Search

We proposed a triple functional SERS substrate by immobilized Ag nanoparticles on the surface of filter paper. The high dense Ag nanoparticles were distributed on the SERS substrate via in-situ growth process. By optimizing the parameter in preparation process, the optimal filter paper SERS substrate was fabricated by using 30 mM of AgNO 3 with 20 S growth time. Due to capillary-effect wicking of cellulose fiber, the paper SERS substrate provide simple, fast and pump-free function for transferring analyte onto sharp tip through development of fluid. The fluid flow also brings target concentrate effect within the tip area. Furthermore, the separation feasibility was obtained during the development process of fluid. The preconcentrated effects not only enhanced the SERS signal of analyte, but also improve the fluorescence visible effect. The filter paper SERS substrate was successfully used for separating, concentrating and detecting Sudan dye from chili product, the detection limit could achieve 10 -6 M. This study developed a portable, cost-effective and eco-friendly SERS substrate for separating and detecting trace chemical in food., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Thermal printing technology requires a color developer to activate the dye under the action of heat. Bisphenol A (BPA) has traditionally been used for this purpose, although it has increasingly been replaced by bisphenol S (BPS) in recent years. Due to concerns regarding their toxicity, the Swiss authorities have banned both BPA and BPS from thermal papers since 2020. The impact of this regulatory decision was evaluated during 3 monitoring campaigns: in 2013-2014, 2019 and 2021. They were used to describe the starting point, the transition phase, and the status after entry into force of the ban, respectively. Whereas the use of BPA as color developer dropped from 82.2% in 2013/14 to 10.8% in 2021, the fraction of BPS-based thermal paper rose from 3.1% to 19.1% during the same period, despite being banned. However, Pergafast® 201 (PF201) is now the main color developer in thermal paper in Switzerland, with an occurrence of 60.3%. Other alternatives such as D-8, TGSA, PPSMU, NKK-1304, BPS-MAE, D-90 and Blue4est® have only been marginally detected. This study demonstrates the efficiency of the regulatory measure and the feasibility to substitute BPA in thermal papers with less-toxic alternatives., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Reliable data on U.S. paper and cardboard waste by location and type are critical for developing waste-reduction solutions, but detailed geographic analysis is lacking in the literature. In this study, we employ statistical and geospatial methods to assess paper and cardboard waste in the United States by type at the national, state, county, and local levels. Of the estimated 110 million tons of paper and cardboard waste managed domestically in 2019, approximately 56% was landfilled, 6% was combusted, and 38% was recycled. The estimated market value of paper and cardboard lost to landfilling in 2019 was $4 billion, and the estimated losses of embodied energy and combustion energy were equivalent to 9% and 4% of U.S. primary industrial energy consumption, respectively. Associated landfilling fees amounted to almost $4 billion. This study aims to inform efforts to implement beneficial waste-management strategies by policy makers, researchers, businesses, and communities across the United States and to provide a model for similar studies in other parts of the world.

Introduction: Monitoring the atypical antipsychotic drug clozapine is crucial to ensure patient safety. This article showcases a high-throughput analytical method for measuring clozapine and its primary metabolite norclozapine (N-desmethylclozapine) in serum using paper spray mass spectrometry (PS-MS). Objectives: This study aimed to assess the viability of a PS-MS method for the rapid measurement of clozapine and norclozapine in human serum samples as an alternative to liquid chromatography mass spectrometry (LC-MS). Methods: Serum samples were processed by protein precipitation followed by deposition of the supernatant containing labelled internal standards onto paper spray substrates mounted in cartridges. Analytes were then analyzed using a triple quadrupole mass spectrometer equipped with a commercial paper spray ionization source. The results obtained from the patient samples were compared to those from a validated LC-MS assay. Results: PS-MS calibrations for clozapine and norclozapine were linear (R2 > 0.99) over five days. Between-run precision was below 8 %, and within-run precision did not exceed 10 %. When compared to a validated LC-MS method, the mean bias for 39 patient samples was −9% for clozapine and −1% for norclozapine, with no outliers. Mass spectrometry ion ratio comparisons indicated no interference for patient samples above the lower limit of quantification. There was less than 7 % change in the measured concentrations of both analytes over five days for samples dried on paper substrates. Notably, virtually no maintenance of the MS source was required during this study. Conclusion: This study illustrates the potential of PS-MS for serum drug monitoring in the clinical laboratory.

To improve the surface properties of low-density wood, poplar wood was functionalized by laminating Al2O3 impregnated paper onto poplar wood (Populus tomentosa Carr.) via unilateral surface compression. Bonding strength between Al2O3 impregnated paper and wood reached up to 3.08 MPa, meeting commercial grade I requirements for impregnated paper laminated wood flooring. A cross-linked structure between Al2O3 impregnated paper and wood was formed without visible cracks or other defects. Density of the functionalized wood surface increased remarkably and the surface hardness was significantly improved, surpassing that of hardwoods for wood flooring. The functionalized wood surface also exhibited high wear resistance, which reached to the specification for commercial grade I impregnated paper laminated wood flooring. Additionally, the water resistance of the functionalized wood surface was significantly improved through lamination with Al2O3 impregnated paper. The functionalized wood demonstrated high applicability for wood flooring.

Degradation of insulation paper is a key contributor to the failure of power transformers. Insulation degradation accelerates at elevated temperatures, which highlights the potential for better thermal management to prolong life. While several studies have analyzed the benefits of high thermal conductivity oil for reducing temperatures inside a transformer, this study is an initial assessment of the benefits of high thermal conductivity paper on transformer life. Blending particulates with cellulosic fibers offers a pathway for high thermal conductivity paper (with good dielectric properties), which can reduce internal temperatures. Presently, life extensions that can be achieved by the use of such thermally conducting papers were estimated, with the thermal conductivity of the paper being the key parameter under study. The analytical-numerical thermal model used in this study was validated against experimental measurements in a distribution transformer, adding confidence to the utility of the model. This model was then used to provide estimates of hot-spot temperature reduction resulting from the use of papers with higher thermal conductivity than baseline. Transformer life was predicted conventionally by tracking the degree of polymerization of paper over time, based on an Arrhenius model. Results indicate that increasing the thermal conductivity of paper from 0.2 W/mK (baseline) to 1 W/mK reduces the hot spot temperature by 10 °C. While degradation significantly depends on the moisture and oxygen content, the model shows that such a temperature reduction can increase life for all conditions, by as much as a factor of three.

Chemical wastes, such as synthetic dyes and coloring agents, pose significant concerns due to their detrimental impact on human health and ecosystems. As an eco-friendly alternative, the study of natural dyes and coloring agents has gained momentum over the last decade, owing to their biodegradability and reduced environmental and health risks. Here, we report a novel approach employing a butterfly pea anthocyanin paper-based sensor to quantify Fe(III) ions in water. Compared to previous green sensing techniques reliant on heavy instrumentations, this approach offers enhanced accessibility, cost-effectiveness, and user-friendliness. Notably, this study is the first example of natural dye sensing on a capillary microfluidics system. The capillary-driven microfluidic system ensures user-friendly operation and allows the sensing platform to be directly immersed in water without reagent loss. The device's design involves drying the butterfly pea-derived anthocyanin reagent within a pH-controlled paper substrate embedded in the capillary-driven microfluidic system. Smartphone-based colorimetric signal generation and quantification was achieved within seconds for a working range of 50–800 mg/L, with the device's detection limit of 43 mg/L using ImageJ and 55 mg/L using the smartphone app. This green sensing methodology has the potential to be used for groundwater sources with elevated Fe(III) levels. Additionally, this platform can be used in chemistry educational settings as an effective means to understand fundamental concepts such as acid-base reactions, base strength, ionic equilibrium, and metal complexation in a user-friendly microfluidic system.

This research provides an in-depth assessment of two paper yarn variants, examining their structural, functional, and performance characteristics. These yarns demonstrated favorable properties, including suitable linear density, twist, typical cellulosic functional groups as confirmed by Infrared spectroscopy, minimal hairiness, moisture transfer, and creditable mechanical strength. These yarns have flat layered cross-sections and grooved longitudinal surfaces. In addition, a low hairiness index (1.3–1.33) further acknowledged their smooth surface. Their remarkable evenness (15.86% and 7.08%) supported their effective wicking properties. Despite average breaking strength (0.77 cN/dTex and 1.05 cN/dTex) and moderate elongation, these yarns exhibited exceptional water-washing resistance and retained over 89% breaking strength after 15 washes. This study ranks these paper yarns as highly suitable for durable clothing fabrics, providing promising sustainable alternatives in the textile industry.

Carbon fiber paper is one of the most important substrates used in the gas diffusion layer of the polymer electrolyte membrane fuel cell. A novel approach to creating carbon fiber paper using polyacrylonitrile compounds was proposed in this study. The technique incorporated varying amounts of carbon materials, including carbon black (Vulcan), graphite powder, and carbon nanotubes. Polyacrylonitrile carbon materials were prepared through the spinning process, followed by oxidative stabilization under an oxygen atmosphere at a temperature range of 160–300 °C as the first step. The pliable material undergoes a conversion process to create a compound or ladder that is non-plastic, which is then stabilized in an N2 atmosphere. The fibers are then pre-carbonized at temperatures ranging from 300 to 600 °C and further carbonized between 600 and 1100 °C. After that, Teflon is added and the resulting fibers are made into sheets during the production process. Finally, physical measurements and electrochemical methods such as: checking the amount of water absorption, scanning electron microscope (SEM), chronopotentiometry, electrochemical impedance spectroscopy, electron resistance of carbon sheet, double layer capacitance, and surface roughness parameter were evaluated. The results indicate that the best performance is related to CP7 carbon paper (with a 30–70 % combination of polyacrylonitrile and carbon black).

The contamination characteristics, migration patterns and health risks of per- and polyfluoroalkyl substances (PFAS) were investigated in 66 Chinese paper products by using target and non-target screening methods. Among 57 target PFASs, 5 and 6 PFASs were found in the hygiene paper products (

We present a facile one-step hydrothermal method for the fabrication of free-standing graphene paper using aqueous graphene oxide (GO) dispersion as the starting material. Notably, the method does not require the use of any additives for the reduction and preparation of the graphene paper. The resulting graphene paper exhibits a high degree of reduction, as confirmed by X-ray photoelectron spectroscopy (XPS) analysis, revealing a carbon-to-oxygen (C/O) ratio of ∼7. The fabricated graphene paper also demonstrates excellent conductivity, with a measured value of ∼1900 S/m, and sheet resistance of around 100 Ω/sq. Furthermore, the energy storage capability of the graphene paper based electrode is evaluated, which shows a promising specific capacity of 249 F/g at a current density of 1 A/g in 1M H2SO4 as the ionic medium. Additionally, the electrode has also demonstrated remarkable energy density and power density values of 28.68 Wh/Kg and 455 W/Kg, respectively. Overall, the resulting graphene paper exhibits high conductivity and excellent electrochemical performance, making it a promising candidate for various energy storage applications.

A ratiometric fluorescence sensor platform with easy-to-use and accurate is nanoengineered for NH3 quantitative detection and visual real-time monitoring of chicken freshness using smartphones. The ratiometric fluorescent probe formed by combining the zinc ion complex and carbon dots has a double-emitted fluorescence peak. The fluorescence intensity of the complex changed can be clearly observed with the increase of the concentration of ammonia solution under 365 nm wavelength excitation. In order to detect NH3 concentration in gaseous phase, a portable paper-based sensor was designed. The sensor had a good linear relationship with NH3 concentration ranging from 10.0 to 90.0 μmol/L and the LOD value was 288 nM. This fluorescent paper-based sensor was used to check the freshness of chicken breast refrigerated at 4 °C, revealed observable shifts from blue to green. The fluorescent paper-based sensor can detect NH3 concentration in real time and simplify the monitoring process of meat freshness while ensuring accuracy and stability.

Bamboo, a member of the grass family, is a fast growing and high yielding renewable resource. The popularity of bamboo has risen in recent times owing to its multifaceted and myriad of practical applications. There are unlimited uses of bamboo, therefore proper utilization of this beneficial resource will be useful to the industrial sector. This review provides a comprehensive summary regarding the potential of bamboo as a vital non-wood fibrous raw material for pulp, paper and other allied industries owing to its ability to conserve forests and foster sustainable economic development. Bamboo's abundance, renewability, mechanical strength, and other functional features make it an appealing and potential building biomaterial in the pursuit of sustainable raw materials needed for industrial development. This review provides an in-depth summary and unique perspective on the application of bamboo at a commercial scale in various sectors, thereby encouraging the utilization of this potential material towards environmental sustainability and economic growth.

Metalloid nanoparticles (MNPs) possess unique physicochemical properties but are challenging to create through biological or chemical routes. Using Pulsed Laser Ablation in Liquid (PLAL), Mg–C MNPs are fabricated from powders. The produced nanocolloids were ablated after the target was removed to tailor the particle size. MNPs with a mean size 300 nm could be reduced to 60 nm. Alternatively, MNPs with a mean size of 60 nm could be increased to 90 nm. The increase/decrease in size is controlled by the laser processing parameters and showcases the ability of PLAL for real-world applications that require meticulous control of size. The as-fabricated nanocolloids were successfully inkjet printed on paper, achieving a low resistivity of 75 Ω/square after 60 prints, highlighting their potential in printed electronics. To address a historical research gap, this article explored the impact of PLAL processing parameters, including fluence (1–2 J/cm2), pulse width (0.2–0.9 ns), repetition rate (10–20 kHz), and pH, factors often overlooked which is partly limiting applications. The influence of powder vs rod target on the PLAL process was addressed revealing that powders produce better size control and are easier to handle but they produce lower colloid concentrations.

Foodborne spores are ubiquitous with extremely strong resistance, and pose a serious threat to food safety and human health. Therefore, rapid, sensitive, and selective detection of spores are crucial. In this study, a fluorescent probe was developed based on lanthanide ion (Eu3+)-labeled nano-silver-modified graphene oxide (GO-AgNPs-Eu3+) for the detection of 2,6-dipicolinic acid (DPA), a biomarker unique to spores, to allow quantitative spores detection. The GO-AgNPs-Eu3+ nano-fluorescent probe was loaded onto a polyvinylidene fluoride microfiltration membrane, and a smartphone-assisted portable GO-AgNPs-Eu3+ nanoparticles-based paper visual sensor was designed for rapid on-site quantitative and real-time online detection of spores. The results indicated that the developed probe achieved equilibrium binding with DPA within 5 min, and enhanced fluorescence emission through antenna effect. The fluorescence detection presented a good linear relationship in the DPA concentration range of 0–45 μM, with a DPA detection limit of 4.62 nM and spore detection limit of 104 cfu/mL. The developed sensor showed a change in fluorescence from blue to red with increasing DPA concentration, and this color change was quantitatively detected through smartphone RGB variations, with a detection limit of 13.1 μM for DPA and 6.3 cfu/mL for Bacillus subtilis spores. Subsequently, the sensitivity and selectivity of the developed sensor were verified using actual milk and water samples spiked with B. subtilis spores. The results of this study provided objective technological support for rapid detection of spores, which is important for reducing the occurrence of foodborne diseases and improving food safety.

The manuscript describes a technique for fabrication and validation of a standalone handheld optical biosensor designed for non-invasive monitoring of glucose through saliva. In this cost-effective process, a 3D-printed glucose test strip was filled with sieving paste comprising of cellulose, polyethylene glycol (PEG), polyvinyl alcohol (PVA) and glycerol, onto which, glucose oxidase-peroxidase (GOD-POD) enzymes and 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) chromogenic dye were co-immobilized. The enzymatic reaction produced H2O2 as by-product with which the ABTS reacted, leading to colour change on the detection zone of the strip which was detected by the developed glucometer. The in-house developed meter included an optically isolated section in its structure for inserting the strip to prevent interference from the ambient light conditions. The biosensor exhibited a broad detection range of 28–204 mg/dL of glucose concentration, with a sensitivity of 26.89 count/mg/dL and a limit of detection (LOD) at 28 mg/dL, within a response time of 120 s. The device along with strips was validated with clinical samples, comparing salivary glucose levels (SGL) to blood glucose levels (BGL) using a commercial glucometer i.e., Accu-Chek Active. Student's t-test on clinical data yielded p-values of 0.018, 0.01, 0.008, and 0.003 in fasting and post-prandial samples of non-diabetic and diabetic patients respectively, which represents a significant correlation. The device also passed Clarke's error grid analysis and is hence considered medically acceptable. The low-cost and simple-to-use saliva-based glucometer should be ideally suited for mass screening of diabetes as well as day-to-day health check-ups in a non-invasive and painless manner.

There is a growing need for easy-to-use, low cost and portable quantitative assays to determine active pharmaceutical ingredients in the pharmaceutical industry. Here, we developed a batch spectrophotometric method and a method employing a paper-based microfluidic device for the estimation of Amoxicillin (AMX) in pure solution and pharmaceutical preparations. The detection depends on the coupling reaction of Amoxicillin with diazotized sulfadimidine (DSDM) in an alkaline medium. The yellow azo dye reaction product was measured at λmax 425 nm and linearity was observed from 2 to 30 mg L−1 with a detection limit of 0.32 mg L−1 and a quantification limit of 1.2 mg L−1 was found. The reaction was then transferred onto the paper-based microfluidic device and a plateau change in color intensity was found above 10 mg L−1. Thus, the paper-based microfluidic device can be applied for the semi-quantitative determination of Amoxicillin in pure solution and commercial pharmaceutical products for rapid screening.

The dimensional stability of paper during printing is crucial for ensuring production quality and runnability. However, inkjet printing faces inherent challenges due to the hygroscopic nature of paper and the use of water-based inks. Despite freshly printed sheets are flat, a considerable development of paper curl is often observed during storage. In this study, we establish the link between the migration of ink co-solvents and the long-term curl development of printed paper. A4 paper sheets were sprayed with a water-glycerol model ink and changes in the sheet's curvature were monitored using a 2D-laser sensor. We also investigated glycerol migration by splitting the sheets into layers and determining the glycerol distribution using high-performance liquid chromatography. Our results demonstrate the development of curl during storage as well as glycerol migration in thickness direction of the sheet, both on a comparable timescale. We thus propose that long term curl in inkjet printing can be caused by z-directional migration of the co-solvent (glycerol) over time. This study enhances understanding of the physical mechanisms that drive the long-term curl phenomenon in inkjet-printed sheets. The results can be used to optimize printing processes, allowing for the production of higher quality printed products with greater dimensional stability.

The present study describes the creation of a 3D printed cassette named “3DP-PAC”, integrated to an electrochemical-aptasensor for the detection of dengue virus. It consists of an electrode cassette printed from a PLA non-conductive filament that provides a sophisticated design & support system to the delicate conductive paper-electrode. Chemically synthesized GO/ZnO-NC was used, which increases the sensor's sensitivity by accelerating the flow of electrons transferring. DENV DNA-Aptamer specifically binds to its target antigen of DENV, confirming its selectivity and demonstrating no cross reactivity with chikungunya virus antigen (CHIKV–Ag). The current study developed a 3D-based aptasensor for detecting dengue virus at a low level of detection (0.1 μg/ml). In human serum, the established platform performed well. This study paves the way for the manufacture of next-generation electrochemical biosensors utilizing 3D printing technology, with possible consequences for healthcare applications on the edge of commercialization.

The objective of this work is to produce an ecologically friendly material for use in Ivory Coast's construction sector in the future. These materials should have good thermal qualities and be flame resistant in addition to helping to achieve interior comfort. The fundamental components under consideration are freely accessible in Ivory Coast and include clay mortar as a fire retardant, potato starch as a binder, and recycled paper granules as a filler. The suggested ecologically friendly material's manufacturing process is fully described in detail. After conditioning, the team created multiple samples, taking into account that each test that the materials are put through requires various probe sizes for the thermal conductivity test, the reaction to fire test, and the flexural strength test. The best result regarding thermal conductivity of composites was obtained when 10 % clay is added in the mixture, namely between 0.057 … 0.068 W/(mK). During the ignitability tests the flame did not propagate to a height greater than 15 cm throughout the 60 s test time, so it can be concluded that the materials match minimally in the class E of reaction to fire. The flexural strength of tested materials was under 0.8 MPa.

Screen-printed copper electrodes have the potential to replace silver and lithium electrodes in printed batteries and sensors owing to the abundance of copper, its competitive electrical properties, and the low cost of raw materials. Herein, copper microparticle-glycerol-based inks were screen-printed onto paper to develop highly conductive electrodes. The conductivity and particle connectivity enhancement of screen-printed electrodes are the main research topics. These parameters translate to usability including increased sensitivity for sensor applications and reduced resistivity for battery electrode applications. CuO nanoparticles of 50 nm were deposited onto the electrodes at a concentration of 1 μl/cm2, which led to a 4-fold decrease in sheet resistivity from 200 to 50 Ω/m2. The increased connectivity and formation of new channels due to the addition of nanoparticles were visualised via field emission scanning electron microscopy. The CuO nanoparticles were developed via a hybrid approach incorporating wet chemistry for high yield and laser ablation for colloidal conductivity and Zeta potential enhancement which reached up to −45 mV. An optimal screen-printing viscosity of 62 mPa s was achieved through a precise 1.95:1 mass ratio of Cu microparticles to glycerol. Heat treatment at 100 °C after screen-printing enhanced particle connectivity by reducing glycerol content in the ink.

The selective detection of halides in aqueous samples is crucial for addressing environmental and physiological concerns. Consequently, the development of an affordable, portable, and user-friendly sensing platform for rapid halide detection holds substantial promise. In this study, we present a novel paper-based nanosensor as an appealing alternative for selectively detecting halides in water. This nanosensor leverages the optical properties of silver nanoparticles (ranging from 50 to 250 nm) embedded in epoxy resin and printed on filter paper. We elucidate the colorimetric behavior of this nanosensor in response to specific halides (chloride, bromide, and iodide) upon contact. Importantly, this sensor discerns, through a single measurement, the presence of these halides in aqueous media with remarkable selectivity. The nanosensor manifests distinct color changes in reaction to different halides, particularly at elevated concentrations (ranging from 2 to 400 mM), surpassing the saturation levels observed in other proposed sensors. These discernible color changes are due to the oxidation of silver nanoparticles, changing their morphology and aggregation density, and can be readily detected and analyzed directly from a captured image. Consequently, it demonstrates considerable potential for integration into automated qualitative monitoring devices based on chromaticity analysis.

This position paper elaborates on the significance and implications of the world's soil systems as climate regulators in their still unexploited potential to fight climate change and in the aspiration of modern society aiming at sustainable use of resources and safeguarding of life on the planet.The paper stresses the importance of Soil Management and Land Conservation as essential tools for the longevity of civilizations.Under the current climate change, there is a close relationship between climate factors and soil performance, but soil influences climate parameters, making it an important climate regulator.The text calls for a vision that recognizes soil as a natural system with socio-economic benefits and ecological functions and mentions the European Green Deal and United Nations Sustainable Development Goals as initiatives addressing soil and land issues.The text emphasizes the need for a profound and intelligent radical change in environmental, social, and economic approaches to address climate change. It highlights the responsibility of the current generation to make the right choices for the planet and future generations.

Antimicrobial properties of biochar have been attributed to its ability to inactivate foodborne pathogens in soil, to varying degrees. High concentrations of biochar have reduced E. coli O157:H7 in soil and dairy manure compost, based on alkaline pH. Preliminary studies evaluating 31 different biochars determined that two slow pyrolysis biochars (paper biochar and walnut hull cyclone biochar) were the most effective at inactivating E. coli in soil. A study was conducted to determine the lowest percentages of paper and walnut hull cyclone biochars needed to reduce E. coli O157:H7 in soil. A model soil was adjusted to 17.75% moisture, and the two types of biochar were added at concentrations of 1.0, 1.5, 2.0, 2.5, 3.5, 4.5, 5.5, and 6.5%. Nontoxigenic E. coli O157:H7 were inoculated into soil at 6.84 log CFU/g and stored for up to 6 weeks at 21°C. Mean E. coli O157:H7 counts were 6.01–6.86 log CFU/g at all weeks between 1 and 6 in soil-only positive control samples. Populations in all soil amended with 1.0 and 1.5% of either type of biochar (as well as 2.0% of the walnut hull biochar) resulted in ≤0.68 log reductions at week 6, when compared with positive controls. All other concentrations (i.e., ≥2.0% paper and ≥2.5% walnut hull) inactivated ≥2.7 log at all weeks between 1 and 6 (p

Objective: Thoracic outlet syndrome (TOS) is a rare disorder mostly seen in younger individuals. Although patient wellbeing is relevantly impaired, it often takes a long time before the diagnosis is made. Digital subtraction angiography (DSA) is routinely used despite its radiation exposure, which is a major concern in this young patient population. Moreover, DSA offers limited opportunities for functional assessment. By contrast, ultrasonography is widely accessible without causing radiation exposure and allows for flexible functional assessment. The main goal of the study was to investigate whether ultrasound (US) was a viable alternative to DSA in diagnosing arterial TOS (aTOS). Methods: Patients, referred to a tertiary centre for evaluation of suspected TOS, were recruited into the study. DSA was routinely performed with the patient's arms both in the raised (abducted) and neutral (adducted) position. Two vascular surgeons and two radiologists assessed the resulting images for the presence of aTOS. Additionally, two examiners performed US according to a standardised protocol. The reference for presence of aTOS was the DSA based interdisciplinary vascular conference consensus. Inter-rater agreement and latent class analysis (LCA) were performed between assessors and diagnostic methods. Results: Fifty one consecutive patients (two thirds female) aged 39.3 ± 13.0 years were included within 11 months. US agreement was excellent at 0.94 (0.841–0.980), DSA agreement for vascular surgeons was good at 0.779 (0.479–1.000), whereas it was moderate at 0.546 (0.046–1.000) for radiologists. Results suggest that DSA is untenable as the gold standard for aTOS diagnosis. In LCA, US was shown to be a reliable diagnostic tool for the detection of aTOS. Conclusion: US examination is a valid test for the detection of haemodynamically relevant compression of arteries in the diagnostic work up of aTOS using a standardised protocol. The role of DSA as the gold standard should be reviewed and needs to be reconsidered.

Objective: To make an initial assessment of the correlation between immersive virtual reality–based (ILBT) line bisection testing and paper-and-pencil–based line bisection (PLBT) testing in healthy subjects. Design: Diagnostic study. Setting: Research laboratory. Participants: Twenty healthy adults (51.5 [11.0] years old, 55% women; N=20). Interventions: Participants underwent an ILBT and a conventional PLBT in near space (NS) and more distant space (MDS). Correlations between the ILBT and PLBT, deviation rates in the NS and MDS, horizontal gaze distribution, and presence of virtual reality sickness (VRS) were evaluated. Main Outcome Measures: Correlation between the deviation rates of the PLBT and ILBT. Results: There was no significant correlation between the ILBT and PLBT for evaluating the deviation rate of the line bisection test (LBT). There was no significant difference in the deviation rate of the LBTs between the NS and MDS, but there was a significant difference in the horizontal line-of-sight distribution. VRS was not observed as an adverse event. Conclusions: In healthy adult subjects, our results suggested that there was no significant correlation between the deviation rates of the ILBT and PLBT. We also found that the ILBT is a useful and safe method for evaluating the horizontal line-of-sight distribution and percentage deviation of line segments from the center in the NS and MDS without inducing VRS.

Objectives: To make recommendations on the diagnosis and treatment of post-extubation laryngitis (PEL) in children with or without other comorbidities. Methods: A three-iterative modified Delphi method was applied. Specialists were recruited representing pediatric otolaryngologists, pediatric and neonatal intensivists. Questions and statements approached topics encompassing definition, diagnosis, endoscopic airway evaluation, risk factors, comorbidities, management, and follow-up. A consensus was defined as a supermajority >70%. Results: Stridor was considered the most frequent symptom and airway endoscopy was recommended for definitive diagnosis. Gastroesophageal reflux and previous history of intubation were considered risk factors. Specific length of intubation did not achieve a consensus as a risk factor. Systemic corticosteroids should be part of the medical treatment and dexamethasone was the drug of choice. No consensus was achieved regarding dosage of corticosteroids, although endoscopic findings help defining dosage and length of treatment. Non-invasive ventilation, laryngeal rest, and use of comfort sedation scales were recommended. Indications for microlaryngoscopy and bronchoscopy under anesthesia were symptoms progression or failure to improve after the first 72-h of medical treatment post-extubation, after two failed extubations, and/or suspicion of severe lesions on flexible fiberoptic laryngoscopy. Conclusions: Management of post-extubation laryngitis is challenging and can be facilitated by a multidisciplinary approach. Airway endoscopy is mandatory and impacts decision-making, although there is no consensus regarding dosage and length of treatment.

Excessive consumption of antibiotics like gentamicin (GEN) can lead to hostile effects as antibiotic resistance. Therefore, the detection is important for which, reduced graphene oxide-Gadolinium oxide nanocomposite (rGO@Gd2O3 NC) was composed through co-precipitation method for the detection of GEN. The structural, morphological and functional group characterizations were done using XRD, FT-IR, SEM and TEM techniques. The cyclic voltammetry (CV) showed excellent electrocatalytic activity and superior performance towards GEN detection. Through the use of GEN monoclonal antibodies (anti-GEN) on a screen-printed electrode (SPE), a very sensitive electrochemical immunosensor was fabricated. Covalent interactions were employed to construct the electrochemical immunosensor, while bovine serum albumin (BSA) was employed as a blocking agent on the anti-GEN/rGO@Gd2O3/SPE electrode surface. The analysis of the CV response of the BSA/anti-GEN/rGO@Gd2O3/SPE bioelectrode demonstrated linear detection range from 1 pM – 100 μM, along with limit of detection (LOD) of 0.424 pM and sensitivity of 44.87 μA pM-1 cm− 2. Additionally, rGO@Gd2O3 immunosensor, exhibited a good level of linearity with R2 value of 0.978. These findings indicate the excellent potential of the rGO@Gd2O3 electrochemical immunosensor for accurately detecting GEN in spiked milk samples at different concentrations.

The objective of this study was to investigate the morphological and chemical properties of hemp bast RPF1 variety fiber to be used as a potential raw material for filter paper production.Experimental handsheet samples with basis weight of 20 g/m2 were manufactured using mixture of hemp and softwood pulp at various beating levels. The average fiber length and width of hemp bast fiber were determined as 5.76 mm and 32.53 μm, respectively. It was also found that the hemp bast fiber had rigid thick cell wall with small size of lumen. The overall chemical properties of hemp bast were similar to those fibers from other bast sources as well as softwood fibers. It seems that hemp bast was easily pulped under various soda process conditions yielding pulp ranging from 51.36 % to 52.56 % and Kappa numbers ranging from 2.89 to 8.18. Based on the findings in this study hemp bast fiber could be considered as a potential to manufacture filter paper with accepted characteristics.

In recent years, due to the increase in their global popularity, short video applications have become an important topic of research. The number of users has now exceeded one billion in China; accordingly, Chinese researchers have conducted many studies on short videos. Their findings can serve as important references for both theoretical research on and the practical development of short videos worldwide. In this study, we used bibliometrics method and the CiteSpace application to analyze the content of 2163 representative research papers on short videos published in China from 2012 to 2022. The number of such papers is increasing annually in China; moreover, several core groups of authors and research institutions focusing on short video research have already been formed. Some popular topics of research on these videos include the main characteristics of short videos, phenomenon of media convergence based on short videos, and application scenarios of short videos. Over the years, research on the popular short video application Douyin has been increasing, as well. The research results indicate that issues such as the marketing of short knowledge videos, standardized management of short video platforms, and impact of these videos on the education of college students are expected to become popular subjects of scholarly research in the near future.

This paper introduces Heliyon's Business and Management Section, established in 2023 as a platform committed to maintaining rigorous ethical and scientific publishing standards within the field. Prioritizing scientific correctness and technical soundness over mere novelty, it encompasses a wide range of research domains, encouraging contributions from scholars across diverse backgrounds. Within this guide, we provide insights into the process of preparing effective papers and offer constructive guidelines for the reviewing process. Authors will find valuable tools to align their work with the journal's expectations, incorporating current literature to enhance the probability of successful publication. Both aspiring authors and reviewers will benefit from this resource, which emphasizes academic and professional growth. By promoting collaboration and upholding high-quality standards, we aim to fortify the scholarly publishing community and advance knowledge in the field of business and management.

A novel Coumarin-based 1,2-pyrazole, HCPyTSC is synthesised and characterized. The chemosensor has been shown to have efficient colourimetric and fluorescence sensing capabilities for the quick and selective detection of fluoride and copper ions. At 376 and 430 nm, the HCPyTSC exhibits selective sensing for Cu2+ and F− ions. By examining the natural bond orbital (NBO) analysis and the potential energy curve (PES) of the ground state for the function of the C–H bond, it has been determined from the theoretical study at hand that the deprotonation was taken from the ‘CH’ proton of the pyrazole ring. For F− and Cu2+, the HCPyTSC detection limits were 4.62 nM and 15.36 nM, respectively. Similarly, the binding constants (Kb) for F− and Cu2+ ions in acetonitrile medium were found to be 2.06 × 105 M−1 and 1.88 × 105 M−1. Chemosensor HCPyTSC with and without F− and Cu2+ ions have an emission and absorption response that can imitate a variety of logic gates, including the AND, XOR, and OR gates. Additionally, a paper-based sensor strip with the HCPyTSC was created for use in practical, flexible F− sensing applications. The paper-based sensor was more effective in detecting F− than other anions. The effectiveness of HCPyTSC for the selective detection of F− in living cells as well as its cell permeability were examined using live-cell imaging in T24 cells.

Background & Aims: Progressive familial intrahepatic cholestasis (PFIC) relates to a group of rare, debilitating, liver disorders which typically present in early childhood, but have also been reported in adults. Without early detection and effective treatment, PFIC can result in end-stage liver disease. The aim of the paper was to put forward recommendations that promote standardisation of the management of PFIC in clinical practice. Methods: A committee of six specialists came together to discuss the challenges faced by physicians in the management of PFIC. The committee agreed on two key areas where expert guidance is required to optimise care: (1) how to diagnose and treat patients with a clinical presentation of PFIC in the absence of clear genetic test results/whilst awaiting results, and (2) how to monitor disease progression and response to treatment. A systematic literature review was undertaken to contextualise and inform the recommendations. Results: An algorithm was developed for the diagnosis and treatment of children with suspected PFIC. The algorithm recommends the use of licensed inhibitors of ileal bile acid transporters as the first-line treatment for patients with PFIC and suggests that genetic testing be used to confirm genotype whilst treatment is initiated in patients in whom PFIC is suspected. The authors recommend referring patients to an experienced centre, and ensuring that monitoring includes measurements of pruritus, serum bile acid levels, growth, and quality of life following diagnosis and during treatment. Conclusions: The algorithm presented within this paper offers guidance to optimise the management of paediatric PFIC. The authors hope that these recommendations will help to standardise the management of PFIC in the absence of clear clinical guidelines. Impact and implications: This opinion paper outlines a consistent approach to the contemporaneous diagnosis, monitoring, referral and management of children with progressive familial intrahepatic cholestasis. This should assist physicians given the recent developments in genetic diagnosis and the availability of effective drug therapy. This manuscript will also help to raise awareness of current developments and educate health planners on the place for new drug therapies in progressive familial intrahepatic cholestasis.

Introduction: In the first part of this White Paper, the European Association of Neurosurgical Societies (EANS) Diversity in Neurosurgery Committee (DC) addressed the obstacles faced by neurosurgeons when planning to have a family and practice during pregnancy, attempting to enumerate potential, easily implementable solutions for departments to be more family-friendly and retain as well as foster talent of parent-neurosurgeons, regardless of their gender identity and/or sexual orientation. Attrition avoidance amongst parent-neurosurgeons is at the heart of these papers. Research question: In this second part, we address the obstacles posed by practice with children and measures to mitigate attrition rates among parent-neurosurgeons. For the methodology employed to compose this White Paper, please refer to Supplementary Electronic Materials (SEM) 1. Materials and methods: For composing these white papers, the European Association of Neurosurgical Societies (EANS)'s Diversity Committee (DC) recruited neurosurgeon volunteers from all member countries, including parents, aspiring parents, and individuals without any desire to have a family to create a diverse and representative working group (WG). Results: In spite of the prevailing heterogeneity in policies across the continent, common difficulties can be identified for both mothers and fathers considering the utilization of parental leave. Discussion and conclusion: Reconciliation of family and a neurosurgical career is challenging, especially for single parents. However, institutional support in form of childcare facilities and/or providers, guaranteed lactation breaks and rooms, flexible schedule models including telemedicine, and clear communication of policies can improve working conditions for parent-neurosurgeons, avoid their attrition, and foster family-friendly work environments.

Traditional PFAS analysis by mass spectrometry (MS) is time-consuming, as laborious sample preparation (e.g., extraction and desalting) is necessary. Herein, we report fast detection of PFAS by paper spray (PS)-based MS techniques, which employs a triangular-shaped filter paper for sample loading and ionization (≤ 3 min per sample). In this study, PS-MS was first used for direct PFAS analysis of drinking water, tap water, and wastewater. Interestingly, food package paper materials can be directly cut and examined with PS-MS for possible PFAS contamination. For samples containing salt matrices which would suppress PFAS ion signal, desalting paper spray mass spectrometry (DPS-MS), was shown to be capable of rapidly desalting, ionizing and detecting PFAS species such as per-fluorooctanoic acid (PFOA) and per-fluorosulphonic acid (PFOS). The retention of PFAS on paper substrate while salts being washed away by water is likely due to hydrophilic interaction between the PFAS polar head (e.g., carboxylic acid, sulfonic acid) with the polar filter paper cellulose surface. The DPS-MS method is highly sensitive (limits of detection:1.2-4.5 ppt) and can be applicable for directly analyzing soil extract and soil samples. These results suggest the high potential of PS-MS and the related DPS-MS technique in real-world environmental analysis of PFAS., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Ageing of paper is a complex process of great relevance for application purposes because of its widespread use as support for information storage in books and documents, and as common low-cost and green packaging material, to name a few. A key factor in paper ageing is the oxidation of cellulose, a macromolecule of natural origin that constitutes the main chemical component of paper. Such a complex process results in changes in the cellulose polymeric chains in chemical and structural properties. The scope of this work is to explore the effects of oxidation of cellulose as one of the principal mechanisms of ageing of paper using a fluorescence-based approach. To this aim, fluorescence-lifetime imaging microscopy (FLIM) measurements on pure cellulose samples stained using Carbotrace 680 dye were performed, and data were analyzed by phasor approach. The comparison with results from conventional techniques allowed to map paper microstructure as a function of the sample oxidation degree correlating the fluorescence-lifetime changes to cellulose oxidation. A two-step oxidation kinetics that produced specific modification in paper organization was highlighted indicating that FLIM measurements using Carbotrace 680 dye may provide a simple tool to obtain information on the oxidation process also adding spatial information at sub-micrometric scale., Competing Interests: Declaration of competing interest The authors declare that they have no competing interests., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Choosing an inappropriate method of sample collection can often have a detrimental impact on DNA recovery. Multiple studies highlight the importance of selecting the recovery method based on the type of surface the DNA sample is located on. This study aimed to investigate the efficacy of sample collection via the single cotton swabbing method in comparison to recovery directly from the material cut from the surface. The three types of surfaces included cotton, paper, and cardboard. DNA sources comprised cell-free and cellular DNA, as well as blood and saliva as examples of body fluids commonly encountered at crime scenes. The data analysis revealed that the cutting-out method resulted in higher DNA recovery from all but cardboard surfaces, making it the more efficient collection method. Despite its limitations, the cutting-out method should be considered as the DNA recovery method of choice when suitable.

Summary: As a developing region, Latin America faces unique cancer control and prevention challenges, which are intensified when considering rare cancers, including sarcomas. Sarcomas are a group of malignancies that arise in the connective tissues of the body—such as muscle, fat, nerves, blood vessels, and bones—accounting for a diverse range of tumours that, although rare, require specialized attention. Sarcoma care and research in Latin America require a comprehensive approach that includes deeper epidemiologic knowledge, diagnostic capacity building, access to innovative treatments, increased patient advocacy, and strengthening of clinical research capacity. This article will review current challenges and opportunities for treating patients with sarcoma in Latin America and outline a pathway toward improvement for regional collaborative groups.

In this article, Photonic crystal fiber (PCF) based surface plasmon resonance (SPR) sensor is proposed for detecting cancerous cells like Hela for cervical cancer and Basal for skin cancer. The numerical analysis and simulation of the designed biosensor is carried out using the finite element method in conjunction with a layer that is perfectly matched. The PCF sensor based on SPR has a gold layer for the plasmonic effect and a nanolayer of TiO2 to form an adhesion layer in between the gold and silica. The sensor can detect an analyte's refractive index (RI) between 1.360 and 1.392 for two distinct cancerous cell types (Hela and Basal). The proposed biosensor's performance is evaluated using amplitude and wavelength investigation techniques. This study achieves the wavelength sensitivity of 6250 nm/RIU, 5000 nm/RIU, and the amplitude sensitivity of 909.05 RIU−1, 505.53 RIU−1 for Hela and Basal cells, respectively. The results show that the proposed sensor is suitable for real-time biosensing applications.

Herein, we fabricate a melamine modified metal organic framework-199 composite (MOF-199@melamine), of which the structure is affected by the dynamics of the guest H 2 O molecule with significant color change. It realizes the visualized quantitative detection of water in a variety of organic solvents within 30 s. Moreover, DMF restored the original structure by replacing H 2 O molecules, realizing the regeneration of the materials. On this basis, PTFE-MOF-199@melamine test paper is developed to portably detect water content in organic solvents (maximum 0 %-98 % (v/v) water content) and ambient relative humidity (11-85 %). The test paper can be recycled four times with a regeneration rate higher than 90 %. The results are expected to solve the problems of existed electrochemical or fluorescence strategy such as the complicated operation process and signal output/reading system., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

A simple paper-based chromatography coupling with nickel foam decorated Au nanodendrite (PP-AuND/NiF) was fabricated for simultaneous separation and surface-enhanced Raman scattering (SERS) detection of Rhodamine-6G (R6G) from a mixture of analytes. The three-dimensional porous nickel foam (NiF) was employed as a sampling diffusion platform, and AuND with a high surface active area beneficial for SERS efficiency was electro-deposited directly onto the NiF frame. The structure of AuND/NiF was characterized by X-ray diffraction and scanning electron microscopy. The AuND/NiF could detect R6G at 0.1 nM, and the enhancement factor was 1.84 x 10 6 . The AuND/NiF was durable, with a slight signal decrease after 6 m of drop-testing. Also, upon three days of exposure to ambient air, the signal droped only 3.35 %. Subsequently, the PP-AuND/NiF was constructed by directly situating AuND/NiF on a paper strip, serving as a sample in and out to AuND/NiF. A mixture of two SERS active compounds, namely 2-Naphthalenethiol (2-NpSH) and Rhodamine 6G (R6G), was prepared in ethanol: water (1:1) solution to evaluate PP-AuND/NiF separation capability. Raman measurements along different distances of AuND/NiF were performed, and the signal of 2-NpSH was dismissed after 3.0 mm, while R6G's signals were observed throughout AuND/NiF. In general, the PP-AuND/NiF demonstrated effective separation and SERS measurement of analytes in a mixture, which could be applicable for more complex samples in the future, especially in clinical analysis., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Tung Duy Vu reports financial support was provided by Vingroup Innovation Foundation. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Chicken anemia virus (CAV) is one of the primary causes of morbidity and mortality in young chickens. Given the importance of timely detection for maintaining livestock quality, there is a pressing need for rapid and field-deployable diagnostic tools. This study introduces a highly sensitive paper-based electrochemical immunosensor (PEI) for the detection of the 60 amino acid N-terminally truncated viral protein 1 (Δ60VP1), a derivative of the CAV capsid (VP1). A custom antibody was produced for precise immunoassay detection, with results obtainable within 30 min using Square Wave Voltammetry (SWV). The underlying mechanism involves an immunocomplex in the sample zone that hinders the electron transfer of redox species, thereby reducing the current signal in proportion to the Δ60VP1 concentration. Under optimal conditions, the detection linearity for Δ60VP1 ranged from 80 to 2500 ng/mL, with a limit of detection (LoD) of 25 ng/mL. This device was then successfully applied to detect VP1 in 29 chicken serum samples, achieving 91.6% sensitivity and 94.1% selectivity. In conclusion, the PEI device presents a promising solution for rapid, sensitive, and disposable detection of chicken pathogens, potentially revolutionizing productivity and quality assurance in chicken farming., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Pyrolysis holds immense potential for clean treatment of pulp and paper mill sludge (PPMS), enabling efficient energy and chemical recovery. However, current understanding of PPMS pyrolysis kinetics and product characteristics remains incomplete. This study conducted detailed modeling of pyrolysis kinetics for two typical PPMSs from a wastepaper pulp and paper mill, namely, deinking sludge (PPMS-DS) and sewage sludge (PPMS-SS), and analyzed comprehensively pyrolysis products. The results show that apparent activation energy of PPMS-DS (169.25-226.82 kJ/mol) and PPMS-SS (189.29-411.21 kJ/mol) pyrolysis undergoes significant change, with numerous parallel reactions present. A distributed activation energy model with dual logistic distributions proves to be suitable for modeling thermal decomposition kinetics of both PPMS-DS and PPMS-SS, with coefficient of determination >0.999 and relative root mean square error <1.99 %. High temperature promotes decomposition of solid organic materials in PPMS, and maximum tar yield for both PPMS-DS (53.90 wt%, daf) and PPMS-SS (56.48 wt%, daf) is achieved at around 500 °C. Higher levels of styrene (24.45 % for PPMS-DS and 14.71 % for PPMS-SS) and ethylbenzene (8.61 % for PPMS-DS and 8.33 % for PPMS-SS) are detected in tar and could be used as chemicals. This work shows great potential to propel development of PPMS pyrolysis technology, enabling green and sustainable production in pulp and paper industry., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Background: Alzheimer's disease (AD), one of the most prevalent neurodegenerative diseases, results in severe cognitive decline and irreversible memory loss. Early detection of AD is significant to patients for personalized intervention since effective cure and treatment methods for AD are still lacking. Despite the severity of the disease, existing highly sensitive AD detection methods, including neuroimaging and brain deposit-positive lesion tests, are not suitable for screening purposes due to their high cost and complicated operation. Therefore, these methods are unsuitable for early detection, especially in low-resource settings. Although regular paper-based microfluidics are cost-efficient for AD detection, they are restricted by a poor limit of detection (LOD)., Results: To address the above limitations, we report the ultrasensitive and low-cost nanocellulose paper (nanopaper)-based analytical microfluidic devices (NanoPADs) for detecting one of the promising AD blood biomarkers (glial fibrillary acidic protein, GFAP) using Surface-enhanced Raman scattering (SERS) immunoassay. Nanopaper offers advantages as a SERS substrate, such as an ultrasmooth surface, high optical transparency, and tunable chemical properties. We detected the target GFAP in artificial serum, achieving a LOD of 150 fg mL -1 ., Significance: The developed NanoPADs are distinguished by their cost-efficiency and ease of implementation, presenting a promising avenue for effective early detection of AD's GFAP biomarker with ultrahigh sensitivity. More importantly, our work provides the experimental routes for SERS-based immunoassay of biomarkers on NanoPADs for various diseases in the future., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this study, a novel fluorescent nanoprobe (ZIF-90@FSS) was constructed using a zeolite imidazolium ester skeleton (ZIF-90) incorporating sodium fluorescein within its porous structure. Notably, this nanoprobe exhibited regular fluorescence "off" detection performance of Fe 3+ in actual samples and living cells. The concentration range of 0-150 ng/mL exhibited a lowest detection limit of 0.26 ng/mL. A nanofiber paper-based platform (VL78/ZIF-90@FSS) was further developed by coupling the prepared nanoprobe to a multi-dimensional fiber paper via CN bonds, enabling rapid visual white light colorimetric and fluorescence imaging of Fe 3+ within 2 min. The constructed nanoprobe and its paper-based detection platforms demonstrated a stable recovery range in tap water, beer, and soy sauce samples during spiking-recovery assessments. The recovery rates ranged from 98.46 % to 108.24 % for the nanoprobe and from 91.75 % to 108.71 % for the nanofiber paper-based platform. Therefore, the developed nano-fluorescent sensor and paper-based nanofiber sensing platform offer a promising strategy for the visual detection of Fe 3+ , while also presenting novel and valuable methods to investigate the regulatory mechanisms of Fe 3+ in living cells., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

A microfluidic paper-based analytical device (μPAD) utilizing gas-diffusion separation and solid-phase reduction was developed for the first time for the determination of both ammonium and nitrate, which are the dominant inorganic nitrogen species in environmental waters. The device consists of 3 filter paper layers accommodating the sample, reagent and detection zones. The reagent zone is separated from the detection zone by a semipermeable hydrophobic membrane and acts as a solid-phase reactor where nitrate is reduced to ammonia by Devarda's alloy microparticles, integrated into a μPAD for the first time. The detection zone incorporates the acid-base indicators bromothymol blue (BTB) or nitrazine yellow (NY) and changes colour in two steps. Initially the colour change is caused by ammonia generated by the reaction of ammonium and sodium hydroxide in the sample zone. This colour change is followed by a subsequent colour change as a result of the ammonia produced by the reduction of nitrate by the Devarda's alloy microparticles. The corresponding reflectance value changes are used for the quantification of the two inorganic nitrogen species in the ranges 6.5-100.0 or 2.1-15.0 mg N L -1 for ammonium and 18.2-100.0 or 4.2-15.0 mg N L -1 for nitrate when BTB or NY are used, respectively. Under optimal conditions the limits of quantification of ammonium and nitrate in the case of BTB were determined as 6.5 and 18.2 mg N L -1 , respectively, while the corresponding values in the case of NY were found to be 2.1 and 4.2 mg N L -1 . The newly developed μPAD was stable for 62 days when stored in a freezer and 1 day at ambient temperature. It was validated with a certified reference material and successfully applied to the determination of ammonium and nitrate in spiked environmental water samples and soil extracts., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

This work describes the development of a microfluidic paper-based analytical device (μPAD) for the determination of copper in fresh and marine waters. A functionalized rhodamine-based chelator was synthesized and used as a chromogenic reagent, forming a highly intense pink complex with the analyte. The aim was to create a paper device that offers optimal performance and provides in-situ, rapid and cost-effective analysis in line with World Health Organization guidelines. The influence on the determination of several physical and chemical parameters was evaluated aiming to achieve the best performance. Under optimised conditions, a linear correlation was established in the range of 0.05-0.50 mg L -1 of copper, with a limit of detection of 10 μg L -1 . The accuracy of the proposed method was assessed by comparing the results obtained with the developed μPAD and the results obtained with Inductively Coupled Plasma measurements (RE < 10 %). Recovery studies were also performed using different types of water samples with no need for any prior sample pre-treatment: tap, well, river and seawater. The average recovery percentage of 101 % (RSD = 4.3 %) was obtained, a clear indication of no multiplicative matrix interferences., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Paper-based microfluidic devices offer advantages such as low cost and disposability for point-of-care diagnostic applications. However, actuation of fluids on paper can be a challenge in multi-step and complex assays. In this work, a thermally programmable time-delay switch (TPTDS) is presented which operates by causing delays in the fluid path of a microfluidics paper-based analytical device (μPAD) by utilizing screen-printed wax micro-bridges. The time-delay is achieved through an electrical power feedback loop which indirectly adjusts the temperature of each individual micro-bridge, melting the wax into the paper. The melted wax manipulates the fluid flow depending on its penetration depth into the paper channel, which is a function of the applied temperature. To demonstrate functionality of the proposed method, the TPTDS is employed to automate and perform the nitrate assay which requires sequential delivery of reagents. Colorimetric detection is used to quantify the results by utilizing an electronic color sensor., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This article presents the development of a photothermal biosensing integrated with microfluidic paper-based analytical device (PT-μPAD) as a quantitative biosensor method for monitoring sarcosine in human control urine, plasma, and serum samples. The device utilizes gold nanoparticles (AuNPs) as both a peroxidase-like nanozyme and a photothermal substrate to enable sarcosine detection. In our PT-μPAD, hydrogen peroxide (H 2 O 2 ) is generated through the oxidation of sarcosine by a sarcosine oxidase (SOx) enzyme. Subsequently, the H 2 O 2 flows through the paper microchannels to the detection zone, where it etches the pre-deposited AuNPs, inducing a temperature change upon exposure by a 532 nm laser. The temperature variation is then measured using a portable and inexpensive infrared thermometer. Under optimized conditions, we obtained a linear range between 10.0 and 40.0 nmol L -1  (R 2  = 0.9954) and a detection limit (LOD) of 32.0 pmol L -1 . These values fall within the clinical range for sarcosine monitoring in prostate cancer diagnostics in humans. Moreover, our approach exhibits high selectivity without interfering effects. Recovery studies in various human control samples demonstrated a range of 99.05-102.11 % with the highest RSD of 2.25 %. The PT-μPAD was further validated for sarcosine determination in human control urine and compared with a commercial ELISA assay, revealing no significant difference between these two methods at a 95 % confidence level. Overall, our proposed sarcosine biosensor is well-suited for prostate cancer monitoring, given its affordability, sensitivity, and user-friendliness, even for unskilled individuals. Moreover, this strategy has promising prospects for broader applications, potentially detecting various biomarkers as a point-of-care (POC) diagnostic tool., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)