Search

Land-reflected signals from a geosynchronous communication satellite broadcasting in P-band (367.5 MHz) were captured in low Earth orbit (LEO) using a simple dipole antenna. A delay-Doppler map (DDM) was generated through autocorrelation. Estimates of the specular point delay were obtained from the lag of the second peak in the DDM with a bias of 239.4 m and a standard deviation of 44 m (12 m over a frozen lake) with respect to a predicted orbit model. Relative magnitudes of the first and second DDM peaks fell within the range of values predicted using dielectric models for the frozen ground and lake. Finally, retrievals of surface reflection coefficient were generated using a range of realistic values for the transmitter link budget $G/T$ , and these also fell within the range of possible values for the antenna gain pattern. Given the lack of calibration and the large uncertainties in the receiver orbit and attitude, this agreement is sufficient to conclude a successful demonstration of the fundamental principle of single-antenna reflectometry in P-band. P-band reflectometry may offer a new approach to remote sensing of sub-canopy and root-zone soil moisture. [ABSTRACT FROM AUTHOR]

We present BitConduite, a visual analytics approach for explorative analysis of financial activity within the Bitcoin network, offering a view on transactions aggregated by entities, i.e., by individuals, companies, or other groups actively using Bitcoin. BitConduite makes Bitcoin data accessible to nontechnical experts through a guided workflow around entities analyzed according to several activity metrics. Analyses can be conducted at different scales, from large groups of entities down to single entities. BitConduite also enables analysts to cluster entities to identify groups of similar activities as well as to explore characteristics and temporal patterns of transactions. To assess the value of our approach, we collected feedback from domain experts. [ABSTRACT FROM AUTHOR]

A primary objective of a distributed storage system is to reliably store huge amounts of source data for long periods of time using a large number of high storage capacity nodes. Storage nodes are prone to permanent failures, where such node failures cause all stored data to be permanently lost, and failed nodes are replaced with nodes that initially store no data. To maintain recoverability of the source data as storage nodes fail and are replaced, a total amount of storage capacity that is larger than the source data size is allocated to store the source data, and a repairer continually reads data from and writes data to the storage nodes as they fail and are replaced. We prove information-theoretic lower bounds on the rate at which a repairer reads data from the storage system as a function of the rate at which nodes fail and the amount by which the allocated storage capacity exceeds the source data size. These lower bounds hold for any repairer, i.e., any repairer that does not read data at or above the lower bound rate will provably not maintain recoverability of the source data. The bounds are provably tight asymptotically as the number of storage nodes grows and the allocated storage capacity approaches the source data size. [ABSTRACT FROM AUTHOR]

We present novel waveguide writing concepts in bulk PMMA. The writing relies on laser induced modification tracks that are completely surrounding a waveguide core. We found the optimal parameters to construct highly reproducible, single-mode waveguides with minimal propagation losses down to 0.6 dB  cm−1. Employing the best geometry, we demonstrate 2D and 3D Y-splitters that are the building blocks for creating complex optical networks such as sensors or lab-on-chip devices in polymer materials. [ABSTRACT FROM AUTHOR]

The charging/discharging delays in superconducting coils wound without insulation (NI coils) are a major drawback of the technique. While removing the insulation improves safety margins, the increase in the characteristic time constant τc can make a coil unfit for a particular purpose. It is widely accepted for instance that NI coils will not be used in ac applications where τc ~ 1/f. To decrease τc of the NI coils, the same length of superconductor can be wound/connected in parallel rather than in series — decreasing the inductance L, and hence the time constant τc, while maintaining the number of amp-turns IopN. Here we investigate the effect of parallel connecting coils in a magnet using a 2D axially symmetric model which captures all the necessary electromagnetic properties of the HTS NI coils. These properties include: critical current anisotropy Jc(B,θ), turn-to-turn conductivity, as well as winding parallelism. Our modeling results show that the parallel connected magnet experiences magnet-wide shielding current effects. Whilst these shielding currents affect field homogeneity — the model enables this effect to be quantified. Furthermore, shielding currents are not an issue when running NI coils in saturated mode. The modeling work presented here provides a simple initial example of how magnet designers may approach designing, optimizing, and operating high current, HTS NI coils. [ABSTRACT FROM AUTHOR]

Paper-based strain sensors have attracted attention as a cost-effective and environmentally friendly approach to wearable electronic devices. This paper proposes a paper-based strain sensor created solely using hand-painting, which is a simple, equipment-free process utilized in green electronics. Commercial printing paper is coated with polydimethylsiloxane diluted with heptane, which provides moisture resistance and mechanical robustness while increasing the hydrophobicity of the surface. The electrodes and conduction channels are fabricated using a pencil for graphite deposition and a brush for the deposition of tin-doped indium oxide nanoparticles, respectively. With a gauge factor of 41.98 in tensile strain tests and 21.36 in compressive strain tests, our strain sensor exhibits a good sensitivity that is similar to that of previously reported paper-based sensors. We also demonstrate that our proposed strain sensor can be used as a weak motion detection device for humans and robots.

Researchers from academia and the corporate-sector rely on scholarly digital libraries to access articles. Attackers take advantage of innocent users who consider the articles' files safe and thus open PDF-files with little concern. In addition, researchers consider scholarly libraries a reliable, trusted, and untainted corpus of papers. For these reasons, scholarly digital libraries are an attractive-target and inadvertently support the proliferation of cyber-attacks launched via malicious PDF-files. In this study, we present related vulnerabilities and malware distribution approaches that exploit the vulnerabilities of scholarly digital libraries. We evaluated over two-million scholarly papers in the CiteSeerX library and found the library to be contaminated with a surprisingly large number (0.3-2%) of malicious PDF documents (over 55% were crawled from the IPs of US-universities). We developed a two layered detection framework aimed at enhancing the detection of malicious PDF documents, Sec-Lib, which offers a security solution for large digital libraries. Sec-Lib includes a deterministic layer for detecting known malware, and a machine learning based layer for detecting unknown malware. Our evaluation showed that scholarly digital libraries can detect 96.9% of malware with Sec-Lib, while minimizing the number of PDF-files requiring labeling, and thus reducing the manual inspection efforts of security-experts by 98%.

With increasingly complex neural network architectures and heterogeneous device characteristics, finding a reasonable graph partitioning and device placement strategy is challenging. There have been prior attempts at learned approaches for solving device placement, these approaches are computationally expensive, unable to handle large graphs consisting over 50000 nodes, and do not generalize well to unseen graphs. To address all these limitations, we propose an efficient single-shot, generalized deep RL method (SGDP) based on a scalable sequential attention mechanism over a graph neural network that is transferable to new graphs. On a diverse set of representative deep learning models, our method on average achieves 20% improvement over human placement and 18% improvement over the prior art with 15× faster convergence. We are the first to demonstrate super human performance on 8-layer recurrent neural network language model and 8-layer GNMT consisting of over 50000 nodes, on 8-GPUs. We provide rationales and sensitivity study on model architecture selections. [ABSTRACT FROM AUTHOR]

Let $\mathbb {F}_{q}$ be the finite field of $q$ elements. In this paper we obtain bounds on the following counting problem: given a polynomial $f(x)\in \mathbb {F}_{q} [x]$ of degree $k+m$ and a non-negative integer $r$ , count the number of polynomials $g(x)\in \mathbb {F}_{q} [x]$ of degree at most $k-1$ such that $f(x)+g(x)$ has exactly $r$ roots in $\mathbb {F}_{q}$. Previously, explicit formulas were known only for the cases $m=0, 1, 2$. As an application, we obtain an asymptotic formula on the list size of the standard Reed-Solomon code $[q, k, q-k+1]_{q}$. [ABSTRACT FROM AUTHOR]

A paper based chemiresistor has been fabricated to selectively sense ethanol in human breath. The chemiresistor was composed of a sensing mixture of multiwall-carbon-nano-tubes (MWCNTs), poly (diallyl-dimethyl-ammonium chloride) (PDDA), alcohol dehydrogenase (ADH), and coenzyme (NADH). The aluminum electrode was deposited on the paper surface, followed by drop-casting of the aforementioned sensing mixture. The resistance of the sensors was measured by exposing the same in gas-vapor mixture as well as the sample solution. The surface-modified MWCNTs specifically broke down ethanol present in the gas-vapor mixture or in a solution to generate a quantitative electronic response proportional to the ethanol concentration. Subsequently, the interference of other volatile organic materials was also tested to prove the selectivity and sensitivity of the sensor towards ethanol in the presence of different volatile organic compounds (VOCs). The variation of the resistance during the interaction between sensor and ethanol was also characterized by measuring the surface potential of the channel material under ethanol exposure using Kelvin probe force microscopy (KPFM). The sensor was integrated with a voltage divider circuit, a display, and a microcontroller unit to make a proof-of-concept prototype for the point-of-care (POC) detection of ethanol in human breath. [ABSTRACT FROM AUTHOR]

There is an increasing demand for measuring respiratory rate (RR) to monitor the progression of clinical events such as cardiac arrest or during the admission to the intensive care unit (ICU). Current methods of respiration monitoring are complex, invasive, expensive and therefore require alternative techniques. In this paper, we utilized wearable and flexible technology to develop humidity sensors for long-term continuous monitoring of respiration. Using manual drawing and printing techniques, the sensors were made based on graphite trace and silver nanoparticles as two different sensing materials. The surface morphologies of the devices were characterized by Scanning Electron Microscope (SEM) to show the construction of the sensors. Additionally, the material characterization was performed to obtain the Raman Spectra. Paper was chosen as a flexible substrate owing to its biodegradability, porosity, and disposability. The humidity sensing characteristics of the sensors indicated the best sensitivity of 0.0564% for Graphite on Paper (GOP) sensor. Furthermore, the hygroscopic nature of the paper enables converting the humidity changes during inhalation and exhalation into electrical signals. The electrical signals are transmitted via an interface to a computer using a simple data-logging set-up. A set of normal, deep and apnea breathing conditions could be easily differentiated from these signals along with information on respiration rate and pattern. The functionality of sensors was also tested after light and rigorous exercises. The proposed sensor combines the advantages of being low cost, non-invasive, highly sensitive, stable and holds tremendous potential for wearable/flexible healthcare technology. [ABSTRACT FROM AUTHOR]

Interactive model steering helps people incrementally build machine learning models that are tailored to their domain and task. Existing visual analytic tools allow people to steer a single model (e.g., assignment attribute weights used by a dimension reduction model). However, the choice of model is critical in such situations. What if the model chosen is suboptimal for the task, dataset, or question being asked? What if instead of parameterizing and steering this model, a different model provides a better fit? This paper presents a technique to allow users to inspect and steer multiple machine learning models. The technique steers and samples models from a broader set of learning algorithms and model types. We incorporate this technique into a visual analytic prototype, BEAMES, that allows users to perform regression tasks via multimodel steering. This paper demonstrates the effectiveness of BEAMES via a use case, and discusses broader implications for multimodel steering. [ABSTRACT FROM AUTHOR]

The measurement of water inside a transformer is essential to maintain its reliable operation, as the water content can increase as the transformer ages. This measurement is frequently performed by a utility as a part of its periodic maintenance activities. In this paper, the application of optical fiber sensors as an online method to measure water content of paper inside an operating transformer is presented. There are several advantages of using these sensors, including their size, lightweight, flexibility, multiplexing, no-electromagnetic interference, etc. A unique benefit of fiber optic technology is that sensors can be embedded into the winding structure and operate in areas of high electric field strength. For this work, fiber optic water and temperature sensors are investigated by comparing their measurements to a commercial water activity probe immersed in oil. The study found that the determination of water content by fiber optic sensors compared closely with other techniques, which lead to the conclusion that they can be an effective technology for water measurement in an operational transformer. [ABSTRACT FROM AUTHOR]

The performance of oil-impregnated paper significantly affects the safety and reliability of transformers. Previous studies on water reducing the breakdown strength of oil-impregnated paper have been mainly due to increasing charge carriers and conductivity. However, the influence of water on the cellulose crystal structure of oil-impregnated paper is still not clear; in particular, its role on breakdown strength remains ambiguous. In this study, the AC breakdown strength and crystal structure of vegetable and mineral oil-impregnated paper with different moisture contents were investigated. The results show that with increasing moisture content, the cellulose crystallinity and crystal size increases linearly, while the breakdown strength decreases. The breakdown strength of vegetable oil-impregnated paper is higher than that of mineral oil-impregnated paper and is less affected by moisture. Herein, a model is proposed on the effects of water on the crystal structure of oil-impregnated paper and the correlation of breakdown strength with crystal structure is reported. [ABSTRACT FROM AUTHOR]

Wireless, passive, and cost-efficient monitoring of moisture within packaged food and medicine is important to ensure their safety and freshness. This paper presents paper-based single spiral inductance–capacitance (LC) sensors and a distance-insensitive readout system. The parasitic capacitance of the single-spiral coil is used to form an LC resonant circuit with its inductance. The printing paper is utilized as a humidity sensing material. A model for the LC sensor is analyzed and compared with HFSS simulation, showing the relative error within 6.3%. Nano-silver paste for the single-spiral coil was screen printed on the printing paper. The LC sensors with 4, 6, and 8-turns coils were characterized at relative humidity levels of 15%-90%RH by a readout coil at a fixed position. Comparison shows that the 8-turn sensor has the best linearity with respect to humidity. The sensitivity and response time were measured to be 120 kHz/%RH and 60 minutes, respectively, with the hysteresis errors less than 0.9%. During the practical monitoring, the tested signal frequency will have a shift if the coil’s relative position alters. To weaken the influence of the coil’s position, a readout coil, working at the quasi-resonant with the LC sensor was utilized to enhance the readout, resulting in more stable signal. According to the experimental results, the improved readout system can restrain the frequency shift within 1.1% at a readout distance from 2–50 mm when the ambient humidity is 60%RH. [ABSTRACT FROM AUTHOR]

Paper-basedpentacene organic thin-film transistors (OTFTs) with spin-coated gelatin (G) stacked gate dielectric layers, the Au/pentacene/G/G matrix-embedded iron (FeG)/Al/paper structure, were fabricated. The proposed composite-stacked bio-dielectric layer can be implemented using solutions with the degradable biomaterials. These materials enable a large-area printing of use-and-throw devices. Control devices (Au/pentacene/G/Al and Au/pentacene/FeG/Al structure) were also fabricated for comparison. High-performance paper-based OTFT constructed from the stacked gate dielectric layer exhibited a carrier mobility of 8 cm2/Vs, an ON/OFF current ratio of approximately 103, a subthreshold swing of 0.6 V/decade, and a threshold voltage of −1.4 V. These results are compatible to those OTFTs fabricated on other substrates. Therefore, the emerging biomaterial-based transistors on paper substrates may help in developing low-cost, environment-friendly devices. [ABSTRACT FROM AUTHOR]

Flexible electronics based on the paper have attracted significant attention. A paper-based triboelectric nanogenerator (TENG) consisting of commercial and low-cost materials, e.g., printer paper, polytetrafluoroethylene tape, and conductive ink, was proposed in this study. This TENG unit can directly illuminate 24 blue commercial LEDs. Furthermore, compound paper-based TENGs were developed and a considerable enhancement of the electrical output performance was thereby realized. These compound TENGs can also serve as a height sensor. [ABSTRACT FROM AUTHOR]

We experimentally study the pulse generation and the pulse train timing and amplitude stability of a monolithic passively mode-locked multisection quantum-well semiconductor laser. The laser emits a stable optical pulse train at a wavelength of 1070 nm and at a fundamental repetition rate of 20 GHz. Timing jitter and amplitude jitter analysis allows identifying distinct laser operating regimes of stable picosecond optical pulses. We obtain an ultra-low pulse-to-pulse timing jitter of 22 fs and find emission regimes which are unaffected by amplitude jitter. The lowest pulse width amounts to 2.6 ps, and the highest pulse peak power is estimated to be 556 mW at a low timing jitter of 170 fs and a negligible relative amplitude jitter of 0.05. [ABSTRACT FROM AUTHOR]

The applicability of using 2-furfural (2-FAL) and methanol as aging markers for synthetic ester impregnated paper insulation was investigated through laboratory aging experiments at temperatures of 80, 100 and 120 ?C. Methanol in the synthetic ester increased linearly with paper aging until degree of polymerisation (DP) reached 400. During this period concentration of methanol in oil was higher than that of 2-FAL, which proved the concept of using methanol to indicate early paper aging in the synthetic ester. However, the rate of methanol increase against the reduction of DP in the synthetic ester was about three times higher than that seen in mineral oil. This is due to a difference in the partitioning of the marker between oil and paper. Since the synthetic ester is more polar than the mineral oil, it attracted more methanol molecules from the paper, resulting in a higher concentration of methanol in oil for the same reduction of DP. In addition, a reduction in methanol was observed at the later stage of paper aging at 120 ?C. This could be due to either a change in the partitioning between oil and paper, or an esterification reaction which consumes methanol in the system. [ABSTRACT FROM PUBLISHER]

By combining radio-frequency identification (RFID) and paper-microfluidics technologies, a low-cost first-of-its-kind platform for comprehensive liquid sensing, i.e., the “smart test strip,” is presented, which enables portable wireless real-time liquid sensing with handhold devices (e.g., cell phones), and integration of various multifunctional electrical and chemical sensors, for numerous Lab-on-Chip applications, including manufacturing control, environmental monitoring, and point-of-care medical diagnostics. The fabrication of RFID tags and two types of microfluidics are accomplished by a single inkjet-printing process in a cost-effective environmental-friendly additive manufacturing approach, which makes possible the production of disposable, lightweight, and flexible sensing platforms. Taking advantage of the proposed smart test strips platforms, we demonstrate two proof-of-concept high-performance electrical sensors based on interdigitated electrode topologies: a resistivity-based sensor with a 1782 $\Omega$/( $\Omega$*m) sensitivity; nevertheless, the proposed permittivity-based sensor with a 15%/$\epsilon _r$ sensitivity, but the proposed integrated wireless platform, can facilitate the integration of even more chemical and electrical sensors. In addition, two on-strip antenna prototypes have been designed, optimized, and tested to work at 2.4 GHz and 13.56 MHz, respectively. Furthermore, the wireless interrogation of a complete proof-of-concept smart test strip is presented, which shows an excellent sensing resolution of 1.33 $\Omega$ over the range of 0–1371 $\Omega$. [ABSTRACT FROM PUBLISHER]

We report on investigation of the mechanical properties of paper electronics (printed and made out of paper). One key objective of such paper electronics is to achieve ultraflexibility. Therefore, it is important to understand electrical functionality and reliability of paper electronics under various physical (mechanical) deformations. Here, we show the general mechanical properties of the cellulose paper used and its electrical behavior under applied strain, tackling the main effects that need to be identified when building paper-based systems, from product performance and stability perspective. An overview of the stress–strain behavior of silver ink on paper is discussed, and then, we tackle a more specific analysis of the performance variations of paper sensors made with recyclable household materials when exposed to various mechanical conditions of tensile and compressive bending. This paper is important for developing stable wearable sensors for incorporation into Internet of Everything applications. [ABSTRACT FROM PUBLISHER]

Nowadays, reliability of power system is of great importance. Therefore, the condition of transformers as the expensive and critical components of a power system should be monitored and assessed. The dominant factor that causes limitation in transformers lifetime is the paper insulation. This paper aims to investigate the conspicuous influence of moisture content, especially in low oxygen and temperature on lifetime estimation under constant conditions, based on the results of previous experiments. Degree of polymerization (DP) is employed to quantify the effects of detrimental parameters with respect to their time-varying nature. This paper proposes a novel lifetime estimation-approach considering a yearly moisture growth for transformers. The results indicate different trend of DP profiles, which lead to an accurate lifetime estimation in comparison with DP obtained through ideal conditions. Furthermore, oscillations in the hot-spot temperature of transformers are demonstrated to have a negative effect on the lifetime. [ABSTRACT FROM AUTHOR]

Interest in using vegetable oils as dielectric coolants in power transformers dates back to the early studies on linseed- and castor- based fluids as possible replacements of mineral oil. However, interest in vegetable oils was lost due to their high viscosity and their tendency to oxidize. But, in the early 1990s and due to environmental concerns, the interest in dielectric fluids based on vegetable esters re-emerged. As a result, two vegetable ester? based oils were developed, namely, BIOTEMP, developed by ABB, and FR3?, developed by Cooper Power Systems. [ABSTRACT FROM PUBLISHER]

The oil-impregnated paper, as a vital part in the oil-paper insulation system, serves as the main insulation medium in converter transformer suffering various electric fields. However, the accumulated surface charge on the paper would accelerate the degradation of insulation system and may lead to surface flashover. Direct-fluorination is a method to change the chemical components of polymer matrix thus could affect the surface property of the dielectric material without the alternation of bulk property. This paper presents a method to modify the surface structure of the paper applied in transformers. The paper used in the experiment was treated using the F2/N2 mixture with a volume fraction of 10% for the F2 gas at a pressure of 0.05 MPa in a reaction vessel for 2, 5, 10 and 15 min, respectively. The chemical elements, functional group and physical morphology of the paper before and after modification were measured with energy dispersive X-ray spectroscopy (EDAX), attenuated total reflection infrared (ATR-IR) and scanning electron micrographs (SEM), respectively. Surface and volume resistivity of the fluorinated paper were measured. Furthermore, the surface charge property of the oil-impregnated paper was measured under various positive and negative voltages. Obtained results showed that the fluorination had an obvious influence on the chemical property and surface structure of the paper leading to the reduction of surface and volume resistivity. The treatment was shown to reduce the initial potential and cause acceleration in charge decay process. The trap distribution of the paper surface presented alternation as well. [ABSTRACT FROM PUBLISHER]

In this paper, the influence of partial discharges (PD) on the subsequent dielectric properties of oil-impregnated paper (OIP) is investigated. Dielectric frequency response (DFR) of OIP is investigated at varied levels of moisture, thermal aging, temperature, oil conductivity and electrode material, to allow comparison of these influences. It is shown that PD activity inside OIP can significantly change the real and imaginary parts of permittivity of the paper layers, especially in the frequency range below 100 Hz. It is shown that even if the PD activity is concentrated on a few percent of the test sample, the real part of permittivity measured on the entire sample after a few tens of hours of PD activity can increase up to 10 times at very low frequencies (∼ 1 mHz) and the imaginary part of the permittivity can increase up to 100 times at low frequencies (∼ 1 Hz). The change of the real and imaginary parts of permittivity due to PD activity is permanent. It is very similar to the change caused by thermal aging, and somewhat similar to the change caused by moisture and higher oil conductivity. It is also shown that the dissipation factor of OIP in contact with copper and brass increases, even in the absence of PD, but contact with aluminum and stainless steel has no influence on DFR of OIP. The results suggest that the influence of PD can be significant when estimating the moisture content or the level of thermal aging of OIP with DFR method. [ABSTRACT FROM PUBLISHER]

This paper presents an experimental work investigating the failure data of oil-impregnated paper under pulsating DC voltage. The failure data of the oil-impregnated paper specimens were obtained through constant voltage stress tests; the Weibull distribution was used to estimate the statistical distribution of failure data. The exponential function (EF) and the inverse power function (IPF) were used to modify the Weibull distribution of failure data, so as to obtain two dual-variable Weibull failure distributions (WFDs), which were used to analyze failure data of oil-paper specimens obtained under pulsating DC and individual DC and AC voltages. Their adequacies were evaluated by using failure data obtained through the constant stress tests under various voltages. Both EF-modified and IPF-modified WFDs show more adequacy for failure data of oil-paper insulation under DC and pulsating DC voltages than AC voltages. The EF-modified WFD was more adequate than IPF-modified WFD in estimating the statistical distribution of failure data. [ABSTRACT FROM PUBLISHER]

This paper discusses the effect of temperature on polarization and depolarization current measurements on paper oil insulation system. The influence of copper sulphide formed due to corrosive sulphur in mineral oil, on the changes in polarization and depolarization current at different temperatures are considered. A significant increase in the magnitude of polarization and depolarization currents due to deposits of copper sulphide on paper layers is observed. The conductivity of paper insulation increases significantly with increase in temperature. The increase in current is attributed to thermally active conducting particles of copper sulphide. The Debye model parameters of equivalent circuit under copper corrosion have been computed and a model for failure due to copper sulphide is explained using the data on polarization and depolarization currents. [ABSTRACT FROM PUBLISHER]

The oil-paper insulation of valve-side windings in a high voltage direct current (HVDC) converter transformer is subjected to both complicated voltage and severe thermal stresses. Partial discharge (PD) occurring in oil-paper bounded cavities is influenced by voltage stress type as well as temperature. This paper presents PD behaviors in an oil-paper bounded gas cavity under pulsating DC voltages. The voltage across the gas cavity and PD inception voltages at different test conditions are analyzed. Influences of temperature on statistical PD distributions and parameters are also presented. A numerical model is used to interpret PD behaviors under pulsating DC voltages and various temperatures. Experimental results and theoretical statements show that the temperature exhibits a great influence on the behaviors of cavity discharge under pulsating DC voltages. Volume resistivity, gas pressure, charge decay time constant, and electron generation rate are the primary parameters influencing PD behaviors at different temperatures. [ABSTRACT FROM PUBLISHER]

Furfural content in oil is a valuable indicator of cellulose paper degradation and is widely utilized in aging assessment for power transformers. However, with the same aging degree of insulation paper, the actual furfural content in oil is influenced by temperature because furfural partitioning behavior in the oil-paper insulation system of power transformers changes with temperature. Thus, correction of the temperature effect on furfural partitioning is crucial for accurate assessment of the aging of power transformers. In this research, oil-paper samples with different furfural contents were prepared through an accelerated thermal aging test. A furfural equilibrium experiment was conducted at different temperatures to construct a furfural partitioning diagram. The mass fraction of furfural in oil and paper was calculated. Results showed that the mass fraction of furfural in oil increases with temperature rising and aging deepening, which means that furfural tends to migrate from paper to oil at high temperatures and deep aging conditions. The change in furfural partitioning between oil and paper at different temperatures causes a deviation in paper aging assessment. To correct the temperature effect on furfural partitioning, a furfural correction factor was developed to normalize furfural contents in oil at different temperatures to a reference temperature. The furfural correction factor was verified by experimental data and then introduced into the relation between degree of polymerization of paper and furfural content of oil. Verification results showed that the corrected equation can enhance the accuracy of paper aging estimation at different temperatures. The findings of this work indicated temperature effect on furfural partitioning should be considered when determining the furfural thresholds and evaluating the aging condition of power transformers. [ABSTRACT FROM PUBLISHER]

We have interfaced an array of polymer light emitting diodes (OLEDs) fabricated onto a glass substrate to a sheet of paper via a pressure sensitive conducting adhesive. By screen printing a series of capacitive touch pads and connecting tracks onto paper using a low-cost conductive graphite ink, we are able to drive individual pixels in the OLED array via CMOS-based electronics that are also attached to the paper. Three AA batteries are used to power the CMOS electronics, touch pads and the OLED array, with pixels in the array operating at a brightness of up to 210 cd/m2. The work highlights a practical interface between plastic- and paper-based electronics. [ABSTRACT FROM PUBLISHER]

The water concentration in transformer paper insulation must be monitored because, if it becomes too high, the paper insulation will age rapidly [1]-[4] and the transformer may fail on overload [5]-[9]. A failure can occur on overload if the temperature of the paper rises sufficiently to cause evolution of water bubbles. If these bubbles cause dielectric failure of the oil gap, the transformer may fail catastrophically. Paper insulation becomes brittle as it ages, and eventually becomes too brittle to act as an effective insulator. Oxygen increases the aging rate because the acids created by chemical reactions occurring in the oil, paper, and oxygen react further with water [10]-[12]. A study of the thermal aging of Kraft paper found that wet oxygenated paper degrades 40 times faster than the same paper heated in a dry oxygen-free environment [4]. The paper within a transformer is likely to degrade fastest at the top of the winding, where it is hottest [13]. Since the water concentration in the paper significantly influences its aging, it is important that the water concentration be measured accurately at the top of the winding. [ABSTRACT FROM PUBLISHER]

Beeswax, a natural nontoxic biological material, is used as the gate dielectric of flexible low-voltage indium–zinc-oxide (IZO)-based homojunction thin-film transistors (TFTs) on paper substrates. A high specific capacitance of 5 \mu \textF /cm2 is measured at 1 Hz in the beeswax film due to the electric-double-layer effect. The current ON/OFF ratio, subthreshold swing, and field-effect mobility of the IZO-based TFTs on paper substrate are estimated to be 7.6\times 10 ^6 , 86 mV/decade, and 14.6 cm2 /Vs, respectively. In addition, our results demonstrate that the flexible oxide-based TFTs on paper substrate show a good stability after 3000 times bending and 30 days aging testing. Such flexible low-voltage oxide-based homojunction TFTs have potential applications in portable paper electronics. [ABSTRACT FROM PUBLISHER]

The application of vibration-based condition monitoring methods to power transformers has shown the potential for detecting mechanical transformer failures. The ageing of winding insulation paper, which is a common problem in long-serving power transformers, affects both the electrical and mechanical strength of the windings. This paper is concerned with the vibration features of winding disks with aged insulation paper. The vibration characteristics of single-layer winding disks wrapped with insulation paper are investigated. By examining the vibration frequency responses of winding disks with different degrees of ageing of insulation paper, the effects of aged paper on the vibration behaviors of winding disks are demonstrated. The experimental results show that changes in the vibration responses of winding disks can be related to the ageing of insulation paper, and thus it is possible to detect this failure mode in a power transformer using a vibration-based method. A qualitative explanation for these changes is presented, using the degradation of the mechanical strength of the insulation paper. [ABSTRACT FROM AUTHOR]

The degradation of oil-impregnated paper induced by partial discharge (PD) seriously affects the life of power equipment. In order to investigate the relationship between partial discharge and the degradation of oil-impregnated paper, PD characteristics and trap parameters of the impregnated paper are measured. In this work, a cavity discharge model is adopted and samples with different degrees of polymerization (DP) are fabricated using thermally accelerated aging to simulate transformers with different lifetimes. For each sample, phase resolved partial discharge (PRPD) spectrograms are recorded for various partial discharge times. The characteristics of partial discharge are analyzed, and the trap parameters of specimens are obtained by the thermally stimulated depolarization current (TSDC) method. Following this, the microstructures of the samples are observed using a scanning electron microscope (SEM). It is found that the damaging breakdown process of oil-immersed paper can be divided into three stages: initial stage, developing stage and pre-breakdown stage. There also exist two levels of trap on the surface of oil-impregnated paper: shallow (0.10-0.59 eV) and relatively deep (0.60-0.90 eV) energy. Importantly, the thermal aging makes the trap energy deeper while electrical aging makes the trap energy shallower. [ABSTRACT FROM AUTHOR]

The combination of a dielectric solid (paper) and a dielectric liquid (mineral, vegetable, or silicone) is the most commonly used insulation system in power transformers because of the favorable dielectric properties of these insulations and the high heat capacity of the oil, which allows for cooling. It is known that temperature is the main parameter in determining the aging of these insulations and, therefore, the lifetime of a power transformer. [ABSTRACT FROM PUBLISHER]

To optimize the insulation design of high-temperature superconductivity (HTS) cable, the multilayer wrapping cable insulation properties in the liquid nitrogen should be studied. In this paper, we investigated the breakdown properties of multilayer wrapping of cable insulation in liquid nitrogen. AC and dc breakdown tests of a minimodel cable with an insulation floor composed of polypropylene laminate paper (PPLP), PPLP/100HN (DuPont polyimide film), PPLP/100CR (DuPont polyimide film), and PPLP/150FCR019 (DuPont polyimide film) and of singer-layer sheets, including PPLP, 100HN, 100CR, and 150FCR019, respectively, were performed in liquid nitrogen. The breakdown characteristics of the sheets and model cable insulation consisting of PPLP and composite insulation schemes according to the arrangement of PPLP/HN, PPLP/100CR, and PPLP/150FCR019 were compared. For the sheets, the ac breakdown strength of 100HN is greater than that of 100CR; this may be because there are large amounts of organic-inorganic interface in 100CR. The dc breakdown strength of 100CR is greater than that of 100HN, which may be because the space charge of 100CR homogenizes the electric field. For the minimodel cable insulation, the dc and ac breakdown strengths of the composite insulation in which the third layer of wrapping tape insulation material was composed of three layers of 100HN, which is overlapped completely, are greater than those of the insulation consisting of PPLP and other composite insulations. [ABSTRACT FROM PUBLISHER]

In this paper, we report the development of an oxygen sensor using a simple device made from a film of ZnO crystals dispersed over a paper surface. Due to the high porosity of this kind of device made from paper and ZnO, a large photoconductive effect is observed as result of the fast absorption and desorption of oxygen from the ZnO surface. To detect oxygen, we propose to use ultraviolet (UV) illumination over the photoconductive surface of the sensor, the applied UV light produces oxygen desorption causing current variations through the sensor that are proportional to the oxygen presence nearby the sensor surface. The sensor developed in this paper is attractive because it is remarkably easy to fabricate, employs only very low-cost materials for its construction, and shows a better sensitivity at low concentration of oxygen at partial vacuum environments. [ABSTRACT FROM PUBLISHER]

The article announces that Gabriele Minatti, received the Sergei A. Schelkunoff Transactions Prize Paper Award.

In this paper, we report a multianode paper-based microbial fuel cell (MFC) capable of generating a power density of 28.4 μW/cm2. This MFC features: 1) flexible multilayered carbon cloth anodes for bacterial attachment and 2) paper reservoirs for holding the anolyte and catholyte for an extended period of time. The hydrophobic barriers in the anodes and paper-based reservoirs were patterned by impregnating and selectively polymerizing photoresist through UV lithography. Upon inoculum/catholyte introduction, a current of 211 μA/cm2 was immediately generated. By using the multianode MFC, the power and current densities increased by 5× and 3×, respectively, compared with a single anode one. The paper-based MFC is expected to be a simple and easy-to-use power source for single-use diagnostic biosensors because even sewage or soiled water in a puddle can become an excellent source for operating MFCs and harvesting electricity through bacterial metabolism. [ABSTRACT FROM PUBLISHER]

Oil-paper insulation, as a major insulation mode used in power transformers, is continuously and unavoidably subjected to repeated lightning impulses, which may bring potential risk to the insulation system. Therefore, in this work, accumulative effect of repeated lightning impulses and its damage mechanism in oil-impregnated paper (OIP) are investigated. Firstly a repetitive impulse accumulating test platform was set up, and tests were performed to confirm the existence of accumulative effect of repeated lightning impulses. Then atomic force microscope observation and frequency domain spectroscopy were carried out on OIP samples with different times of lightning impulses, based on which the influence of lightning impulses accumulative effect on surface morphology and dielectric properties of OIP was investigated. The results indicate that repeated lightning impulses produce accumulative damage to the OIP and hence lead to the morphology change and generation of translucent gelatinous substance on the sample surface. Both the surface roughness and dielectric parameters increase with the accumulating of repeated lightning impulses, which can be attributed to the effects of polar products, fiber deformation and the translucent gelatinous substance together. At last, the possible mechanism of the accumulative effect was discussed and relevant tests were carried out to verify the speculation. [ABSTRACT FROM PUBLISHER]

The iso-margin method based on the classical analytical equations is widely used in the development of extra high voltage (EHV) bushing. Therefore, its effectiveness and feasibility have been fully validated. However, with the theoretical formula, it is difficult to evaluate the influence of stray capacitance and temperature on the internal electric stress of the ultra high voltage (UHV) bushing. It?s necessary to further improve the traditional iso-margin method. Firstly, the basic principle of iso-margin method has been briefly described. After that, the E-field distribution of condenser bushing was investigated on the Finite Element Method (FEM) computing platform. Then, the mathematical model of the advanced equal margin design method was established. Furthermore, this paper presents the program flow of optimization which combines the simulation of electro-thermal coupling process and the particle swarm optimization (PSO) algorithm. The proposed methodology was applied to the design of the prototype of the UHV resin impregnated paper (RIP) oil-SF6 bushing, which realizes the uniform axial E-field distribution of the bushing condenser. Meanwhile, the partial discharge margin between adjacent foils can be equal. Moreover, the hot-spot temperature is lower than the operation limiting temperature of the RIP material. The bushing condenser was fabricated according to the optimal structure design. The prototype of bushing has passed through all the type tests. In this paper, the FEM electro-thermal coupling simulation and the advanced equal margin design method were applied to the inner insulation structure optimization of the UHV RIP oil-SF6 bushing. Meanwhile, the proposed methodology provides some theoretical guidelines for the future research and development of other types of bushing on the UHV level. [ABSTRACT FROM AUTHOR]

Heretofore, unlike HVAC transformers, there is not much experience in both insulation design guides and test methods for ultra HV converter transformers. This special insulation phenomenon is very prominent due to the complication of voltage applied on valve-side windings of converter transformers. There is a severe lack of empirical research on partial discharge in oil-paper insulation under the combined ACDC voltage. The study in this paper provides a timely research into the issues. Nine possible configurations, which intent to simulate different defects in the transformer, have been investigated. The PD inception voltages varied ratios of combined AC-DC voltages were conducted. The discharge magnitude and its relation with the applied voltage for selected four common configurations were obtained during voltage increasing and decreasing respectively, which presented the PD initiating process and also reflected the insulation behavior of dielectrics. Besides, the Finite Element Analysis Soft was used to propose the effect of morphology of electrode surface (3 dimensional roughness is approximately 0.03 mm) on PD characteristics, which is very lacking in the previous references. The roles of DC and AC component in PD characteristics were discussed in the context of the relevant work in literatures. [ABSTRACT FROM AUTHOR]

Copper sulfide deposition on cellulosic insulating materials in oil-immersed transformers is evaluated by heating tests stipulated by IEC 62535. Although this method is suitable for evaluation of the corrosivity of unused insulating oil, the subject remains in diagnosis of the insulating oil used. It is because dibenzyl disulfide (DBDS), which is the prime compounds that cause copper sulfide deposition, is consumed by the reaction with copper during operating of transformer. Therefore, it is necessary to detect the existence of DBDS in insulating oil diagnosed as non-corrosivity by IEC 62535. The proceeding paper [6] reports that Bibenzyl (BiBz) and Dibenzyl sulfide (DBS) will be formed in the insulating oil as by-products of copper sulfide formation between copper and DBDS in oxygen-poor atmosphere which imitated the closed-type transformers. These by-products are considered to be the indication of copper sulfide formation. However, the influence of oxygen and addition agent (e.g. 2,6-di-tert-butylp- cresol) on the mechanism of the by-product formation is unclear. The purpose of this study is to elucidate the influence of oxygen and DBPC in by-products formation for development of diagnosis. It became apparent that benzyl alcohol, benzaldehyde and benzoic acid generate as by-products of copper sulfide formation in the air atmosphere which imitated the open-breathing transformers. Furthermore, it became apparent that the reaction product of benzyl radical and the radical of DBPC generates as by-product of copper sulfide formation in the insulating oil containing DBPC. These by-products are detectable even if DBDS disappears. Therefore, it is thought that diagnosis of the open-breathing transformer is possible by detecting these by-products. [ABSTRACT FROM AUTHOR]

A post mortem analysis of scrapped transformers provides an opportunity to directly measure the properties of in-service aged paper insulation. Investigations on 10 scrapped 275 kV and 400 kV power transformers were carried out, where Tensile Index (TI) and Low Molecular Weight Acid (LMA) of the paper insulation sampled from various locations were measured. Multiple-layer TI profile demonstrated the effect of oxidized oil on paper ageing which was confirmed by laboratory ageing experiments. It is LMA rather than High Molecular Weight Acid (HMA) that accelerates the paper degradation. LMA acts as the paper ageing accelerator and also as the paper degradation by-product, supporting the view that self-accelerated hydrolysis process is the main paper ageing mechanism. Finally, a generic relationship between LMA in paper and TI of paper was revealed based on both in-service and laboratory ageing data, i.e. the lower the TI of paper, the higher value of LMA in paper is measured. It implies that LMA in oil can be a potential paper ageing indicator pro viding a link between LMA in oil and paper is found. [ABSTRACT FROM AUTHOR]