Search

In this paper, the influence of calcium on coal gangue and fly ash geopolymer is explored, and the problem of low utilization of unburned coal gangue is analyzed and solved. The experiment took uncalcined coal gangue and fly ash as raw materials, and a regression model was developed with the response surface methodology. The independent variables were the CG content, alkali activator concentration, and Ca(OH)2 to NaOH ratio (CH/SH). The response target value was the coal gangue and fly-ash geopolymer compressive strength. The compressive strength tests and the regression model obtained by the response surface methodology showed that the coal gangue and fly ash geopolymer prepared with the content of uncalcined coal gangue is 30%, alkali activator content of 15%, and the value of CH/SH is 1.727 had a dense structure and better performance. The microscopic results demonstrated that the uncalcined coal gangue structure is destroyed under an alkali activator's action, and a dense microstructure is formed based on C(N)-A-S-H and C-S-H gel, which provides a reasonable basis for the preparation of geopolymers from the uncalcined coal gangue. [ABSTRACT FROM AUTHOR]

Due to the unique adsorption and desorption characteristics of coal, coal reservoir permeability changes dynamically during coalbed methane (CBM) development. Coal reservoirs can be classified using a permeability dynamic characterization in different production stages. In the single-phase water flow stage, four demarcating pressures are defined based on the damage from the effective stress on reservoir permeability. Coal reservoirs are classified into vulnerable, alleviative, and invulnerable reservoirs. In the gas desorption stage, two demarcating pressures are used to quantitatively characterize the recovery properties of permeability based on the recovery effect of the matrix shrinkage on permeability, namely the rebound pressure (the pressure corresponding to the lowest permeability) and recovery pressure (the pressure when permeability returns to initial permeability). Coal reservoirs are further classified into recoverable and unrecoverable reservoirs. The physical properties and influencing factors of these demarcating pressures are analyzed. Twenty-six wells from the Shizhuangnan Block in the southern Qinshui Basin of China were examined as a case study, showing that there is a significant correspondence between coal reservoir types and CBM well gas production. This study is helpful for identifying geological conditions of coal reservoirs as well as the productivity potential of CBM wells. [ABSTRACT FROM AUTHOR]