Search

Satellite data have been widely utilized for flood detection and mapping tasks, and in recent years, there has been a growing interest in using Synthetic Aperture Radar (SAR) data due to the increased availability of recent missions with enhanced temporal resolution. This capability, when combined with the inherent advantages of SAR technology over optical sensors, such as spatial resolution and independence from weather conditions, allows for timely and accurate information on flood event dynamics. In this study, we present an innovative automated approach, SAR-RST-FLOOD, for mapping flooded areas using SAR data. Based on a multi-temporal analysis of Sentinel 1 data, such an approach would allow for robust and automatic identification of flooded areas. To assess its reliability and accuracy, we analyzed five case studies in areas where floods caused significant damage. Performance metrics, such as overall (OA), user (UA), and producer (PA) accuracy, as well as the Kappa index (K), were used to evaluate the methodology by considering several reference flood maps. The results demonstrate a user accuracy exceeding 0.78 for each test map when compared to the observed flood data. Additionally, the overall accuracy values surpassed 0.96, and the kappa index values exceeded 0.78 when compared to the mapping processes from observed data or other reference datasets from the Copernicus Emergency Management System. Considering these results and the fact that the proposed approach has been implemented within the Google Earth Engine framework, its potential for global-scale applications is evident. [ABSTRACT FROM AUTHOR]

Landslides, resulting from disturbances in slope equilibrium, pose a significant threat to landscapes, infrastructure, and human life. Triggered by factors such as intense precipitation, seismic activities, or volcanic eruptions, these events can cause extensive damage and endanger nearby communities. A comprehensive understanding of landslide characteristics, including spatio-temporal patterns, dimensions, and morphology, is vital for effective landslide disaster management. Existing remote sensing approaches mostly use either optical or synthetic aperture radar sensors. Integrating information from both these types of sensors promises greater accuracy for identifying and locating landslides. This study proposes a novel approach, the ML-LaDeCORsat (Machine Learning-based coseismic Landslide Detection using Combined Optical and Radar Satellite Imagery), that integrates freely available Sentinel-1, Palsar-2, and Sentinel-2 imagery data in Google Earth Engine (GEE). The approach also integrates relevant spectral indices and suitable bands used in a machine learning-based classification of coseismic landslides. The approach includes a robust and reproducible training and validation strategy and allows one to choose between five classifiers (CART, Random Forest, GTB, SVM, and Naive Bayes). Using landslides from four different earthquake case studies, we demonstrate the superiority of our approach over existing solutions in coseismic landslide identification and localization, providing a GTB-based detection accuracy of 87–92%. ML-LaDeCORsat can be adapted to other landslide events (GEE script is provided). Transfer learning experiments proved that our model can be applied to other coseismic landslide events without the need for additional training data. Our novel approach therefore facilitates quick and reliable identification of coseismic landslides, highlighting its potential to contribute towards more effective disaster management. [ABSTRACT FROM AUTHOR]

Interferometric synthetic aperture radar (InSAR) processing techniques have been widely used to derive surface deformation or retrieve terrain elevation. Over the development of the past few decades, most research has mainly focused on its application, new techniques for improved accuracy, or the investigation of a particular error source and its correction method. Therefore, a thorough discussion about each error source and its influence on InSAR-derived products is rarely addressed. Additionally, InSAR is a challenging topic for beginners to learn due to the intricate mathematics and the necessary signal processing knowledge required to grasp the core concepts. This results in the fact that existing papers about InSAR are easy to understand for those with a technical background but difficult for those without. To cope with the two issues, this paper aims to provide an organized, comprehensive, and easily understandable review of the InSAR error budget. In order to assist readers of various backgrounds in comprehending the concepts, we describe the error sources in plain language, use the most fundamental math, offer clear examples, and exhibit numerical and visual comparisons. In this paper, InSAR-related errors are categorized as intrinsic height errors or location-induced errors. Intrinsic height errors are further divided into two subcategories (i.e., systematic and random error). These errors can result in an incorrect number of phase fringes and introduce unwanted phase noise into the output interferograms, respectively. Location-induced errors are the projection errors caused by the slant-ranging attribute of the SAR systems and include foreshortening, layover, and shadow effects. The main focus of this work is on systematic and random error, as well as their effects on InSAR-derived topographic and deformation products. Furthermore, because the effects of systematic and random errors are greatly dependent on radar wavelengths, different bands are utilized for comparison, including L-band, S-band, C-band, and X-band scenarios. As examples, we used the parameters of the upcoming NISAR operation to represent L-band and S-band, ERS-1 and Sentinel-1 to represent C-band, and TerraSAR-X to represent X-band. This paper seeks to bridge this knowledge gap by presenting an approachable exploration of InSAR error sources and their implications. This robust and accessible analysis of the InSAR error budget is especially pertinent as more SAR data products are made available (e.g., NISAR, ICEYE, Capella, Umbra, etc.) and the SAR user-base continues to expand. Finally, a commentary is offered to explore the error sources that were not included in this work, as well as to present our thoughts and conclusions. [ABSTRACT FROM AUTHOR]

SAR imagery plays a crucial role in geological and environmental monitoring, particularly in highland mountainous regions. However, inherent geometric distortions in SAR images often undermine the precision of remote sensing analyses. Accurately identifying and classifying these distortions is key to analyzing their origins and enhancing the quality and accuracy of monitoring efforts. While the layover and shadow map (LSM) approach is commonly utilized to identify distortions, it falls short in classifying subtle ones. This study introduces a novel LSM ground-range slope (LG) method, tailored for the refined identification of minor distortions to augment the LSM approach. We implemented the LG method on Sentinel-1 SAR imagery from the tri-junction area where the Xiaojiang, Pudu, and Jinsha rivers converge at the Yunnan-Sichuan border. By comparing effective monitoring-point densities, we evaluated and validated traditional methods—LSM, R-Index, and P-NG—against the LG method. The LG method demonstrates superior performance in discriminating subtle distortions within complex terrains through its secondary classification process, which allows for precise and comprehensive recognition of geometric distortions. Furthermore, our research examines the impact of varying slope parameters during the classification process on the accuracy of distortion identification. This study addresses significant gaps in recognizing geometric distortions and lays a foundation for more precise SAR imagery analysis in complex geographic settings. [ABSTRACT FROM AUTHOR]

The assessment of forest structural parameters is crucial for understanding carbon storage, habitat suitability, and timber stock. However, the labor-intensive and expensive nature of field measurements, coupled with inadequate sample sizes for large-scale modeling, poses challenges. To address the forest structure parameters in the Western Tianshan Mountains, this study used UAV-LiDAR to gather extensive sample data. This approach was enhanced by integrating Sentinel satellite and topographic data and using a Bayesian-Random Forest model to estimate forest canopy height, average height, density, and aboveground biomass (AGB). Validation against independent LiDAR-derived samples confirmed the model's high accuracy, with coefficients of determination (R2) and root mean square errors (RMSE) indicating strong predictive performance (R2 = 0.63, RMSE = 5.06 m for canopy height; R2 = 0.64, RMSE = 2.88 m for average height; R2 = 0.68, RMSE = 62.84 for density; and R2 = 0.59, RMSE = 29.71 Mg/ha for AGB). Notably, the crucial factors include DEM, Sentinel-1 (VH and VV backscatter in dB), and Sentinel-2 (B6, B8A, and B11 bands). These factors contribute significantly to the modeling of forest structure. This technology aims to expedite and economize forest surveys while augmenting the range of forest parameters, especially in remote and rugged terrains. Using a wealth of UAV-LiDAR data, this outcome surpasses its counterparts' by providing essential insights for exploring climate change effects on Central Asian forests, facilitating precise carbon stock quantification, and enhancing knowledge of forest ecosystems. [ABSTRACT FROM AUTHOR]

This paper presents a methodology to detect the coastal erosion and progradation effects in the 'Atrato River' delta, located in the Gulf of Urabá in Colombia, using SAR (Synthetic Aperture Radar) images. Erosion is the physical–mechanical loss of the soil that affects its functions and ecosystem services while producing a reduction in its productive capacity. Progradation is the deposition of layers in the basinward direction while moving coastward. Other studies have investigated these two phenomena using optical images, encountering difficulties due to the persistent presence of clouds in this region. In order to avoid the cloud effects, in this study, we used 16 Sentinel 1 SAR images with two different polarizations between 2016 and 2023. First, each image was rescaled from 0 to 255, then the image was despeckled by a deep learning (DL) model. Afterwards, a single RGB image was composed with the filtered polarizations. Next, a classifier with 99% accuracy based on Otsu's method was used to determine whether each pixel was water or not. Then, the classified image was registered to a reference one using Oriented FAST and Rotated BRIEF (ORB) descriptor. Finally, a multitemporal analysis was performed by comparing every image to the previous one to identify the studied phenomena, calculating areas. Also, all images were integrated to obtain a heatmap that showed the overall changes across eight years (2016–2023) in a single image. The multitemporal analysis performed found that the newly created mouth is the most active area for these processes, coinciding with other studies. In addition, a comparison of these findings with the Oceanic Niño Index (ONI) showed a relative delayed coupling to the erosion process and a coupling of progradation with dry and wet seasons. [ABSTRACT FROM AUTHOR]

Wideband interference (WBI) can significantly reduce the image quality and interpretation accuracy of synthetic aperture radar (SAR). To eliminate the negative effects of WBI on SAR, we propose a novel end-to-end data-driven approach to mitigate WBI. Specifically, the WBI is mitigated by an explicit function called WBI mitigation–generative adversarial network (WBIM-GAN), mapping from an input WBI-corrupted echo to its properly WBI-free echo. WBIM-GAN comprises a WBI mitigation network and a target echo discriminative network. The WBI mitigation network incorporates a deep residual network to enhance the performance of WBI mitigation while addressing the issue of gradient saturation in the deeper layers. Simultaneously, the class activation mapping technique fully demonstrates that the WBI mitigation network can localize the WBI region rather than the target echo. By utilizing the PatchGAN architecture, the target echo discriminative network can capture the local texture and statistical features of target echoes, thus improving the effectiveness of WBI mitigation. Before applying the WBIM-GAN, the short-time Fourier transform (STFT) converts SAR echoes into a time–frequency domain (TFD) to better characterize WBI features. Finally, by comparing different WBI mitigation methods applied to several real measured SAR data collected by the Sentinel-1 system, the efficiency and superiority of WBIM-GAN are proved sufficiently. [ABSTRACT FROM AUTHOR]

Synthetic Aperture Radar (SAR) images are widely utilized in the field of remote sensing. However, there is a limited body of literature specifically addressing the compression of SAR learning images. To address the escalating volume of SAR image data for storage and transmission, which necessitates more effective compression algorithms, this paper proposes a novel framework for compressing SAR images. Experimental validation is performed using a representative low-resolution Sentinel-1 dataset and the high-resolution QiLu-1 dataset. Initially, we introduce a novel two-stage transformation-based approach aimed at suppressing the low-frequency components of the input data, thereby achieving a high information entropy and minimizing quantization losses. Subsequently, a quality map guidance image compression algorithm is introduced, involving the fusion of the input SAR images with a target-aware map. This fusion involves convolutional transformations to generate a compact latent representation, effectively exploring redundancies between focused and non-focused areas. To assess the algorithm's performance, experiments are carried out on both the low-resolution Sentinel-1 dataset and the high-resolution QiLu-1 dataset. The results indicate that the low-frequency suppression algorithm significantly outperforms traditional processing algorithms by 3–8 dB when quantifying the input data, effectively preserving image features and improving image performance metrics. Furthermore, the quality map guidance image compression algorithm demonstrates a superior performance compared to the baseline model. [ABSTRACT FROM AUTHOR]

Long-distance water transfer is a critical engineering measure to rectify disparities in water resource distribution across regions. The effective operation and safety of such projects are paramount to their success, as localized issues can have cascading consequences, potentially disrupting the entire network. Conventional ground-based monitoring methods have limitations in measuring the deformation of large-scale structures. In this paper, InSAR is employed to monitor the deformation of the Shuangwangcheng (SWC) Reservoir, which features a long embankment dam as part of the South-to-North Water Diversion Project in China. We utilize data from both Sentinel-1 and TerraSAR-X satellites to derive 7-year deformation. Results reveal that the entire dam experiences continuous subsidence, with the maximum deformation in the line-of-sight direction measuring ~160 mm. While minor differential settlements are noted in different sections of the dam, the gradient is not significant due to the dam's substantial length. The InSAR deformation results from multiple geometries demonstrate good consistency, with the highest correlation observed between the Sentinel-1 ascending and descending datasets, exceeding 0.9. Validation against the GNSS observations of the three sites on the SWC Dam shows the accuracy of InSAR displacements is ~8 mm. Water level changes do impact deformation, but consolidation settlement appears to be the primary controlling factor during the monitoring period. This study underscores the potential of InSAR in long-distance water transfer projects and highlights that spatially continuous deformation is the most significant advantage. [ABSTRACT FROM AUTHOR]

Forest aboveground biomass (AGB) is integral to the global carbon cycle and climate change study. Local and regional AGB mapping is crucial for understanding global carbon stock dynamics. NASA's global ecosystem dynamics investigation (GEDI) and combination of multi-source optical and synthetic aperture radar (SAR) datasets have great potential for local and regional AGB estimation and mapping. In this study, GEDI L4A AGB data and ground sample plots worked as true AGB values to explore their difference for estimating forest AGB using Sentinel-1 (S1), Sentinel-2 (S2), and ALOS PALSAR-2 (PALSAR) data, individually and in their different combinations. The effects of forest types and different true AGB values for validation were investigated in this study, as well. The combination of S1 and S2 performed best in forest AGB estimation with R2 ranging from 0.79 to 0.84 and RMSE ranging from 7.97 to 29.42 Mg/ha, with the ground sample plots used as ground truth data. While for GEDI L4A AGB product working as reference, R2 values range from 0.36 to 0.47 and RMSE values range from 31.41 to 37.50 Mg/ha. The difference between using GEDI L4A and ground sample plot as reference shows obvious dependence on forest types. In summary, optical dataset and its combination with SAR performed better in forest AGB estimation when the average AGB is less than 150 Mg/ha. The AGB predictions from GEDI L4A AGB product used as reference underperformed across the different forest types and study sites. However, GEDI can work as ground truth data source for forest AGB estimation in a certain level of estimation accuracy. [ABSTRACT FROM AUTHOR]

Global food security and nutrition is suffering from unprecedented challenges. To reach a world without hunger and malnutrition by implementing precision agriculture, satellite remote sensing plays an increasingly important role in field crop monitoring and management. Alfalfa, a global widely distributed forage crop, requires more attention to predict its yield and quality traits from satellite data since it supports the livestock industry. Meanwhile, there are some key issues that remain unknown regarding alfalfa remote sensing from optical and synthetic aperture radar (SAR) data. Using Sentinel-1 and Sentinel-2 satellite data, this study developed, compared, and further integrated new optical- and SAR-based satellite models for improving alfalfa yield and quality traits prediction, i.e., crude protein (CP), acid detergent fiber (ADF), neutral detergent fiber (NDF), and neutral detergent fiber digestibility (NDFD). Meanwhile, to better understand the physical mechanism of alfalfa optical remote sensing, a unified hybrid leaf area index (LAI) retrieval scheme was developed by coupling the PROSAIL radiative transfer model, spectral response function of the desired optical satellite, and a random forest (RF) model, denoted as a scalable optical satellite-based LAI retrieval framework. Compared to optical vegetation indices (VIs) that only capture canopy information, the results indicate that LAI had the highest correlation (r = 0.701) with alfalfa yield due to its capacity in delivering the vegetation structure characteristics. For alfalfa quality traits, optical chlorophyll VIs presented higher correlations than LAI. On the other hand, LAI did not provide a significant additional contribution for predicting alfalfa parameters in the RF developed optical prediction model using VIs as inputs. In addition, the optical-based model outperformed the SAR-based model for predicting alfalfa yield, CP, and NDFD, while the SAR-based model showed better performance for predicting ADF and NDF. The integration of optical and SAR data contributed to higher accuracy than either optical or SAR data separately. Compared to a traditional embedded integration approach, the combination of multisource heterogeneous optical and SAR satellites was optimized by multiple linear regression (yield: R2 = 0.846 and RMSE = 0.0354 kg/m2; CP: R2 = 0.636 and RMSE = 1.57%; ADF: R2 = 0.559 and RMSE = 1.926%; NDF: R2 = 0.58 and RMSE = 2.097%; NDFD: R2 = 0.679 and RMSE = 2.426%). Overall, this study provides new insights into forage crop yield prediction for large-scale fields using multisource heterogeneous satellites. [ABSTRACT FROM AUTHOR]