Search

Objectives: Endoscopic ultrasound‐guided tissue acquisition (EUS‐TA) is used for pathological diagnosis and obtaining samples for molecular testing, facilitating the initiation of targeted therapies in patients with pancreatic cancer. However, samples obtained via EUS‐TA are often insufficient, requiring more efforts to improve sampling adequacy for molecular testing. Therefore, this study investigated the use of oil blotting paper for formalin fixation of samples obtained via EUS‐TA. Methods: This prospective study enrolled 42 patients who underwent EUS‐TA for pancreatic cancer between September 2020 and February 2022 at the Osaka International Cancer Institute. After a portion of each sample obtained via EUS‐TA was separated for routine histological evaluation, the residual samples were divided into filter paper and oil blotting paper groups for analysis. Accordingly, filter paper and oil blotting paper were used for the formalin fixation process. The total tissue, nuclear, and cytoplasm areas of each sample were quantitatively evaluated using virtual slides, and the specimen volume and histological diagnosis of each sample were evaluated by an expert pathologist. Results: All cases were cytologically diagnosed as adenocarcinoma. The area ratios of the total tissue, nuclear, and cytoplasmic portions were significantly larger in the oil blotting paper group than in the filter paper group. The frequency of cases with large amount of tumor cells was significantly higher in the oil blotting paper group (33.3%) than in the filter paper group (11.9%) (p = 0.035). Conclusions: Oil blotting paper can increase the sample volume obtained via EUS‐TA on glass slides and improve sampling adequacy for molecular testing. [ABSTRACT FROM AUTHOR]

Aims: Information on breastfeeding and safety of biologics in infants is lacking due to difficulties in case collection. We evaluated methods for determining the concentration of biologics in breast milk using a dry filter method that can simplify the collection, storage and transport of breast milk. Methods: To generate dried filter paper (DFP) samples, approximately 30 μL of breast milk was placed onto a Whatman 903 card and punched out. After extraction, the supernatant was measured using an enzyme‐linked immunosorbent assay. Three concentrations of each drug were prepared in liquid breast milk (LBM) and DFP samples to determine their stability up to 28 days after storage at 2–8°C or −20°C for LBM and 25 ± 5°C for DFP. LBM and DFP samples were also provided by nursing mothers using biologics during lactation, and drug concentrations in both samples were compared. The agreement between the two measurement methods was confirmed by Bland–Altman analysis. Results: Breast milk was provided by 12 mothers who used biologics (tocilizumab, abatacept, etanercept, golimumab, sarilumab and belimumab). The coefficients of variation for within‐run and between‐run precision for the six drugs were within 15% for both LBM and DFP, and accuracy was within 90%–110% of the quality controls. After 28 days, concentrations remained at more than 90%. The difference between the values obtained by each method was within the acceptable range of error (−12.1 to +16.6 ng/mL). Conclusions: A method for determining the concentration of biologics using DFP is expected to help improve pharmacotherapy for lactating women. [ABSTRACT FROM AUTHOR]

In recent years, paper‐based functional materials have received extensive attention in the field of energy storage due to their advantages of rich and adjustable porous network structure and good flexibility. As an important energy storage device, paper‐based supercapacitors have important application prospects in many fields and have also received extensive attention from researchers in recent years. At present, researchers have modified and regulated paper‐based materials by different means such as structural design and material composition to enhance their electrochemical storage capacity. The development of paper‐based supercapacitors provides an important direction for the development of green and sustainable energy. Therefore, it is of great significance to summarize the relevant work of paper‐based supercapacitors for their rapid development and application. In this review, the recent research progress of paper‐based supercapacitors based on cellulose was summarized in terms of various cellulose‐based composites, preparation skills, and electrochemical performance. Finally, some opinions on the problems in the development of this field and the future development trend were proposed. It is hoped that this review can provide valuable references and ideas for the rapid development of paper‐based energy storage devices. [ABSTRACT FROM AUTHOR]

Adopting a scoping review method, we examined peer‐reviewed academic papers published about human–lion conflict (HLC) (including coexistence) and identified knowledge gaps. We searched papers published between January 1981 and December 2023 using academic databases, with the key terms African lion, human–lion conflict, human–lion coexistence, and human–lion interaction. This produced 485 records, reduced to 137 after using additional criteria. Ninety‐eight papers were focused on lions in Kenya, Tanzania, Zimbabwe, and Botswana. Ten pan‐African studies were identified in our review. Our inductive analysis identified four themes related to HLC: attitudes and perceptions toward lions, causes of HLC, consequences of HLC, and mitigating HLC. Some limitations identified in systematic reviews of human–wildlife conflict have been addressed in recent years, such as broadening the geographical scale of research. However, some knowledge gaps remain, including a lack of assessment of mitigation strategies and studies on climate changes impact on human–lion conflict. Addressing the knowledge gaps highlighted in this review will require diversifying the disciplinary composition of the research teams and increasing researcher reflexivity. [ABSTRACT FROM AUTHOR]

This article explores the conception and execution of paper currency schemes in Tokugawa Japan (1603–1868). Paper currency was widely used as a form of local money in early modern Japan, but has received close to no attention in Anglophone scholarship even amid a recent upsurge in interest in the global history of money. From the perspective of monetary history, Tokugawa paper currency presents an intriguing puzzle. Even as paper currencies repeatedly collapsed in value, they remained in common use as an essential component of the early modern monetary system. Using the case of Sendai domain, a large fiefdom in northeastern Japan, the article argues that the monetary practices and expectations of ordinary subjects transformed paper money, created through partnerships between the samurai ruling class and powerful merchant financiers, from a tool meant to serve the interests of state finances into a low‐denomination currency convenient for everyday transactions, resulting in the bills' surprising longevity as a form of small change. Drawing on approaches that centre the role of non‐state and marginal actors in the making of money, it sheds new light on the political economy of late Tokugawa Japan and offers new insights into the global history of money. [ABSTRACT FROM AUTHOR]

In this work, stacked SiC fibers paper‐reinforced SiC ceramic matrix composites (SiCnf/SiC CMCs) were prepared by nanoimpregnation and transient eutectic (NITE) process using ultra‐long single‐crystal SiC nanofibers. The effect of the SiCnf surface modification via boron nitride (BN) interphase deposition as well as the sintering additive (Al2O3–Y2O3) content on the density, microstructure, and mechanical properties of SiCnf/SiC CMCs has been investigated systematically. The results revealed that the laminated SiCnf/SiC CMCs feature a significant saw‐tooth‐like curve on the load–displacement test, which indicates that the obtained laminated structure with the weak interlayer binding owning to the BN coating treatment possesses significant toughening to the SiC ceramics. Specifically, the SiCnf/SiC CMCs with the sintering additive content of 12 wt% revealed a fracture toughness of over 10 MPa m1/2 after 60 min of BN interface deposition, which is 104.31% higher than that of the composites prepared without BN coating. [ABSTRACT FROM AUTHOR]

To compare the urine Congo‐red dot paper test (CRD) with dipstick urinalysis to screen preeclampsia (PE). A total of 409 paired spot urine samples were obtained prospectively from women with suspected pre‐eclampsia attending for routine hospital visits. Congo‐red dot paper test and dipstick urinalysis were examined and compared to screen pre‐eclampsia. The agreement between the two urinary test is modest (kappa coefficient = 0.28, 95% CI 0.14–0.42). The specificity of CRD was higher than urinalysis (97.4% vs. 90.4%, p <.001). Urinalysis performed better in sensitivity (77.3% vs. 40.9%, p =.04) and the area under the receiver operating characteristic curves (AUC) (0.84 [95% CI 0.74–0.94] vs. 0.69 [95% CI 0.55–0.83], p =.04) than CRD, respectively. The sensitivity, specificity, AUC of the parallel test of them is 86.4% (64.0%–96.4%), 89.1% (85.5%–92.0%), and 0.88 (95% CI 0.79–0.96). And the serial test is 31.8% (14.7%–54.9%), 98.7% (96.8%–99.5%), 0.65 (95% CI 0.51–0.79), accordingly. The urinalysis is a better diagnosing test for preeclampsia. CRD could aid in the diagnosis of patients with preeclampsia. Combined the two tests in suspected patients may further improve the performance in the diagnosis of preeclampsia. Further study need to be made for its potential clinical practice. [ABSTRACT FROM AUTHOR]

Laser‐induced graphene (LIG) technology has provided a new manufacturing strategy for the rapid and scalable assembling of triboelectric nanogenerators (TENG). However, current LIG‐based TENG commonly rely on polymer films, e.g., polyimide (PI) as both friction material and carbon precursor of electrodes, which limit the structural diversity and performance escalation due to its incapability of folding and creasing. Using specialized PI paper composed of randomly distributed PI fibers to substantially enhance its foldability, this work creates a new type of TENG, which are structurally foldable and stackable, and performance tailorable. First, by systematically investigating the laser power‐regulated performance of single‐unit TENG, the open‐circuit voltage can be effectively improved. By further exploiting the folding process, multiple TENG units can be assembled together to form multi‐layered structures to continuously expand the open‐circuit voltage from 5.3 to 34.4 V cm−2, as the increase of friction units from 1 to 16. Last, by fully utilizing the unique structure and performance, representative energy‐harvesting and smart‐sensing applications are demonstrated, including a smart shoe to recognize running motions and power LEDs, a smart leaf to power a thermometer by wind, a matrix sensor to recognize writing trajectories, as well as a smart glove to recognize different objects. [ABSTRACT FROM AUTHOR]

Key points: Academia is already witnessing the abuse of authorship in papers with text generated by large language models (LLMs) such as ChatGPT.LLM‐generated text is testing the limits of publishing ethics as we traditionally know it.We alert the community to imminent risks of LLM technologies, like ChatGPT, for amplifying the predatory publishing 'industry'.The abuse of ChatGPT for the paper mill industry cannot be over‐emphasized.Detection of LLM‐generated text is the responsibility of editors and journals/publishers. [ABSTRACT FROM AUTHOR]

The erratic, intermittent, and unpredictable nature of sweat production, resulting from physiological or psychological fluctuations, poses intricacies to consistently and accurately sample and evaluate sweat biomarkers. Skin‐interfaced microfluidic devices that rely on colorimetric mechanisms for semi‐quantitative detection are particularly susceptible to these inaccuracies due to variations in sweat secretion rate or instantaneous volume. This work introduces a skin‐interfaced colorimetric bifluidic sweat device with two synchronous channels to quantify sweat rate and biomarkers in real‐time, even during uncertain sweat activities. In the proposed bifluidic‐distance metric approach, with one channel to measure sweat rate and quantify collected sweat volume, the other channel can provide an accurate analysis of the biomarkers based on the collected sweat volume. The closed channel design also reduces evaporation and resists contamination from the external environment. The feasibility of the device is highlighted in a proof‐of‐the‐concept demonstration to analyze sweat chloride for evaluating hydration status and sweat glucose for assessing glucose levels. The low‐cost yet highly accurate device provides opportunities for clinical sweat analysis and disease screening in remote and low‐resource settings. The developed device platform can be facilely adapted for the other biomarkers when corresponding colorimetric reagents are exploited. [ABSTRACT FROM AUTHOR]

Power outages can cause harm to both society and individual health. Among the crucial elements of power systems, power transformers play a vital role, and their failures can lead to incidents and disruptions. According to statistics, almost 50% of the explosions and fires in the power transformer are caused by oil‐impregnated paper (OIP) bushing failures. Moreover, moisture is a crucial factor that affects the health of OIP bushings, and assessing the moisture level in OIP bushings is vital to guarantee the safety of power systems. While the frequency‐domain dielectric spectroscopy (FDS) method has been widely used to assess the moisture content of OIP bushings on‐site, it has the disadvantage of requiring a long measurement time. Therefore, a novel technique was proposed in this study that involves measuring the OIP bushing dissipation factor (tanδ) at 1 Hz to estimate the moisture content in a significantly shorter time. Five samples of OIP with various moisture levels have been selected, and an equation based on the OIPs' value of tanδ at 1 Hz was proposed to assess the moisture level of OIP bushings. Furthermore, the validity of the proposed method was successfully verified, proving its precision and time efficiency. [ABSTRACT FROM AUTHOR]

Paper, an inexpensive material with natural biocompatibility, non‐toxicity, and biodegradability, allows for affordable and cost‐effective substrates for unconventional advanced electronics, often called papertronics. On the other hand, polymeric elastomers have shown to be an excellent success for substrates of soft bioelectronics, providing stretchability in skin wearable technology for continuous sensing applications. Although both materials hold their unique advantageous characteristics, merging both material properties into a single electronic substrate reimagines paper‐based bioelectronics for wearable and patchable applications in biosensing, energy generation and storage, soft actuators, and more. Here, a breathable, light‐weighted, biocompatible engineered stretchable paper is reported via coaxial nonwoven microfibers for unconventional bioelectronic substrates. The stretchable papers allow intimate bioconformability without adhesive through coaxial electrospinning of a cellulose acetate polymer (sheath) and a silicone elastomer (core). The fabricated cellulose‐silicone fibers exhibit a greater percent strain than commercially available paper while retaining hydrophilicity, biocompatibility, combustibility, disposable, and other natural characteristics of paper. Moreover, the nonwoven stretchable cellulose‐silicone fibrous mat can adapt conventional printing and fabrication process for paper‐based electronics, an essential aspect of advanced bioelectronic manufacturing. [ABSTRACT FROM AUTHOR]

Personalized healthcare management is an emerging field that requires the development of environment‐friendly, integrated, and electrochemical multimodal devices. In this study, the concept of integrated paper‐based biosensors (IFP−Multi) for personalized healthcare management is introduced. By leveraging ink printing technology and a ChatGPT–bioelectronic interface, these biosensors offer ultrahigh areal‐specific capacitance (74633 mF cm−2), excellent mechanical properties, and multifunctional sensing and humidity power generation capabilities. More importantly, the IFP−Multi devices have the potential to simulate deaf‐mute vocalization and can be integrated into wearable sensors to detect muscle contractions and bending motions. Moreover, they also enable monitoring of physiological signals from various body parts, such as the throat, nape, elbow, wrist, and knee, and successfully record sharp and repeatable signals generated by muscle contractions. In addition, the IFP−Multi devices demonstrate self‐powered handwriting sensing and moisture power generation for sweat‐sensing applications. As a proof‐of‐concept, a GPT 3.5 model‐based fine‐tuning and prediction pipeline that utilizes recorded physiological signals through IFP−Multi is showcased, enabling artificial intelligence with multimodal sensing capabilities for personalized healthcare management. This work presents a promising and ecofriendly approach to developing paper‐based electrochemical multimodal devices, paving the way for a new era of healthcare advancements. [ABSTRACT FROM AUTHOR]

Avoiding financial losses requires preventing catastrophic oil‐filled power transformer breakdowns. Continuous online transformer monitoring is needed. The authors use paper insulation to evaluate transformer health for continuous online transformer monitoring. The study suggests a new artificial intelligence method for estimating paper insulation residual life in oil‐immersed power transformers. The four artificial intelligence models use backpropagation‐based neural networks to predict paper insulation lifespan. Four primary transformer insulating paper failure indices—degree of polymerisation, 2‐furfuraldehyde, carbon monoxide, and carbon dioxide—form the basis of these models. Each model, including the backpropagation‐based neural networks, estimates paper insulation life using one failure index, along with moisture and temperature data. Optimisation techniques enhance hidden layer neurons and epoch count for improved performance. Results are validated against literature‐based life models, establishing a precise input–output correlation. This method accurately predicts the remaining useable life of power transformer paper insulation, enabling utilities to take proactive measures for safe and efficient transformer operation. [ABSTRACT FROM AUTHOR]

Introduction: Poor communication is a leading root cause of preventable maternal mortality in the United States. Communication challenges are compounded with the presence of biases, including racism. Hospital administrators and clinicians are often aware that communication is a problem, but understanding where to intervene can be difficult to determine. While clinical leadership routinely reviews incident reports and acts on them to improve care, we hypothesized that reviewing incident reports in a systematic way might reveal thematic patterns, providing targeted opportunities to improve communication in direct interaction with patients and within the healthcare team itself. Methods: We abstracted incident reports from the Women's Health service and linked them with patient charts to join patient's race/ethnicity, birth outcome, and presence of maternal morbidity and mortality to the incident report. We conducted a qualitative content analysis of incident reports using an inductive and deductive approach to categorizing communication challenges. We then described the intersection of different types of communication challenges with patient race/ethnicity and morbidity outcomes. Results: The use of incident reports to conduct research on communication was new for the health system. Conversations with health system‐level stakeholders were important to determine the best way to manage data. We developed a thematic codebook based on prior research in healthcare communication. We found that we needed to add codes that were equity focused, as this was missing from the existing codebook. We also found that clinical and contextual expertise was necessary for conducting the analysis—requiring more resources to conduct coding than initially estimated. We shared our findings back with leadership iteratively during the work. Conclusions: Incident reports represent a promising source of health system data for rapid improvement to transform organizational practice around communication. There are barriers to conducting this work in a rapid manner, however, that require further iteration and innovation. [ABSTRACT FROM AUTHOR]

Complex polymers represent a challenge for remediating environmental pollution and an opportunity for microbial-catalysed conversion to generate valorized chemicals. Members of the genus Streptomyces are of interest because of their potential use in biotechnological applications. Their versatility makes them excellent sources of biocatalysts for environmentally responsible bioconversion, as they have a broad substrate range and are active over a wide range of pH and temperature. Most Streptomyces studies have focused on the isolation of strains, recombinant work and enzyme characterization for evaluating their potential for biotechnological application. This review discusses reports of Streptomyces-based technologies for use in the textile and pulp-milling industry and describes the challenges and recent advances aimed at achieving better biodegradation methods featuring these microbial catalysts. The principal points to be discussed are (1) Streptomyces' enzymes for use in dye decolorization and lignocellulosic biodegradation, (2) biotechnological processes for textile and pulp and paper waste treatment and (3) challenges and advances for textile and pulp and paper effluent treatment., (© 2023 The Authors. Microbial Biotechnology published by Applied Microbiology International and John Wiley & Sons Ltd.)

A variety of terms, such as "antiepileptic," "anticonvulsant," and "antiseizure" have been historically applied to medications for the treatment of seizure disorders. Terminology is important because using terms that do not accurately reflect the action of specific treatments may result in a misunderstanding of their effects and inappropriate use. The present International League Against Epilepsy (ILAE) position paper used a Delphi approach to develop recommendations on English‐language terminology applicable to pharmacological agents currently approved for treating seizure disorders. There was consensus that these medications should be collectively named "antiseizure medications". This term accurately reflects their primarily symptomatic effect against seizures and reduces the possibility of health care practitioners, patients, or caregivers having undue expectations or an incorrect understanding of the real action of these medications. The term "antiseizure" to describe these agents does not exclude the possibility of beneficial effects on the course of the disease and comorbidities that result from the downstream effects of seizures, whenever these beneficial effects can be explained solely by the suppression of seizure activity. It is acknowledged that other treatments, mostly under development, can exert direct favorable actions on the underlying disease or its progression, by having "antiepileptogenic" or "disease‐modifying" effects. A more‐refined terminology to describe precisely these actions needs to be developed. [ABSTRACT FROM AUTHOR]

Decision prediction based on neurophysiological signals is of great application value in many real‐life situations, especially in human–AI collaboration or counteraction. Single‐trial analysis of electroencephalogram (EEG) signals is a very valuable step in the development of an online decision‐prediction system. However, previous EEG‐based decision‐prediction methods focused mainly on averaged EEG signals of all decision‐making trials to predict an individual's general decision tendency (e.g., risk seeking or aversion) over a period rather than on a specific decision response in a single trial. In the present study, we used a rock–paper–scissors game, which is a common multichoice decision‐making task, to explore how to predict participants' single‐trial choice with EEG signals. Forty participants, comprising 20 females and 20 males, played the game with a computer player for 330 trials. Considering that the decision‐making process of this game involves multiple brain regions and neural networks, we proposed a new algorithm named common spatial pattern‐attractor metagene (CSP‐AM) to extract CSP features from different frequency bands of EEG signals that occurred during decision making. The results showed that a multilayer perceptron classifier achieved an accuracy significantly exceeding the chance level among 88.57% (31 of 35) of participants, verifying the classification ability of CSP features in multichoice decision‐making prediction. We believe that the CSP‐AM algorithm could be used in the development of proactive AI systems. [ABSTRACT FROM AUTHOR]

J‐aggregation and H‐aggregation are identified as two classical models of functionally oriented non‐covalent interactions, and significant attention has been drawn by researchers. However, due to the scarcity of single‐crystal examples of H‐aggregation, a comprehensive understanding of the relationship between its stacking mode and optical behaviour has been hindered. In recent studies, two polyaromatic Schiff base compounds, Cl‐Salmphen and H‐Salmphen, were successfully synthesized, and both were found to exhibit H‐aggregation. In the findings, H‐Salmphen was shown to display typical C─H···π interactions, characteristic of Aggregation‐Induced Emission (AIE) active molecules, whereas its halogenated counterpart was identified as behaving similar to Aggregation‐Caused Quenching (ACQ) active molecules. These types of results suggest that identical intermolecular interactions can produce differing optical behaviours. Light was shed, at least in part, on the formation mechanisms of H‐type aggregates and their luminescence properties from these observations. Additionally, the high optical signal‐to‐noise ratio inherent to H‐aggregates was utilized for the exploration of water content detection. As an outcome, a high‐performance fluorescent filter paper was developed, enabling easy real‐time detection using a smartphone. [ABSTRACT FROM AUTHOR]

This paper identifies physical properties of an interesterified palm‐based fat (EIEPO) that predict oil binding capacity (OBC). A 100% EIEPO sample, 50% EIEPO sample diluted with 50% soybean oil (SBO), and a 20% EIEPO sample diluted with 80% SBO were used to test how saturation level impacts OBC. All samples were crystallized using either a fast (6.4°C/min) or slow (0.1°C/min) cooling rate as well as with or without the application of high‐intensity ultrasound (HIU; 20 kHz) to generate a wide range of physical properties. Immediately after crystallization, the sample's physical properties, including crystal microstructure, solid fat content (SFC), viscoelasticity (G′, G″, and δ), melting behavior, hardness, and OBC (centrifuge method) were quantified. The samples were then stored for 48 h at 22 and 5°C and the aforementioned physical properties were measured again, with one additional measurement for the samples stored at 5°C—OBC using a filter paper method (OBCp). The results indicate that OBC can be optimized in a palm‐based fat by modifying the physical properties which was achieved via the processing conditions. Both measurements of OBC were significantly correlated with SFC, hardness, δ, and enthalpy. A model was developed to predict a sample's OBCc using the following dominant variables—SFC, hardness, peak temperature, enthalpy, and the number of crystals. These results suggest that OBC can be predicted using a sample's SFC, hardness, peak temperature, enthalpy, and number of crystals and that SFC, hardness, and enthalpy are main drivers of OBC. [ABSTRACT FROM AUTHOR]

This mini‐review summarises and discusses recent findings form the literature on the degradation of carbon‐based electrodes for vanadium redox flow batteries (VRFBs). It becomes evident that the focus of current investigations is on carbon paper, carbon felt and graphite felt electrodes, which is understandable from a practical point of view. However, the structural complexity of these materials often prohibits doubtless attribution of observed performance reduction (or increase) to changes in the electrode materials. Among the discussed major causes for degradation are formation or change of surface functional groups, changes in the carbon sp2/sp3 ratio, intercalation of ions as well as formation of inhibiting adsorbates. In order to gain deeper insight into the changes of carbon electrodes in VRFBs under relevant operation conditions, the authors suggest reducing complexity of the investigated materials and applying in situ‐studies under well‐defined and controllable conditions on model electrodes. These studies then should be extended towards more practical systems and may finally help to reduce degradation phenomena including enhanced overvoltages and thus could improve cycling and energy efficiency as well as long‐term stability of vanadium redox flow batteries. [ABSTRACT FROM AUTHOR]

X-ray spectroscopy is a valuable technique for the study of many materials systems. Characterizing reactions in situ and operando can reveal complex reaction kinetics, which is crucial to understanding active site composition and reaction mechanisms. In this project, the design, fabrication and testing of an open-source and easy-to-fabricate electrochemical cell for in situ electrochemistry compatible with X-ray absorption spectroscopy in both transmission and fluorescence modes are accomplished via windows with large opening angles on both the upstream and downstream sides of the cell. Using a hobbyist computer numerical control machine and free 3D CAD software, anyone can make a reliable electrochemical cell using this design. Onion-like carbon nanoparticles, with a 1:3 iron-to-cobalt ratio, were drop-coated onto carbon paper for testing in situ X-ray absorption spectroscopy. Cyclic voltammetry of the carbon paper showed the expected behavior, with no increased ohmic drop, even in sandwiched cells. Chronoamperometry was used to apply 0.4 V versus reversible hydrogen electrode, with and without 15 min of oxygen purging to ensure that the electrochemical cell does not provide any artefacts due to gas purging. The XANES and EXAFS spectra showed no differences with and without oxygen, as expected at 0.4 V, without any artefacts due to gas purging. The development of this open-source electrochemical cell design allows for improved collection of in situ X-ray absorption spectroscopy data and enables researchers to perform both transmission and fluorescence simultaneously. It additionally addresses key practical considerations including gas purging, reduced ionic resistance and leak prevention. [ABSTRACT FROM AUTHOR]

We present a method to fabricate handcrafted thermoelectric devices on standard office paper substrates. The devices are based on thin films of WS2, Te, and BP (P‐type semiconductors) and TiS3 and TiS2 (N‐type semiconductors), deposited by simply rubbing powder of these materials against paper. The thermoelectric properties of these semiconducting films revealed maximum Seebeck coefficients of (+1.32 ± 0.27) mV K−1 and (−0.82 ± 0.15) mV K−1 for WS2 and TiS3, respectively. Additionally, Peltier elements were fabricated by interconnecting the P‐ and N‐type films with graphite electrodes. A thermopower value up to 6.11 mV K−1 was obtained when the Peltier element were constructed with three junctions. The findings of this work show proof‐of‐concept devices to illustrate the potential application of semiconducting van der Waals materials in future thermoelectric power generation as well as temperature sensing for low‐cost disposable electronic devices. [ABSTRACT FROM AUTHOR]

This article discusses a literature search that was conducted to identify the top 100 cited papers in cutaneous lupus erythematosus (CLE). CLE is a subset of lupus erythematosus characterized by autoimmune-mediated skin manifestations. The search yielded 5750 articles, and the top 100 most cited articles were categorized into basic science research, clinical research, or new treatment categories. The majority of the top cited articles were clinical research articles, indicating their impact on research and clinical practice. The findings reveal important contributions to understanding CLE's pathogenesis, epidemiology, and management, providing valuable insights for researchers, clinicians, and funders in the field of autoimmune skin disorders. [Extracted from the article]

Health monitoring using wearable artificial intelligence (AI) sensors with sensing and cognitive capabilities has garnered significant attention. The development of self‐contained AI sensors that can operate with low power consumption, akin to the human brain, is necessary. Physical reservoir computing (PRC), which mimics the human brain using physical phenomena, offers a low‐power consumption architecture. Nevertheless, creating a flexible and easily disposable sensors using PRC capable of processing optical signals with sub‐second response times suitable for biological signals presents a challenge. In this study, a disposable and flexible paper‐based optoelectronic synaptic devices are designed, which are composed of nanocellulose and ZnO nanoparticles, for PRC. This device exhibits synaptic photocurrent in response to optical input. To assess its performance, a classification and time‐series forecasting tasks are conducted. The memory capacity of short‐term memory task, indicating the device's ability to store past information, is 1.8. The device can recognize handwritten digits with an accuracy of 88%. These results highlight the potential of the device for PRC. In addition, subjecting the device to 1000 rounds of bending do not affect its accuracy. Furthermore, the device burn in a few seconds, much like regular office paper, demonstrating its disposability. [ABSTRACT FROM AUTHOR]

This article is a guest editorial for the IET Radar, Sonar & Navigation journal, focusing on selected papers from the RADAR 2022 conference held in Edinburgh, UK. The conference provided an opportunity for radar specialists from 22 countries to explore the latest developments in radar systems. Key topics discussed at the conference included new radar trends, target detection (with a focus on drones), low-frequency radar, and cognitive radar. The special issue contains 17 papers based on extended work presented at the conference, covering topics such as multistatic radar, passive radar, target signatures, and advanced radar processing techniques. The authors hope that this special issue will serve as a valuable resource for further research in the field. [Extracted from the article]

Objectives: This study aims to analyze and visualize the top dental papers from 2012 to 2022 using data from essential science indicators (ESIs). Materials and Methods: The present study was conducted using library and retrospective bibliometric analysis methods. Additionally, a science map has been created. Web of Science was searched on January 18, 2023. The results were limited to the top papers in ESIs. The bibliometric information of the top papers was evaluated. Next, the VOSviewer was used to perform a co‐occurrence analysis and visualize data. Results: The findings showed that Mariano Belén Sanz and Maurizio S. Tonetti were the top two authors. The University of London and the University of Bern had the highest number of articles. These articles were published in 55 journals. According to the analysis of keyword co‐occurrence, the most frequently used keywords in the field of dentistry include "periodontitis," "dental implants," "periodontal disease," "mechanical properties," "peri‐implantitis," "oral health," "dental caries," "dental materials," "3D printing." Conclusion: The findings of this study enable readers to pinpoint the authors, organizations, countries, and journals that have made the biggest contributions to the list of the most often cited dentistry papers. In medicine, bibliometric citation analysis is frequently used to assist researchers in learning the fundamentals of a subject and pinpoint subtopics of broad interest for additional study. [ABSTRACT FROM AUTHOR]

Various electrocatalysts are extensively examined for their ability to selectively produce desired products by electrochemical CO2 reduction reaction (CO2RR). However, an efficient CO2RR electrocatalyst doesn't ensure an effective co‐catalyst on the semiconductor surface for photoelectrochemical CO2RR. Herein, Bi2S3 nanorods are synthesized and electrochemically reduced to Bi nanoplates that adhere to the substrates for application in the electrochemical and photoelectrochemical CO2RR. Compared with commercial‐Bi, the Bi2S3‐derived Bi (S‐Bi) nanoplates on carbon paper exhibit superior electrocatalytic activity and selectivity for formate (HCOO−) in the electrochemical CO2RR, achieving a Faradaic efficiency exceeding 93%, with minimal H2 production over a wide potential range. This highly selective S‐Bi catalyst is being employed on the Si photocathode to investigate the behavior of electrocatalysts during photoelectrochemical CO2RR. The strong adhesion of the S‐Bi nanoplates to the Si nanowire substrate and their unique catalytic properties afford exceptional activity and selectivity for HCOO− under simulated solar irradiation. The selectivity observed in electrochemical CO2RR using the S‐Bi catalyst correlates with that seen in the photoelectrochemical CO2RR system. Combined pulsed potential methods and theoretical analyses reveal stabilization of the OCHO* intermediate on the S‐Bi catalyst under specific conditions, which is critical for developing efficient catalysts for CO2‐to‐HCOO− conversion. [ABSTRACT FROM AUTHOR]

Origami robots, inspired by an ancient form of paper folding art, are capable of achieving high displacement in a lightweight and compact design that conventional robots can hardly attain. It, however, remains a challenge to drive origami robots with in situ active materials that imply minimal added mass and complexity and can be easily controlled to achieve multiple actuation modalities. Herein, inspired by the Twisted Tower origami structure, dielectrophoretic liquid zipping actuation concept is employed to develop a modular architecture, capable of achieving complicated motions with multiple degrees of freedom (DoF). The experimental results show a maximum of 3.9 degrees tilting per layer toward any desired direction, a 56.1% contraction of the original length, and 5.4 degrees twisting per layer. Each layer can generate a maximum contractile force of 1.03 N with a maximum 64.7% power efficiency and 2.775 W kg−1 power‐to‐weight ratio. A modified heterochiral arrangement of this modular actuator is proposed to enhance controllability across various movement modes. Its use in robotic‐wrist‐like actuation has been demonstrated, highlighting its significant potential for integration into soft robotic multi‐DoF structures, such as continuum arms. [ABSTRACT FROM AUTHOR]

Sodium‐carbon dioxide (Na‐CO2) batteries are regarded as promising energy storage technologies because of their impressive theoretical energy density and CO2 reutilization, but their practical applications are restricted by uncontrollable sodium dendrite growth and poor electrochemical kinetics of CO2 cathode. Constructing suitable multifunctional electrodes for dendrite‐free anodes and kinetics‐enhanced CO2 cathodes is considered one of the most important ways to advance the practical application of Na‐CO2 batteries. Herein, RuO2 nanoparticles encapsulated in carbon paper (RuCP) are rationally designed and employed as both Na anode host and CO2 cathode in Na‐CO2 batteries. The outstanding sodiophilicity and high catalytic activity of RuCP electrodes can simultaneously contribute to homogenous Na+ distribution and dendrite‐free sodium structure at the anode, as well as strengthen discharge and charge kinetics at the cathode. The morphological evolution confirmed the uniform deposition of Na on RuCP anode with dense and flat interfaces, delivering enhanced Coulombic efficiency of 99.5% and cycling stability near 1500 cycles. Meanwhile, Na‐CO2 batteries with RuCP cathode demonstrated excellent cycling stability (>350 cycles). Significantly, implementation of a dendrite‐free RuCP@Na anode and catalytic‐site‐rich RuCP cathode allowed for the construction of a symmetric Na‐CO2 battery with long‐duration cyclability, offering inspiration for extensive practical uses of Na‐CO2 batteries. [ABSTRACT FROM AUTHOR]

Ecologists have worked to ascribe function to the variation found in plant populations, communities and ecosystems across environments for at least the past century. The vast body of research in functional ecology has drastically improved understanding of how individuals respond to their environment, communities are assembled and ecosystems function. However, with limited exceptions, few studies have quantified differences in plant function during the earliest stages of the plant life cycle, and fewer have tested how this early variability shapes populations, communities and ecosystems.Drawing from the literature and our collective experience, we describe the current state of knowledge in seedling functional ecology and provide examples of how this subdiscipline can enrich our fundamental understanding of plant function across levels of organisation. To inspire progressive work in this area, we also outline key considerations involved in seedling functional research (who, what, when, where and how to measure seedling traits) and identify remaining challenges and gaps in understanding around methodological approaches.Within this conceptual synthesis, we highlight three critical areas in seedling ecology for future research to target. First, given wide variation in the definition of a 'seedling', we provide a standard definition based on seed reserve dependence while emphasising the need to measure ontogenetic variation more clearly both within and following the seedling stage. Second, studies demonstrate that seedlings can be studied in multiple media (e.g. soil, agar, filter paper) and conditions (e.g. field, greenhouse, laboratory). We recommend that researchers select methods based on explicit goals, yet follow standard guidelines to reduce methodological noise across studies. Third, research is critically needed to assess the implications of different methodologies on trait measurement and compatibility across studies.By highlighting the importance of seedling functional ecology and suggesting pathways to address key challenges, we aim to inspire future research that generates useful and comparable data on seedling functional ecology. This work is critical to explain variation within and among populations, communities and ecosystems and integrate this most vulnerable stage of plant life into ecological frameworks. [ABSTRACT FROM AUTHOR]

High‐barrier performance, especially under extreme working conditions, is the key to replacing other types of packaging materials with paper‐based materials. In this paper, two biomass‐based polymers, sodium alginate (SA), and chitosan, were used to form a barrier coating with silicone emulsions to prepare a high‐performance paper‐based barrier material. By double coating, the water and oilproof functions were superimposed. The two prepared coated papers were characterized by infrared spectroscopy analysis, contact angle test, and scanning electron microscopy analysis, while their water resistance, oil resistance, thermal oil resistance, and thermal stability were tested. The water and oil repellency were achieved by double coating. The Cobb value of the chitosan‐silicone emulsion‐coated paper reached 5.3 g/m2, with a Kit grade of Level 12, and could block the penetration of castor oil at 80°C within 24 h. The Cobb value of the sodium alginate‐silicone emulsion‐coated paper was 41.6 g/m2, much higher than that of the uncoated paper, with a Kit grade of up to Level 10, which could slow down the rate of castor oil penetration at 80°C within 24 h. The test results showed that there was no chemical reaction between the paper‐based coatings, and the coated paper surface had good film formation, while the double coating method increased the thermal decomposition temperature of the overall barrier coating, effectively improving the thermal stability of the coating and achieving high‐barrier performance at lower cost and under extreme working conditions. Highlights: Water and oil resistance under extreme operating conditions.High‐performance paper‐based barrier materials.Dual‐layer coating method for water and oil repellency.High‐barrier performance at lower cost.Excellent hot oil resistance and thermal stability. [ABSTRACT FROM AUTHOR]

We apply bibliometric analysis to the review papers published in the finance domain, considering 264 review and qualitative studies. The approach applied in this study involves using review studies published in finance literature from 2000 to 2022, predominantly aiming at the pedigree of such papers and unfolding the renaissance experienced by such papers in recent years. We apply bibliometric analysis to know the most influential countries, authors, institutions, and journals publishing review papers. Results of the study identified four literature review clusters: The first cluster is related to 'corporate finance and financial markets', the second cluster combines the studies related to 'financial innovations and Fintech', the third cluster is related to 'social finance and financial inclusion', and finally, the fourth cluster combines the studies related to 'CSR and corporate governance'. We conclude that the bibliometric analysis and literature review papers are critical for identifying and highlighting the emerging problems in finance and motivating future academics to pursue further investigations and provide solutions. [ABSTRACT FROM AUTHOR]

This study identifies important factors for designing an effective biomimetic paper-based fog harvesting substrate by examining the harvesting properties of different surfaces, including glass, polyethylene, and superhydrophobic paper. In laboratory-scale fogging tests, the wetting behavior of the substrates is characterized, and the importance of the tilt angle of the respective surface relative to the fog flow is elaborated. Because successful fog harvesting requires both efficient accumulation of water droplets on the surface (by condensation and collision) and sufficient but not excessive roll-off of the liquid, the amount of water finally collected is clearly related to the pinning effect, which should prevent the smallest droplets from being carried away by the wind but must not lead to full and permanent wetting of the surface. Coalescence is identified as a major phenomenon to improve droplet roll-off. In this context, superhydrophobic paper indicates to be a more effective water collector than glass or polyethylene, especially when oriented vertically, since it allows the droplets to roll off very efficiently. Finally, the addition of glass particles to the superhydrophobic coating is proposed as a means of enhancing pinning and improving the fog harvesting efficiency. [ABSTRACT FROM AUTHOR]

Research on the diverse benefits of nature to people is characterised by a broad range of disciplines involved, encompassing a variety of approaches, methods and terminologies. While a diversity of approaches is valuable, it can lead to difficulties in integrating and sharing findings, and could form a barrier to effective knowledge exchange, hindering the development and applications of research outputs.As a starting point for this scoping review, we chose four broad research areas (medicine, psychology, education and environment), selected to represent disparate approaches to research on the benefits of nature to people, within and across which to explore overlap in citations and terms used to describe nature.We conducted expert consultation and a snowball‐based approach to source publications, resulting in a sample of 210 papers spanning multiple disciplines within each of our four research areas. For each paper, we recorded the discipline of the journal in which it was published (publishing discipline), the discipline of its first author (first‐author discipline), the number of times journals of each discipline were cited in their bibliographies (cited discipline) and the term(s) used in the paper's title or abstract to describe the aspect of nature being explored (nature term).The cited disciplines were significantly different between publishing and first‐author disciplines, with papers from psychology, education and public health citing distinct communities of papers. However, disciplines generally cite a wide range of other disciplines, with articles in medical journals being particularly broadly cited.Nature terms were significantly different between publishing and first‐author disciplines, with some degree of consistency within disciplines (e.g. education papers consistently used a narrow range of nature terms, such as 'outdoor learning'). However, there was a notably high range of nature terms used within psychology and public health papers, indicating that research from these disciplines may be particularly prone to being overlooked by search strings.The wide range of disciplines cited is encouraging, since this indicates that diverse research areas are generally aware of each other's work. However, to avoid unnecessary expansion of nature terms and support searchability, we propose four key terms for nature: ('outdoor learning' OR 'outdoor education'), ('nature' OR 'natural'), ('green space' OR 'greenspace') and ('biodiversity' or 'trees'), which could be used across disciplines. We particularly propose that at least one of these be included in every paper, and all four should be included in review search strings. This is likely to result in a better understanding of the valuable, disparate contributions made by different disciplines to this expanding and important topic. Read the free Plain Language Summary for this article on the Journal blog. Read the free Plain Language Summary for this article on the Journal blog. [ABSTRACT FROM AUTHOR]

Climate change is impacting many aspects of human life in many ways. In Ghana, climate change knowledge remains low and discussions linking climate change and health are scarce. In this paper, authors contribute to the shaping of discussions about climate and health with a focus on how climate change increases certain ailments. First, the paper addresses the need for research in Ghanaian communities to link climate change and health. Second, the paper suggests the development of policies to address the link. Third, public health educators are advised in this paper to educate the public. Plain Language Summary: The paper addresses the link between climate change and health. Authors call for this link to be considered in Ghana and policies developed to meet worsening health problems. Key Points: Climate change is an important driver of negative health outcomesClimate change exacerbates the already precarious health inequality in GhanaResearchers, policymakers, and public health educators should focus on the impact of climate change on health in Ghana [ABSTRACT FROM AUTHOR]

MXene‐based thermal camouflage materials have gained increasing attention due to their low emissivity, however, the poor anti‐oxidation restricts their potential applications under complex environments. Various modification methods and strategies, e.g., the addition of antioxidant molecules and fillers have been developed to overcome this, but the realization of long‐term, reliable thermal camouflage using MXene network (coating) with excellent comprehensive performance remains a great challenge. Here, a MXene‐based hybrid network comodified with hyaluronic acid (HA) and hyperbranched polysiloxane (HSi) molecules is designed and fabricated. Notably, the presence of appreciated HA molecules restricts the oxidation of MXene sheets without altering infrared stealth performance, superior to other water‐soluble polymers; while the HSi molecules can act as efficient cross‐linking agents to generate strong interactions between MXene sheets and HA molecules. The optimized MXene/HA/HSi composites exhibit excellent mechanical flexibility (folded into crane structure), good water/solvent resistance, and long‐term stable thermal camouflage capability (with low infrared emissivity of ≈0.29). The long‐term thermal camouflage reliability (≈8 months) under various outdoor weathers and the scalable coating capability of the MXene‐coated textile enable them to disguise the IR signal of various targets in complex environments, indicating the great promise of achieved material for thermal camouflage, IR stealth, and counter surveillance. [ABSTRACT FROM AUTHOR]

The out‐of‐sight groundwater and visible but much less extensive surface waters on land constitute a linked terrestrial water system around the planet. Research is crucial for our understanding of these terrestrial water system links and interactions with other geosystems and key challenges of Earth System change. This study uses a scoping review approach to discuss and identify topical, methodological and geographical gaps and priorities for research on these links and interactions of the coupled ground‐ and surface water (GSW) system at scales of whole‐catchments or greater. Results show that the large‐scale GSW system is considered in just a small part (0.4%–0.8%) of all studies (order of 105 for each topic) of either groundwater or surface water flow, storage, or quality at any scale. While relatively many of the large‐scale GSW studies consider links with the atmosphere or climate (8%–43%), considerably fewer address links with: (a) the cryosphere or coastal ocean as additional interacting geosystems (5%–9%); (b) change drivers/pressures of land‐use, water use, or the energy or food nexus (2%–12%); (c) change impacts related to health, biodiversity or ecosystem services (1%–4%). Methodologically, use of remote sensing data and participatory methods is small, while South America and Africa emerge as the least studied geographic regions. The paper discusses why these topical, methodological and geographical findings indicate important research gaps and priorities for the large‐scale coupled terrestrial GSW system and its roles in the future of the Earth System. Plain Language Summary: The water on the land surface (surface water) and that beneath it (groundwater), along with the water that is continuously and increasingly used and managed in human societies, are connected and constitute a coherent natural‐social water system around the world. Many unknowns and open questions remain for how the small‐scale variations add up to large‐scale variability and change of this water system on land, as an integral part of the whole Earth System. Relevant research is crucial for reducing the unknowns and answering the questions, and this study's scoping review aims to assess how they have been addressed in published research so far. The aim is to identify key research gaps and priorities for further research on how the integrated water system on land functions and evolves on large scales, from whole hydrological catchments and in multiple catchments around the world up to global scale. The scoping review results show key research gaps and priorities to be the coupling of surface water and groundwater on land, and the interactions of this coupled water system with other parts and major challenges of the Earth System. Geographically, the gaps and priorities emerge as particularly large and urgent for South America and Africa. Key Points: Coupling of the ground‐surface water system is a key gap in terrestrial water research, particularly at large scalesResearch on terrestrial water interactions with other geospheres and key challenges of Earth System change is rare but impactfulMajor geographic gaps in research on the large‐scale coupled terrestrial water system emerge for South America and Africa [ABSTRACT FROM AUTHOR]

This document is a guest editorial from the journal IET Power Electronics, discussing advances in conductive and wireless powering and charging technologies for transportation applications. The editorial highlights the increasing prevalence of charging systems for electric transport, including both conductive and wireless options. The development of these technologies is not limited to the automotive field, but also extends to industrial handling, aerial, and submarine vehicles. The special issue of the journal includes nine accepted papers that focus on power electronics control and the development of innovative conversion structures for these charging technologies. The papers cover topics such as wireless systems in different media, comparative analysis of wireless technologies, design approaches for inductive WPT systems, control strategies for WPT applications, and mitigation of leakage magnetic fields. One paper also addresses conductive electric vehicle fast charging. The editorial concludes by emphasizing the relevance of electric vehicle charging and power systems in today's world and expressing gratitude to the authors and reviewers who contributed to the special issue. The biographies of the guest editors are also provided. [Extracted from the article]

Lead‐free halide perovskites possess excellent photoelectric properties, making them widely used in the photoelectric fields. Herein, lead‐free double perovskite crystals (PCs) doped with manganese (Cs2NaInCl6:Mn2+) are successfully prepared by the more energy‐efficient crystallization method. The crystals emit bright orange‐red light under the ultraviolet (UV) lamp, showing unique optical properties. They have the highest photoluminescence quantum yield of 42.91%. The white light‐emitting diodes (LEDs) are fabricated using these perovskite crystals, which show a color rendering index of 92 and external quantum efficiency (EQE) as high as 16.3%. Furtherly, perovskite‐modified fiber paper made of aramid chopped fibers (ACFs) and polyphenylene sulfide (PPS) exhibited fluorescent properties under different conditions. This paper combines fiber composite technology with PPS fiber filter bags, which are widely used in environmental protection, for the first time and demonstrates functional fiber filter bags with fluorescent characteristics. This filter bag provides an idea for the automatic detection of industrial filtration. Meanwhile, after being exposed to industrial waste gas for 60 h, the filter bag can maintain superior fluorescence performance. In this study, lead‐free double perovskites are synthesized using an efficient method for preparing high‐performance LEDs and high‐stability fluorescent fibers. Concurrently, the application of perovskites in environmental protection is expanded. [ABSTRACT FROM AUTHOR]