Search

AbstractIn order to reach the fire protection standard for new energy vehicle battery packs, the incorporation of SiO2 aerogel particles as a functional filler in the nitrogen and phosphorus fire-retardant system is necessary due to the inadequate mechanical properties. The effects of SiO2 aerogel on the properties of the coatings for the electric car battery pack were investigated by fire protection test, thermogravimetric analysis, limited oxygen index, UL-94 vertical test, combustion test, mechanical properties test, and weathering resistance test. The backside temperature fireproof coatings containing 1.5% SiO2 aerogel was effectively reduced to 250.2 ± 0.1 °C and the residual weight of the coating reached 32.61 ± 0.01%. The composition and structure of the carbon layer were analyzed further. Especially, the weight loss percentage of the fireproof coating is only 5.87 ± 0.02% in the water resistance test. However, excessive SiO2 aerogel decreased the performances of fireproof coatings. [ABSTRACT FROM AUTHOR]

Electric vehicles are the future of mobility. Electric vehicles have batteries to store energy and the most common type of batteries used in electric vehicle's battery packs are lithium-ion cells. These cells have very high energy density and dissipate heat during charging and discharging cycles. There is a need to have an efficient cooling system to dissipate this heat. Bigger-size batteries in four-wheelers use liquid cooling to ensure faster charging and longer battery life. Surface cooling and tab cooling are two popular types of liquid cooling systems for battery packs. Surface cooling is a preferred type of cooling system as it is less complex and cheaper, but it creates a temperature gradient inside the cell which is detrimental to cell life. This work proposes tab cooling as a solution to improve the life cycle of lithium-ion cells. Two sets of the battery pack, one with tab cooling and the other without a cooling system were tested under different conditions for multiple fast charging and discharging cycles until their initial capacity was reduced by 30%. The results show that with tab cooling the battery performed better and battery degradation was reduced. [ABSTRACT FROM AUTHOR]

Interest towards electric vehicle adoption is on the rise due to the lower running and maintenance cost it offers, along with zero tailpipe emissions. Range anxiety is one of the only concern that affects the adoption of electric vehicles. The state of charge of the traction battery pack has to be accurately determined and provided to the user to avoid range anxiety. Minute battery parameters has to be considered to improve the accuracy of the state of charge determination. In order to overcome the problem of range anxiety, an innovative strategy that takes into account how vibrations affect the performance of EV batteries is developed in this research. By doing this, the state of charge estimation precision is improved and thereby raises the driver's faith in electric vehicles. The impacts and vibrations felt on the traction battery pack during driving would lead to heat generation. The heat generated is found to be highest when the vibrations resonate at the natural frequencies of the traction battery pack. The natural frequency of the battery pack is considered when the battery is kept in the battery chamber of the two-wheeler electric vehicle. The vibrations at natural frequency produces heat which is accounted for when the state of charge is determined. To obtain accurate state of charge estimation, a Kalman filter-based approach is used. The Kalman filter-based estimation uses the conventional methods which are the open circuit voltage method and the Coulomb counting method to improve the estimation process along with the consideration of the heat component due to vibrations and impact. The vibration analysis is performed using MATLAB, while the state of charge determination is implemented in hardware and the Kalman estimation done using Python. The system is modelled on an electric two-wheeler platform and the testing is done to compare the state of charge accuracy of the open circuit voltage method, the Coulomb counting method and the Kalman filter-based estimation approach. The inclusion of the vibrational heat analysis for State of Charge estimation in the hardware testing of the electric two-wheeler provides an accurate state of charge value. [ABSTRACT FROM AUTHOR]

Lithium‐ion cell chemistries are favored in the automotive sector, as they enable electric vehicles (EVs) to compete with traditional gasoline‐powered vehicles in terms of performance, range, and cost. The life and performance of these packs depend upon the Battery management system which monitors and controls the pack. The modeling, simulation, and analysis of a lithium‐ion battery pack that closely resembles an actual automobile battery are the focus of this paper. Real cells that are commercially available and specifically developed for automotive applications are modeled in the simulation environment. The cell characterization and formation of pack topology with heat exchange are addressed. A commercial electric car's power train model and EV dynamics are used in the simulation environment to test the modeled battery pack over various drive cycles. The performance analysis is upscaled by considering different aspects like resistive forces while driving, ambient temperature, initial conditions while the vehicle starts, etc. The battery manufacturer can verify the battery's performance under different load conditions, with a high degree of similarity to real‐world scenarios. The simulations are conducted on MATLAB/Simulink 2021b software. [ABSTRACT FROM AUTHOR]

Safety risk assessment is essential for evaluating the health status and averting sudden battery failures in electric vehicles. This study introduces a novel safety risk assessment approach for battery systems, addressing both cell and pack levels with three key indexes. The core of the assessment lies in representing the relative deviation of cell voltages through scatter diagrams across various stages of service life. Specifically, the study quantifies voltage deviations and deviation angles within different state of charge intervals to gauge safety risks at the cell level. Leveraging clustering algorithms aids in identifying outlier values. Furthermore, the dispersion of scatter points is utilized to assess safety risks at the pack level. Validation of this proposed model is conducted through cycling tests on battery modules with a deformed cell, demonstrating its efficacy in capturing inconsistent features of mechanical deformation abuse across the three indexes, thereby triggering alarms during operation. Moreover, the method is applied to assess the safety risks of five hazardous and accident-prone vehicles, enabling comprehensive evaluation of potential faulty cells and safety risks at the pack level. This proposed approach offers a fresh perspective on the comprehensive safety risk assessment of battery systems. [ABSTRACT FROM AUTHOR]

The safety of battery system is compromised by the abusive operation and aging, potentially resulting in the abnormal voltage levels. Rapid detection and accurate diagnosis of voltage fault are crucial for ensuring the safety of battery packs. A battery voltage fault diagnosis method is proposed by using the mutual information in this work, which can identify faulty cells timely. Specifically, the voltage of battery pack in an electric vehicle is collected, and the mutual information of voltages between each paired-cells is calculated. The presence of faulty cells disturbs the original distribution of mutual information. Therefore, the Ryan Joiner (RJ) test is used to judge whether the normal distribution of calculated mutual information or not. The interquartile test is used to detect the outliers. The faulty cell is diagnosed by matching the cell corresponding to the outliers. The defaults resulting from an internal short circuit and mechanical vibration are analyzed and diagnosed. The method can avoid misdiagnosis caused by the mutual influence between different faults. Furthermore, the fault diagnosis capability of presented method is discussed under various states of aged cells. The experimental results verify the effectiveness, robustness, model-free, and easiest-to-implement of the presented method. • A battery voltage fault diagnosis method using the mutual information. • Ryan Joiner test is used for the normality test. • The interquartile test is used for outlier detection. • The proposed scheme is verified under several faults. • The method exhibits robustness under different aging states. [ABSTRACT FROM AUTHOR]

The electric vehicles are not completely emission-free. The vehicles consume power and the power generation processes involve carbon emissions, resulting in indirect vehicle usage carbon emissions. A use-phase carbon emissions assessment can help electric vehicle designers and manufacturers analyze the onboard carbon footprint and mitigate vehicle-related carbon emissions through energy consumption optimization. In this article, we focus on the use-phase carbon footprint based on the energy losses in electric vehicle battery packs. A battery pack energy loss model is established to examine the carbon footprint of four main subsystems of the battery pack, including the energy storage system, thermal management system, and battery junction box. We use the proposed method to evaluate the battery pack use-phase carbon emissions in four different cities from four main continents. The results show that the highest emissions appear in Tokyo (436.2 kgCO 2) due to the relatively high greenhouse gas factor on the grid, the London has the lowest 207.5 kgCO 2 emissions due to the massive adoption of sustainable energy during power generation. With a similar high greenhouse gas factor, but Sydney shows lower emissions (347.5 kgCO 2) compared to Tokyo, which illustrates the closer the annual average temperature to the battery suitable operation range, the lower energy loss happens inside the battery pack due to the low thermal management load and resistance energy loss in the cells. This electric vehicle has the highest energy loss rate (20.8%) in New York, 343.6 kgCO 2 emissions, and the highest thermal management system energy losses show the high seasonal temperature difference causing the high thermal management load to maintain the battery temperature. The proposed method can be used for different battery pack configurations and vehicle uses, providing researchers with a robust and versatile use-phase carbon emissions assessment strategy. • A battery pack use-phase carbon footprint assessment strategy is proposed. • The carbon emissions for four battery pack subsystems are calculated. • Temperature has the greatest impact on the battery pack carbon emissions. [ABSTRACT FROM AUTHOR]

• The heat generation model for cylindrical Li-ion battery was built. • A liquid immersion cooling battery pack containing 60 batteries were established. • At 2C discharge rate, 0.5 L/min flow rate was recommended. • The battery pack can address localized high-rate discharge events (4.5C or 6.5C). • Liquid immersion cooling BTMSs have great heat dissipation performance. With the increasingly severe challenges of the thermal management of battery packs for electric vehicles, the liquid immersion cooling technology has gradually attracted more attention due to its superior characteristics such as high heat dissipation efficiency, well temperature uniformity and low risk of thermal runaway. To investigate the heat transfer characteristics of the liquid immersion cooling BTMSs, the 3D model of the 60-cell immersion cooling battery pack was established, and a well-established heat generation model that leveraged parameters derived from theoretical analysis and experiments was incorporated into the 3D simulation to analyze the thermal characteristics of battery pack. The simulation results showed that under the discharging rate of 2C, even with the lowest coolant flow rate in this work (0.2 L/min), no localized abnormal overheating within the battery pack was observed, and the highest temperature was 34.22 °C. The temperature uniformity within the battery pack improved with the increase of the coolant flow rate. It was recommended to maintain a flow rate above 0.5 L/min to ensure a temperature difference below 5 °C. The experimental apparatus of the immersion cooling battery pack was also developed to explore the heat dissipation and temperature uniformity at 2C discharge rate. The simulation results were in well agreement with the experimental results, with the deviation less than 0.43 °C when the flow rate exceeded 0.6 L/min. The effect of the localized high-rate discharge events (4.5C and 6.5C) at different battery pack locations on temperature distribution and uniformity was further discussed based on the verified 3D model. The results suggested that liquid immersion cooling systems offered promising potential for achieving both efficient heat dissipation and preventing thermal runaway in battery packs. [ABSTRACT FROM AUTHOR]

This comprehensive study delves deeply into the realm of electric vehicle (EV) battery temperature management, with a central focus on optimizing cooling systems using ethylene glycol solutions. The research rigorously examines the interplay between ethylene glycol concentrations and cooling methods on EV battery performance. ANSYS and MATLAB along with analytical methods were used for this project. Key findings reveal a consistent inverse relationship between ethylene glycol concentration and cooling efficiency, favoring lower concentrations. Indirect cooling, achieved with a 30% ethylene glycol solution, emerges as the most effective method, while direct cooling proves less efficient. Notably, mineral oil cooling at 0.04 m/s outperforms air cooling, albeit with higher energy consumption. Consequently, air cooling is recommended for smaller battery packs due to its lower power demand. The study also underscores the importance of selecting ethylene glycol concentrations based on environmental conditions, advocating lower concentrations for warmer climates and higher concentrations for colder regions. In summary, this research significantly advances EV technology by advocating for customized cooling system designs that consider environmental factors, battery specifications, and practical implementation. It provides a critical roadmap for enhancing EV thermal management systems' efficiency and sustainability. Further research is needed to explore the long-term effects of diverse cooling methodologies on battery longevity and performance within the practical constraints of EV integration. • Cooling effectiveness increases with lower concentration. • Indirect cooling outperforms direct methods. • Higher coolant flowrate enhances heat extraction but requires more energy. • A 50% ethylene glycol solution is suitable for most weather conditions. [ABSTRACT FROM AUTHOR]

With the increasing scale of battery systems, the impact of battery inconsistency due to aging on battery pack performance becomes increasingly significant. To achieve high-precision battery pack modeling, we propose an in-situ estimation method for battery inconsistency parameters. The proposed method utilizes current and voltage data recorded by the battery management system (BMS). The respective terminal voltage errors are used as the loss function, and the equivalent circuit model and the fully connected neural network are combined to realize the estimation of inconsistency parameters. Through optimization algorithm, the inconsistency parameters of all cells in the battery pack are simultaneously estimated. The estimation results of full capacity, high-end capacity, and internal resistance exhibit high accuracy with root-mean-square error (RMSE) values of 0.82% (0.393 Ah), 0.70% (0.336 Ah), and 3.34% (0.097 m Ω), respectively. The battery pack model constructed using the estimation results maintains high accuracy across various operating conditions, demonstrating the effectiveness of the proposed method for inconsistency estimation and battery pack modeling. • Estimate the battery inconsistency parameters based on the similarity of the battery SOC-OCV curves with the BMS data. • Combine the neural network and equivalent circuit model to simultaneously estimate the capacity, internal resistance and SOC parameters of each cell in the battery pack. • The accuracy of the proposed method was demonstrated by comparing measured parameters with estimated parameters, and the effectiveness was further demonstrated by battery pack model simulation results. [ABSTRACT FROM AUTHOR]