Search

When Synthetic Aperture Radar (SAR) observes complex structural targets such as oil tanks, it is easily interfered with by multipath signals, resulting in a large number of multipath ghost images in the SAR image, which seriously affect the image clarity. To address this problem, this paper proposes a multi-aspect multipath suppression method. This method observes complex structural targets from different azimuth angles to obtain a multi-aspect image sequence and then uses the difference in sequence features between the target image and the multipath ghost image with respect to aspect angle to separate them. This paper takes a floating-roof oil tank as an example to analyze the propagation path and the ghost image characteristics of multipath signals under different observation aspects. We conclude that the scattering center of the multipath ghost image changes with the radar observation aspect, whereas the scattering center of the target image does not. This paper uses the Robust Principal Component Analysis (RPCA) method to decompose the image sequence matrix into two parts: a sparse matrix and a low-rank matrix. The low-rank matrix represents the aspect-stable principal component in the image sequence; that is, the real scattering center. The sparse matrix represents the part of the image sequence that deviates from the principal component; that is, the signal that varies with aspect, mainly including multipath signals, sidelobes, anisotropic signals, etc. By reconstructing the low-rank matrix and the sparse matrix, respectively, we can obtain the image after multipath signal suppression and also the multipath ghost image. Both the target and the multipath signal provide useful information. The image after multipath signal suppression is useful for obtaining the structural information of the target, and the multipath ghost image is useful for analyzing the multipath phenomenon of the complex structure target. This paper conducts experimental verification using real airborne SAR data of an external floating roof oil tank and compares three methods: RPCA, PCA, and sub-aperture fusion method. The experiment shows that the RPCA method can better separate the target image and the multipath ghost image. [ABSTRACT FROM AUTHOR]

Dedicated to synchronously acquiring large-area, high-precision, and multi-scale ocean wind and wave information, a novel concept of a spaceborne ocean microwave dual-function integrated sensor is proposed in this paper. It integrates the functions of a scatterometer and SAR by sharing a single phased-array antenna. An overview of the scientific requirements and motivations for the sensor are outlined firstly. In order to fulfill the observation requirements of both the functions, the constraints on the system parameters such as frequency, antenna size, and incidence angle are analyzed. Then, the selection principles of these parameters are discussed within the limitations of antenna area, bandwidth, available time, and cost. Additionally, the constraints on the time sequence of transmitting and receiving pulses are derived to ensure that there is no conflict when the two functions operate simultaneously. Subsequently, a method for jointly designing the pulse repetition frequency (PRF) of both the functions is introduced, along with zebra maps to verify its effectiveness. At the end of the paper, the system and performance parameters of the sensor are given for further insight into it. [ABSTRACT FROM AUTHOR]

Ship detection is a significant issue in remote sensing based on Synthetic Aperture Radar (SAR). This paper combines the advantages of a steady constant false alarm rate (CFAR) detector and a knowledge-oriented Gradient Boosting Decision Tree (GBDT) classifier to achieve the location and the classification of ship candidates. The steady CFAR detector smooths the image by a moving-average filter and models the probability distribution of the smoothed clutter as a Gaussian distribution. The mean and the standard deviation of the Gaussian distribution are estimated according to the left half of the histogram to remove the effect of land, ships, and other targets. From the Gaussian distribution and a preset constant false alarm rate, a threshold is obtained to segment land, ships, and other targets from the clutter. Then, a series of morphological operations are introduced to eliminate land and extract ships and other targets, and an active contour algorithm is utilized to refine ships and other targets. Finally, ships are recognized from other targets by a knowledge-oriented GBDT classifier. Based on the brain-like ship-recognition process, we change the way of the decision-tree generation and achieve a higher classification performance than the original GBDT. The results on the AIRSARShip-1.0 dataset demonstrate that this scheme has a competitive performance against deep learning, especially in the detection of offshore ships. [ABSTRACT FROM AUTHOR]

The precise tie-points (TPs) on synthetic aperture radar (SAR) images are a critical cornerstone in the global digital elevation model (DEM) and digital ortho map (DOM) production process. While there are abundant studies on SAR TPs matching, improvement opportunities persist in large areas. The correspondences have pixel-level errors during geocoding, which result in misalignment between global products. Consequently, this paper proposed a robust method for SAR images TPs matching, which consists of three key steps: (1) interest point extraction based on the dynamic Harris area entropy (DHAE) grid; (2) adaptive determination of template size; (3) normalized cross correlation (NCC) template matching. DHAE is a regional texture information grid based on the SAR-Harris map, and it is achieved through dynamic block division. Generating the DHAE grid over SAR images enables the extraction of interest points that have regional feature representation and distribution uniformity. A variable-size matching template is adaptively determined based on DHAE to enhance template quality while maintaining computational efficiency. Subsequently, the NCC algorithm is employed to find subpixel-precise correspondences. The proposed method is applied on TPs matching in 57 Terra-SAR images, which cover a large geographical area. Furthermore, the overlapping area is partitioned into five segments according to different coverage types. The experimental results demonstrate that the proposed method outperforms other template matching methods. For all coverage types, the proposed method exhibits high-precision sub-pixel results that reach up to 38.64% in terms of the relative positioning error (RPE), particularly in texture-weak and large areas. [ABSTRACT FROM AUTHOR]

Three-dimensional SAR imaging of urban buildings is currently a hotspot in the research area of remote sensing. Synthetic Aperture Radar (SAR) offers all-time, all-weather, high-resolution capacity, and is an important tool for the monitoring of building health. Buildings have geometric distortion in conventional 2D SAR images, which brings great difficulties to the interpretation of SAR images. This paper proposes a novel Rotating SAR (RSAR) mode, which acquires 3D information of buildings from two different angles in a single rotation. This new RSAR mode takes the center of a straight track as its rotation center, and obtains images of the same facade of a building from two different angles. By utilizing the differences in geometric distortion of buildings in the image pair, the 3D structure of the building is reconstructed. Compared to the existing tomographic SAR or circular SAR, this method does not require multiple flights in different elevations or observations from varying aspect angles, and greatly simplifies data acquisition. Furthermore, both simulation analysis and actual data experiment have verified the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

This paper presents a statistical approach to identify the underlying roughness characteristics in synthetic aperture radar (SAR) intensity data. The physical modeling of this kind of data allows the use of the Gamma distribution in the presence of fully developed speckle, i.e., when there are infinitely many independent backscatterers per resolution cell, and none dominates the return. Such areas are often called "homogeneous" or "textureless" regions. The G I 0 distribution is also a widely accepted law for heterogeneous and extremely heterogeneous regions, i.e., areas where the fully developed speckle hypotheses do not hold. We propose three test statistics to distinguish between homogeneous and inhomogeneous regions, i.e., between gamma and G I 0 distributed data, both with a known number of looks. The first test statistic uses a bootstrapped non-parametric estimator of Shannon entropy, providing a robust assessment in uncertain distributional assumptions. The second test uses the classical coefficient of variation (CV). The third test uses an alternative form of estimating the CV based on the ratio of the mean absolute deviation from the median to the median. We apply our test statistic to create maps of p-values for the homogeneity hypothesis. Finally, we show that our proposal, the entropy-based test, outperforms existing methods, such as the classical CV and its alternative variant, in identifying heterogeneity when applied to both simulated and actual data. [ABSTRACT FROM AUTHOR]

Synthetic aperture radar (SAR) change detection provides a powerful tool for continuous, reliable, and objective observation of the Earth, supporting a wide range of applications that require regular monitoring and assessment of changes in the natural and built environment. In this paper, we introduce a novel SAR image change detection method based on principal component analysis and two-level clustering. First, two difference images of the log-ratio and mean-ratio operators are computed, then the principal component analysis fusion model is used to fuse the two difference images, and a new difference image is generated. To incorporate contextual information during the feature extraction phase, Gabor wavelets are used to obtain the representation of the difference image across multiple scales and orientations. The maximum magnitude across all orientations at each scale is then concatenated to form the Gabor feature vector. Following this, a cascading clustering algorithm is developed within this discriminative feature space by merging the first-level fuzzy c-means clustering with the second-level neighbor rule. Ultimately, the two-level combination of the changed and unchanged results produces the final change map. Five SAR datasets are used for the experiment, and the results show that our algorithm has significant advantages in SAR change detection. [ABSTRACT FROM AUTHOR]

This paper proposes a texture-enhanced network (TENet) for intertidal sediment and habitat classification using multiband multipolarization synthetic aperture radar (SAR) images. The architecture introduces the texture enhancement module (TEM) into the UNet framework to explicitly learn global texture information from SAR images. The study sites are chosen from the northern part of the intertidal zones in the German Wadden Sea. Results show that the presented TENet model is able to detail the intertidal surface types, including land, seagrass, bivalves, bright sands/beach, water, sediments, and thin coverage of vegetation or bivalves. To further assess its performance, we quantitatively compared our results from the TENet model with different instance segmentation models for the same areas of interest. The TENet model gives finer classification accuracies and shows great potential in providing more precise locations. [ABSTRACT FROM AUTHOR]

Due to the complex imaging mechanism of SAR images and the lack of multi-angle and multi-parameter real scene SAR target data, the generalization performance of existing deep-learning-based synthetic aperture radar (SAR) image target detection methods are extremely limited. In this paper, we propose an unsupervised domain-adaptive SAR ship detection method based on cross-domain feature interaction and data contribution balance. First, we designed a new cross-domain image generation module called CycleGAN-SCA to narrow the gap between the source domain and the target domain. Second, to alleviate the influence of complex backgrounds on ship detection, a new backbone using a self-attention mechanism to tap the potential of feature representation was designed. Furthermore, aiming at the problems of low resolution, few features and easy information loss of small ships, a new lightweight feature fusion and feature enhancement neck was designed. Finally, to balance the influence of different quality samples on the model, a simple and efficient E 1 2 I o U Loss was constructed. Experimental results based on a self-built large-scale optical-SAR cross-domain target detection dataset show that compared with existing cross-domain methods, our method achieved optimal performance, with the mAP reaching 68.54%. Furthermore, our method achieved a 6.27% improvement compared to the baseline, even with only 5% of the target domain labeled data. [ABSTRACT FROM AUTHOR]

Given the large volume of remote sensing images collected daily, automatic object detection and segmentation have been a consistent need in Earth observation (EO). However, objects of interest vary in shape, size, appearance, and reflecting properties. This is not only reflected by the fact that these objects exhibit differences due to their geographical diversity but also by the fact that these objects appear differently in images collected from different sensors (optical and radar) and platforms (satellite, aerial, and unmanned aerial vehicles (UAV)). Although there exists a plethora of object detection methods in the area of remote sensing, given the very fast development of prevalent deep learning methods, there is still a lack of recent updates for object detection methods. In this paper, we aim to provide an update that informs researchers about the recent development of object detection methods and their close sibling in the deep learning era, instance segmentation. The integration of these methods will cover approaches to data at different scales and modalities, such as optical, synthetic aperture radar (SAR) images, and digital surface models (DSM). Specific emphasis will be placed on approaches addressing data and label limitations in this deep learning era. Further, we survey examples of remote sensing applications that benefited from automatic object detection and discuss future trends of the automatic object detection in EO. [ABSTRACT FROM AUTHOR]

The characterization of landslides located in remote areas poses significant challenges due to the costs of reaching the sites and the lack of reliable subsurface data to constrain geological interpretations. In this paper, the advantages of combining field and remote sensing techniques to investigate the deformation and stability of rock slopes are demonstrated. The characterization of the Fels landslide, a large, slowly deforming rock slope in central Alaska, is described. Historical aerial imagery is used to highlight the relationship between glacier retreat and developing instability. Airborne laser scanning (ALS) and Structure-from-Motion (SfM) datasets are used to investigate the structural geological setting of the landslide, revealing a good agreement between structural discontinuities at the outcrop and slope scales. The magnitude, plunge, and direction of slope surface displacements and their changes over time are studied using a multi-temporal synthetic aperture radar speckle-tracking (SAR ST) dataset. The analyses show an increase in displacement rates (i.e., an acceleration of the movement) between 2010 and 2020. Significant spatial variations of displacement direction and plunge are noted and correlated with the morphology of the failure surface reconstructed using the vector inclination method (VIM). In particular, steeper displacement vectors were reconstructed in the upper slope, compared to the central part, thus suggesting a change in basal surface morphology, which is largely controlled by rock mass foliation. Through this analytical approach, the Fels landslide is shown to be a slow-moving, compound rockslide, the displacement of which is controlled by structural geological features and promoted by glacier retreat. [ABSTRACT FROM AUTHOR]

The Intermittent Small Baseline Subset approach to Interferometric Synthetic Aperture Radar data was originally devised as a way to recover information from regions with intermittent coherence, making it particularly useful in agricultural regions or those featuring significant vegetation. However, as modern data products grow in size, the increased computational complexity that this methodology demands makes processing more daunting. Here, we present a solution: leveraging the Bifrost data processing framework and GPUs, we analyze Sentinel-1 data covering a large region of northern California and are able to achieve dramatic speed-ups on the order of 300–400 times faster than CPU-bound implementations of ISBAS, processing the entire dataset in only 5 h. [ABSTRACT FROM AUTHOR]

On 20 May 2012, an Mw 5.8 earthquake, followed by an Mw 5.6 event nine days later, struck the Emilia-Romagna region in northern Italy, causing substantial damage and loss of life. Post-mainshock, several water-related phenomena were observed, such as changes in the groundwater levels in wells, the expulsion of sand–water mixtures, and widespread liquefaction evidence such as sand boils and water leaks from cracks. We analyzed the Earth's surface displacement during and after the Emilia 2012 seismic sequence using synthetic aperture radar images from the COSMO-SkyMed satellite constellation. This analysis revealed post-seismic ground subsidence between the Sant'Agostino and Mirabello villages. Specifically, the displacement time series showed a slight initial uplift followed by rapid subsidence over approximately four to five months. This widespread ground displacement pattern likely stemmed from the extensive liquefaction of saturated sandy layers at depth. This phenomenon typically induces immediate post-seismic subsidence. However, the observed asymptotic subsidence, reaching about 2.1 cm, suggested a time-dependent process related to post-liquefaction consolidation. To test this hypothesis, we analytically estimated the consolidation subsidence resulting from earthquake-induced excess pore pressure dissipation in the layered soil deposits. The simulated subsidence matched the observed data, further validating the significant role of excess pore pressure dissipation induced by earthquake loading in post-seismic ground subsidence. [ABSTRACT FROM AUTHOR]

Synthetic aperture radar (SAR) technology has emerged as a pivotal tool in viticulture, offering unique capabilities for various applications. This study provides a comprehensive overview of the current state-of-the-art applications of SAR in viticulture, highlighting its significance in addressing key challenges and enhancing viticultural practices. The historical evolution and motivations behind SAR technology are also provided, along with a demonstration of its applications within viticulture, showcasing its effectiveness in various aspects of vineyard management, including delineating vineyard boundaries, assessing grapevine health, and optimizing irrigation strategies. Furthermore, future perspectives and trends in SAR applications in viticulture are discussed, including advancements in SAR technology, integration with other remote sensing techniques, and the potential for enhanced data analytics and decision support systems. Through this article, a comprehensive understanding of the role of SAR in viticulture is provided, along with inspiration for future research endeavors in this rapidly evolving field, contributing to the sustainable development and optimization of vineyard management practices. [ABSTRACT FROM AUTHOR]

Excluding rough areas with surface rocks and craters is critical for the safety of landing missions, such as China's Chang'e-7 mission, in the permanently shadowed region (PSR) of the lunar south pole. Binned digital elevation model (DEM) data can describe the undulating surface, but the DEM data can hardly detect surface rocks because of median-averaging. High-resolution images from a synthetic aperture radar (SAR) can be used to map discrete rocks and small craters according to their strong backscattering. This study utilizes the You Only Look Once version 7 (YOLOv7) tool to detect varying-sized craters in SAR images. It also employs the Markov random field (MRF) algorithm to identify surface rocks, which are usually difficult to detect in DEM data. The results are validated by optical images and DEM data in non-PSR. With the assistance of the DEM data, regions with slopes larger than 10° are excluded. YOLOv7 and MRF are applied to detect craters and rocky surfaces and exclude regions with steep slopes in the PSRs of craters Shoemaker, Slater, and Shackleton, respectively. This study proves SAR images are feasible in the selection of landing sites in the PSRs for future missions. [ABSTRACT FROM AUTHOR]

Coastal sediment grain size is an important factor in determining coastal morphodynamics. In this study, we explore a novel approach for retrieving the median sediment grain size (D50) of gravel-dominated beaches using Synthetic Aperture Radar (SAR) spaceborne imagery. We assessed this by using thirty-six Sentinel-1 (C-band SAR) satellite images acquired in May and June 2022 and 2023, and three NovaSAR (S-band SAR) satellite images acquired in May and June 2022, for three different training sites and one test site across England (the UK). The results from the Sentinel-1 C-band data show strong positive correlations (R2 ≥ 0.75 ) between the D50 and the backscatter coefficients for 15/18 of the resultant models. The models were subsequently used to derive predictions of D50 for the test site, with the models which exhibited the strongest correlations resulting in Mean Absolute Errors (MAEs) in the range 2.26–5.47 mm. No correlation (R2 = 0.04) was found between the backscatter coefficients from the S-band NovaSAR data and D50. These results highlight the potential to derive near-real time estimates of coastal sediment grain size for gravel beaches to better inform coastal erosion and monitoring programs. [ABSTRACT FROM AUTHOR]

The Cyprus Continuously Operating Natural Hazards Monitoring and Prevention System, abbreviated CyCLOPS, is a national strategic research infrastructure devoted to systematically studying geohazards in Cyprus and the Eastern Mediterranean, Middle East, and North Africa (EMMENA) region. Amongst others, CyCLOPS comprises six permanent sites, each housing a Tier-1 GNSS reference station co-located with two calibration-grade corner reflectors (CRs). The latter are strategically positioned to account for both the ascending and descending tracks of SAR satellite missions, including the ESA's Sentinel-1. As of June 2021, CyCLOPS has reached full operational capacity and plays a crucial role in monitoring the geodynamic regime within the southeastern Mediterranean area. Additionally, it actively tracks landslides occurring in the western part of Cyprus. Although CyCLOPS primarily concentrates on geohazard monitoring, its infrastructure is also configured to facilitate the radiometric calibration and geometric validation of Synthetic Aperture Radar (SAR) imagery. Consequently, this study evaluates the performance of Sentinel-1A SAR by exploiting the CyCLOPS network to determine key parameters including spatial resolution, sidelobe levels, Radar Cross-Section (RCS), Signal-to-Clutter Ratio (SCR), phase stability, and localization accuracy, through Point Target Analysis (PTA). The findings reveal the effectiveness of the CyCLOPS infrastructure to maintain high-quality radiometric parameters in SAR imagery, with consistent spatial resolution, controlled sidelobe levels, and reliable RCS and SCR values that closely adhere to theoretical expectations. With over two years of operational data, these findings enhance the understanding of Sentinel-1 SAR product quality and affirm CyCLOPS infrastructure's reliability. [ABSTRACT FROM AUTHOR]

This article presents a methodology for evaluating the susceptibility of landfill areas to develop landslides by analyzing Synthetic Aperture Radar (SAR) satellite products. The deformation velocity of the landfills is computed through the Persistent Scatterer Method on SAR imagery. These data, combined with a deformation model based on the shallow water equations (SWE), form the foundation for a Monte Carlo experiment that extrapolates the current state of the landfill into the future. The results of this simulation are then employed to determine the probability of a landslide occurrence. In order to validate the methodology effectiveness, a case study is conducted on a landfill in Zaldibar, Spain, revealing its effectiveness in estimating the probability of landfill landslides. This innovative approach emerges as an asset in large landfill management, acting as a proactive tool for identifying high-risk sites and preventing potential landslides, ultimately safeguarding human life and the environment. By providing insights into landslide probabilities, this study enhances decision-making processes and facilitates the development of intervention strategies in the domain of landfill risk assessment and management. [ABSTRACT FROM AUTHOR]

Aircraft targets, as high-value subjects, are a focal point in Synthetic Aperture Radar (SAR) image interpretation. To tackle challenges like limited SAR aircraft datasets and shortcomings in existing detection algorithms (complexity, poor performance, weak generalization), we present the Feature Enhancement and Multi-Scales Fusion Network (FEMSFNet) for SAR aircraft detection. FEMSFNet employs diverse image augmentation and integrates optimized Squeeze-and-Excitation Networks (SE) with residual network (ResNet) in a SdE-Resblock structure for a lightweight yet accurate model. It introduces ssppf-CSP module, an improved pyramid pooling model, to prevent receptive field deviation in deep network training. Tailored for SAR aircraft detection, FEMSFNet optimizes loss functions, emphasizing both speed and accuracy. Evaluation on the SAR Aircraft Detection Dataset (SADD) demonstrates significant improvements compared to the contrasted algorithms: precision rate (92%), recall rate (96%), and F1 score (94%), with a maximum increase of 12.2% in precision, 12.9% in recall, and 13.3% in F1 score. [ABSTRACT FROM AUTHOR]

The internal waves in the South China Sea are highly correlated with the tidal currents in the Luzon Strait, which makes it possible to establish an internal wave prediction model based on internal wave kinematics. However, the kinematic model requires the input of the exact location and time of the initial internal wave for which the generation mechanism of internal waves in the northern South China Sea must be well understood. By analyzing the internal wave field in the northern South China Sea (SCS) simulated using the MIT General Circulation Model (MITgcm) and observations from satellite synthetic aperture radar (SAR) and mooring temperature–salinity–depth (TSD) chains, the source regions and propagation initiation times of internal waves are identified for three typical tidal phases, i.e., the diurnal-tide-dominated phase (DTP), transition tide phase (TTP), and semidiurnal-tide-dominated phase (STP). The generation procedures of Type A and Type B internal waves are discussed in detail with those data. The present study reveals that Type A and Type B waves are generated at the eastern and western ridges, respectively, and both commence their westward propagation at the peak of the eastward tidal flow. The dynamics of lee waves and the resonance effect with double ridges constitute the generation mechanisms of internal waves in the northern SCS. Combined with varying configurations of tidal conditions, topography, and stratification, the generation procedures of Type A and Type B waves in the DTP, TTP, and STP are elucidated with the generation mechanism in a unified and self-consistent way. In short, during DTP, weaker A waves alternate with weaker B waves each day; during TTP, strong A waves and strong B waves appear alternately every day; and there are two weak A waves per day during the STP. The generation mechanism can help in developing future empirical models for generating internal waves using tidal currents, topography, and stratification without requiring complex fluid dynamics calculations. [ABSTRACT FROM AUTHOR]

Positioning a Synthetic Aperture Radar (SAR) receiver at a significant distance from an illuminator in a Low Earth Orbit (LEO) enables wide-angle repeat-pass bistatic interferometry. It's crucial to define the positioning limits of the receiver with respect to the illuminator to ensure reasonable coherences, altitudes of ambiguity, and a suitable common wavenumber support. I extended the standard monostatic formula, which yields the change in the interferometric travel path due to the vertical baseline. In the wide-angle bistatic case, the range-azimuth coordinate system is no longer orthogonal and we must consider the full 2D vector nature of the LOS orthogonal components. The two vertical baselines and the horizontal baseline of the receiver are needed to parameterize the system. Their impact on the interferometric coherence is quantified and bistatic limits are seen to be more flexible than those in the monostatic case due to the combination of independent baselines. I estimated the coherence, and then extended the analysis to the wavenumber domain, to quantify the common spectral support due to the wavenumber shifts due to the three baselines. The analysis carried out geometrically allows for combining together the effects of the transmitter's and receiver's vertical baselines and thus representing the residual spectral fraction with two instead of three parameters. Finally, I examined the achievable spatial resolution of the position of the interferer obtainable from the delay of the arrival of the interference between the illuminator (supposed to be silent) and the receiver. [ABSTRACT FROM AUTHOR]

Inland water level and its dynamics are key components in the global water cycle and land surface hydrology, significantly influencing climate variability and water resource management. Satellite observations, in particular altimetry missions, provide inland water level time series for nearly three decades. Space-based remote sensing is regarded as a cost-effective technique that provides measurements of global coverage and homogeneous accuracy in contrast to in-situ sensors. The advent of Open-Loop Tracking Command (OLTC), and Synthetic Aperture Radar (SAR) mode strengthened the use of altimetry missions for inland water level monitoring. However, it is still very challenging to obtain accurate measurements of water level over narrow rivers and small lakes. This scoping systematic literature review summarizes and disseminates the research findings, highlights major results, and presents the limitations regarding inland water level monitoring from satellite observations between 2018 and 2022. Following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guideline and through a double screening process, 48 scientific publications were selected meeting the eligibility criteria. To summarize the achievements of the previous 5 years, we present fundamental statistical results of the publications, such as the annual number of publications, scientific journals, keywords, and study regions per continent and type of inland water body. Also, publications associated with specific satellite missions were analyzed. The findings show that Sentinel-3 is the dominant satellite mission, while the ICESat-2 laser altimetry mission has exhibited a high growth trend. Furthermore, publications including radar altimetry missions were charted based on the retracking algorithms, presenting the novel and improved methods of the last five years. Moreover, this review confirms that there is a lack of research on the collaboration of altimetry data with machine learning techniques. [ABSTRACT FROM AUTHOR]

The use of multiple synthetic aperture radar polarizations can improve biomass estimations compared to using a single polarization. In this study, we compared predictions of aboveground biomass change from ALOS-2 PALSAR-2 backscatter using linear regression based on (1) the cross-polarization channels, (2) the co- and cross-polarizations from fully polarimetric SAR, (3) Freeman–Durden polarimetric decomposition, and (4) the polarimetric radar vegetation index (RVI). Additionally, the impact of forest structure on the sensitivity of the polarimetric backscatter to AGB and AGB change was assessed. The biomass consisted of mainly coniferous trees at the hemi-boreal test site Remningstorp, located in southern Sweden. We found some improvements in the predictions when quad-polarized data (RMSE = 79.4 tons/ha) were used instead of solely cross-polarized data (RMSE = 84.9 tons/ha). However, when using Freeman–Durden decomposition, the prediction accuracy improved further (RMSE = 69.7 tons/ha), and the highest accuracy was obtained with the radar vegetation index (RMSE = 50.4 tons/ha). The corresponding R2 values ranged from 0.45 to 0.82. The bias was less than 1 t/ha for all models. An analysis of forest variables showed that the sensitivity to AGB was reduced for high values of basal-area-weighted mean height, basal area, and stem density when predicting absolute AGB, but the best change prediction model was sensitive to changes larger than the apparent saturation point for AGB state estimates. We conclude that by using fully polarimetric SAR images, forest biomass changes can be estimated more accurately compared to using single- or dual-polarization images. The results were improved the most (in terms of RMSE and R2) by using the Freeman–Durden decomposition model or the RVI, which captured especially the large changes better. [ABSTRACT FROM AUTHOR]

Synthetic aperture radar (SAR) is a powerful tool for detecting and imaging targets in enclosed environments, such as tunnels and underground garages. However, SAR performance is degraded by multipath effects, which occur when electromagnetic waves are reflected by obstacles, such as walls, and interfere with the direct signal. This results in the formation of multipath ghost images, which obscure the true target and reduce the image quality. To overcome this challenge, we propose a novel method based on multi-angle observation. This method exploits the fact that the position of ghost images changes depending on the angle of the radar, while the position of the true target remains stable. By collecting and processing multiple data sets from different angles, we can eliminate the ghost images and enhance the target image. In addition, we introduce a center vector distance algorithm to address the complexity and computational intensity of existing multipath suppression algorithms. This algorithm, which defines the primary direction of multi-angle vectors from stable scattering centers as the center vector, processes and synthesizes multiple data sets from multi-angle observations. It calculates the distance of pixel intensity sequences in the composite data image from the center vector. Pixels within a specified threshold are used for imaging, and the final result is obtained. Simulation experiments and real SAR data from underground garages confirm the effectiveness of this method in suppressing multipath ghost images. [ABSTRACT FROM AUTHOR]

Supervised machine learning algorithms usually require huge labeled data sets to produce sufficiently good results. For many applications, these data sets are still not available today, and the reasons for this can be manifold. As a solution, the missing training data can be generated by fast simulators. This procedure is well studied and allows filling possible gaps in the training data, which can further improve the results of a machine learning model. For this reason, this article deals with the development of a two-dimensional electromagnetic field simulator for modeling the response of a radar sensor in an imaging system based on the synthetic aperture radar principle. The creation of completely random scenes is essential to achieve data sets with large variance. Therefore, special emphasis is placed on the development of methods that allow creating random objects, which can then be assembled into an entire scene. In the context of this contribution, we focus on humanitarian demining with regard to improvised explosive devices using a ground-penetrating radar system. This is an area where the use of trained classifiers is of great importance, but in practice, there are little to no labeled datasets for the training process. The simulation results show good agreement with the measurement results obtained in a previous contribution, demonstrating the possibility of enhancing sparse training data sets with synthetic data. [ABSTRACT FROM AUTHOR]

Wildfires play a crucial role in the transformation of forest ecosystems and exert a significant influence on the global climate over geological timescales. Recent shifts in climate patterns and intensified human–forest interactions have led to an increase in the incidence of wildfires. These fires are characterized by their extensive coverage, higher frequency, and prolonged duration, rendering them increasingly destructive. To mitigate the impact of wildfires on climate change, ecosystems, and biodiversity, it is imperative to conduct systematic monitoring of wildfire progression and evaluate their environmental repercussions on a global scale. Satellite remote sensing is a powerful tool, offering precise and timely data on terrestrial changes, and has been extensively utilized for wildfire identification, tracking, and impact assessment at both local and regional levels. The Canada Centre for Mapping and Earth Observation, in collaboration with the Canadian Forest Service, has developed a comprehensive National Burned Area Composite (NBAC). This composite serves as a benchmark for curating a bi-temporal multi-source satellite image dataset for change detection, compiled from the archives of Sentinel-2, Sentinel-1, and ALOS-2 PALSAR-2. To our knowledge, this dataset is the inaugural large-scale, multi-source, and multi-frequency satellite image dataset with 20 m spatial resolution for wildfire mapping, monitoring, and evaluation. It harbors significant potential for enhancing wildfire management strategies, building upon the profound advancements in deep learning that have contributed to the field of remote sensing. Based on our curated dataset, which encompasses major wildfire events in Canada, we conducted a systematic evaluation of the capability of multi-source satellite earth observation data in identifying wildfire-burned areas using statistical analysis and deep learning. Our analysis compares the difference between burned and unburned areas using post-event observation solely or bi-temporal (pre- and post-event) observations across diverse land cover types. We demonstrate that optical satellite data yield higher separability than C-Band and L-Band Synthetic Aperture Radar (SAR), which exhibit considerable overlap in burned and unburned sample distribution, as evidenced by SAR-based boxplots. With U-Net, we further explore how different input channels influence the detection accuracy. Our findings reveal that deep neural networks enhance SAR's performance in mapping burned areas. Notably, C-Band SAR shows a higher dependency on pre-event data than L-Band SAR for effective detection. A comparative analysis of U-Net and its variants indicates that U-Net works best with single-sensor data, while the late fusion architecture marginally surpasses others in the fusion of optical and SAR data. Accuracy across sensors is highest in closed forests, with sequentially lower performance in open forests, shrubs, and grasslands. Future work will extend the data from both spatial and temporal dimensions to encompass varied vegetation types and climate zones, furthering our understanding of multi-source and multi-frequency satellite remote sensing capabilities in wildfire detection and monitoring. [ABSTRACT FROM AUTHOR]

Extreme climate events such as storms and severe droughts are becoming more frequent under the warming climate. In the tropics, excess rainfall carried by hurricanes causes massive flooding and threatens ecosystems and human society. We assessed recent major floodings on the tropical island of Puerto Rico after Hurricane Maria in 2017 and Hurricane Fiona in 2022, both of which cost billions of dollars damages to the island. We analyzed the Sentinel-1 synthetic aperture radar (SAR) images right after the hurricanes and detected surface inundation extent by applying a random forest classifier. We further explored hurricane rainfall patterns, flow accumulation, and other possible drivers of surface inundation at watershed scale and discussed the limitations. An independent validation dataset on flooding derived from high-resolution aerial images indicated a high classification accuracy with a Kappa statistic of 0.83. The total detected surface inundation amounted to 10,307 ha after Hurricane Maria and 7949 ha after Hurricane Fiona for areas with SAR images available. The inundation patterns are differentiated by the hurricane paths and associated rainfall patterns. We found that flow accumulation estimated from the interpolated Fiona rainfall highly correlated with the ground-observed stream discharges, with a Pearson's correlation coefficient of 0.98. The detected inundation extent was found to depend strongly on hurricane rainfall and topography in lowlands within watersheds. Normal climate, which connects to mean soil moisture, also contributed to the differentiated flooding extent among watersheds. The higher the accumulated Fiona rain and the lower the mean elevation in the flat lowlands, the larger the detected surface flooding extent at the watershed scale. Additionally, the drier the climate, which might indicate drier soils, the smaller the surface flooding areas. The approach used in this study is limited by the penetration capability of C-band SAR; further application of L-band images would expand the detection to flooding under dense vegetation. Detecting flooding by applying machine learning techniques to SAR satellite images provides an effective, efficient, and reliable approach to flood assessment in coastal regions on a large scale, hence helping to guide emergency responses and policy making and to mitigate flooding disasters. [ABSTRACT FROM AUTHOR]

Coasts are continually changing and remote sensing from satellites has the potential to both map and monitor coastal change at multiple scales. Unlike optical technology, synthetic aperture radar (SAR) is uninfluenced by darkness, clouds, and rain, potentially offering a higher revision period to map shoreline position and change, but this can only be feasible if we have a better interpretation of what shorelines as extracted from SAR imagery represent on the ground. This study aims to assess the application of shorelines extracted from SAR from publicly available satellite imagery to map and capture intra-annual to inter-annual shoreline variability. This is assessed in three tidally controlled coastal study areas that represent sand and gravel beaches with different backshore environments: low-lying dunes and marsh; steep, rocky cliff; and urban environments. We have found that SAR shorelines consistently corresponded to positions above the high-water mark across all three sites. We further discuss the influence of the scene geometry, meteorological and oceanographic conditions, and backshore environment and provide a conceptual interpretation of SAR-derived shorelines. In a low-lying coastal setting, the annual change rate derived through SAR presents a high degree of alignment with the known reference values. The present study contributes to our understanding of the poorly known aspect of using shorelines derived from publicly available SAR satellite missions. It outlines a quantitative approach to automatically assess their quality with a new automatic detection method that is transferable to shoreline evolution assessments worldwide. [ABSTRACT FROM AUTHOR]

Remote sensing technologies have been successfully used for deforestation monitoring, and with the wide availability of satellite products from different platforms, forest monitoring applications have grown in recent years. The observed potential in these technologies motivates the development of forest mapping and monitoring tools that could also be used for neighboring applications like agriculture or land-use mapping. A literature review confirmed the research areas of interest in deforestation monitoring using synthetic aperture radar (SAR) and data fusion techniques, which guided the formulation of the method developed in this article consisting of a data preprocessing workflow for SAR (Sentinel-1) and multispectral (Sentinel-2) data and a procedure for the selection of a machine learning model for forest/nonforest segmentation evaluated in different combinations of Sentinel-1 and Sentinel-2 bands. The selected model is a random forest algorithm that uses C-band SAR dual-polarimetric bands, intensity features, and vegetation indices derived from optical/multispectral data. The selected random forest classifier's balanced accuracies were 79–81%, and the f1-scores were 0.72–0.76 for the validation set. The results allow the obtention of yearly forest/nonforest and forest loss maps in the study area of Bajo Cauca in Colombia, a region with a documented high deforestation rate. [ABSTRACT FROM AUTHOR]