Search

The objective of this paper is the definition of a methodology to evaluate the impact of the temporal resolution of rainfall measurements in urban drainage modelling applications. More specifically the effect of the temporal resolution on urban water quality modelling is detected analysing the uncertainty of the response of rainfall-runoff modelling. Analyses have been carried out using historical rainfall-discharge data collected for the Fossolo catchment (Bologna, Italy). According to the methodology, the historical rainfall data are taken as a reference, and resampled data have been obtained through a rescaling procedure with variable temporal windows. The shape comparison between 'true' and rescaled rainfall data has been carried out using a non-dimensional accuracy index. Monte Carlo simulations have been carried out applying a parsimonious urban water quality model, using the recorded data and the resampled events. The results of the simulations were used to derive the cumulative probabilities of quantity and quality model outputs (peak discharges, flow volume, peak concentrations and pollutant mass) conditioned on the observation according to the GLUE (Generalized Likelihood Uncertainty Estimation) methodology. The results showed that when coarser rainfall information is available, the model calibration process is still efficient even if modelling uncertainty progressively increases especially with regards to water quality aspects. [ABSTRACT FROM AUTHOR]

Over the last decade new technologies are emerging even more for wastewater treatment. Among the new technologies, a recent possible solution regards Moving Bed Biofilm Reactors (MBBRs) that represent an effective alternative to conventional processes. More specifically such systems consist in the introduction of plastic elements inside the aerobic reactor as carrier material for the growth of attached biomass. Recently, one of the mostly used alternatives is to couple the Moving Bed Biofilm Reactor (MBBR) process with the conventional activated sludge process, and the resulting process is usually called HMBBR (Hybrid MBBR). In the MBBR process the biofilm grows attached on small plastic elements that are kept in constant motion throughout the entire volume of the reactor. Indeed, in such a system, a competition between the two biomasses, suspended and attached, can arise for the availability of the substrates, leading, as a consequence, to a modification in the biokinetic parameters of the two biomasses, compared to that of a pure suspended or attached biomass process. This paper presents the first results of a study aimed at estimating the kinetic heterotrophic constants in a HMBBR pilot plant using respirometric techniques. The pilot plant was built at the Acqua dei Corsari (Palermo) wastewater treatment plant and consisted of two parallel lines realized in a pre-anoxic scheme, in one of which the carrier material was added to the aerobic reactor with a filling ratio of 30%. [ABSTRACT FROM AUTHOR]

In the past, emission standard indicators have been adopted by environmental regulation authorities in order to preserve the quality of a receiving water body. Such indicators are based on the frequency or magnitude of a polluted discharge that may be continuous or intermittent. In order to properly maintain the quality of receiving waters, the Water Framework Directive, following the basic ideas of British Urban Pollution Manual, has been established. The Directive has overtaken the emission-standard concept, substituting it with the stream-standard concept that fixes discharge limits for each polluting substance depending on the self-depurative characteristics of receiving waters. Stream-standard assessment requires the deployment of measurement campaigns that can be very expensive; furthermore, the measurement campaigns are usually not able to provide a link between the receiving water quality and the polluting sources. Therefore, it would be very useful to find a correlation between the quality status of the natural waters and the emission-based indicators. Thus, this study is aimed to finding a possible connection between the receiving water quality indicators drawn by environmental regulation authorities and emission-based indicators while considering both continuous (i.e. from the wastewater treatment plants) and intermittent pollution discharges (mainly from combined sewer overflows). Such research has been carried out by means of long-term analysis adopting a holistic modelling approach. The different parts of the integrated urban drainage system were modelled by a parsimonious integrated model. The analysis was applied to an ephemeral river bounding Bologna (Italy). The study concluded that the correlation between receiving water quality and polluting emissions cannot be generally stated. Nevertheless, specific analyses on polluting emissions were pointed out in the study highlighting cause-effect link between polluting sources and receiving water quality. [ABSTRACT FROM AUTHOR]

The paper presents the comparison between the traditional activated sludge system (AS) and a hybrid moving bed biofilm reactor (HMBBR). In particular, an experimental campaign has been carried out at the WWTP in Palermo (Italy), on a pilot plant consisting of two pre-anoxic schemes. The aerated tank of the HMBBR line was filled with suspended carriers (AnoxKaldnes® K1), with a 30% filling ratio. The hydraulic load of the HMBBR line was increased up to two times the AS one. Further, in order to distinguish the additional contribution of the attached biomass for the HMBBR system, in the two lines the Mixed Liquor Suspended Solids (MLSS) was maintained as equal as possible. The monitoring period lasted three months during which several parameters were monitored. The obtained results showed a good treatment ability of the HMBBR system, referring to the organic matter removal as well as to the ammonium removal. In particular, in spite of the increase of the hydraulic load for the HMBBR line, the two systems showed a similar performance in terms of both organic and nitrogen removal. The results demonstrate the higher treatment capacity of the HMBBR addressing such system as an effective technology for the upgrading of overloaded wastewater treatment plants. [ABSTRACT FROM AUTHOR]

Water quality modelling is of crucial importance for the assessment of physical, chemical, and biological changes in water bodies. Mathematical approaches to water modelling have become more prevalent over recent years. Different model types ranging from detailed physical models to simplified conceptual models are available. Actually, a possible middle ground between detailed and simplified models may be parsimonious models that represent the simplest approach that fits the application. The appropriate modelling approach depends on the research goal as well as on data available for correct model application. When there is inadequate data, it is mandatory to focus on a simple river water quality model rather than detailed ones. The study presents a parsimonious river water quality model to evaluate the propagation of pollutants in natural rivers. The model is made up of two sub-models: a quantity one and a quality one. The model employs a river schematisation that considers different stretches according to the geometric characteristics and to the gradient of the river bed. Each stretch is represented with a conceptual model of a series of linear channels and reservoirs. The channels determine the delay in the pollution wave and the reservoirs cause its dispersion. To assess the river water quality, the model employs four state variables: DO, BOD, NH4, and NO. The model was applied to the Savena River (Italy), which is the focus of a European-financed project in which quantity and quality data were gathered. A sensitivity analysis of the model output to the model input or parameters was done based on the Generalised Likelihood Uncertainty Estimation methodology. The results demonstrate the suitability of such a model as a tool for river water quality management. [ABSTRACT FROM AUTHOR]

In this study, diffuse and point source pollutant loads were evaluated using an Italian case study: the Nocella catchment, which has been subject to extensive monitoring. The Nocella catchment is located in Sicily (Italy) and has an area of about 60km2. The river receives wastewater and stormwater from two urban areas drained by combined sewers. The two sewer systems, two wastewater treatment plants and a river reach were monitored during both dry and wet weather periods. Thereafter, an integrated catchment-scale model was applied to simulate point pollutant sources, i.e., pollution coming from the urban drainage system, and nonpoint pollutant sources, i.e., pollution coming from agricultural and wildlife activities. Different models were combined and long-term simulations were carried out in order to reconstruct the total pollutant loads discharged into the receiving water body and identify the roles of the different pollutant sources. This study demonstrates the complexity of water quality assessment in partially urbanised natural basins where neither point nor nonpoint sources can be neglected. Point sources are mainly responsible for acute oxygen demanding polluting impact during wet weather periods, and both point and nonpoint sources are responsible for the impact of nutrients on the receiving water body. [ABSTRACT FROM AUTHOR]