Search

Passenger density is a major factor influencing indoor climate conditions and the corresponding energy consumption in the transfer halls of metro transportation hubs. In this study, passenger flow in a subway transfer hall in Beijing was measured across three typical seasons. A differential equation model was established to account for the characteristics of passenger density. Based on this, a passenger density prediction model was developed and utilized for analysis. The results show that passenger density is primarily affected by operation time and the surrounding population composition, with a relatively weak correlation to outdoor weather conditions. Additionally, passenger density differs significantly between weekdays and weekends, with the weekday peak being 2.5 times higher than that on weekends. During the four peak hours on weekdays, both in the morning and evening, passenger density exceeds the design capacity, resulting in insufficient fresh air supply. However, for most of the weekday hours and for all hours on weekends, passenger density remains below the design capacity. This indicates a substantial potential for energy savings by adjusting the fresh air supply according to actual passenger density. [ABSTRACT FROM AUTHOR]

The empty-space-induced depletion region in photoelectrodes severely exacerbates the recombination of electron–hole pairs, thereby reducing the photoelectrochemical (PEC) analytical performance. Herein, the chemical bond that can suppress the potential barrier and overcome the high energy barrier of out-of-plane Ohmic or Schottky contact is introduced into the PEC sensor to eliminate the depletion region and dramatically promote the separation of electron–hole pairs. Specifically, three-dimensional (3D) hierarchically wheatear-like TiO2 (HWT) nanostructures featuring a large surface area to absorb incident light are crafted as the substrate. The facile carbonized strategy is further employed to engineer the Ti-C chemical bond, serving as the touchstone. The average PL lifetime of HWT-C (4.14 ns) is much shorter than that of the 3D HWT (8.57 ns) due to the promoting effect of the chemically bonded structure on carrier separation. Consequently, the 3D HWT-C covalent photoelectrode (600 μA/cm2) exhibits a 3.6-fold increase in photocurrent density compared with the 3D HWT (167 μA/cm2). Ultimately, the model analyte of the tumor marker is detected, and the linear range is 0.02 ng/mL–100 ng/mL with a detection limitation of 0.007 ng/mL. This work provides a basic understanding of chemical bonds in tuning charge separation and insights on strategies for designing high-performance PEC sensors. [ABSTRACT FROM AUTHOR]

Simple Summary: Diluent plays an important role in sperm storage. The various components of the diluent provide nutrition for sperm survival, maintain the stability of the preserved environment, and prolong the survival time of sperm. However, for the preservation of semen at 4 °C, diluent formulations are currently lacking or existing diluent formulations are not sufficient. Therefore, the effect of four diluents on semen preservation was studied through an assessment of sperm motility and functional integrity. Diluent D (Tris–Fructose–Citric acid–Egg yolk) was found to greatly improve semen quality during storage at 4 °C. This study aimed to investigate the effects of various diluents on the quality of Hu ram sperm stored at 4 °C. Semen samples were collected from three Hu rams and diluted with diluents A (Sodium citrate–Glucose–Egg yolk), B (Sodium citrate–Glucose), C (Fructose–Skimmed milk powder–Soy lecithin), and D (Tris–Fructose–Citric acid–Egg yolk). Total motility (TM), straight-line velocity (VSL), average path velocity (VAP), curvilinear velocity (VCL), average motion degree (MAD), acrosome integrity, membrane integrity, and reactive oxygen species (ROS) were evaluated. The results showed that diluent D had better preservation in terms of the sperm TM, VSL, VCL, VAP, MAD, and membrane and acrosome integrity. On the third day of the storage, the sperm PM of diluent D was higher than that of other diluents (p < 0.05). The ROS level of diluent D was lower than that of other diluents on the fifth day (p < 0.05). On the seventh day of the storage, the sperm TM in diluent D reached 50%, which was the highest in all diluent groups. On the seventh day of the storage, the integrity of the sperm membrane and the integrity of the acrosome of the sperm in diluent D were the highest in all diluent groups (p < 0.05). In conclusion, these results indicated that diluent D improved the semen quality during storage at 4 °C. In this study, diluent D was the best diluent formula for Hu ram semen stored at 4 °C. [ABSTRACT FROM AUTHOR]

An integrated dual-signal bioassay was devised to fulfil thrombin (TB) ultrasensitive detection by integrating visualization with the photoelectrochemical technique based on G-quadruplex/hemin. During the process, branched sheet embedded copper-based oxides prepared with illumination and alkaline condition play a vital role in obtaining the desirable photocurrent. The switchover of photoelectrochemical signal was realized by the adjustable distance between electron acceptor G-quadruplex/hemin and interface materials due to dissociation of the Cu/Mn double-doped cerium dioxide (CuMn@CeO2)/DNA caused by the addition of TB. Then, CuMn@CeO2 transferred onto visual zones triggered catalytic reactions under the existence of 3,3′,5,5′-tetramethylbenzidine and hydrogen peroxide, making a variation in color recognized by the naked eye and providing visual prediction. Under optimized conditions, this bioassay protocol demonstrated wide linear ranges (0.0001–50 nM), high selectivity, stability, and reproducibility. More importantly, the proposed visual/photoelectrochemical transduction mechanism platform exhibits a lower background signal and more reliable detection results, which also offers an effective way for detecting other proteins and nucleic acids. [ABSTRACT FROM AUTHOR]

Herein, a paper-based glucose/air biofuel cell (BFC) was constructed and implemented for self-powered pesticide detection. Our developed paper-based chip relies on a hollow-channel to transport fluids rather than capillarity, which reduces analysis times as well as physical absorption. The gold nanoparticles (Au NPs) and carbon nanotubes (CNTs) were adapted to modify the paper fibers to fabricate the flexible conductive paper anode/cathode electrode (Au–PAE/CNT–PCE). Molecularly imprinted polymers (MIPs) using 2,4-dichlorophenoxyacetic acid (2,4-D) as a template were synthesized on Au–PAE for signal control. In the cathode, bilirubin oxidase (BOD) was used for the oxygen reduction reaction. Based on a competitive reaction between 2,4-D and glucose-oxidase-labeled 2,4-D (GOx-2,4-D), the amount of GOx immobilized on the bioanode can be simply tailored, thus a signal-off self-powered sensing platform was achieved for 2,4-D determination. Meanwhile, the coupling of the paper supercapacitor (PS) with the paper-based chip provides a simple route for signal amplification. Combined with a portable digital multi-meter detector, the amplified signal can be sensitively readout. Through rational design of the paper analytical device, the combination of BFC and PS provides a new prototype for constructing a low-cost, simple, portable, and sensitive self-powered biosensor lab-on-paper, which could be easily expanded in the field of clinical analysis and drug delivery. [ABSTRACT FROM AUTHOR]

Simple Summary: Sheep sperm is extremely sensitive to reactive oxygen species (ROS) and can produce a large amount of ROS during chilling storage, leading to a decline in semen quality. Adding antioxidants is an important method to improve semen quality. Chlorogenic acid (CGA) is a kind of plant extract with an antioxidant capacity, which can effectively eliminate free radicals and improve the antioxidant capacity of semen. However, its role in the chilling storage of Hu ram semen is not clear. Therefore, CGA with different concentrations was added to chilling storage extender to investigate its effect on chilled ram sperm. The results of this study revealed that CGA with proper concentration had a positive effect on chilled Hu ram sperm and 0.8 mg/mL CGA had the best effect. The purpose of this study was to investigate whether the addition of chlorogenic acid (CGA) to a sheep semen extender could improve the quality of chilled sheep sperm. Ejaculates (n = 80) were collected from five Hu rams with an artificial vagina. The ejaculates were mixed and divided into five equal parts, diluted with a CGA-free Tris–egg yolk extender (control), or supplemented with 0.2, 0.4, 0.8, and 1.2 mg/mL. The sperm kinematic parameters (viability, progressive motility), functional integrity of plasma membrane and acrosome, adenosine triphosphate (ATP) concentration and antioxidant parameters (Catalase (CAT), Superoxide dismutase (SOD) activity, total antioxidant capacity (T-AOC), ROS level and Malondialdehyde (MDA) content) were evaluated during storage of the semen. The results indicated that: PM, plasmatic membrane integrity and acrosomal integrity in 0.8 mg/mL CGA were higher (p < 0.05) from day 1 to 5. The ROS level in CGA groups was lower than the control (p < 0.05). CAT, SOD, ATP, and T-AOC were highest at 0.8 mg/mL concentration within 1 to 5 days. The above results indicated that the right concentration of CGA improved the quality of Hu ram sperm during chilling storage. [ABSTRACT FROM AUTHOR]

Simple Summary: Hu sheep sperm is highly susceptible to ROS during storage at room temperature. It is very important to use an antioxidant to ameliorate oxidative damage. Tau is an important amino acid peptide antioxidant with a wide range of biological effects. It can effectively scavenge free radicals, regulate reproductive function, improve immunity, and enhance its antioxidant capacity. However, the effects of Tau in the preservation of Hu sheep semen at room temperature are unclear. Therefore, Tau was added to Hu sheep semen preserved at room temperature to explore its effect on semen. The results showed that adding an appropriate concentration of Tau had a positive effect on Hu sheep semen preserved at room temperature; in particular, 20 mM Tau performed best. The present study aimed to investigate whether the presence of Tau protected Hu sheep sperm from ROS stress during storage at room temperature. The semen was diluted with extender (Tris-based) at room temperature, supplemented with different concentrations of Tau (0, 10, 20, 40, 80, or 100 mM), and stored at 15 °C. Sperm quality parameters (sperm progressive motility, kinetic parameters, plasma membrane integrity rate, acrosome integrity rate, and MMP) and antioxidant parameters (ROS, MDA, SOD, CAT, and T-AOC) were evaluated during the preservation of semen. The addition of Tau, especially at a concentration of 20 mM, exerted positive effects on sperm quality parameters and antioxidant parameters compared to the sperm without Tau treatment (control group). The addition of Tau, especially at a concentration of 100 mM, exerted negative effects on sperm quality parameters and antioxidant parameters compared to the control group. Interestingly, the results indicated that the sperm acrosome integrity rate did not change during storage time. In conclusion, the addition of Tau to sperm preserved at room temperature can enhance the antioxidant ability of sperm, reduce the LPO on the 5th day, and improve the quality of semen preserved at room temperature. These results implied that Tau had potential to enhance Hu sheep sperm reproductive performance. [ABSTRACT FROM AUTHOR]

Recent research showed that the chaotic maps are considered as alternative methods for generating pseudo-random numbers, and various approaches have been proposed for the corresponding hardware implementations. In this work, an efficient hardware pseudo-random number generator (PRNG) is proposed, where the one-dimensional logistic map is optimised by using the perturbation operation which effectively reduces the degradation of digital chaos. By employing stochastic computing, a hardware PRNG is designed with relatively low hardware utilisation. The proposed hardware PRNG is implemented by using a Field Programmable Gate Array device. Results show that the chaotic map achieves good security performance by using the perturbation operations and the generated pseudo-random numbers pass the TestU01 test and the NIST SP 800-22 test. Most importantly, it also saves 89% of hardware resources compared to conventional approaches. [ABSTRACT FROM AUTHOR]

Recent research showed that the chaotic maps are considered as alternative methods for generating pseudo-random numbers, and various approaches have been proposed for the corresponding hardware implementations. In this work, an efficient hardware pseudo-random number generator (PRNG) is proposed, where the one-dimensional logistic map is optimised by using the perturbation operation which effectively reduces the degradation of digital chaos. By employing stochastic computing, a hardware PRNG is designed with relatively low hardware utilisation. The proposed hardware PRNG is implemented by using a Field Programmable Gate Array device. Results show that the chaotic map achieves good security performance by using the perturbation operations and the generated pseudo-random numbers pass the TestU01 test and the NIST SP 800-22 test. Most importantly, it also saves 89% of hardware resources compared to conventional approaches.