Search

• Mechanical response characteristics of beam-column substructures exposed to fire are analyzed. • Explicit calculation formulas for determining the collapse resistance are derived in detail. • Proposed theoretical calculated formulas agree well with these from numerical simulations. • Error analysis is conducted to reveal deviation reasons between theoretical model and numerical simulations. This paper provides a simplified analytical model for the restrained steel beam-column substructure under a fire-induced progressive collapse scenario, which is applied to predict the collapse resistance of substructures under fire. The simplified model is formulated for axially and rotationally restrained two-span steel beam-column substructures under column-loss scenarios and involves rigid and semi-rigid connections. The response characteristics of restrained substructures exposed to fire under column-loss scenarios in each response stage are elaborately analyzed. A "negative" catenary stage, in consideration of the unique negative axial force effects induced by the temperature thermal expansion, was first introduced in the five-stage simplified model for restrained substructures exposed to fire against progressive collapse. Subsequently, the explicit calculation formulas for determining the vertical loads and deflection of both rigid and semi-rigid joint substructures exposed to fire were derived in a quantified way, based on rigid-plastic mechanisms and restraint coefficient methods. In addition, the corresponding numerical simulation analysis on a restrained two-span steel beam-column substructure with different end constraints and fire conditions was carried out to verify the applicability and reliability of established theoretical formulas. Comparisons of vertical load-deflection relationships between the calculation formulas and corresponding numerical simulation shows good accuracy. For more accurate prediction results, the error analysis was further conducted, and several theoretical formulas were modified, which were verified to be accurate and reliable after correction. With derived resistance functions, the resistance of steel beam-column substructures in fire-induced progressive collapse scenarios can be predicted. [ABSTRACT FROM AUTHOR]

• Proper quantification of joint rotational stiffness (JRS) of a flight intersection joint (FIJ) influences the dynamic characteristics of a flight vehicle. • JRS of an FIJ is often determined experimentally due to the lack of a right predictive model. • An analytical model is proposed to evaluate the JRS of a radial-type FIJ when subjected to an external bending moment. • Numerical analyses and experiments are performed on six different FIJ configurations. • JRS and moment-rotation behavior predicted by the proposed model are correlated with both experimental and numerical analyses. • Further, the effect of joint clearances on the behavior of FIJ is investigated through the present model. Joint rotational stiffness (JRS) of a flight intersection joint (FIJ) and its accurate quantification play an essential role in studying the dynamic modal characteristics of a flight vehicle. This JRS of a FIJ is mostly determined through elaborate experiments due to the non-availability of a reliable predictive model. Therefore, in this paper, an analytical model is proposed to evaluate JRS of a radial type FIJ when subjected to external bending moment. In this model, at first, the tensile and compressive part of the FIJ section is identified by determining the neutral axis position. The respective part's contributing stiffness is then estimated by employing a spring-mass model. Later, the JRS expression is derived from the moment equilibrium condition and expressed as a function of the stiffness of the tensile and compressive part and neutral axis position. Subsequently, finite element analysis (FEA) is conducted with different numbers of screws, followed by detailed experimental investigations. The proposed analytical model is validated with the results from FEA and experiments for different screw configurations of FIJ. Further, the proposed model is extended to account for the effect of joint clearances on the JRS and the corresponding moment-rotation characteristics of the FIJ. [Display omitted] [ABSTRACT FROM AUTHOR]