Search

Accurate quantum dynamics simulations of nonadiabatic processes are important for studies of electron transfer, energy transfer, and photochemical reactions in complex systems. In this comparative study, we benchmark various approximate nonadiabatic dynamics methods with mapping variables against numerically exact calculations based on the tensor-train (TT) representation of high-dimensional arrays, including TT-KSL for zero-temperature dynamics and TT-thermofield dynamics for finite-temperature dynamics. The approximate nonadiabatic dynamics methods investigated include mixed quantum–classical Ehrenfest mean-field and fewest-switches surface hopping, linearized semiclassical mapping dynamics, symmetrized quasiclassical dynamics, the spin-mapping method, and extended classical mapping models. Different model systems were evaluated, including the spin-boson model for nonadiabatic dynamics in the condensed phase, the linear vibronic coupling model for electronic transition through conical intersections, the photoisomerization model of retinal, and Tully's one-dimensional scattering models. Our calculations show that the optimal choice of approximate dynamical method is system-specific, and the accuracy is sensitively dependent on the zero-point-energy parameter and the initial sampling strategy for the mapping variables. [ABSTRACT FROM AUTHOR]

The electromagnetic environment faced by modern radar is becoming increasingly complex. One effective means to improve the performance of radar systems is testing in an anti-jamming ability test chamber, where the increased complexity has also led to higher performance requirements for radar jamming simulators. Based on the requirements for modern radar system testing, this paper presents a study of a large-bandwidth real-time radar jamming simulator and describes its overall design architecture; the simulator covers the L-Ku and Ka frequency bands and the instantaneous bandwidth is ≥2 GHz, which means that the system is able to simulate 11 interference patterns. Synchronous control of the system is realized in 1 ms through use of the reflection memory interrupt mechanism, the synchronous pulse signal mechanism, synchronous timing design, and a real-time control software architecture. An overall design scheme for real-time simulation of a radar target jamming echo is given and baseband signal processing resources are saved through information preprocessing, a large-capacity high-speed storage board is designed to improve the data reading speed, a multiphase filtering structure is used to achieve high sampling rates and save hardware resources, and a high-speed parallel computing method is used to improve computing efficiency; the actual measured baseband signal processing time is less than 500 ns. Finally, a measurement platform is built, and the main interference patterns are verified through experimental measurements. [ABSTRACT FROM AUTHOR]

In this work, a chemical vapor deposition (CVD) method was developed for the synthesis of transition metal dichalcogenide alloy monolayers, with a composition gradient in the radial direction. The composition gradient was achieved by controlling the substrate cooling rate during the CVD growth. The two types of alloys, namely, WS2(1−x)Se2x and MoS2(1−x)Se2x, were found to exhibit an opposite composition gradient. This is attributed to their different cohesive energies. A two-dimensional Ising model is used to explain the growth mechanism, where two ends of the composition were modeled as a magnetically ordered phase and a paramagnetic phase. The composition as a function of substrate temperature is then represented by the thermal magnetization curve. [ABSTRACT FROM AUTHOR]

We studied the optical properties of a composition graded WS 2 (1 − x) Se 2 x alloy monolayer. A symmetric gradual composition gradient from a Se-rich center to the relatively less Se-rich edges of an equilateral triangle shaped flake is confirmed by Raman mapping. Photoluminescence (PL) mapping shows a large 100 meV variation in the exciton energy, resulting from the composition dependent bandgap variation and carrier localization. The alloying leads to symmetry breaking and large nonlinear optical susceptibility. Second harmonic generation (SHG) mapping was carried out to study the non-linear properties and additionally to determine the lattice strain of the alloy flake. In contrast to PL and Raman mappings, SHG intensity is found to be spatially uniform. However, polarization dependent SHG reveals a unidirectional strain parallel to the (zigzag) edge of the flake, in addition to the sixfold symmetry expected from the transition metal dichalcogenide (TMD) lattice. Our results suggest potential applications of composition graded TMD alloys as ultra-compact color-tunable light sources and miniaturized spectrometers. [ABSTRACT FROM AUTHOR]

Frequency measurement is one of the key techniques in high-precision data acquisition technology of broadband signals. Generally, frequency measurement not only needs to deal with a large amount of data processing but also requires a high precision, but these two aspects are sometimes difficult to reconcile. Some algorithms are overly dependent on the accuracy of the to-be-measured data, which might not be the desired option for real projects since it is almost impossible to get ideal error-free data. This article adopts a frequency measurement method based on the coordinate rotation digital computer algorithm, differential algorithm, and Kalman filter. The use of these algorithms for the frequency measurement process would not only simplify the calculation but also reduce the effect of the measurement error. This method can measure all signals that satisfy the sampling theorem and can also measure multi-channel parallel signals. The experimental results of data simulation and actual measurement on the hardware platform show that the accurate frequency measurement algorithm has a strong data processing ability, stable measurement, and steady improvement in the accuracy of measurement results, which can meet the needs of most instruments for accurate frequency measurement. The measurement error could be reduced to the percentile by the Kalman filter and could be reduced to below the thousandth by the combining the algorithms. [ABSTRACT FROM AUTHOR]

We report unconventional thermoelectric power (Seebeck coefficient, S) in L10 structured FePt films. The temperature dependence of S can be well fitted by a phenomenological expression consisting of electron diffusion and magnon-drag contributions. Interestingly, the magnon drag coefficient carries an opposite sign to that of electron diffusion, revealing a dominant contribution from the elusive electron-magnon Umklapp scattering. Density-functional theory calculations identify several bands crossing the Brillouin zone boundaries, facilitating the Umklapp process. The large spin–orbit coupling in FePt results in strong mixing of majority and minority spins among some of those bands, greatly enhancing the electron-magnon scattering. [ABSTRACT FROM AUTHOR]

For wideband receiver systems, it is challenging to compensate the in-phase/quadrature (I/Q) phase mismatch by traditional methods, especially with a time delay deviation (TDD) between the I/Q channels. Considering the above situation, this paper proposes a full-scale I/Q phase imbalance model concerning TDD. The model divides phase mismatch into two parts, i.e., the linear phase (LP) part and the nonlinear phase part, and compensates each part with the corresponding compensation module separately. The design strategy of the compensation module is innovatively transformed into a constrained nonlinear optimization problem, and a metaheuristic algorithm, the flower pollination algorithm (FPA), is utilized to be the optimizer. The results of the contrast simulation with the LP elimination method show the efficiency of the proposed method. In addition, the superiority of the FPA-based structure is verified by comparing with other metaheuristic algorithms, the artificial bee colony technique, the bat algorithm, and the differential evolution algorithm, in terms of the compensation accuracy, algorithm stability, runtime consumption, and convergence performance. Ultimately, the image rejection ratio improvement on the actual platform after compensation is measured, which validates the proposed compensation structure and the corresponding optimization method practically, and the FPA is still the best choice among the competent optimizers. [ABSTRACT FROM AUTHOR]

Thermoelectric measurements detect the asymmetry between the density of states above and below the chemical potential in a material. They provide insights into small variations in the density of states near the chemical potential, complementing electron transport measurements. Here, we report combined resistance and thermoelectric power measurements of vanadium dioxide (VO2), a prototypical correlated electron material, under ionic-liquid (IL) gating. We show that under our gating conditions, the charge transport below the metal-to-insulator-transition (MIT) temperature remains in the thermally activated regime, while the Seebeck coefficient exhibits an apparent transition from semiconducting to metallic behavior. The contrasting behavior indicates changes in the electronic structure upon IL gating, due to the formation of oxygen defect states. The experimental results are corroborated by numerical simulations based on a model density of states incorporating a gating-induced defect band. Our study reveals thermoelectric measurements to be a convenient and sensitive probe for the role of defect states induced by IL gating in suppressing the MIT in VO2, which remains benign in charge transport measurements, and possibly for studying defect states in other materials. [ABSTRACT FROM AUTHOR]

Light-induced domain reversal of near-stoichiometric Mg-doped LiNbO3 crystal was investigated with a focused 532 nm continuous laser beam. The lowest electric field applied to accomplish domain nucleation is only 30 V/mm and 1/80 of the coercive field, which is safe and convenient for us to fabricate domain structures. Under this superlow applied field, the pinning effect of domain wall is so obvious that the inverted domain reveals a gear shape contrary to the hexagon in a higher applied field. Then two-dimensional domain patterns with the smallest domain size of 4 μm have been fabricated. [ABSTRACT FROM AUTHOR]

We report the magnetotransport properties of self-assembled Co@CoO nanoparticle arrays at temperatures below 100 K. Resistance shows thermally activated behavior that can be fitted by the general expression of R∝ exp{(T0/T)ν}. Efros–Shklovskii variable range hopping (ν=1/2) and simple activation (hard gap, ν=1) dominate the high and low temperature region, respectively, with a strongly temperature-dependent transition regime in between. A giant positive magnetoresistance (MR) of >1400% is observed at 10 K, which decreases with increasing temperature. The positive MR and most of its features can be explained by the Zeeman splitting of the localized states that suppresses the spin dependent hopping paths in the presence of on-site Coulomb repulsion. [ABSTRACT FROM AUTHOR]

We present magnetization data for polymer-mediated, self-assembled films of 4 nm FePt nanoparticles with thicknesses between one and four nanoparticle layers. As synthesized and deposited, the assemblies contain weakly magnetic material whose volume is equivalent to an outer 0.5 nm shell of the nanoparticles. During a 580 °C anneal, this material is incorporated into the magnetic domains of the nanoparticles. The fraction of nanoparticles transformed by annealing into ferromagnetic L1[sub 0] FePt, the structure essential for magnetic storage applications, is found to vary with sample thickness; samples thinner than four nanoparticle layers show no significant fraction of ferromagnetic (at 300 K) L1[sub 0] structured nanoparticles under these annealing conditions, while in films comprised of four nanoparticle layers, less than half of the particles are ferromagnetic at 300 K. Possible causes of these observed results are discussed. © 2004 American Institute of Physics. [ABSTRACT FROM AUTHOR]

The main objective of this work is to comprehensively provide a fundamental understanding of the entire process of the flame-pressure wave interactions with end-gas autoignition and detonation development in a confined chamber by two-dimensional numerical simulations with a stoichiometric hydrogen/air mixture. The flame dynamics, pressure wave propagation, and its structure evolution, together with the mechanism of autoignition and detonation development in the end gas, are analyzed in detail. Six stages, including spherical flame, finger flame, flame with its skirt touching the sidewalls, flame-pressure wave interactions, end-gas autoignition induced by the flame-pressure wave interactions, and detonation development, are observed for the flame development in the confined space. The results demonstrate that the flame-pressure wave multi-interactions result in violent oscillations of the flame shape and speed. Three stages of flame shape evolution during each interaction, backward propagation of the flame front, stretch of the flame front at the boundary layer, and formation of the tulip flame, are captured. A new mechanism in terms of combined effects of the viscous boundary layer and pressure waves is provided for the formation of the tulip flame. It is also found that the velocity distributions in the boundary layer show the trend of increase first and then decrease after the pressure waves pass the fields twice in the opposite directions. The autoignition occurrence and detonation initiation at different positions and different moments in the end-gas region are analyzed. It is indicated that the nonuniform temperature distribution induced by the reflections of pressure waves and the specific pressure wave structures can be responsible for this phenomenon. [ABSTRACT FROM AUTHOR]

DC offsets in a quadrature mixing structure will affect the system performance. This paper proposes a Hilbert transform-based algorithm to blindly calibrate the DC offsets by filtering the inphase and quadrature signals with the same Hilbert filters. Compared with the traditional averaging-based method, this method consumes less time and resources. Moreover, the proposed method need not interrupt analog-to-digital converter's conversion, featuring the characteristics of high efficiency and good real-time performance. The Matlab simulation results verify the correctness of the proposed algorithm, and finally, an experimental platform is designed in detail to verify the practicability of this blind calibration algorithm. [ABSTRACT FROM AUTHOR]

Because of the exponential increase of sampling rate, time-interleaved analog-to-digital converter (TIADC) has a fast growth in the high-speed applications. However, the channel mismatch error is a serious challenge for the performance of TIADC. In this article, we address the timing skew mismatch error and propose a novel adaptive calibration method. The principle and operating process of the calibration algorithm are explained. To validate the proposed technique, we designed a four-channel TIADC-based digital oscilloscope with a sampling rate of 10 GS/s. Based on this instrumentation platform, (i) calibration algorithm was implemented by hardware; and (ii) a test platform consisting of advanced instruments and tools was setup to testify the effect and robustness of proposed algorithm. Moreover, the technical details of instrumentation are described for the first time. The experimental results show that the calibration algorithm significantly suppresses the distortions due to timing skew mismatch error. The TIADC-based instrumentation achieves spurious-free dynamic range of 52.48 dB and effective number of bits of 5.83 bit, respectively. Besides, the complexity of the proposed algorithm is compared and discussed. [ABSTRACT FROM AUTHOR]

The main factors that enable capture of complex and transient signals in real-time are improved sampling rates and processing speeds. The time-interleaved architecture is an effective method that allows systems to break through the speed bottleneck of single analog-to-digital converters (ADCs) and go beyond the state-of-the-art process technology limit. However, the performance of the acquisition system may be reduced because of the offset, gain, and time mismatch errors that occur in time-interleaved ADC systems. To correct these errors, this paper first proposes a self-adaptive correction algorithm and then introduces real-time solutions for this algorithm. Finally, the proposed calibration method is implemented in a digital phosphor oscilloscope. Simulations and experimental testing indicate that this system shows good real-time performance and provides a high dynamic performance with an effective number of bits of 7.3 bits and a signal-to-noise ratio of 45.5574 dB. [ABSTRACT FROM AUTHOR]

Electromagnetic interference (EMI) measurement is essential in wireless communications to avoid both performance degradation and serious fault failures. In this paper, we present the design of an acquisition system for a time-domain EMI measurement receiver intended for monitoring potential EMI. The platform consists of both hardware and software systems. The hardware system is constructed using a modular design method and contains a conditioning module, a data acquisition and processing module, and a clock generation module. The software system provides an interactive interface for device operation and offers an automatic sampling/processing procedure that is developed on a slot 0 controller. An additional outstanding feature of the proposed system is its high dynamic range. We propose a novel multi-stage architecture and a data reconstruction algorithm that are combined to achieve large dynamic range acquisition. The proposed acquisition architecture breaks through the dynamic range limitations of conventional analog-to-digital converters (ADCs) on a significant scale. The implemented system is able to capture an analog waveform with a 300 MHz bandwidth and a 1 GS/s sampling rate. The experimental results show that the maximum dynamic range achieved is 96.43 dB, which is far greater than the single ADC dynamic range of 52 dB. [ABSTRACT FROM AUTHOR]

The wideband signal transceiver module forms the core component of the radar signal target simulator and the key module in measuring the Doppler shift. In this paper, we present a design for a miniaturized wideband signal transceiver module based on a PXIe bus, with an operating frequency range of 65 MHz–3 GHz, an instantaneous measurement bandwidth of 800 MHz on a standard 3U (where 1U = 4.445 cm) board with three slots. The module adopts a zero intermediate frequency transceiver, and the baseband uses two analog to digital converters, a field programmable gate array, and two digital to analog converters as the core hardware architecture. The module combines key technologies including variable-frequency local oscillator synthesis, radio-frequency broadband signal conditioning, and high-speed high-resolution baseband signal acquisition and generation. This paper describes a novel design for the Doppler shift function. Considering the limited size and volume of the module, Doppler shift technology combining a complex signal and a real signal was adopted to achieve full band coverage with an operating frequency range of 65 MHz–3 GHz. We verified that this module could generate the Doppler shift in the frequency band from −400 Hz to 400 Hz in steps of 2 Hz and with an error of ±2 Hz. [ABSTRACT FROM AUTHOR]

Memory depth represents an oscilloscope's capability to continuously acquire and store sampling points at the highest real-time sampling rate. Improving the memory depth is conducive to improving the system's capability to analyze waveform details, but it will slow down the response time of the system. This paper proposes a high-speed deep memory data acquisition system with a real-time sampling rate of up to 10 GSPS and a memory depth up to 1 Gpts based on ultra-high-speed parallel sampling, waveform quick positioning and zooming, and waveform 3D mapping and display. This study focuses on the use of waveform quick positioning and zooming techniques under deep memory conditions to solve the slow response time and low waveform capture rate that are the result of improving the memory depth. This paper gives the experimental results for real-time signal data acquisition. The results show that adopting waveform quick positioning and zooming techniques achieved the following aims: significantly improved system response time, rapid positioning and display waveform details available to users, fast waveform capture rate and improved oscilloscope performance. [ABSTRACT FROM AUTHOR]

Carrier-dopant exchange interactions in Mn-doped PbS colloidal quantum dots were studied by circularly polarized magneto-photoluminescence. Mn substitutional doping leads to paramagnetic behavior down to 5 K. While undoped quantum dots show negative circular polarization, Mn doping changes its sign to positive. A circular polarization value of 40% was achieved at T = 7 K and B = 7 tesla. The results are interpreted in terms of Zeeman splitting of the band edge states in the presence of carrier-dopant exchange interactions that are qualitatively different from the s,p-d exchange interactions in II-VI systems. [ABSTRACT FROM AUTHOR]

The hard magnetic properties of Fe3Se4 nanostructures were studied both experimentally and theoretically. Magnetic measurements showed that Fe3Se4 nanoparticles can exhibit giant coercivity exceeding 40 kOe at low temperature (10 K). This unusually large coercivity is attributed to the uniaxial magnetocrystalline anisotropy of the monoclinic structure of Fe3Se4 with ordered cation vacancies. The measured anisotropy constant is 1.0 × 107 erg/cm3, consistent with the result from first-principles calculations. The magnetization reversal mechanism of the nanoparticles is found to be incoherent spin rotation. [ABSTRACT FROM AUTHOR]

Recently, light-induced domain reversal has been developed to a promising method for domain engineering, but the depth of reversed domain is only of several tens of microns, which greatly limits its practical applications. In this Letter, we fabricated domain patterns on the -z face of 1.0 mol % Mg doped near-stoichiometric lithium niobate with the assistance of a focal 532 nm laser, and then succeeded to transcribe these domain patterns from the -z to the +z face by applying external field without laser illumination. The transcribed domains have much larger depths, can sustain more than 100 times of the transcription cycles without large deformation, and can be erased by one transcription cycle with illumination of 532 nm laser. Finally, a light-induced ferroelectric domain transcription model was proposed. [ABSTRACT FROM AUTHOR]

Ordered FePt nanodot arrays with extremely high density have been developed by physical vapor deposition using porous alumina templates as evaporation masks. Nanodot diameter of 18 nm and periodicity of 25 nm have been achieved, resulting in an areal density exceeding 1×1012 dots/in.2. Rapid thermal annealing converts the disordered fcc to L10 phase, resulting in (001)-oriented FePt nanodot arrays with perpendicular anisotropy and large coercivity, without the need of epitaxy. High anisotropy and coercivity, perpendicular easy axis orientation and extremely high density are desirable features for future magnetic data storage media applications. [ABSTRACT FROM AUTHOR]

Publisher's Note: "An adaptive calibration technique of timing skew mismatch in time-interleaved analog-to-digital converters" [Rev. Sci. Instrum. The initially-published version incorrectly identified the university of first affiliation, the "University of Electronic Science and Technology of China", as the "University of Science and Technology of China", which is a different institution. All online versions of the article were corrected on 21 November 2019. [Extracted from the article]

Self-assembly of FePt and Fe[sub 3]O[sub 4] nanoparticles of different sizes led to various FePt-Fe[sub 3]O[sub 4] nanocomposites. Annealing the composite under reducing atmosphere at 650 and 700 °C induced magnetically hard FePt phase and magnetically soft Fe[sub 3]Pt phase. The FePt and Fe[sub 3]Pt phases were either linked by a common interface or coexisted within one grain as domains with sizes <10 nm. This ensures the effective exchange coupling of magnetically hard and soft phases. High-resolution transmission electron microscopy studies provide detailed structural characterization for the FePt based nanocomposites. [ABSTRACT FROM AUTHOR]

The article presents the authors' response to their article "Inversed tunneling magnetoresistance in hybrid FePt/Fe3O4 core/shell nanoparticles systems," which appeared in a 2011 issue. The authors argue that their mechanisms for the inversion of magnetoresistance (MR) in FePt/Fe3O4 core/shell nanoparticles system are the resonant tunneling via localized states. The authors emphasize that the comparison of the inversed MR not observed for other interface combinations is irrelevant.

We have produced exchange-coupled FePt nanoparticle assemblies by chemical synthesis and subsequent thermal annealing. As the interparticle distances decrease by tuning the annealing conditions, interparticle interactions change from dipolar type to exchange type, and the magnetization reversal mechanism switches from rotation controlled to domain-nucleation controlled. With increasing annealing temperature, the coercivity first increases due to improved chemical ordering, and then drops significantly, resulting from excessive interparticle exchange coupling. For the samples exhibiting exchange coupling, both the remanence ratio and coercive squareness increase. © 2002 American Institute of Physics. [ABSTRACT FROM AUTHOR]

The digital channelization technology has been applied in many electronic areas, and the real-time broadband spectrum analysis has been the research hotspot in the area of signal processing. This paper introduces the channelized broadband signal spectrum analysis method. Based on the weighted overlap-add (WOLA) structure, this method divides the input broadband signal into several sub-bands or channels, and then downconverts and decimates the sub-band signals to obtain the baseband signals with a low sampling rate. The spectrum analysis results of the input broadband signal are achieved by conducting further decimation, fast Fourier transform and spectrum splicing to the baseband signals. The Matlab simulation results verify the correctness of the WOLA structure, and finally, an experimental platform is designed in detail to verify the practicability of this broadband spectrum analysis method.

Jitter which quantifies the quality of a clock is an important specification. It is of great significance for an electronic system. To obtain a good signal-to-noise ratio for sampling systems, there must be clocks with low jitter performances. By using the relationship between jitter and phase noise, the 100 MHz clock generating circuit with ultra-low jitter and phase noise characteristics are studied in this paper. Bipolar junction transistor with low noise figure and low corner frequency should be selected. Inductance and capacitance in the feedback circuit are obviously the main contributions to the jitter. Impacts of the loaded quality factor (Q(L)) of the circuit on the jitter are analyzed, and the explicit expression for the jitter based on circuit components is derived as well. The simulation and experiment results are proved to show that the jitter and phase noise characteristics can be improved by increasing Q(L) of the circuit.

Parallelism-based technique of time-interleaved analog-to-digital conversion (TIADC) has become an effective solution for the higher sampling rate acquisition system to acquire non-repetitive waveforms. With the increase of sampling frequency, the indeterminacy of combining sequence of sampled data among multiple components has become a highlighted barrier for the reset operation of high-speed acquisition systems, and this is especially obvious for the ultra-fast TIADC systems. In this paper, we clarify the root of the problem in multiple-component synchronization (MCS) caused by such reset operation. Also we propose a novel and reliable hardware solution to precisely condition each reset signal, including three key circuit design parameters, i.e., the best time interval, required edge uncertainty, and the minimum delay precision. Besides, the designing scheme and debugging procedures are presented in detail in a generalized platform of this system type. Finally, in order to demonstrate the feasibility, parametric materialization and testing verification are gradually accomplished in a 20 Giga Samples Per Second (GSPS) TIADC system composed of four 5 GSPS ADC components. The results show that the proposed method is feasible and effective for ensuring the combined determinacy of multiple groups of sampled data and solving the MCS problem. In comparison with other existing solutions, it adopts some simple logic components more easily and flexibly, and this is significant for the development of congeneric systems or instruments featuring the MCS.

In traditional digital storage oscilloscope (DSO), sampled data need to be processed after each acquisition. During data processing, the acquisition is stopped and oscilloscope is blind to the input signal. Thus, this duration is called dead time. With the rapid development of modern electronic systems, the effect of infrequent events becomes significant. To capture these occasional events in shorter time, dead time in traditional DSO that causes the loss of measured signal needs to be reduced or even eliminated. In this paper, a seamless acquisition oscilloscope without dead time is proposed. In this oscilloscope, three-dimensional waveform mapping (TWM) technique, which converts sampled data to displayed waveform, is proposed. With this technique, not only the process speed is improved, but also the probability information of waveform is displayed with different brightness. Thus, a three-dimensional waveform is shown to the user. To reduce processing time further, parallel TWM which processes several sampled points simultaneously, and dual-port random access memory based pipelining technique which can process one sampling point in one clock period are proposed. Furthermore, two DDR3 (Double-Data-Rate Three Synchronous Dynamic Random Access Memory) are used for storing sampled data alternately, thus the acquisition can continue during data processing. Therefore, the dead time of DSO is eliminated. In addition, a double-pulse test method is adopted to test the waveform capturing rate (WCR) of the oscilloscope and a combined pulse test method is employed to evaluate the oscilloscope's capture ability comprehensively. The experiment results show that the WCR of the designed oscilloscope is 6,250,000 wfms/s (waveforms per second), the highest value in all existing oscilloscopes. The testing results also prove that there is no dead time in our oscilloscope, thus realizing the seamless acquisition.