Search

The research presents an overview of the possibilities of using boron-containing compounds as electrolytes for fuel cells. The main assumption here is to develop a molten carbonate fuel cell type power source, where the molten electrolyte is kept by a ceramic matrix between the electrodes. In the cases which are described in this study, attempts were made to develop electrolytes based on borates. Whereas the reported studies contain very little information on this subject, it was possible to identify several promising compounds and to extrapolate their performance to higher temperatures. Reported data on the temperature at eutectic points suggest that the operating range of such electrolytes is at a level like the molten carbonate fuel cell. The study presents a proposal for a mathematical model of a new type of fuel cell based on molten borates. The mathematical model is based on the reduced order model, supplemented with the influence of the ceramic matrix on the resulting ionic conductivity of the electrolyte layer. The model was used to determine potential performances for a few selected borates and a sensitivity analysis of selected geometric parameters was performed for the best of them. The results obtained were compared against the standard molten carbonate fuel cell. • Conductivities of various boron compounds have been investigated and compared. • Application of boron-containing compounds in fuel cells electrolyte has been analyzed. • A model of molten borate fuel cell has been developed. • Borates occurring to have higher potential than carbonates what might result in higher efficiency. [ABSTRACT FROM AUTHOR]

This paper presents the results of research into improving the ionic conductivity of Molten Carbonate Fuel Cell by modifying the matrix material. So far, we have succeeded in using materials such as YSZ and SDC, but we are now trying to use powders based on Ba Na and TiO 2. These materials are characterized by their oxygen ion conductivity at elevated temperatures. A matrix of these materials was produced and used to build MCFCs. Based on the experiments carried out and the mathematical model of the fuel cell, the contribution of the oxygen ion conductivity to the total ionic conductivity was determined. • Research on oxygen ion conduction materials was performed. • BNT material has best oxygen ion conductivity parameters and was chosen for experiments. • New matrix made of BNT was manufactured. • Composite Li/K and BNT membrane was investigated under EIS and in fuel cell. • Model including ionic conductivity and tortuosity is presented and validated. [ABSTRACT FROM AUTHOR]