eliminate of the COVID-19 disease. In this paper, the coronavirus herd immunity optimizer (CHIO) is modified to tackle a discrete power scheduling problem in a smart home (PSPSH). PSPSH is a combinatorial optimization problem with NP-hard features. It is a highly constrained discrete scheduling problem concerned with assigning the operation time for smart home appliances based on a dynamic pricing scheme(s) and several other constraints. The primary objective when solving PSPSH is to maintain the stability of the power system by reducing the ratio between average and highest power demand (peak-to-average ratio (PAR)) and reducing electricity bill (EB) with considering the comfort level of users (UC). This paper modifies and adapts the CHIO algorithm to deal with such discrete optimization problems, particularly PSPSH. The adaptation and modification include embedding PSPSH problem-specific operators to CHIO operations to meet the discrete search space requirements. PSPSH is modeled as a multi-objective problem considering all objectives, including PAR, EB, and UC. The proposed method is examined using a dataset that contains 36 home appliances and seven consumption scenarios. The main CHIO parameters are tuned to find their best values. These best values are used to evaluate the proposed method by comparing its results with comparative five metaheuristic algorithms. The proposed method shows encouraging results and almost obtains the best results in all consumption scenarios.

This paper proposes a modification of the imperialist competitive algorithm to solve multi-objective optimization problems with hybrid methods (MOHMICA) based on a modification of the imperialist competitive algorithm with hybrid methods (HMICA). The rationale for this is that there is an obvious disadvantage of HMICA in that it can only solve single-objective optimization problems but cannot solve multi-objective optimization problems. In order to adapt to the characteristics of multi-objective optimization problems, this paper improves the establishment of the initial empires and colony allocation mechanism and empire competition in HMICA, and introduces an external archiving strategy. A total of 12 benchmark functions are calculated, including 10 bi-objective and 2 tri-objective benchmarks. Four metrics are used to verify the quality of MOHMICA. Then, a new comprehensive evaluation method is proposed, called “radar map method”, which could comprehensively evaluate the convergence and distribution performance of multi-objective optimization algorithm. It can be seen from the four coordinate axes of the radar maps that this is a symmetrical evaluation method. For this evaluation method, the larger the radar map area is, the better the calculation result of the algorithm. Using this new evaluation method, the algorithm proposed in this paper is compared with seven other high-quality algorithms. The radar map area of MOHMICA is at least 14.06% larger than that of other algorithms. Therefore, it is proven that MOHMICA has advantages as a whole.

In this paper we propose an approximation method for solving second kind Volterra integral equation systems by radial basis functions. It is based on the minimization of a suitable functional in a discrete space generated by compactly supported radial basis functions of Wendland type. We prove two convergence results, and we highlight this because most recent published papers in the literature do not include any. We present some numerical examples in order to show and justify the validity of the proposed method. Our proposed technique gives an acceptable accuracy with small use of the data, resulting also in a low computational cost.

Techniques and methods of linear optimization underwent a significant improvement in the 20th century which led to the development of reliable mixed integer linear programming (MILP) solvers. It would be useful if these solvers could handle mixed integer nonlinear programming (MINLP) problems. Piecewise linear approximation (PLA) is one of most popular methods used to transform nonlinear problems into linear ones. This paper will introduce PLA with brief a background and literature review, followed by describing our contribution before presenting the results of computational experiments and our findings. The goals of this paper are (a) improving PLA models by using nonuniform domain partitioning, and (b) proposing an idea of applying PLA partially on MINLP problems, making them easier to handle. The computational experiments were done using quadratically constrained quadratic programming (QCQP) and MIQCQP and they showed that problems under PLA with nonuniform partition resulted in more accurate solutions and required less time compared to PLA with uniform partition.

Botnet is an urgent problem that will reduce the security and availability of the network. When the bot master launches attacks to certain victims, the infected users are awakened, and attacks start according to the commands from the bot master. Via Botnet, DDoS is an attack whose purpose is to paralyze the victim’s service. In all kinds of DDoS, SYN flood is still a problem that reduces security and availability. To enhance the security of the Internet, IDS is proposed to detect attacks and protect the server. In this paper, the concept of centroid-based classification is used to enhance performance of the framework. An anomaly-based IDS framework which combines K-means and KNN is proposed to detect SYN flood. Dimension reduction is designed to achieve visualization, and weights can adjust the occupancy ratio of each sub-feature. Therefore, this framework is also suitable for use on the modern symmetry or asymmetry architecture of information systems. With the detection by the framework proposed in this paper, the detection rate is 96.8 percent, the accuracy rate is 97.3 percent, and the false alarm rate is 1.37 percent.

Social networking sites (SNSs) are used widely, raising new issues in terms of privacy and disclosure. Although users are often concerned about their privacy, they often publish information on social networking sites willingly. Due to the growing number of users of social networking sites, substantial research has been conducted in recent years. In this paper, we conducted a systematic review of papers that included structural equations models (SEM), or other statistical models with privacy and disclosure constructs. A total of 98 such papers were found and included in the analysis. In this paper, we evaluated the presentation of results of the models containing privacy and disclosure constructs. We carried out an analysis of which background theories are used in such studies and have also found that the studies have not been carried out worldwide. Extending the research to other countries could help with better user awareness of the privacy and self-disclosure of users on SNSs.

This paper presents an alternative system called the axial-flux dual-stator toothless permanent magnet machine (AFDSTPMM) system for flywheel energy storage. This system lowers self-dissipation by producing less core loss than existing structures; a permanent magnet (PM) array is put forward to enhance the air–gap flux density of the symmetrical air gap on both sides. Moreover, its vertical stability is strengthened through the adoption of an axial-flux machine, so expensive active magnetic bearings can be replaced. The symmetry configuration of the AFDSTPMM system is shown in this paper. Then, several parts of the AFDSTPMM system are optimized thoroughly, including stator windings, number of pole pairs and the PM parameters. Further, the performance of the proposed PM array, including back-EMFs, air–gap flux density, average torque, torque ripple and over-load capacity, are compared with the Halbach PM array and spoke PM array, showing the superiority of proposed configuration. Finally, 3D simulations were made to testify for the 2D analyses.

Considering transient processes where liquid/solid phase change occurs, this paper focuses on the associated modeling and numerical treatment in the frame of “Computational Fluid Dynamics” simulations. While being of importance in many industrial applications involving solidification and melting of mixed materials, including power and manufacturing engineering, the first application of this work pertains to the analysis of severe accidents in a nuclear reactor. Indeed, in this context, the molten core materials (a.k.a. corium) can form a high-temperature multiphase liquid pool at the boundary of which fusion and solidification phenomena are of prime importance. In this context, even if materials at play are treated as pure components, it is mandatory to distinguish two different phase change temperatures with a solid fusion temperature and a liquid solidification temperature. Accordingly, in the frame of a sharp interface representation, the paper introduces non-classical heterogeneous conditions at the liquid/solid boundary in such a way that both moving interface (through Stefan conditions associated with fusion or solidification) and static interface (imposing heat flux continuity) are supported at the same time on different spatial locations along this boundary. Within a monolithic resolution of Navier–Stokes and heat conduction equations, this interface is explicitly tracked with combined Front-Tracking and VOF methods. In order to ensure zero velocity in the solid phase, an Immersed Boundary Method and a direct forcing penalization are also introduced. The main relevant features of this combination of numerical methods are discussed along with their implementation in the TrioCFD code taking advantage of the pre-existing code capabilities. Numerical simulations including both verification tests and a case of interest for our industrial application are reported and demonstrate the applicability of the proposed triptych model+methods+code to treat such problems. The numerical tools and the simulation code developed in this work could be used not only in the several accident context but also to simulate melting, solidification and fusion processes occurring in aerodynamics, hypersonic reentry vehicles and laser applications to cite but a few.

This paper provides a brief overview of modern applications of nonbinary logic models, where the design of heterogeneous computing systems with small computing units based on three-valued logic produces a mathematically better and more effective solution compared to binary models. For application, it is necessary to implement circuits composed of chipsets, the operation of which is based on three-valued logic. To be able to implement such schemes, a fundamentally important theoretical problem must be solved: the problem of completeness of classes of functions of three-valued logic. From a practical point of view, the completeness of the class of such functions ensures that circuits with the desired operations can be produced from an arbitrary (finite) set of chipsets. In this paper, the closure operator on the set of functions of three-valued logic that strengthens the usual substitution operator is considered. It is shown that it is possible to recover the sublattice of closed classes in the general case of closure of functions with respect to the classical superposition operator. The problem of the lattice of closed classes for the class of functions T2 preserving two is considered. The closure operators R1 for the functions that differ only by dummy variables are considered equivalent. This operator is withiin the scope of interest of this paper. A lattice is constructed for closed subclasses in T2={f|f(2,…,2)=2}, a class of functions preserving two.

At present, the study concerning pricing variance swaps under CIR the (Cox–Ingersoll–Ross)–Heston hybrid model has achieved many results; however, due to the instantaneous interest rate and instantaneous volatility in the model following the Feller square root process, only a semi-closed solution can be obtained by solving PDEs. This paper presents a simplified approach to price log-return variance swaps under the CIR–Heston hybrid model. Compared with Cao’s work, an important feature of our approach is that there is no need to solve complex PDEs; a closed-form solution is obtained by applying the martingale theory and Ito^’s lemma. The closed-form solution is significant because it can achieve accurate pricing and no longer takes time to adjust parameters by numerical method. Another significant feature of this paper is that the impact of sampling frequency on pricing formula is analyzed; then the closed-form solution can be extended to an approximate formula. The price curves of the closed-form solution and the approximate solution are presented by numerical simulation. When the sampling frequency is large enough, the two curves almost coincide, which means that our approximate formula is simple and reliable.

The urban public transportation system is an important part of urban transportation, and the rationality of public transportation routes layout plays a vital role in the transportation of the city. Improving the efficiency of public transportation can have a positive impact on the operation of the public transportation system. This paper uses complex network theory and the symmetry of the up and down bus routes and stations to establish an urban public transit network model and calculates the probability of passengers choosing different routes in the public transit network according to passenger travel impedance. Based on passenger travel impedance, travel path probability and passenger travel demand, the links are weighed, and the network efficiency calculation method is improved. Finally, the public transit network optimization model was established with network efficiency as the objective function and solved by the ant colony algorithm. In order to verify the effectiveness of the model and the solution method, this paper selects areas in Nanguan District of Changchun City for example analysis. The result shows that the efficiency of the optimized network is 8.5% higher than that of the original network, which proves the feasibility of the optimized model and solution method.

In 2008, Hedetniemi et al. introduced (1,k)-domination in graphs. The research on this concept was extended to the problem of existence of independent (1,k)-dominating sets, which is an NP-complete problem. In this paper, we consider independent (1,1)- and (1,2)-dominating sets, which we name as (1,1)-kernels and (1,2)-kernels, respectively. We obtain a complete characterization of generalized corona of graphs and G-join of graphs, which have such kernels. Moreover, we determine some graph parameters related to these sets, such as the number and the cardinality. In general, graph products considered in this paper have an asymmetric structure, contrary to other many well-known graph products (Cartesian, tensor, strong).

The redundancy of functional blocks and critical assemblies in radio-electronic equipment is among the most widely used techniques for increasing reliability. Complex redundant systems raise the problem of electromagnetic compatibility (EMC). Ignoring EMC requirements can lead to partial or complete REE failures. In this paper, the authors analyze a noise-protective electrical circuit with triple modal reservation (a promising type of cold redundancy). A multilayer stripline is investigated, the conductors of which are symmetrically arranged relative to two planes. On account of the strong electromagnetic coupling, this protective circuit can decompose dangerous ultra-wideband (UWB) interference received at the input of the primary or redundant circuits into unipolar pulses of lower amplitude. Using this approach, due to the symmetry of the conductors, equal decomposition efficiency could be achieved. However, the effect of UWB interference at the input of one of the conductors produces bipolar pulses at the output of the other conductors. In this paper, the authors evaluate the dangers of unipolar and bipolar decomposed pulses and use modal analysis to mathematically determine the polarities and amplitudes of the decomposed pulses at all output nodes for a pseudo-matched structure. By using the quasistatic approach with and without losses, the time responses to a trapezoidal pulse with a total duration of 60 ps, which simulates UWB interference, are obtained. To confirm the results of modal analysis and quasistatic simulation, an experimental study is performed. Using a stroboscopic oscilloscope DSA 8300, the authors obtained a transient response to a step excitation. Then, taking the derivative, the response to a trapezoidal pulse with a total duration of 140 ps was obtained. To analyze the criticality of the decomposed pulses, N-norms are used. In the general case, it is shown that the UWB interference is decomposed into four pulses of lower amplitude. At the same time, the value of each N-norm indicates its significant attenuation. For example, the amplitude of the UWB pulse acting on the input of the reserved conductor decreases by 10.31–8.93 times. Such results numerically demonstrate the high efficiency of the suggested approach when it comes to protecting equipment against UWB interference. It is also shown that the probability of dielectric breakdown and damage to electronic components in redundant circuits is lower than in a primary circuit. This is due to the fact that the value of N3 in the redundant circuit is 2.38 times less than in the primary circuit. However, the results demonstrate that arcing is highly probable both in primary and redundant circuits. Finally, aspects of symmetry/asymmetry in the problem under investigation are emphasized.

Multi-Criteria Decision Making (MCDM) methods have rapidly developed and have been applied to many areas for decision making in engineering. Apart from that, the process to select fault-diagnosis sensor for Fuel Cell Stack system in various options is a multi-criteria decision-making (MCDM) issue. However, in light of the choosing of fault diagnosis sensors, there is no MCDM analysis, and Fuel Cell Stack companies also urgently need a solution. Therefore, in this paper, we will use MCDM methods to analysis the fault-diagnosis sensor selection problem for the first time. The main contribution of this paper is to proposed a fault-diagnosis sensor selection methodology, which combines the rank reversal resisted AHP and TOPSIS and supports Fuel Cell Stack companies to select the optimal fault-diagnosis sensors. Apart from that, through the analysis, among all sensor alternatives, the acquisition of the optimal solution can be regarded as solving the symmetric or asymmetric problem of the optimal solution, which just maps to the TOPSIS method. Therefore, after apply the proposed fault-diagnosis sensor selection methodology, the Fuel Cell Stack system fault-diagnosis process will be more efficient, economical, and safe.

This paper proposes a new multi-objective bi-level programming model for the ring road bus lines and fare design problems. The proposed model consists of two layers: the traffic management operator and travelers. In the upper level, we propose a multi-objective bus lines and fares optimization model in which the operator’s profit and travelers’ utility are set as objective functions. In the lower level, evolutionary multi agent model of travelers’ bounded rational reinforcement learning with social interaction is introduced. A solution algorithm for the multi-objective bi-level programming is developed on the basis of the equalization algorithm of OD matrix. A numerical example based on a real case was conducted to verify the proposed models and solution algorithm. The computational results indicated that travel choice models with different degrees of rationality significantly changed the optimization results of bus lines and the differentiated fares; furthermore, the multi-objective bi-level programming in this paper can generate the solution to reduce the maximum section flow, increase the profit, and reduce travelers’ generalized travel cost.

In the paper, the comparison between the efficiency of using artificial intelligence methods and the efficiency of using classical methods in modelling the industrial processes is made, considering as a case study the separation process of the 18O isotope. Firstly, the behavior of the considered isotopic separation process is learned using neural networks. The comparison between the efficiency of these methods is highlighted by the simulations of the process model, using the mentioned modelling techniques. In this context, the final part of the paper presents the proposed model being simulated in different scenarios that can occur in practice, thus resulting in some interesting interpretations and conclusions. The paper proves the feasibility of using artificial intelligence methods for industrial processes modeling; the obtained models being intended for use in designing automatic control systems.

The purpose of this paper is to develop a numerical scheme for the two-dimensional fourth-order fractional subdiffusion equation with variable coefficients and delay. Using the L2−1σ approximation of the time Caputo derivative, a finite difference method with second-order accuracy in the temporal direction is achieved. The novelty of this paper is to introduce a numerical scheme for the problem under consideration with variable coefficients, nonlinear source term, and delay time constant. The numerical results show that the global convergence orders for spatial and time dimensions are approximately fourth order in space and second-order in time.

Recently developed methods in spontaneous speech analytics require the use of speaker separation based on audio data, referred to as diarization. It is applied to widespread use cases, such as meeting transcription based on recordings from distant microphones and the extraction of the target speaker’s voice profiles from noisy audio. However, speech recognition and analysis can be hindered by background and point-source noise, overlapping speech, and reverberation, which all affect diarization quality in conjunction with each other. To compensate for the impact of these factors, there are a variety of supportive speech analytics methods, such as quality assessments in terms of SNR and RT60 reverberation time metrics, overlapping speech detection, instant speaker number estimation, etc. The improvements in speaker verification methods have benefits in the area of speaker separation as well. This paper introduces several approaches aimed towards improving diarization system quality. The presented experimental results demonstrate the possibility of refining initial speaker labels from neural-based VAD data by means of fusion with labels from quality estimation models, overlapping speech detectors, and speaker number estimation models, which contain CNN and LSTM modules. Such fusing approaches allow us to significantly decrease DER values compared to standalone VAD methods. Cases of ideal VAD labeling are utilized to show the positive impact of ResNet-101 neural networks on diarization quality in comparison with basic x-vectors and ECAPA-TDNN architectures trained on 8 kHz data. Moreover, this paper highlights the advantage of spectral clustering over other clustering methods applied to diarization. The overall quality of diarization is improved at all stages of the pipeline, and the combination of various speech analytics methods makes a significant contribution to the improvement of diarization quality.

In this paper, we examine the impact of a massive open online course (MOOC) in the context of outdoor mathematics on the participating teachers’ professional development. We firstly introduce the theoretical background on outdoor mathematics, focusing on math trails with the digital tool MathCityMap and professional development to be accomplished using MOOCs. By taking into account the MOOC “Task Design for Math Trails”, with 93 finalists, we analyze the learning progress of 19 selected case studies from different nations and learning levels by taking into account their answers in a pre- and post-questionnaire and their posts on a specific communication message board, with a special focus on the MOOC’s topics’ task design for outdoor mathematics and the digital tool MathCityMap. The analysis is performed using different quantitative and qualitative approaches. The results show that the teachers studied have benefited from professional development, which is evident in the expansion/evolution of their knowledge from a content, pedagogical, and technological perspective. Finally, we formulate consequences for professional development in STEM education, and conclude the paper with limitations to be drawn and a perspective for further research.

Max-plus algebra is the similarity of the classical linear algebra with two binary operations, maximum and addition. The notation Ax = Bx, where A, B are given (interval) matrices, represents (interval) two-sided (max, plus)-linear system. For the solvability of Ax = Bx, there are some pseudopolynomial algorithms, but a polynomial algorithm is still waiting for an appearance. The paper deals with the analysis of solvability of two-sided (max, plus)-linear equations with inexact (interval) data. The purpose of the paper is to get efficient necessary and sufficient conditions for solvability of the interval systems using the property of the solution set of the non-interval system Ax = Bx. The main contribution of the paper is a transformation of weak versions of solvability to either subeigenvector problems or to non-interval two-sided (max, plus)-linear systems and obtaining the equivalent polynomially checked conditions for the strong versions of solvability.

The aim of this paper is to compute the exact solutions and conservation of a generalized (1 + 1) dimensional system. This can be achieved by employing symbolic manipulation software such as Maple, Mathematica, or MATLAB. In theoretical physics and in many scientific applications, the mentioned system naturally arises. Time, space, and scaling transformation symmetries lead to novel similarity reductions and new exact solutions. The solutions obtained include solitary waves and cnoidal and snoidal waves. The familiarity of closed-form solutions of nonlinear ordinary and partial differential equations enables numerical solvers and supports stability analysis. Although many efforts have been dedicated to solving nonlinear evolution equations, there is no unified method. To the best of our knowledge, this is the first time that Lie point symmetry analysis in conjunction with an ansatz method has been applied on this underlying equation. It should also be noted that the methods applied in this paper give a unique solution set that differs from the newly reported solutions. In addition, we derive the conservation laws of the underlying system. It is also worth mentioning that this is the first time that the conservation laws for the equation under study are derived.

The traditional set stability of Boolean networks (BNs) refers to whether all the states can converge to a given state subset. Different from the existing results, the set stability investigated in this paper is whether all states in a given initial set can converge to a given destination set. This paper studies the set stability and set stabilization avoiding undesirable sets of BNs and Boolean control networks (BCNs), respectively. First, by virtue of the semi-tensor product (STP) of matrices, the dynamics of BNs avoiding a given undesirable set are established. Then, the set reachability and set stability of BNs from the initial set to destination set avoiding an undesirable set are investigated, respectively. Furthermore, the set stabilization of BCNs from the initial set to destination set avoiding a given undesirable set are investigated. Finally, a design method for finding the time optimal set stabilizer is proposed, and an example is provided to illustrate the effectiveness of the results.

Based on the principle of energy variation, a calculation model for the free vibration characteristics of a cylindrical shell with a finite submerged depth considering the influence of the free liquid surface is established in this paper. First, the Euler beam function is used instead of the shell axial displacement function to obtain the shell kinetic energy and potential energy. Then, by using the mirror image method, the analytical expression of the fluid velocity potential considering the free surface is obtained, and the flow field is added to the system energy functional in the form of fluid work. Then the energy functional is changed to obtain the shell–liquid coupled vibration equation. Solving the equation can obtain the natural frequencies and modes of the structure. The comparison with the finite element calculation results verifies the accuracy of the calculation model in this paper. The research on the influence of the free liquid surface shows that compared to the infinite domain, the free liquid surface destroys the symmetry of the entire system, resulting in a difference in the natural frequency of the positive and negative modes of the shell, and the circumferential mode shapes are no longer mutually uncoupled trigonometric functions. The existence of free liquid surface will also increase the natural frequency of the same order mode, and the closer to the free surface, the natural frequency is greater. As the immersion depth increases, the free vibration characteristics will quickly tend to the result of infinite domain. Additionally, when the immersion depth is equal to or greater than four times the radius of the shell structure, it can be considered that the free liquid surface has no effect. These law and phenomena have also been explained from the mechanism. The method in this paper provides a new analytical solution pattern for solving this type of problem.

This paper is devoted to further strengthening, in the current asymmetric information environment, the informed level of operators about network performance. Specifically, in view of the burst and perishability of a packet loss event, to better meet the real-time requirements of current high-speed backbone performance monitoring, a model for Packet Loss Measurement at the access network boundary Based on Sampled Flow (PLMBSF) is presented in this paper under the premise of both cost and real-time. The model overcomes problems such as the inability of previous estimation to distinguish between packet losses before and after the monitoring point, deployment difficulties and cooperative operation consistency. Drawing support from the Mathis equation and regression analysis, the measurement for packet losses before and after the monitoring point can be realized when using only the sampled flows generated by the access network boundary equipment. The comparison results with the trace-based passive packet loss measurement show that although the proposed model is easily affected by factors such as flow length, loss rate, sampling rate, the overall accuracy is still within the acceptable range. In addition, the proposed model PLMBSF, compared with the trace-based loss measurement is only different in the input data granularity. Therefore, PLMBSF and its advantages are also applicable to aggregated traffic.

Recently in the paper [Mediterr. J. Math.&nbsp, 2016, 13, 1535–1553], the authors introduced and studied a new operator which was defined as a convolution of the three popular linear operators, namely the Sǎlǎgean operator, the Ruscheweyh operator and a fractional derivative operator. In the present paper, we consider an operator which is a convolution operator of only two linear operators (with lesser restricted parameters) that yield various well-known operators, defined by a symmetric way, including the one studied in the above-mentioned paper. Several results on the subordination of analytic functions to this operator (defined below) are investigated. Some of the results presented are shown to involve the familiar Appell function and Hurwitz–Lerch Zeta function. Special cases and interesting consequences being in symmetry of our main results are also mentioned.

Background: Some medical and technological tasks lead to the geometrical problem of how to cover the unit circle as much as possible by n congruent circles of given radius r, while r varies from the radius in the maximum packing to the radius in the minimum covering. Proven or conjectural solutions to this partial covering problem are known only for n = 2 to 5. In the present paper, numerical solutions are given to this problem for n = 6 and 7. Method: The method used transforms the geometrical problem to a mechanical one, where the solution to the geometrical problem is obtained by finding the self-stress positions of a generalised tensegrity structure. This method was developed by the authors and was published in an earlier publication. Results: The method applied results in locally optimal circle arrangements. The numerical data for the special circle arrangements are presented in a tabular form, and in drawings of the arrangements. Conclusion: It was found that the case of n = 6 is very complicated, whilst the case n = 7 is very simple. It is shown in this paper that locally optimal arrangements may exhibit different types of symmetry, and equilibrium paths may bifurcate.

In this paper, the mixed performance and reachable set of uncertain discrete systems with slow variation interval time-varying delay are considered. The original uncertain discrete systems with interval time-varying delay are first transformed into a switched system. Then, the proposed improved results are used to guarantee the stability and reachable set of the uncertain system with slow variation interval time-varying delay. The mixed performance (H2/H∞) can be derived in the same formulation simultaneously. The design scheme of robust switched control is also developed in this paper. The gains of the controller can be designed and switched to achieve stabilization and mixed performance of the system according to the delay value. Some comparisons with published results are made to show the main contribution of the proposed approach. Finally, some numerical examples are illustrated to show the main results.

Helicopters are extraordinarily complex mechanisms. Such complexity makes it difficult to model, simulate and pilot a helicopter. The present paper proposes a mathematical model of a fantail helicopter type based on Lie-group theory. The present paper first recalls the Lagrange–d’Alembert–Pontryagin principle to describe the dynamics of a multi-part object, and subsequently applies such principle to describe the motion of a helicopter in space. A good part of the paper is devoted to the numerical simulation of the motion of a helicopter, which was obtained through a dedicated numerical method. Numerical simulation was based on a series of values for the many parameters involved in the mathematical model carefully inferred from the available technical literature.

The sum of Big Data generated from different sources is increasing significantly with each passing day to extent that it is becoming challenging for traditional storage methods to store this massive amount of data. For this reason, most organizations have resolved to use third-party cloud storage to store data. Cloud storage has advanced in recent times, but it still faces numerous challenges with regard to security and privacy. This paper discusses Big Data security and privacy challenges and the minimum requirements that must be provided by future solutions. The main objective of this paper is to propose a new technical framework to control and manage Big Data security and privacy risks. A design science research methodology is used to carry out this project. The proposed framework takes advantage of Blockchain technology to provide secure storage of Big Data by managing its metadata and policies and eliminating external parties to maintain data security and privacy. Additionally, it uses mobile agent technology to take advantage of the benefits related to system performance in general. We present a prototype implementation for our proposed framework using the Ethereum Blockchain in a real data storage scenario. The empirical results and framework evaluation show that our proposed framework provides an effective solution for secure data storage in a Big Data environment.

The processing of a sparse matrix is a hot topic in the recommendation system. This paper applies the method of hesitant fuzzy set to study the sparse matrix processing problem. Based on the uncertain factors in the recommendation process, this paper applies hesitant fuzzy set theory to characterize the historical ratings embedded in the recommendation system and studies the data processing problem of the sparse matrix under the condition of a hesitant fuzzy set. The key is to transform the similarity problem of products in the sparse matrix into the similarity problem of two hesitant fuzzy sets by data conversion, data processing, and data complement. This paper further considers the influence of the difference of user ratings on the recommendation results and obtains a user’s recommendation list. On the one hand, the proposed method effectively solves the matrix in the recommendation system, on the other hand, it provides a feasible method for calculating similarity in the recommendation system.

The paper offers a general symbolic method to study the motion in a non-inertial reference frame. In order to achieve this, we use the algebraic and geometric properties of the Lie group of special orthogonal tensors, SO3, and the Lie group of the rigid body displacements, SE3. We obtain a simplified form of the initial value problem that models the non-inertial motion using a tensor instrument introduced in this paper. Thus, the study of the motion in a non-inertial reference frame is transferred into the study of a classical motion in an inertial reference frame. The applications of this method refer to solving the relative motion problem and deriving the straightforward solution to classical theoretical mechanics problems. The motion in a uniform gravitational force field in a rotating reference frame, the motion of a charged particle in non-stationary electric and magnetic fields, the exact solution of the relative rigid body motion in the non-inertial reference frame are studied. Using this symbolic method in studying the motion in a non-inertial reference frame reduces the number of computations. In addition, it offers, in some essential particular cases, exact closed-form coordinate-free analytical solutions.

Starting with the interactive relationship between electronic money and household consumption stimuli, this paper deeply analyzes the changes in the behavior of each monetary subject under the impact of electronic money, and establishes a DSGE model based on the three economic sectors of family, commercial bank and central bank under the New Keynesian framework. On this basis, the impact of electronic money on savings, loans, output and the interest rate, and its impact on monetary policy, are described by numerical simulation. The simulation results show that: (1) electronic money has asymmetric effects on savings and loans, but an irrational deviation on households, (2) the influence of electronic money on the interest rate has a reverse effect, and the “inverse adjustment” of the interest rate increases the management difficulty of the micro subject to a certain extent, and affects the effectiveness of monetary policy, (3) the regulatory effect of price monetary policy is better than that of quantitative monetary policy, and electronic money has the effect of its risk restraining impact. Finally, based on the analysis, this paper gives policy recommendations.

The present paper continues the study on the relatively new concept of fuzzy differential subordination conducted in some recently published cited papers. In this article, certain fuzzy subordination results for analytical functions involving the Atangana–Baleanu fractional integral of Bessel functions are presented. Theorems giving the best dominants for some fuzzy differential subordinations are proved, and interesting corollaries are provided with the use of particular functions as fuzzy best dominants.

This paper is related to notions adapted from fuzzy set theory to the field of complex analysis, namely fuzzy differential subordinations. Using the ideas specific to geometric function theory from the field of complex analysis, fuzzy differential subordination results are obtained using a new integral operator introduced in this paper using the well-known confluent hypergeometric function, also known as the Kummer hypergeometric function. The new hypergeometric integral operator is defined by choosing particular parameters, having as inspiration the operator studied by Miller, Mocanu and Reade in 1978. Theorems are stated and proved, which give corollary conditions such that the newly-defined integral operator is starlike, convex and close-to-convex, respectively. The example given at the end of the paper proves the applicability of the obtained results.

The main purpose of this paper is threefold. One is to study the existence and convergence problem of solutions for a class of generalized mixed quasi-variational hemivariational inequalities. The second one is to study the existence of optimal control for such kind of generalized mixed quasi-variational hemivariational inequalities under given control u∈U. The third one is to study the relationship between the optimal control and the data for the underlying generalized mixed quasi-variational inequality problems and a class of minimization problem. As an application, we utilize our results to study the elastic frictional problem in a class of Hilbert spaces. The results presented in the paper extend and improve upon some recent results.

In this paper, we establish some new Hermite–Hadamard type inequalities for preinvex functions and left-right estimates of newly established inequalities for p,q-differentiable preinvex functions in the context of p,q-calculus. We also show that the results established in this paper are generalizations of comparable results in the literature of integral inequalities. Analytic inequalities of this nature and especially the techniques involved have applications in various areas in which symmetry plays a prominent role.

This paper deals with the problem of managing the risks of complex systems under targeted attacks. It is usually solved by using Defender–Attacker models or similar ones. However, such models do not consider the influence of the defending system structure on the expected attack outcome. Our goal was to study how the structure of an abstract system affects its integral risk. To achieve this, we considered a situation where the Defender knows the structure of the expected attack and can arrange the elements to achieve a minimum of integral risk. In this paper, we consider a particular case of a simple chain attack structure. We generalized the concept of a local risk function to account for structural effects and found an ordering criterion that ensures the optimal placement of the defending system’s elements inside a given simple chain structure. The obtained result is the first step to formulate the principles of optimally placing system elements within an arbitrarily complex network. Knowledge of these principles, in turn, will allow solving the problems of optimal allocation of resources to minimize the risks of a complex system, considering its structure.

Much applied research uses expert judgment as a primary or additional data source, thus the problem solved in this publication is relevant. Despite the expert’s experience and competence, the evaluation is subjective and has uncertainty in it. There are various reasons for this uncertainty, including the expert’s incomplete competence, the expert’s character and personal qualities, the expert’s attachment to the opinion of other experts, and the field of the task to be solved. This paper presents a new way to use the Bayesian method to reduce the uncertainty of an expert judgment by correcting the expert’s evaluation by the a posteriori mean function. The Bayesian method corrects the expert’s evaluation, taking into account the expert’s competence and accumulated long-term experience. Since the paper uses a continuous case of the Bayesian formula, perceived as a continuous approximation of experts’ evaluations, this is not only the novelty of this work, but also a new result in the theory of the Bayesian method and its application. The paper investigates various combinations of the probability density functions of a priori information and expert error. The results are illustrated by the example of the evaluation of distance learning courses.

The paper is devoted to the comparison of different one-dimensional models of blood flow. In such models, the non-Newtonian property of blood is considered. It is demonstrated that for the large arteries, the small parameter is observed in the models, and the perturbation method can be used for the analytical solution. In the paper, the simplified nonlinear problem for the semi-infinite vessel with constant properties is solved analytically, and the solutions for different models are compared. The effects of the flattening of the velocity profile and hematocrit value on the deviation from the Newtonian model are investigated.

Quality of life can be expressed as a highly subjective measure of happiness, which is an important part of many financial and non-financial decisions. The issue of quality of life, namely its quantification, is a current topic, evidenced by a number of literary sources in both foreign and domestic literature. The paper deals with this issue in the conditions of the Slovak Republic and studies the quality of life for each region of Slovakia with respect to the given indicators. In this paper, we deal with the use of the methods of multi-criteria analysis in evaluating the quality of life in Slovakia. The aim of this paper is to highlight that it is important to monitor the level of quality of life at the regional level and that one of the indicators influencing the quality of life in the region may be its location in relation to neighboring countries.

The research paper is devoted to developing a mathematical approach for dealing with time-varying parameters in rolling window logit models for credit risk assessment. Forecasting coefficients yields a better model accuracy than a trivial approach of using computed past statistics parameters for the next time period. In this paper, a new method of dealing with time-varying parameters of scoring models is proposed, which is aimed at computing the default probability of a borrower. It was empirically shown that in a continuously changing economic environment factors’ influence on a target variable is also changing. Therefore, forecasting coefficients yields a better financial result than simply applying parameters obtained by accumulated statistics over past time periods. The paper develops a new theoretical approach, incorporating a combination of the ARIMA class model, the DCC-GARCH model and the state–space model, which is more accurate, than using only the ARIMA model. Rigorous simulation testing is provided to confirm the efficiency of the proposed method.

The canonical skewness vector is an analytically simple function of the third-order, standardized moments of a random vector. Statistical applications of this skewness measure include semiparametric modeling, independent component analysis, model-based clustering, and multivariate normality testing. This paper investigates some properties of the canonical skewness vector with respect to representations, transformations, and norm. In particular, the paper shows its connections with tensor contraction, scalar measures of multivariate kurtosis and Mardia’s skewness, the best-known scalar measure of multivariate skewness. A simulation study empirically compares the powers of tests for multivariate normality based on the squared norm of the canonical skewness vector and on Mardia’s skewness. An example with financial data illustrates the statistical applications of the canonical skewness vector.

Clustering is a major field in data mining, which is also an important method of data partition or grouping. Clustering has now been applied in various ways to commerce, market analysis, biology, web classification, and so on. Clustering algorithms include the partitioning method, hierarchical clustering as well as density-based, grid-based, model-based, and fuzzy clustering. The K-means algorithm is one of the essential clustering algorithms. It is a kind of clustering algorithm based on the partitioning method. This study’s aim was to improve the algorithm based on research, while with regard to its application, the aim was to use the algorithm for customer segmentation. Customer segmentation is an essential element in the enterprise’s utilization of CRM. The first part of the paper presents an elaboration of the object of study, its background as well as the goal this article would like to achieve; it also discusses the research the mentality and the overall content. The second part mainly introduces the basic knowledge on clustering and methods for clustering analysis based on the assessment of different algorithms, while identifying its advantages and disadvantages through the comparison of those algorithms. The third part introduces the application of the algorithm, as the study applies clustering technology to customer segmentation. First, the customer value system is built through AHP; customer value is then quantified, and customers are divided into different classifications using clustering technology. The efficient CRM can thus be used according to the different customer classifications. Currently, there are some systems used to evaluate customer value, but none of them can be put into practice efficiently. In order to solve this problem, the concept of continuous symmetry is introduced. It is very important to detect the continuous symmetry of a given problem. It allows for the detection of an observable state whose components are nonlinear functions of the original unobservable state. Thus, we built an evaluating system for customer value, which is in line with the development of the enterprise, using the method of data mining, based on the practical situation of the enterprise and through a series of practical evaluating indexes for customer value. The evaluating system can be used to quantify customer value, to segment the customers, and to build a decision-supporting system for customer value management. The fourth part presents the cure, mainly an analysis of the typical k-means algorithm; this paper proposes two algorithms to improve the k-means algorithm. Improved algorithm A can get the K automatically and can ensure the achievement of the global optimum value to some degree. Improved Algorithm B, which combines the sample technology and the arrangement agglomeration algorithm, is much more efficient than the k-means algorithm. In conclusion, the main findings of the study and further research directions are presented.

The paper discusses several control techniques for a class of systems described by fractional order equations. The paper presents the unit frequency criteria that ensure the closed loop control for: Fractional Order Linear Systems, Fractional Order Linear Systems with nonlinear components, Time Delay Fractional Order Linear Systems, Time Delay Fractional Order Linear Systems with nonlinear components. The stability criterion is proposed for the systems composed of fractional order subsystems. These techniques are used in two applications: Soft Exoskeleton Glove Control, studied as a nonlinear model with time delay and Disabled Man-Wheelchair model, analysed as a fractional-order multi-system.

This article belongs to the Section Computer and Engineering Science and Symmetry/Asymmetry. Speech intelligibility is a crucial element in oral communication that can be influenced by multiple elements, such as noise, channel characteristics, or speech disorders. In this paper, we address the task of speech intelligibility classification (SIC) in this last circumstance. Taking our previous works, a SIC system based on an attentional long short-term memory (LSTM) network, as a starting point, we deal with the problem of the inadequate learning of the attention weights due to training data scarcity. For overcoming this issue, the main contribution of this paper is a novel type of weighted pooling (WP) mechanism, called saliency pooling where the WP weights are not automatically learned during the training process of the network, but are obtained from an external source of information, the Kalinli’s auditory saliency model. In this way, it is intended to take advantage of the apparent symmetry between the human auditory attention mechanism and the attentional models integrated into deep learning networks. The developed systems are assessed on the UA-speech dataset that comprises speech uttered by subjects with several dysarthria levels. Results show that all the systems with saliency pooling significantly outperform a reference support vector machine (SVM)-based system and LSTM-based systems with mean pooling and attention pooling, suggesting that Kalinli’s saliency can be successfully incorporated into the LSTM architecture as an external cue for the estimation of the speech intelligibility level. The work leading to these results has been supported by the Spanish Ministry of Economy, Industry and Competitiveness through TEC2017-84395-P (MINECO) and TEC2017-84593-C2-1-R (MINECO) projects (AEI/FEDER, UE), and the Universidad Carlos III de Madrid under Strategic Action 2018/00071/001.