Search

Madagascar undergoes, like all countries in the world, the effects of climate change. in fact, since the last 5 years, in the coastal regions and the basins, the temperature has raised from 2 to 2.5 ° and varies between 34 to 36 ° in the shadow during the rainy season and on the high hills, the temperature diminishes from 2 to 2.5 ° during the dry period and varies from 4 ° to 8 °. However, the structure of lodging of 60% of the people are not adapted to this temperature change. Particularly, in the coastal regions, the walls of the houses are made of sheet iron. The inside of these houses is very hot when the weather is hot and very cold when it is cold. The inhabitants can’t afford the houses made in bricks or breeze block and the natural sources of aggregates are in the process of exhaustion. In the other part, we have seen that tons of paper are ready to be burned at the administrative services (public treasury, public financing, universities, ...) and the newspaper publishers. So, it becomes a must to find another way to the construction materials, justifying in that case our research axis. This study aims at the developing of construction material based on recycled paper, binder and aggregate. It deals of picking up or gathering all waste of papers and outdates newspapers and transforming them into brick for building constructions. What’s more, papers have prominent thermal insulating properties. Our work is focused on the study of variants on the different manufacturing processes, the choice of binder, the preparation of the specimens with different binders and different dosages, the mechanical compression tests for different binders, the evaluation of thermal conductivity for different binders and the numerical simulation of the thermo mechanical behavior of samples. The result is a lightweight brick with good thermal insulation. Tests have also made it possible to declare that the material has acceptable mechanical properties : the compressive strength is 1.56 [N/mm2], higher than the value prescribed by the standard for lightweight concrete blocks for construction of 1.1 [N/mm2], the value of thermal conductivity is 0.114 [W/mK], ten times less conductive heat than concrete and it can replace glass wool for a double its thickness. The specific weight is 57.5 [kg/m2].The practical results were confirmed by finite element simulations.

In recent years, there has been tremendous growth of interest in the utilization of non-wood based material to support the insufficient raw materials availability for the pulp and paper industry. Therefore, this study was conducted to investigate the characteristics of 120 gsm linerboard and corrugated medium paper made from unbeaten durian rinds chemi-mechanical (CMP) pulp. The linerboard and corrugated medium paper were prepared and tested according to Malaysian Standards / International Organization for Standardization (MS ISO) and Technical Association of the Pulp and Paper Industry (TAPPI) standard methods. Based on the burst index (2.03 kPa.m 2 /g), RCT (1.97 N.m 2 /g) and CMT (129N), the linerboard and corrugated medium from CMP durian rind pulp have shown a good potential as an alternative raw material for papermaking and comparable with other types of wood and non-wood based papers as well as current commercial papers.

Sudden natural disasters and public security incidents are emerging one after another. Scholars and governments are increasingly concerned about the issues of urban public security. This paper analyzes the high-cited literature on 261 urban security-related topics in Web of Science in the form of knowledge maps. We found that the United States and China have the strongest research on such issues as health, disease prevention and control, pollution, residential environment issues, agriculture and food issues etc. Among them issues related to new technologies are hotspots in urban security research.

The design engineering is one of essential work in modern manufacturing environment. The optimization is principal technique to be used widely for searching the solution. However, primary process of optimization is to know the relation between design input parameters and target output. In this work, an artificial neural network (ANN) approach as an intelligent algorithm is proposed to construct the relation and also provides it in form of mathematic modeling. Even though the ANN modeling is so call a backblock due to difficulty to understand complicated equations, it is simply constructed by automate iteration process. A case of paper helicopter is used as an example of the application. The classical 2k Factorial design is used to provide an experiment plan to create training and testing data. 93 experiments are carried out. The architecture of ANN is set according to lowest Mean square error (MSE) of training and testing procedure. The result of 5-10-1 architecture has shown ability to accurately predict output, landing time, with MSE of 0.012. With such a highly quantitative accuracy of results, the developed model using the neural network approach can be used for finding the suitable input parameters to achieve a desired target output. In this case, the design of dimension (A) Depth of cut wing is 1.3 cm., (B) Length of wing is 12.9 cm., (C) Length of body is 9.0, (D) Width of body is 2.0 cm., and (E) Depth of cut body is 0 cm. yield the lowest area of a paper helicopter that can meet the target landing time, 2.85 + 5% second.

Turnover intentions in academic institutions has become one of the main concern of the management as surviving and achieving excellence is very much about having the knowledgeable and committed employee. Therefore, it is one of the main and foremost issue for a management of higher education institution to give important. There are many factors that influence an academician to have turnover intentions. Hence, this study’s focus was to investigate the relationship between role ambiguity, work-overload, work family conflict, co-workers warmth, co-workers competence and turnover intentions. The variables studied in this paper were analyse from a research framework. The finding of this study has been discussed on role ambiguity, work-overload, work family conflict, co-workers warmth, co-workers competence and turnover intentions. Conclusion has been drawn from the support of literature that states that the variables influences on turnover intentions. This paper’s finding provides valuable guidance for researcher and practitioners to overcome and improve the current mechanism to reduce turnover intentions. The research has also found few new paths for thinking on how to manage employees that having turnover intentions in any organizations.

In recent years, there has great deal of attention towards customer value since the concept of value creation prompted in the Service-Dominant (S-D) Logic in marketing theory (Vargo & Lusch, 2004). With that, one of the aspects that is crucial is building and maintaining relationships that prepares customers for future co-creations. In context of higher education institutions (HEIs), students move from one life cycle stage to another, thereby needs and expectations also evolve, and when they graduate, it may dissolve. With service innovations, a smart active relationship between students and HEIs should be part of any institutions internal branding efforts. As institutions delve into relationship with students, their focus on co-creation with an aim to translate students to advocates, someone who will spread the positive word-of-mouth, defend the brand, and most importantly to feel a sense of responsibility to represent the brand, when need arises. This calls for HEIs to not only manage exchange processes in their internal branding efforts, but also focus on students’ perceived value-in-use (ViU). The purpose of this paper is to explore perceived ViU of students at private HEIs, from the effects of extra-role behavior, trust, self-brand connection and brand prominence towards influencing students to engage in advocacy behavior.

This article introduces the use of PCI software production day draw satellite is projective like production process, analyzes the key technologies in the production, summarizes the Suggestions to improve the quality of results, strengthen quality control method is proposed, for the day draw satellite orthogonal projection as mass production work has carried on the beneficial exploration.

This paper presents a review of literature relating to Life Cycle Costing (LCC) and Life Cycle Assessments (LCA) in Gas District Cooling plant. The gas district cooling plant uses either vapour compression process or absorption process for the chilled water generation. Both processes have impacts on the economic aspects as well as the contribution to CO 2 emissions; thus, integration of the cost and environmental analysis of both processes are necessary. An extensive body of literature exists on both subjects, however, there is very limited number of available literature on the integration of LCC and LCA. The purpose of this review is to find the most suitable optimization model which can integrate the LCC and LCA to provide the best decision in choosing the most cost-effective and environment-friendly system. This review assesses the literature from thirty-four journals, research papers, and case reports from the year 1995 to 2017. The result of this review shows that the goal programming methodology is the appropriate method for integrating LCC and LCA because it provides the optimal decision in choosing the most cost-effective, environment-friendly system for the chilled water generation.

A total of 14 contributions were presented in the Theory and Modelling sessions at EC-17. One Theory and Modelling paper was included in the ITER ECRH and ECE sessions each. Three papers were in the area of nonlinear physics discussing parametric processes accompanying ECRH. Eight papers were based on the quasi-linear theory of wave heating and current drive. Three of these addressed the application of ECCD for NTM stabilization. Two papers considered scattering of EC waves by edge density fluctuations and related phenomena. In this summary, we briefly describe the highlights of these contributions. Finally, the three papers concerning modelling of various aspects of ECE are reported in the ECE session.

The aim of research was to observe and to describe biodestructions of fabrics that usually used inside a home, to estimate the destruction (total number of destruction “N” and destruction index “K”). The samples of fabrics were placed into a thermostat in sterile Petri dishes on moistened sterile filter paper in order to stimulate the microflora occurred on fibers. Incubation carried out in a thermostat at a +24-28 °C, humidity of 90-100% and exposed for 8 month. The samples examined with a microscope. As a result of the study of fiber’s damage, the types of damage were identified as follow: layering, fretting, mottling, fouling, spotting, swelling, granular disintegration, delamination, thinning, and damage of the fiber wall. Initially the most destructed was detected sample of natural silk and hemp according to the highest value of destruction index K. However, after 8 months of exposure, this sample turned out to be the most resistant to biodegradation. The data obtained based on the evaluation of the biostability of fabrics made from various textile fibers showed that the usage of natural silk, hemp and polyester able to supply textile with resistance to biodegradation by spontaneous microflora.

This paper was written by a group of European researchers believing that now is the right time to frame the Space Weather and Space Climate discipline in Europe for future years. It is devoted to openly discussing the organisation and sustainability of the European Space Weather community and its assets in the (near) future. More specifically, we suggest that the European Space Weather community lacks a uniting organisation to help the community to sustain and develop the successful efforts made thus far. Our aim is not to draw a complete and exhaustive panorama of Space Weather throughout the world, nor even throughout Europe. It is not a new white paper on the science and applications: there exist many (e.g. Tsurutani et al., 2020 Nonlinear Processes Geophys 27(1): 75–119); nor another roadmap: several important have been published recently (e.g. Schrijver et al., 2015. Adv Space Res 55(12): 2745–2807; Opgenoorth et al., 2019. J Space Weather Space Clim 9: A37). Our aim is to question our practices and organisation in front of several changes that have occurred in the recent years and to set the ground to provide coordinated answers to these questions being posed in Europe, and to make these answers discussed throughout the world. This group was assembled first through a series of sessions devoted to the sustainability of Space Weather research during the European Space Weather Week (ESWW) series of meetings, specifically: ESWW 14 (2017), ESWW 15 (2018), and ESWW 16 (2019). It then grew from discussions and personal contacts. The authors do not pretend to identify the full range of opinions in Europe, although they do come from 13 different European countries with a large span of ages (around half are below the age of 40 years old at the time of writing) with a good gender balance ending with a diverse mix of young and motivated scientists and senior people who have played a role in shaping the Space Weather community in Europe. The questions and the propositions to organise Space Weather in Europe in the future result from their discussions through these meetings and through remote meetings during the pandemic. We wish to share them with all those who consider themselves as members of the European Space Weather community and/or are interested in its future and to propose actions. We do this, bearing in mind that Europe plays a key international role in Space Weather which extends beyond the ESA and EU/EC geographic area.

The rational use of wood cannot be imagined without the use of synthetic resins and adhesives, on the basis of which all the main types of wood composite materials are made. The use of synthetic resins provides: production of high-quality glued products with an increased service life due to strength properties; reducing the material consumption of manufactured products and more complete use of low-grade raw materials; improve the fire, bio - and chemical resistance of manufactured materials. Due to the lower consumption of raw materials for the manufacture of glued parts, their cost is usually lower than that of solid wood parts. The international market of adhesives is represented by a wide range, in which 63% are synthetic adhesives. When wood is processed at pulp and paper enterprises, 40-50 million tons of alkaline lignin, 5 million tons of lignosulfonate, 3.5 million tons of technical hydrolytic lignin are produced annually in the world. In the future, the volume of industrial processing of wood will increase by 50-60% and therefore the issue of disposal of such waste is the most important task. Lignins in the form of various large- tonnage wastes are an environmental and technological problem for many chemical industry enterprises and adjacent residential areas.

Service-Dominant Logic (S-D Logic) and service science provide a way for innovators and learners to look at the world differently and thereby improve quality-of-life for people over time. The continued development of service science as an emerging transdiscipline will depend on developing better measurements and tools for understanding the past and future identities, reputations, values, goals, and strategies of entities interacting to achieve outcomes. For example, Service Innovation Roadmaps (SIRs) can be thought of as an attempt to make explicit the “learning investment strategy” of responsible entities (people, businesses, regional governments) to change and become “better future version of themselves” in terms of value co-creating service interactions. In short, SIRs can help with the challenge of upskilling people in an age of accelerating technology and policy changes. All service systems, as responsible entities learning, invest in three types of activities, herein termed Run- Transform-Innovate activities. This short paper provides context for a research direction to develop further the notions of SIRs and embrace complexity economics as a tool for advancing service science.

The expediency of using waste generated during industrial processing of commercial aquatic biological resources is justified. By-products obtained as a result of cutting fish and non-fish objects represent a significant source of biologically valuable substances. The article provides information on the use of secondary raw materials for the production of feed products for farm animals, birds and aquaculture facilities for the production of biologically valuable products, biofuels. The paper presents an assessment of the technological potential of by-products formed during the processing of the most profitable commercial objects – crabs and salmon. Such bu-products include carapace of the cephalothorax, crab entrails, as well as the caviar film remaining during the punching of salmon fish hawks. The assessment of the total chemical composition of the waste from the cutting of the blue crab was carried out. The high biological value of the hepatopancreas and carapace crab proteins was revealed. The general chemical waste from punching of chum salmon hawks is given. The high biological value of these waste lipids was confirmed by evaluating their fatty acid composition. The possibility and necessity of using the studied waste for the production of biologically valuable products is experimentally justified.

The paper presents data concerning the influence of ammonia on wet flue gas desulfurization (WFGD) absorber. Paper presents preliminary results of an industrial scale study on WFGD absorber, that collects flue gases from four boilers with total flue gas flow capacity of the WFGD equal to 1 500 000 Nm3/h. Each boiler is equipped with selective non-catalytic reduction (SNCR) with urea injection. It was shown, that ammonia present in the flue gas upstream the WFGD increases the pH of absorption slurry, impacting the desulphurization process. In addition, analysis of particulate matter upstream and downstream the absorber shows an increase of the concentration of ammonium species in the particulate matter about 14 times, as average. Moreover, a non-optimized denitrification process can cause a high NH4+ concentration in the absorption slurry (up to 768 mg/L) and raw wastewater (up to 891 mg/L).

The paper makes a comparison between four types of briquettes: first was wheat and rapeseed briquettes, second was wheat briquettes (batch 2018), third was wheat briquettes (batch 2017), and fourth was lucernes briquettes, from the point of view of the physical and energetic characteristics, in order to choose the best ones and their corresponding market. The main properties studied are the density and moisture of the briquettes, physical properties, and also calorific power and ash content as energetic properties. Research results show that wheat and rape briquettes have had high calorific value but low density, compared to other types of briquettes. A general conclusion rise from whole paper, respectively the vegetable biomass is a renewable material and briquettes from it remains the best option of combustible materials.

In this paper authors present research results which are the optimum parameters of the torrefaction process using straw from oats and maize. The most important parameters for the torrefaction process are temperature and residence time. Both parameters are essential to designing and construction of industrial biomass torrefaction installations. Energy crops and waste coming from agricultural production have the most promising perspective from all kind of renewable energy sources in Poland. Currently, intensive studies on the process of biomass torrefaction are being carried out. In this experimental investigation, authors examined the torrefaction process of two types of agriculture biomass, such as: oats, maize. The main overarching objective of the experimental studies described below is the development of various biochar as an additive to agricultural fertilizers resulting from the conversion of biomass from agriculture residues – straw from oats and maize. The last of enumerated biomasses is treated through different conversion processes such as: drying, torrefaction to homogenize their physical and chemical properties. Among many of its areas, it is extremely important to optimize the production of biomass energy plants and its refinement (in the torrefaction process), which will improve the balance and profitability of energy production from RES, and reduce the logistics and storage costs of this fuel and improve the efficiency of biomass combustion process. When implementing new technologies indicated in this work and optimizing the harvesting of plant biomass, the negative impact on the environment caused by stored municipal waste can be reduced. This biomass torrefaction process temperature and residence time were necessary for the design and construction of semi-pilot scale biomass torrefaction installations with dryer and torrefaction reactor to perform a continuous biomass torrefaction process using superheated steam

One of the methods of initial properties of solid fuels changing by their organic mass oxidation is considered in the paper. Creation of innovative ways of intensification of existing solid fuels processing and their adoption by industry has always been and remains an actual task. Thus the chemical process is the most important stage of raw materials processing into target products. Chemical exposure allows to optimize the technological mode, expanding the scope of control of technological process parameters and, to a certain extent, modify the properties of the resulting products. The article presents the results of experimental research of influence of preliminary oxidation on the lignite organic mass from Kharanorsk and Kangalas deposits by different chemical reagents to determine a degree of this process impact on the efficiency of their processing into humic substances. Inorganic and organic oxidizers of different concentrations were used as reagents. The greatest effect for increasing the humic acids yield was observed when using 6-10 % hydrogen peroxide for oxidation, and 10 % hydrochloric acid. The results of experiments on the coal preoxidation effect can be used as a basis for the development of a new method of lignites processing into humic substances.

The co-pyrolysis performance of coal and biomass was studied and the influences of corn straw on Shengli lignite pyrolysis were discussed in this paper. The results show that corn straw has much higher activity and lower char yield than Shengli lignite during pyrolysis process. Release of moisture in blends were more occur than individual pyrolysis of Shengli lignite and corn straw. Weight loss of experimental value was lower than that of calculated value in blends. The pyrolysis process of Shengli lignite was remarkably affected by adding corn straw. There exists positive synergistic effect between Shengli lignite and corn straw in co-pyrolysis process. Corn straw could reduce the pyrolysis activation energy of SL dramatically above 350 oC.

Biogas fermentation rate is largely affected by environment temperature, causing a much more difficult production of biogas digesters in cold winter, for most regions in China. Combining the abundant solar energy resources and biomass dry anaerobic fermentation together, solar thermal energy can guarantee the production of biogas in winter. With this method, the prediction of the appropriate fermentation temperature is required. In this study, the effect of temperature on biogas fermentation was studied. To predict the fermentation temperature, a heat transfer model of biogas fermentation based on a project in city Xuzhou, which assisted with a simple solar greenhouse, was established according to the heat transfer theory. The maximum difference between the measured and calculated fermentation temperature was 2%. The effect of biogas fermentation assisted by simple solar greenhouse in typical city of different climate zones, including severe cold region, cold region and hot summer and cold winter region, was studied with the combination of heat transfer model and temperature-based biogas production rates prediction model. The results showed that, the gas production rate of biogas fermentation increases with the increase of temperature in a certain range. Assisted by simple solar greenhouse, the biogas digester temperature is increased by 6~8°C compared with the previous one, ensuring a better daily gas production rate of 0.5~0.7m3/m3 in winter.

The depletion of resources and increase in demand for fossil fuel raise concerns as it is natural and non-renewable. Therefore, it will cause limitation on its availability and continuous reduction. This issue has led to the search for more economic, sustainable, and environmentally friendly alternatives which is biodiesel. The major drawback that reduces the possibility of biodiesel commercialization is the high cost of oil feedstock as it covers 75% of its total production cost. The waste cooking oil is used as feedstock in continuous transesterification as it is the primary option to lower the cost of biodiesel production. Biodiesel can be prepared using waste cooking oil and catalyst through transesterification reaction. In this research, the focus is on the utilization of chicken and quail waste eggshell to synthesize highly active Calcium Oxide (CaO)-based heterogenous catalyst with montmorillonite clay to catalyze efficient conversion of waste cooking oil to biodiesel. The formation of CaO/montmorillonite catalyst was confirmed based on the outputs from X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). The physio-chemically characteristics of catalysts exhibited a BET surface area from the ranging from 9.2-9.5 m2/g and presence of around 87% of elemental calcium as constituent through XRF characterization. In addition to this, high-performance liquid chromatography (HPLC) analysis is used to determine the conversion of biodiesel using conventional and microwave heating method which revealed a maximum biodiesel production yield of 98%. This optimum biodiesel yield was obtained at reaction temperature, molar ratio of waste cooking oil to methanol, and catalyst amount of 60 ºC, 2 h, 1:12, 2.5 wt.% and 5 wt.% for both eggshells, respectively.

For the time being, moisture effect to the useful quality of coals has been researched comprehensively in detail. Herewith, there are a lot of unsolved problems related to the safety working out of coal layers. Presence of different forms of moisture in fossil coals essentially influences the coal layers hazardous characteristics manifestation during the mining activities. The Article deals with the results of analyses of more than thousand samples of the Donets Basin coals from different deposits, to research the relationship of total moisture and organic matter components in the coal carbonizations during the metamorphic processes. The researches have allowed separation of 3 stages for the fossil coal conversions. It is noted that at the initial stage, the carbon content is about 80%, moisture proportion in carbonization is rather high 0.36; but it decreases abruptly down to 0.12, in case of the carbon content increasing up to 86.5%. And the proportion of components (hydrogen, oxygen, nitrogen, and sulphur) total increases essentially up to 0.88. At the next stage, at 86.5÷91.5%, the components proportion in carbonization changes insignificantly. At the final stage of coal metamorphic conversions, 4-time growth of moisture proportion takes place in carbonization. It is found that moisture proportion in any form to be found in the coals shall be considered as a rank index, which is necessary to determine the coal layers hazardous characteristics. © 2021 EDP Sciences. All rights reserved.

The article studies the experimental process of cultivation of microalgae in a photobioreactor (PBR) to study the effect of technological conditions on the productivity of microalgae. This process allows obtaining initial data for the development of closed cycles of using the energy potential of alga mass in heat and power supply of various industries, including agricultural enterprises (livestock complexes, poultry farms, etc.) The scheme of a closed cycle of power supply of the cattle complex allows obtaining hot water, feed additives to the cattle ration, bio humus, motor biofuel and carbon dioxide, which is advisable to use in the process of cultivating microalgae. The experiments were carried out on a photobioreactor for cultivating microalgae with an intelligent control system. The developed photobioreactor differs from the known ones in the pulsating hydrodynamic regime of feeding the nutrient solution, which provides an increase in the productivity of the microalgae cultivation up to 15%. The experimental model of the cultivation conditions of the microalga Ch. Vulgaris on a combined diet (Tamiya medium + manure substrate) showed a noticeable increase in crop productivity when adding cattle manure extract to the nutrient medium in an amount from 30 to 60% (vol.). This can be used in the development of closed cycles of heat and power supply for cattle farms based on biofuels of the third generation, obtained from the phytomass of microalgae.

Reducing the cost of electricity consumed when cutting frozen raw materials in the meat processing industry can significantly improve profitability and other economic indicators. The possibility of energy saving in the innovative technology of one-stage fine grinding of food raw materials was studied. The selected frozen meat blocks (beef and pork) and collagen-containing raw materials (meat cuttings and tripe) were ground to the required degree usingan experimental IBF-1 grinder. At the same time, the active three-phase power consumed by the electric motor of the cutting mechanism drive was measured and recorded. The study results showed that the IBF-1 grinder (milling method) could replace three machines (frozen meat cutter, meat comminutor, and micro cutter) with sequential grinding in three stages according to the standard grinding technology. The calculations carried out on the power costs per ton of products confirm that grinding requires 2.6 times less than the total installed capacity of meatcutting machines of the standard technological chain.

The article The article examines the possibility of extracting sod fuel peat to replace imported coal. A possible raw material base is considered for producing molded solid peat-based fuel in permafrost conditions. The production of molded peat products in the form of sod peat is proposed as an option. The experimental work on drying sod peat shows that peat can be extracted and dried to standard moisture content in the conditions of northern Yakutia. A flowsheet of producing sod peat from lake peat by hydraulicking is presented. According to the flowsheet the peat mass is loosened, liquefied by lake water, sucked in by a dredger pump and pumped through a pulp pipeline to the shore, where it is dewatered in geotubes to the molding water content. After dewatering, the geotubes are cut and the peat mass is loaded into a peat spreader mixing the peat, forming it into cylindrical pieces, and spreading it on a drying field. When molded, the peat structure is modified chemically to obtain strong and durable products. Having reached sufficient strength, peat sods are piled in a stack supplied with a trench for artificial ventilation at its base. The peat is dried to a final moisture content of 24–30%.

Feed is still one of the problems in aquaculture because it takes about 70% of operational costs. High prices is caused by imported raw materials for feed production. One possible effort to overcome this problem is to find alternative local raw materials to replace imported fish meal. The purpose of this study was to examine the proximate content of shrimp shell wastes from processing shrimp crackers (Paneus sp.) to be used as shrimp flour. Samples were colledted three times in a month, at the beginning, middle and end of the month. The waste of the heads, shells and tails of the shrimp were turned into flour for laboratory testing through proximate analysis. The data were tabulated using the Microsoft Excel softwareand then analyzed descriptively by comparing the nutrient content of shrimp waste flour with the feed requirements of mariculture. The results showed that shrimp shell flour contained protein, fat, carbohydrates and ash content of around 27.4%, 2.07%, 14.84% and 47.27%. while the resulting randemen ranged from 81.75%. Therefore, shrimp shell flour can be used as an alternative raw material for preparing marine fish feed.

Wastewater treatment of machine-building enterprises contaminated with oils, petroleum products and mechanical impurities is an urgent task. A promising direction in the field of treatment of such wastewater is the use of pressure hydrocyclones and hydrocyclone installations. The article presents the results of research on the treatment of oil-containing wastewater of machine-building enterprises in pressure of hydrocyclones, conducted on an experimental hydrocyclone installation, which includes the pressure hydrocyclone under test, a sedative tank, and tanks for receiving water from the upper and lower drains of the hydrocyclone. The studies were carried out in two stages: the first stage was used to determine the diameter of the pressure of hydrocyclone suitable for the treatment of oily wastewater, and the second stage was used to study its geometric characteristics. At the first stage, seven modifications of pressure hydrocyclones with a diameter of 40 to 100 mm with different diameters of the upper and lower drain pipes were tested. A 75 mm diameter hydrocyclone is recommended for the treatment of oily wastewater. At the second stage, nine pressure hydrocyclones with a diameter of 75 mm with different diameters of the upper and lower drain pipes were tested. As a result of the experiments, the design parameters of the hydrocyclone that showed the best results were determined. The results of the research were used in the design of industrial hydrocyclone installations.

Nowadays, Indonesia is faced with an increase in human growth, and followed by increasing electricity demand. One of the environmental friendly alternative energy that can solve this problem is microbial fuel cell, which utilizes organic matter as a substrate of bacteria in carrying out its metabolic activities to produce electricity. In this study, investigated the electrical energy produced by Microalgae Microbial Fuel Cell (MMFC) using Chlorella vulgaris and “Batik” wastewater. This study aims to assess the performance of the MMFC system based on the influence of yeast (8 g L−1 and 4 g L−1), “Batik wastewater” concentration (50 % and 100 %), and graphite electrodes (1:1 and 2:2). The MMFC system was carried out by filling anode chamber with “Batik” wastewater and the cathode with C. vulgaris. MMFC simulation was operated for 7 d. Concentration of 100 % “Batik” wastewater and 2:2 number of electrodes gave the best result in MMFC with voltage 0.115 Volt, algae absorbance 0.666. The COD decreased from 824 mg L−1 to 752 mg L−1 after the MMFC. The addition of 8 g L−1 yeast gave the optimum of bioelectricity production reached 0.322 Volt and the microalgae grew until the absorbance reached 1.031.

High carbon footprints and limited availability of fossil fuels have motivated researchers to find alternatives to fossil fuels and the ways of producing them. Hydrogen is an alternative fuel and can be generated by electrohydrogenesis in a Microbial Electrolysis Cell (MEC) using wastewater. At times, the microorganisms known as exoelectrogens are added externally to the wastewater in the form of biomass. Biomass serves as a parameter to optimize the yield of hydrogen. In this research work an attempt is made to understand the effect of the biomass concentration on the substrate utilization by the exoelectrogens and product formation. This research work also aims at studying the biochemical reaction kinetics and to identify a model that best describes the kinetics of the reactions involved, at the electrodes. It was observed that on increasing the biomass concentration from 0.7g/L to 1.4 g/L, the gas liberation rate increased from 9.42 ml/day to 15.33 ml/day and substrate utilization increased from 86.8% to 94.3%. This was in close agreement with the solution of the identified model. It was found out that the energy efficiency of MEC improved substantially by 30% and the energy demand was decreased by 38.5% when the initial biomass concentration was doubled.

The development of new detergent agents is mainly due to the creation of new compositions of chemical agents, which increases their cost. The article presents the results of production tests of the previously developed disinfection modes for refrigerators “Giponat BPO”. As a result of the production tests, it was found that the disinfectant “Hyponat BPO” provides 100% disinfection of refrigerated chambers, as well as auxiliary equipment at meat processing plants. Thus, it was found that the positive effect of surface disinfection when controlled by a test culture of E. coli was achieved by the use of a 2% solution with an exposure of 30 minutes, staphylococcus with a -3% solution and an exposure of 50 minutes and when controlled by a TMC -4% solution and an exposure of 60 minute.

The daily needs of energy in remote areas, Indonesia, is dominated by biomass waste. The abundant types of biomass waste for heat transfer is empty fruits shell (EFS) of oil palm as briquette. This research discussed a brief analysis of oil palm shell by using physical treatment at different crushing pressure. It was also to examine the adequate size of particle for improving the heating value of briquette. The crushing pressure had a height dimension of 20 cm, as well as the briquette mold with a diameter of 2 cm and a height of 1 cm. The oil palm shell which was applied physical treatment at different crushing pressure of 400 J, 550 J, and 700 J, that resulted in particle size is smaller than 800 µm, 800 µm to 1 700 µm, 1 700 µm to 2 000 µm, and bigger than 2 000 µm. The adequate size of particle for briquette was found to be < 800 µm, which reached the heating value of 20 042.32 J g–1 and ash residue of 20 %. This study showed the advantages of oil palm shell briquette by using physical treatment is suitable and sustainable alternative to daily life use in Indonesia.

There has been made the assessment of the product «CAVITA BIOCOMPLEX» quality parameters, manufactured according to the innovative technology of ultrasonic cavitation processing of peat in water medium at high static pressure. To carry out this assessment it has been used the universal system of procedure of comprehensive assessment of humic products. This system is based on the level approach. It was found that the sample of agro product in the capacity of the main bioactive components contains fulvic and humic acids (47.2-64.0% calculated at dry weight basis). It is chemically and biologically safe for the environment. The usage of high-quality natural raw materials in combination with the “green” technology of “CAVITA BIOCOMPLEX” production makes it possible to use it not only as additional application with any mineral or organic fertilizers, plant protection products, herbicides, but also as basic fertilizer for biological agricultural technologies.

Biomass from palm empty fruit bunch (EFB) is considered as potential renewable energy sources to be developed in Indonesia. Palm EFB can be efficiently converted into valuable and useful methanol products through gasification. Research about methanol synthesis from various biomass has been done. However, Little research about methanol production based on palm empty fruit bunch gasification has been found, and no research yet on technoeconomic analysis of methanol plant construction based on palm empty fruit bunch gasification. The purpose of this research is to find early-stage feasibility of small-scale methanol plant model based on gasification of palm EFB. Method methanol plant design, investment cost estimation, operating cost estimation, and calculation to estimate profitability in terms of economic feasibility parameters. Economic analysis calculated that the total investment to build a methanol plant in this study was USD 87 508 479 with manufacturing cost per annum USD 6 127 014. Net Present Value (NPV) calculated was USD -51 721 064 and IRR at 1.1 %. Based on NPV and Internal Rate of Return (IRR) value, the construction of methanol plant is not feasible. Feasibility predicted to be obtained when the capacity of the plant increased fivefold.

POME or palm oil mill effluent is currently still a waste problem that has not been utilized optimally. POME waste has the potential for renewable energy in the form of biogas, but some research results have shown that production is not optimal, so the addition of cow dung needs to be done to increase biogas production because methanogen bacteria found in cow dung help to maximize the anaerobic fermentation process and methane production. This research was conducted to determine the potential for biogas production from a mixture of POME and cow dung for 25 days by conducting a study of the biogas production process. The results of this study indicate that the biogas pressure increases with the addition of the loading rate, which is 101.102 N/m2/day to 101.107 N/m2/day with a daily biogas production of 0, 24247 liters/day with a total accumulation of biogas production for 25 days of 6.1 liters.

Coal preparation currently has a number of significant problems concerning the dewatering processes (water purification, coal sludge thickening). These processes polymeric flocculants are used to their enhancement. To select a floculant for its further use at the preparation plant is currently a quite complicated and mainly empirical process. The authors have conducted research in order to establish a possibility to recommend certain flocculants to be chosen based on the properties of coal pulp, that were established during the experiments, and the properties of the aforementioned flocculants. In this paper are listed the methods, that were used during the research, the results of the laboratory tests of anionic flocculants Magnaflock, that were conducted on various coal pulp samples with various properties. The industrial testing of the selected flocculant at the coal preparation plant “Anzherskaya” was examined in detail. After the analysis of the obtained results certain conclusion was conducted.

The paper analyses the impact of biochar on the volumetric density of the soil, with simultaneous fertilization with an agricultural biogas plant digestate. For the purpose of the research, 10 experimental fields were prepared for the study, in accordance with good agricultural practice. To verify the results, a single-factor variance analysis was performed, which demonstrated a significant differentiation between the dosing of the biochar and the values of the volumetric density of the soil. Using the digestate simultaneously with the biochar addition further increased the disparity in the soil’s volumetric density between the respective biochar doses.

Ecotoxic elements include the ones which have a negative impact on human health and the environment, among others, mercury, arsenic and lead. Hard coal is a fuel which contains significant amounts of ecotoxic elements and the processes of coal combustion, coking and gasification are one of the main sources of their anthropogenic emission. In the coking process, individual ecotoxic elements in various proportions remain in coke and are released to the raw coke oven gas. During the cleaning and cooling of coke gas, ecotoxic elements are distributed between purified coke gas and other coking byproducts. In the paper, the measurement results of the contents of selected ecotoxic elements in the Polish coking bituminous coals are presented, i.e. mercury, arsenic and lead. The examination results of their content in the products of the coking process i.e. coke, coal tar, BTX, sulfur, and purified coke oven gas are also shown. Coke is characterized by a much lower content of mercury and lead than coal, and by a similar content of arsenic. Among the coking products, sulfur and tar are characterized by the highest content of mercury. Coal tar also contains a high amount of lead.

The significance of the paper is confirmed by the need to replace petroleum motor fuels with fuels produced from alternative energy sources. Biofuels derived from various vegetable resources are considered as promising alternative fuels for diesel engines. These fuels offer significant advantages with respect to the renewability of their raw materials and good emission performances when burned in ICEs. The main problem of using vegetable oils as biofuels for diesel engines is their high viscosity. This problem can be resolved by using mixed biofuels with the addition of gasoline. The analysis of physico-chemical properties of petroleum diesel fuel (DF) and mixed biofuels containing petroleum DF, rapeseed oil (RO) and AI-80 automotive gasoline was conducted. Experimental studies of the D-245.12S diesel fuelled with these mixed fuels were carried out. The mixed fuels were prepared from 80% DF + 20% RO, from 75% DF + 20% RO + 5% AI-80, and from 70% DF + 20% RO + 10% AI-80. It was shown that the addition of gasoline to mixed biofuels could improve two main toxicity indicators of exhaust gases exhaust gases smoke and emissions of nitrogen oxides. The best emission performance was achieved for the mixture of 70% DF, 20% RO and 10% AI-80. When the diesel engine was switched from the mixture of 80% DF and 20% RO to the mixture of 70% DF, 20% RO and 10% AI-80, the exhaust gases smoke at maximum torque mode decreased from 17.5 to 14.5% on the Hartridge scale, i.e. by 17.1%. The specific emissions of nitrogen oxides decreased from 6.559 to 6.154 g/(kW·h), i.e. by 6.2%.

The increase in energy consumption is observed since the middle of the 20th century. At the same time, the International Energy Agency (IEA) forecasts a 50% increase in energy consumption by 2030. One of the ways to reduce the consumption of such fuels are small additions received from natural gas and renewable energy sources. Mixtures of alcohols with gasoline and diesel oil are produced. Their small additions allow for a certain share of energy from renewable sources without a noticeable change in the combustion characteristics of such fuels. The paper presents the studies on the evaporation of drops of gasoline with a total composition CnHn+2, where n = 5 to 7. Its components are distillation products of crude oil with a low flash point. It is a colourless liquid mixture which main components are: n-heptane, neohexane and cyclopentane. The evaporation characteristics of such a drop with the addition of ethanol are also given. The result of the conducted research is the loss of mass during the drop carried above the surface with temperature above the Leidefrost point.

The research takes low C/N ratio and high ammonia nitrogen sewage as the treatment object, connects the SBBR reactor and UASB reactor after stable operation in series, and studies the PN-ANAMMOX coupling mechanism. The research analyze the effect of the influencing factors of the nitrification process on the subsequent anaerobic ammonia oxidation stage. The two stages adapt to each other that constantly debug and run. The research investigate its denitrification effect, analyze the biological denitrification mechanism and determine the optimal working conditions.

This study combined biofilm method and A/O process reasonably to form the biological treatment system. This experiment focused on the performance of the system for domestic sewage according to the determination of CODCr, ammonia nitrogen, total nitrogen, and total phosphorus. The A/O-mixed carrier system had a good removal effect on organic pollutants for simulated domestic sewage. At the start-up period, the average removal rates of CODCr, ammonia nitrogen and total nitrogen were 92%, 90% and 55%, respectively. But the removal effect of total phosphorus was not ideal.

The working characteristics of a laboratory ball drum mill during grinding of Karaganda coal products were studied in order to apply the results obtained to industrial installations. The performed analysis shows that the most complicated and energy-intensive stage of preparation of coal dust is the grinding of fuel. The operational characteristics of the mill productivity, consumed electric power and specific energy consumption in terms of the relative rotational speed of the drum as well as the optimal values of the relative velocity determining the qualitative grinding of the fuel have been determined. The performance of the processed drum mill reaches its maximum at a relative speed of rotation of the drum 0.71 ensuring a waterfall mode of grinding of fuel related to the high-speed mode of a coal-grinding mill. The estimated specific energy consumption for fuel grinding varies in the range from 0.11 kWh/kg up to 0.23 kWh/kg at fuel milling coefficient of Kl = 1.2.

Growing demand for energy and care about natural environment is the motivation to find alternative sources of energy. One of them is biomass from cherry and morello cherry stones, which is food processing industry waste. Stones have fairly good physical properties regarding material for combustion. Cherry and morello cherry crop in Poland is at the level of 200 thousand tons yearly, and processing them generates a considerable amount of waste that consists of stones, which may be used for energy purposes. In the work, the initial water content (u), curves of combustion in different temperatures, percentage ash content, heat of combustion and percentage share of stone in the whole fruit were determined.

Biomass is a central issue as new material that can be used as a substrate to produce biofuels, it has become global research to replace liquid fossil fuels with alternative renewable and sustainable fossils. Palm oil mill effluent (POME) is the potential of Agri-industrial waste to be used as alternative energy with anaerobic digestion of high concentration organic wastewater can be used for bioethanol production to replace food as raw material. Bioethanol can be produced in acidogenic steps in the organic degradation process. In this research, bacterial mixed cultures sourced from bovine rumen as biomass and the substrate used was palm oil mill effluent (POME) with a characteristic COD concentration of 25,600 mg/L, The operation of the reactor is set at pH 5; 6; 7 for 72 hours with the type of anaerobic circulating batch reactor (CBR), measurement of bioethanol products and acidogenesis of samples is carried out every 6 hours. The results showed that the reactor with variations in pH conditions 5 gave the highest efficiency of bioethanol formation in the 12 hour running process, result is 102,94 mg/L with a maximum formation rate of 9,98 mg/L/hour.

Increased rice production in Indonesia not only brings good news socially and economically, but also brings bad news for environmental ecology. In each rice crop produces 50% rice straw and 50% grain. The grain is divided into two again, namely 80% rice and 20% rice husk. In 2018, counted the rice husk up to 10,379,625 tons, a fantastic number if cannot be managed properly so that it can pollute the environment. One alternative to deal with the high rice husk is through conversion to biogas. Biogas is an energy that is formed under anaerobic conditions with organic material so that it is also called renewable energy. The development of research on biogas production from rice husks based SS-AD has experienced a positive increase in hardness. Studies have been conducted on the pre-treatment to other influencing factors. But after the authors describe the latest development of biogas research from rice husk, there are still some variables that have not been tested such as physical treatment, the influence of temperature, pH and alkalinity. Based on this review, further research is needed to complete a number of variables that have not been carried out so that it is expected that the development of biogas production from rice husk based SS-AD can move toward larger scales such as pilot scale and industrial scale.

Treated municipal wastewater produced in Kuwait is used mainly in agricultural and landscape irrigations. However, there are strong doubts that severe sludge bulking and foaming problems, particularly during winter seasons, may render this water unsuitable for irrigation purposes. To assess the impact of these problems on the quality of irrigation water in Kuwait, samples of secondary and tertiary effluents and sludge-mixed liquor were collected weekly from two wastewater treatment plants for nine months. Routine wastewater quality parameters were then determined for the collected influent and effluent samples. Further, dominant filamentous bacteria in the sludge-mixed liquor samples collected from the aeration tanks were also identified and quantified using a molecular method called Vermicon Identification Technology (VIT). Obtained results of the effluents’ qualities were then statistically analyzed and compared to Kuwait’s irrigation water standards. Statistical results indicated that secondary effluents were greatly impacted by sludge bulking and foaming problems, while tertiary effluents were slightly affected. This finding highlights the importance of having tertiary treatment units in plants to encounter sludge bulking and foaming problems.

Hydrogen is one of the clean energy carriers and it is obtained from fossil and renewable energy sources and waste of the food industry. In this study, whey, which is the waste of the cheese factory, was gasified using a high-pressure batch reactor at different temperatures (300, 350, 400 ºC) and an updraft tubular reactor at (650, 700°C). In order to find out suitable gasification conditions, the effect of reaction parameters such as catalyst type (K2CO3 and NaOH), temperature (300-700 °C) and time (30-120 min) were investigated. The highest hydrogen yield (14.47 mol H2/kg Whey Powder-2) was obtained with 2.51 M NaOH at 120 min. reaction time at 400 °C.

This paper shows designed coupler on paper-substrate with Substrate Integrated Waveguide (SIW) techniques. Types of paper-substrate that used are photographic paper. The rectangular coupler is presented with Substrate Integrated Waveguide (SIW) which metallic via on paper-substrate. The structures of the coupler are designed and analysed using Computer Simulation Tools (CST) Studio Suite 2014 Software. This designed coupler operating within frequency of 3.8-5 GHz. The paper-based substrates are permits the implementation of green materials (Eco-friendly) technology. The design of the coupler and its simulated results are reported in this paper.

Ion implantation is a technique which is widely used in industry for unique modification of metal surface for medical applications. In semiconductor silicon technology ion implantation is also widely used for thin layer electronic or optoelectronic devices production. For other semiconductor materials this technique is still at an early stage. In this paper based on literature data we present the main features of the implantation of CdTe single crystals as well as some of the major problems which are likely to occur when dealing with them. The most unexpected feature is the high resistance of these crystals against the amorphization caused by ion implantation even at high doses (10 17 1/cm 2 ). The second property is the disposal of defects much deeper in the sample then it follows from the modeling calculations. The outline of principles of the ion implantation is included in the paper. The data based on RBS measurements and modeling results obtained by using SRIM software were taken into account.

An effort to obtain alternative energy is still interesting subject to be studied, especially production of biogas from agriculture waste. This paper was an overview of the latest development of biogas researches from rice husk waste by Solid State Anaerobic Digestion (SSAD). The main obstacle of biogas production from rice husk waste was the lignin content which is very difficult degraded by microbes. Various pretreatments have been conducted, either physically, chemically as well as biologically. The SSAD method was an attractive option because of the low water content of rice husk waste. The biogas yield by SSAD method gave more attractive result compared to Liquid Anaerobic Digestion (LAD) method. Various studies were still conducted in batch mode laboratory scale and also has not found optimum operating conditions. Research on a larger scale such as bench and pilot scale with continuous systems will be an increase trend in the future research.