Search

Amidst an energy crisis stemming from increased energy costs and the looming threat of war, there has been a burgeoning interest in energy conservation and management worldwide. Industrial complexes constitute a significant portion of total energy consumption. Hence, reducing energy consumption in these complexes is imperative for energy preservation. Typically, factories within similar industries aggregate in industrial complexes and share similar energy utilities. However, they often fail to capitalize on this shared infrastructure efficiently. To address this issue, a network system employing a virtual utility plant has been proposed. This system enables proactive measures to counteract energy surplus or deficit through AI-based predictions, thereby maximizing energy efficiency. Nevertheless, deploying conventional server systems within factories poses considerable challenges. Therefore, leveraging edge devices, characterized by low power consumption, high efficiency, and minimal space requirements, proves highly advantageous. Consequently, this study focuses on constructing and employing data collection and AI systems to utilize edge devices as standalone systems in each factory. To optimize the AI system for low-performance edge devices, we employed the integration-learning AI modeling technique. Evaluation results demonstrate that the proposed system exhibits high stability and reliability. [ABSTRACT FROM AUTHOR]

Today, the use of information and communication technology is very important in making the internet of things (IoT) elements distributable around the earth. With the development of IoT topics, today unmanned aerial vehicles (UAV) are utilized as a platform for gathering data from various IoT devices located worldwide. Determining the number and optimal locations of drones can minimize energy consumption in this data-collection system in the IoT. Using a promising multi-objective optimization algorithm (MOA) can achieve this goal. In this research, a bio-inspired MOA, termed the multi-objective spotted hyena optimizer (MOSHO), is employed on the data-collection platform for a group of IoT devices in a geographical area. The results of this method have been compared with other evolutionary MOAs. The analysis of the results shows that the MOSHO has a noteworthy consequence on the process of optimal energy consumption in this system, in addition to a high convergence associated with better diversity and robustness. The results of this research can be used to identify the optimization parameters in this system. [ABSTRACT FROM AUTHOR]

This paper models and evaluates three FSA-based (Frame Slotted ALOHA) MAC (Medium Access Control) protocols, namely, FSA-ACK (FSA with ACKnowledgements), FSA-FBP (FSA with FeedBack Packets) and DFSA (Dynamic FSA). The protocols are modeled using an AMC (Absorbing Markov Chain), which allows to derive analytic expressions for the average packet delay, as well as the energy consumption of both the network coordinator and the end-devices. The results, based on computer simulations, show that the analytic model is accurate and outline the benefits of DFSA. In terms of delay, DFSA provides a reduction of 17% (FSA-FBP) and 32% (FSA-ACK), whereas in terms of energy consumption DFSA provides savings of 23% (FSA-FBP) and 28% (FSA-ACK) for the coordinator and savings of 50% (FSA-FBP) and 24% (FSA-ACK) for end-devices. Finally, the paper provides insights on how to configure each FSA variant depending on the network parameters, i.e., depending on the number of end-devices, to minimize delay and energy expenditure. This is specially interesting for massive data collection in IoT (Internet-of-Things) scenarios, which typically rely on FSA-based protocols and where the operation has to be optimized to support a large number of devices with stringent energy consumption requirements. [ABSTRACT FROM AUTHOR]

Multi-hop data collection in wireless sensor networks (WSNs) is a challenge issue due to the limited energy resource and transmission range of wireless sensors. The hybrid clustering and routing (HCR) strategy has provided an effective solution, which can generate a connected and efficient cluster-based topology for multi-hop data collection in WSNs. However, it suffers from imbalanced energy consumption, which results in the poor performance of the network lifetime. In this paper, we evaluate the energy consumption of HCR and discover an important result: the imbalanced energy consumption generally appears in gradient k = 1, i.e., the nodes that can communicate with the sink directly. Based on this observation, we propose a new protocol called HCR-1, which includes the adaptive relay selection and tunable cost functions to balance the energy consumption. The guideline of setting the parameters in HCR-1 is provided based on simulations. The analytical and numerical results prove that, with minor modification of the topology in gradient k = 1, the HCR-1 protocol effectively balances the energy consumption and prolongs the network lifetime. [ABSTRACT FROM AUTHOR]

We propose a stable backbone tree construction algorithm using multi-hop clusters for wireless sensor networks (WSNs). The hierarchical cluster structure has advantages in data fusion and aggregation. Energy consumption can be decreased by managing nodes with cluster heads. Backbone nodes, which are responsible for performing and managing multi-hop communication, can reduce the communication overhead such as control traffic and minimize the number of active nodes. Previous backbone construction algorithms, such as Hierarchical Cluster-based Data Dissemination (HCDD) and Multicluster, Mobile, Multimedia radio network (MMM), consume energy quickly. They are designed without regard to appropriate factors such as residual energy and degree (the number of connections or edges to other nodes) of a node for WSNs. Thus, the network is quickly disconnected or has to reconstruct a backbone. We propose a distributed algorithm to create a stable backbone by selecting the nodes with higher energy or degree as the cluster heads. This increases the overall network lifetime. Moreover, the proposed method balances energy consumption by distributing the traffic load among nodes around the cluster head. In the simulation, the proposed scheme outperforms previous clustering schemes in terms of the average and the standard deviation of residual energy or degree of backbone nodes, the average residual energy of backbone nodes after disseminating the sensed data, and the network lifetime. [ABSTRACT FROM AUTHOR]

With the growing interest in big data technology, mobile IoT devices play an essential role in data collection. Generally, IoT sensor nodes are randomly distributed to areas where data cannot be easily collected. Subsequently, when data collection is impossible (i.e., sensing holes occurrence situation) due to improper placement of sensors or energy exhaustion of sensors, the sensors should be relocated. The cluster header in the sensing hole sends requests to neighboring cluster headers for the sensors to be relocated. However, it can be possible that sensors in the specific cluster zones near the sensing hole are continuously requested to move. With this knowledge, there can be a ping-pong problem, where the cluster headers in the neighboring sensing holes repeatedly request the movement of the sensors in the counterpart sensing hole. In this paper, we first proposed the near-uniform selection and movement scheme of the sensors to be relocated. By this scheme, the energy consumption of the sensors can be equalized, and the sensing capability can be extended. Thus the network lifetime can be extended. Next, the proposed relocation protocol resolves a ping-pong problem using queues with request scheduling. Another crucial contribution of this paper is that performance was analyzed using the fully-customed OMNeT++ simulator to reflect actual environmental conditions, not under over-simplified artificial network conditions. The proposed relocation protocol demonstrates a uniform and energy-efficient movement with ping-pong free capability. [ABSTRACT FROM AUTHOR]

In the traditional agricultural wireless sensor networks (WSNs), there is a large amount of redundant data and high latency on critical events (CEs) for data collection systems, which increases the time and energy consumption. In order to overcome these problems, an effective edge computing (EC) enabled data collection approach for CE in smart agriculture is proposed. First, the key features data types (KFDTs) are extracted from the historical dataset to keep the main information on CEs. Next, the KFDTs are selected as the collection data type of the software-defined wireless sensor network (SDWSN). Then, the event types are decided by searching the minimum average variance between the sensing data of active nodes and the average value of the key feature data obtained by EC. Furthermore, the sensing nodes are driven to sense the event-related data with a consideration of latency constraints by the SDWSN servers. A real-world testbed was set up in a smart greenhouse for experimental verification of the proposed approach. The results showed that the proposed approach could reduce the number of needed sensors, sensing time, collection data volume, communication time, and provide the low latency agricultural data collection system. Thus, the proposed approach can improve the efficiency of CE sensing in smart agriculture. [ABSTRACT FROM AUTHOR]

Wireless sensor networks (WSNs) and unmanned aerial vehicles (UAVs) have been used for monitoring animals but when their habitats have difficult access and are areas of a large expanse, remote monitoring by classic techniques becomes a difficult task. The use of traditional WSNs requires a restrictive number of hops in a multi-hoping routing scheme, traveling long distances to the sink node where data is stored by nodes and UAVs are used to collect data by visiting each node. However, the use of UAVs is not straightforward since the energy balance between the WSN and UAV has to be carefully calibrated. Building on this, we propose two data collection schemes in clustered based WSNs: (1) WSN oriented and (2) UAV oriented. In the former, nodes within each cluster member (CM), send information to their cluster head (CH) and for recollection, the UAV visits all CHs. As the UAV visits many CHs the flight time is increased. In the latter, all CHs send data from their CMs to a sink node, hence, the UAV only visits this node, reducing the flying time but with a higher system energy cost. To find the most suitable scheme for different monitoring conditions in terms of the average energy consumption and the buffer capacity of the system, we develop a mathematical model that considers both the dynamics of the WSN along with the UAV. [ABSTRACT FROM AUTHOR]

This paper proposes a charging-aware multi-mode routing protocol (CMRP) to collect data in the wireless rechargeable sensor networks. The routing mechanism in CMRP is not steady but changes according to the energy charging status of sensors. Sensors that cannot replenish their energy efficiency use the routing protocol with less energy consumption. On the contrary, sensors that can replenish their energy use the low propagation delay routing protocol. A novel heuristic chaining mechanism based on multi-level convex hull circle (MCC) is also proposed. Simulation results show that CMRP not only has longer operation time than LEACH and PEGASIS but also has the shortest propagation delay time. The lifetime of CMRP is less than the minimum spanning tree by about 1%, but the propagation delay is shorter than MSTP about 21–28%. In addition, CMRP considers both reducing energy consumption and shortening the propagation delay at the same time. The life-delay rate of the CMRP is close to the optimal results. [ABSTRACT FROM AUTHOR]