Search

Generally, injecting activated carbon in front of an air preheater is a common method for removing mercury in coal-fired power plants. However, high cost and low efficiency limit the practical application of this procedure. As one of the transition metal dihalides, molybdenum disulfide (MoS2) has attracted much attention. Herein, density functional theory calculation was applied to explore the mercury removal properties of MoS2 due to its good affinity for mercury. MoS2 was prepared using hydrothermal methods, while MoS2 doped with MnO2 (Mm adsorbent) was prepared using an ultrasonic mixing method. The prepared Mm adsorbent was characterized using X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy (TEM),and X-ray photoelectron spectroscopy. Rod-shaped MnO2 successfully appeared on the surface of flower-shaped MoS2. The adsorption of mercury (Hg0) on the MoS2/MnO2 (Mm) surface matched the Mars–van Krevelen reaction mechanism, indicating the consumption of lattice oxygen in the adsorbent. Additionally, the mercury removal efficiency of 3-Mm (MoS2 doped with 30 wt. % MnO2) adsorbent can still reach 90% under N2 + 200 ppm SO2. [ABSTRACT FROM AUTHOR]

Generally, injecting activated carbon in front of an air preheater is a common method for removing mercury in coal-fired power plants. However, high cost and low efficiency limit the practical application of this procedure. As one of the transition metal dihalides, molybdenum disulfide (MoS2) has attracted much attention. Herein, density functional theory calculation was applied to explore the mercury removal properties of MoS2 due to its good affinity for mercury. MoS2 was prepared using hydrothermal methods, while MoS2 doped with MnO2 (Mm adsorbent) was prepared using an ultrasonic mixing method. The prepared Mm adsorbent was characterized using X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy (TEM),and X-ray photoelectron spectroscopy. Rod-shaped MnO2 successfully appeared on the surface of flower-shaped MoS2. The adsorption of mercury (Hg0) on the MoS2/MnO2 (Mm) surface matched the Mars–van Krevelen reaction mechanism, indicating the consumption of lattice oxygen in the adsorbent. Additionally, the mercury removal efficiency of 3-Mm (MoS2 doped with 30 wt. % MnO2) adsorbent can still reach 90% under N2 + 200 ppm SO2. [ABSTRACT FROM AUTHOR]

The structure of a muzzle brake has a significant effect on the overall technical performance of an automatic weapon. This paper presents a multi-objective optimization of a muzzle brake that enhances the overall performance, that is, it increases the muzzle brake efficiency and simultaneously decreases the noise emanating from the rifle upon discharge. A standard impact-reaction muzzle brake was selected as the research object. The optimal values of four structural parameters were established through multi-objective optimization. The process consists of design of experiments, coupled computational fluid dynamics and computational acoustics calculations, an approximation model, and a multi-objective genetic algorithm. Based on the results, the correlation and sensitivity between the structural parameters and the objectives were investigated. Moreover, the reaction force and noise directivity of the optimized muzzle brake were compared with those of the original design. The results show that the disk angle of the side holes was the most sensitive design variable for both efficiency and noise. The optimized muzzle brake had a remarkable improvement in brake efficiency accompanied by only a small increase in the sound pressure level, so it showed better overall performance. The optimization method proposed in this paper is practical and effective for engineering design. [ABSTRACT FROM AUTHOR]

Atmospheric pressure cold plasmas are widely used in the biomedical field as evidenced by developments in recent years. In this study, a quartz tube-guided gas–liquid two-phase discharge has been configured with a hollow needle-water structure. The power source for the device was sinusoidal, and switching between a gas–liquid miscible discharge and a pure gaseous discharge was simple. It was discovered that the gas–liquid discharge was beneficial in terms of reactant species generation and reaction efficiency in terms of processing water. The types of particles, the physicochemical properties, and the concentrations of reactive oxygen and nitrogen species in the discharge were studied spectroscopically. The discharge was discovered to have high levels of H2O2 and NO2−, and the activated water was proven to be effective at sterilizing samples that were contaminated with micro-organisms. Key experimental parameters including the driving voltage and the air flow rate were optimized to achieve the best sterilization conditions. The membrane potential changes in the treated bacteria were also studied to explore the causes of bacterial inactivation. The results showed that the device exhibited a strong bactericidal effect for the gas–liquid mixed phase discharge operating at 17 kV for 5 min with a gas flow rate of 0.3 SLM. In addition, the present device offers enhanced sterilization efficiency relative to the efficiency of conventional plasma sterilization equipment and, therefore, has a wide range of applications. [ABSTRACT FROM AUTHOR]

Plasma-activated solution (PAS) has attracted wide attention in cancer treatment because it can treat deep tumors and offer storability. The changes in reactive species and physicochemical properties of PAS during storage can affect its anticancer effect. In this study, the plasma-activated medium (PAM) was prepared by treating RPMI 1640 medium with afterglow gas generated by a custom-built air surface dielectric barrier discharge device. PAM was stored at four common temperature conditions (25 °C, 4 °C, −20 °C, and −80 °C) for 1 day, 4 days, and 7 days, and then, the physicochemical properties, reactive oxygen and nitrogen species (RONS), and the anti-cancer effect on A549 cells under different storage conditions were compared. The results showed that PAM exhibited different anticancer effects at different storage temperatures over a 7 day storage period. The anticancer ability of PAM under 80 °C storage remained stable after 7 days of storage and decreased at all other temperatures. These results were also verified by apoptosis results, and the differences were mainly related to the concentration of H2O2 and NO2−, and oxido reduction potential. Our results provided a theoretical basis for the storage of PAM and its application in anticancer therapy. [ABSTRACT FROM AUTHOR]