Search

Advances in medium voltage direct current (MVDC) technologies and the penetration of extended MVDC systems are still significantly hindered by the lack of adequate direct current (DC) switching equipment. The fundamentally different fault current behavior in case of a DC fault, compared to faults in alternating current (AC) systems, with regard to the characteristics and development of fault currents and their interruption make dedicated test procedures necessary. One testing approach is the application of a power-electronic buck converter (PEBC) to simulate relevant stresses on DC switching equipment during a DC fault current interruption. Since the associated requirements, especially regarding current ratings of several kiloamperes, cannot be fulfilled by using a singular PEBC, a modularization becomes necessary. However, particularly in high-power applications, the interconnection of several PEBC modules poses significant challenges. In this article, a demonstrator PEBC-based high-power test circuit for the provision of relevant testing parameters is presented. The underlying challenges and respective solutions with regard to the interconnection of, in total, 120 individual PEBC modules are discussed. It can be shown that the harmonization of connection busbar inductances is the main contributor towards a stable and safe test circuit operation. [ABSTRACT FROM AUTHOR]

How dependent are European power systems and economies on natural gas? To answer this pressing question, we coupled a simulation model for assessing security of electricity supply and an economic optimization model. With this, we were able to analyze different reduction scenarios of the amount of gas utilized in the power sector. Our results show that reducing the amount of natural gas in the European power sector by up to 30% has a relatively moderate impact on the security of electricity supply. Restrictions of 40% or more result in substantially higher reductions in electricity demand shortfall and are associated with economic costs of more than EUR 77 billion. Furthermore, we demonstrate that a close coordination of gas distribution on a European level would be instrumental in mitigating negative economic consequences. Finally, it can be deduced that a coordinated delay of planned power plant shutdowns could effectively compensate for reduced gas volumes in the electricity sector. [ABSTRACT FROM AUTHOR]

Energy system integration enables raising operational synergies by coupling the energy infrastructures for electricity, methane, and hydrogen. However, this coupling reinforces the infrastructure interdependencies, increasing the need for integrated modeling of these infrastructures. To analyze the cost-efficient, sustainable, and secure dispatch of applied, large-scale energy infrastructures, an extensive and non-linear optimization problem needs to be solved. This paper introduces a nested decomposition approach with three stages. The method enables an integrated and full-year consideration of large-scale multi-energy systems in hourly resolution, taking into account physical laws of power flows in electricity and gas transmission systems as boundary conditions. For this purpose, a zooming technique successively reduces the temporal scope while first increasing the spatial and last the technical resolution. A use case proves the applicability of the presented approach to large-scale energy systems. To this end, the model is applied to an integrated European energy system model with a detailed focus on Germany in a challenging transport situation. The use case demonstrates the temporal, regional, and cross-sectoral interdependencies in the dispatch of integrated energy infrastructures and thus the benefits of the introduced approach. [ABSTRACT FROM AUTHOR]

In the field of sector integration, the expansion of district heating (DH) is traditionally discussed with regard to the efficient integration of renewable energy sources (RES) and excess heat. But does DH exclusively benefit from other sectors or does it offer advantages in return? So far, studies have investigated DH only as a closed system or determined intersectoral benefits in a highly aggregated approach. We use and expand an integrated generation and transmission expansion planning model to analyze how the flexibility of DH benefits the energy system and the power transmission grid in particular. First of all, the results confirm former investigations that show DH can be used for efficient RES integration. Total annual system cost can be decreased by expanding DH, due to low investment cost and added flexibility, especially from large-scale heat storage. The high short-term efficiency of heat storage—in combination with electric heating technologies—can be exploited to shift heat demand temporally and, using multiple distributed units, locally to solve electric grid congestion. Although it is unclear whether these results can be replicated in the real world, due to the aggregation and detail of the model, further research in this direction is justified. [ABSTRACT FROM AUTHOR]

Machine-learning diagnostic systems are widely used to detect abnormal conditions in electrical equipment. Training robust and accurate diagnostic systems is challenging because only small databases of abnormal-condition data are available. However, the performance of the diagnostic systems depends on the quantity and quality of the data. The training database can be augmented utilizing data augmentation techniques that generate synthetic data to improve diagnostic performance. However, existing data augmentation techniques are generic methods that do not include additional information in the synthetic data. In this paper, we develop a model-based data augmentation technique integrating computer-implementable electromechanical models. Synthetic normal- and abnormal-condition data are generated with an electromechanical model and a stochastic parameter value sampling method. The model-based data augmentation is showcased to detect an abnormal condition of a distribution transformer. First, the synthetic data are compared with the measurements to verify the synthetic data. Then, ML-based diagnostic systems are created using model-based data augmentation and are compared with state-of-the-art diagnostic systems. It is shown that using the model-based data augmentation results in an improved accuracy compared to state-of-the-art diagnostic systems. This holds especially true when only a small abnormal-condition database is available. [ABSTRACT FROM AUTHOR]

Electricity prices are the key instrument for coordinating electricity markets. For long-term market analyses, price determination based on fundamental unit commitment simulations is required. Within the European wholesale market, electricity prices result from a market clearing, which finds a welfare-optimal price–quantity tuple considering a coupling of multiple market areas with limited transmission capacity. With increasing exchange capacities in Europe, the precise modeling of the market coupling is required. Many market simulation models use multi-stage approaches with a separation of market coupling and price determination. In this paper, we analyze a new single-stage approach that combines both steps and theoretically and empirically demonstrate its precision by a backtest. For this purpose, we compare a simulated versus a historical electricity price distribution. Moreover, we explain the necessary adjustments for future regulatory developments of the European electricity market regarding flow-based market coupling and propose a concept for the application of future regulatory developments. We demonstrate further developments using a future scenario. [ABSTRACT FROM AUTHOR]

Local flexibility markets (LFMs) are a market-based concept to integrate distributed energy resources into congestion management. However, the activation of flexibility for storage-based flexibility changes the respective state of charge. Compensation in later points of time is needed to regain the original flexibility potential. Therefore, we propose a LFM bid formulation including both flexibility and compensation. Furthermore, flexibility market participation might lead to inc-dec-gaming, i.e., congestion-increasing behavior to maximize profits. However, this inc-dec-gaming might lead to electricity market schedule deviations if LFM offers are not activated. We propose a risk-averse modeling formulation considering the potential non-activation of LFM bids to provide a framework for the assessment of LFM participation comparing different approaches. Our exemplary case studies demonstrate the proposed LFM bid formulation and show the impact of LFM participation modeling on inc-dec-gaming and congestion management costs. [ABSTRACT FROM AUTHOR]

Offshore wind farms are increasingly built in the North Sea and the number of HVDC systems transmitting the wind power to shore increases as well. To connect offshore wind farms to adjacent AC transmission systems, onshore and offshore modular multilevel converters transform the transmitted power from AC to DC and vice versa. Additionally, modern wind farms mainly use wind turbines connected to the offshore point of common coupling via voltage source converters. However, converters and their control systems can cause unwanted interactions, referred to as converter-driven stability problems. The resulting instabilities can be predicted by applying an impedance-based analysis in the frequency domain. Considering that the converter models and system data are often confidential and cannot be exchanged in real systems, this paper proposes an enhanced impedance measurement method suitable for black-box applications to investigate the interactions. A frequency response analysis identifies coupling currents depending on the control system. The currents are subsequently added to the impedance models to achieve higher accuracy. The proposed method is applied to assess an offshore HVDC system's converter-driven stability, using impedance measurements of laboratory converters and a wind turbine converter controller replica. The results show that the onshore modular multilevel converter interacts with AC grids of moderate short-circuit ratios. However, no interactions are identified between the offshore converter and the connected wind farm. [ABSTRACT FROM AUTHOR]

Pathways leading to a carbon neutral future for the German energy system have to deal with the expected phase-out of coal-fired power generation, in addition to the shutdown of nuclear power plants and the rapid ramp-up of photovoltaics and wind power generation. An analysis of the expected impact on electricity market, security of supply, and system stability must consider the European context because of the strong coupling—both from an economic and a system operation point of view—through the cross-border power exchange of Germany with its neighbors. This analysis, complemented by options to improve the existing development plans, is the purpose of this paper. We propose a multilevel energy system modeling, including electricity market, network congestion management, and system stability, to identify challenges for the years 2023 and 2035. Out of the results, we would like to highlight the positive role of innovative combined heat and power (CHP) solutions securing power and heat supply, the importance of a network congestion management utilizing flexibility from sector coupling, and the essential network extension plans. Network congestion and reduced security margins will become the new normal. We conclude that future energy systems require expanded flexibilities in combination with forward planning of operation. [ABSTRACT FROM AUTHOR]

Publicly accessible, elaborated grid datasets, i.e., benchmark grids, are well suited to publish and compare methods or study results. Similarly, developing innovative tools and algorithms in the fields of grid planning and grid operation is based on grid datasets. Therefore, a general methodology to generate benchmark datasets and its voltage level dependent implementation is described in this paper. As a result, SimBench, a comprehensive dataset for the low, medium, high and extra-high voltage level, is presented. Besides grids that can be combined across several voltage levels, the dataset offers an added value by providing time series for a whole year as well as future scenarios. In this way, SimBench is applicable for many use cases and simplifies reproducing study results. As proof, different automated algorithms for grid planning are compared to show how to apply SimBench and make use of it as a simulation benchmark. [ABSTRACT FROM AUTHOR]