Search

The long-term aging of bitumens and its effect on low-temperature performance is a detrimental phenomenon. In order to investigate the effects of the aging phenomenon on the low-temperature performance of bitumens, it is very important to accurately simulate the behavior of bitumens in repeated aging cycles and to investigate related viscoelastic, chemical, and microstructural changes. In this research, three types of bitumen with penetration grades of 40/50 , 60/70 , and 85/100 were subjected to one to three cycles of pressure aging vessel (PAV) aging. Comprehensive data on the bitumen's behavior were obtained by conducting bending beam rheometer, Fourier transform infrared spectroscopy, and atomic force microscopy tests. Using the results of the conducted tests, an attempt was made to find precise relationships between different indicators of bitumen aging in terms of chemistry and viscoelasticity. The results revealed a linear correlation between the aging index and the ΔTc and dissipated energy ratio (DER) values, as well as the aging index and the vertical shift factor of the stiffness-time curve. The fitting coefficients of these linear relationships were R2=0.8 and above, indicating a strong linear relationship between these parameters. Furthermore, the viscoelastic indices DER and the derivation of creep compliance (J′) exhibited a fairly good linear relationship. [ABSTRACT FROM AUTHOR]

• Performing temperature sweep test to generate master curves for viscoelastic properties of bitumen. • Optimizing the number of frequencies and temperatures to develop master curves of asphalt mortar and mixture. • Reducing the time and cost of dynamic modulus test without missing the accuracy of master curves. This study aimed to assess the feasibility of substituting temperature sweep tests for frequency sweep tests and explore the potential of utilizing fewer temperatures and frequencies in dynamic modulus tests to formulate viscoelastic properties master curves. The results indicated that master curves derived from temperature sweep tests mirrored the trends and values obtained from frequency sweep tests, presenting a viable alternative for constructing viscoelastic properties master curves of bitumen. Furthermore, models fitted to dynamic modulus test results at three temperatures and three frequencies exhibited comparable primary parameters, values, and trends to those derived from the complete dataset. The model fitted on reduced data demonstrated robust performance with correlation and R-squared values exceeding 0.95. Considering a marginal increase of about 5% in Residual Standard Error (RSE) values when using the reduced dataset, generating master curves with fewer test results underscored the feasibility and reliability of the original master curves. [ABSTRACT FROM AUTHOR]