Search

Excessive copper (Cu2+) causes adverse effects on human health and the ecological environment. Traditional methods for detecting Cu2+ have drawbacks such as high detection costs, complex operating conditions, and being time consuming. Therefore, there is an urgent need to develop simple detection methods to better meet specific health and environment quality needs. In this work, a paper-based fluorescence sensor was prepared (herein referred to as the as-prepared method) by immersing filter paper in aqueous polyethyleneimine (PEI) solution, and its potential use in Cu2+ detection was investigated. The results showed that the as-prepared paper samples, with fluorescence properties obtained by aggregation-induced luminescence of PEI, have selective recognition of Cu2+ based on the internal filtration effect, and the lowest detection limit is 0.03 μM. In addition, the relative error of this method is in the range of 1.80~2.23%, which is relatively comparable to the national standard method (0.63~630 μM), demonstrating high accuracy. Therefore, paper-based sensors with a simple preparation method have potential applications in the detection of Cu2+ in water. [ABSTRACT FROM AUTHOR]

In this research work, a coated paper was prepared with poly (butylene adipate-co-terephthalate) (PBAT) film to explore its use in eco-friendly food packaging. The paper was coated with PBAT film for packaging using hot pressing, a production method currently employed in the packaging industry. The coated papers were evaluated for their structural, mechanical, thermal, and barrier properties. The structural morphology and chemical analysis of the coated paper confirmed the consistent formation of PBAT bi-layered on paper surfaces. Surface coating with PBAT film increased the water resistance of the paper samples, as demonstrated by tests of barrier characteristics, including the water vapor transmission rate (WVTR), oxygen transmission rate (OTR), and water contact angle (WCA) of water drops. The transmission rate of the clean paper was 2010.40 cc m−2 per 24 h for OTR and 110.24 g m−2 per 24 h for WVTR. If the PBAT-film was coated, the value decreased to 91.79 g m−2 per 24 h and 992.86 cc m−2 per 24 h. The hydrophobic nature of PBAT, confirmed by WCA measurements, contributed to the enhanced water resistance of PBAT-coated paper. This result presents an improved PBAT-coated paper material, eliminating the need for adhesives and allowing for the fabrication of bi-layered packaging. [ABSTRACT FROM AUTHOR]

At the beginning of the 20th century, the eclectic artist Mariano Fortuny y Madrazo patented two innovative methods for polychrome printing on fabrics and textiles, giving life to Fortuny fabric production in Venice. The first patent was related to colour application, while the second to a special machine that allows continuous printing using cylindrical rollers. Despite the descriptions, the methodology and materials used remain a secret. In collaboration with the Fortuny Museum in Venice, this research aimed at studying and identifying the different steps of Fortuny printing methodologies. Printing matrices, fabrics and raw materials found in the artist's studio were analysed in a multi-analytical campaign through digital microscopy, X-ray fluorescence (XRF), Fourier-transform infrared spectroscopy in attenuated total reflectance (FTIR-ATR), μ-Raman spectroscopy and gas chromatography–mass spectrometry (GC–MS). Three main pigments were identified in paper samples: ivory black, a copper-based pigment, and a carbon black pigment with ultramarine for blues. The pigments were bound with linseed oil and colophony in varying proportions. Polychrome silk fabrics were dyed with a base colour, and then the coloured patterns were superimposed by continuous printing. Prussian blue was identified as one of the textile inks. Results provided a better understanding of printing methodology. [ABSTRACT FROM AUTHOR]

Enhancing paper hydrophobicity is of key importance for many paper-based applications. Fatty acids or vegetable oils and their derivatives replace environmentally harmful conventional coating materials but still require challenging chemical reactions for covalent attachment onto paper. Here, we show that simple storage of olive oil-coated cotton linter paper at 70 °C and subsequent Soxhlet extraction is able to endow paper with hydrophobic properties, reaching water contact angles above 130°. In-depth chemical and morphological analytics show the relevance of temperature and air accessibility during the aging process compared with aging at ambient temperature and under the exclusion of oxygen, underlining the importance of assessing a coating's long-term performance and stability under diverse storage conditions. Simple storage of vegetable oil-coated paper at elevated temperatures followed by extraction proves to be an easy way to produce stable covalently attached hydrophobic paper coatings with exceptionally low coating amounts. [ABSTRACT FROM AUTHOR]

The forest products industries play a vital role in the economic, social, and environmental well-being of the Lake States in the United States. While various economic contribution analyses of forest products industries have been conducted to highlight the importance of such industries to regional economies, little effort has yet been made to parse out the contribution of activities in the value chain. The value chain is a series of steps involved in producing goods or services. This study used a matrix decomposition approach to estimate the economic contribution along the value chain through multiple pathways of four forest resource-based industries using wood as inputs: biomass power generation, sawmills, paper mills, and the construction of new single-family residential structures in the Lake States. The direct and indirect economic output values in 2017 resulting from the construction of new single-family residential structures were $19.1 billion, sawmills were $2.5 billion, paper mills were $17.6 billion, and the biomass power generation industry was $759 million. Of the direct and indirect economic output contributed by each industry, the highest percentage of output attributable to the logging industry was observed from the sawmills industry (12%), followed by biomass power generation (9%), paper mills (1.4%), and the construction of new single-family residential structures (<1%), respectively. The percentage of total economic output attributable to the stumpage industry in the region followed a similar trend as commercial logging for all value-chain industries. The relative economic contribution of the value-chain industries to the total economic contribution of the final industry varied based on whether the industry was a primary or secondary forest products industry and the pathways used for sourcing wood inputs. [ABSTRACT FROM AUTHOR]

This study explores the efficacy of 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide and 1-hexyl-3-methylimidazolium chloride as cleaning agents for aged cellulosic artifacts. A 10% v/v acetone solution of these ionic liquids (ILs) effectively removes the brownish-yellow color of aged paper in a 10 min immersion treatment. Colorimetric analysis shows a remarkable increase in lightness (L*) by up to 40% and a decrease in red/brownish tones (b*) after IL treatment. The cleaning process also deacidifies the paper, shifting the pH to neutral-slightly basic levels and enhancing its long-term stability. Optimal pH outcomes are achieved, with ionic liquid consumption values of 0.4–0.6 g/g of paper. The FTIR analysis revealed structural changes in cellulose induced by the washing step, which is mainly due to the reorganization effect imparted by the ionic liquids. Furthermore, ILs mobilized degraded compounds and acidic species, aiding in their extraction during the restoration process. Mechanical testing indicated an enhancement in the overall tensile strength and strain at break values for IL-treated papers by up to 33%. This study demonstrates the multiple benefits of alkylimidazolium ionic liquids for preserving and restoring cultural heritage artifacts made of cellulosic materials. [ABSTRACT FROM AUTHOR]

In recent years, due to environmental awareness regarding the harmfulness of polymeric materials, there has been a growing interest in using papers, especially those from alternative raw materials. The importance of using all available raw materials is imperative today. Raw materials that were once viewed as waste are now of great importance because they have the ability to replace raw materials that are used irrationally or are lacking. Cereal straw is a lignocellulosic material that could be used in the paper industry and in the production of increasingly prevalent paper packaging. The aim of this research was to analyze the relationships between the qualitative parameters of straw-based printed papers containing 30% agricultural residues (wheat, barley, or triticale). The influence of two qualitative parameters (ink penetration depth and optical ink density) on the print-through was observed using multiple regression analysis on straw-based papers produced at the laboratory level. Throughout the research, 100% recycled wood paper was used as a reference sample. The results of the regression analysis showed that none of the variables individually make a statistically significant contribution to the prediction of the dependent variable in a linear context, that is, they indicate a non-linear interaction between the variables and the specific conditions under which the dependent variable reaches local extremes and changes in the gradient. Considering the results of the regression analysis and the visualization of the relationship, the model was additionally tested with other independent variables (paper type). From the results obtained, it can be concluded that the alternative straw-based paper with 30% barley pulp has the best interaction between ink and paper, which is the most similar to the reference sample in terms of printability, while the alternative straw-based paper with 30% wheat generally differs significantly from the reference paper when all three prints are considered. [ABSTRACT FROM AUTHOR]